dbus Doxyfile.in, 1.9, 1.10 Makefile.am, 1.26, 1.27 configure.in,
1.154, 1.155 dbus-glib-1.pc.in, 1.3, NONE
John Palmieri
johnp at kemper.freedesktop.org
Fri Jul 14 09:20:12 PDT 2006
- Previous message: dbus/gcj .cvsignore, 1.2, NONE Makefile.am, 1.3,
NONE TestMessage.java, 1.1, NONE
- Next message: dbus/mono/example .cvsignore, 1.2, NONE BusListener.cs, 1.2,
NONE EchoClient.cs, 1.1, NONE EchoServer.cs, 1.1,
NONE Echoer.cs, 1.1, NONE Makefile.am, 1.9, NONE
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
Update of /cvs/dbus/dbus
In directory kemper:/tmp/cvs-serv13751
Modified Files:
Doxyfile.in Makefile.am configure.in
Removed Files:
dbus-glib-1.pc.in
Log Message:
* Remove all bindings
Index: Doxyfile.in
===================================================================
RCS file: /cvs/dbus/dbus/Doxyfile.in,v
retrieving revision 1.9
retrieving revision 1.10
diff -u -d -r1.9 -r1.10
--- Doxyfile.in 2 Jun 2004 13:13:14 -0000 1.9
+++ Doxyfile.in 14 Jul 2006 16:20:10 -0000 1.10
@@ -49,7 +49,7 @@
#---------------------------------------------------------------------------
# configuration options related to the input files
#---------------------------------------------------------------------------
-INPUT = dbus glib
+INPUT = dbus
FILE_PATTERNS = *.c *.h
RECURSIVE = YES
#EXCLUDE = test
Index: Makefile.am
===================================================================
RCS file: /cvs/dbus/dbus/Makefile.am,v
retrieving revision 1.26
retrieving revision 1.27
diff -u -d -r1.26 -r1.27
--- Makefile.am 30 Apr 2006 11:07:01 -0000 1.26
+++ Makefile.am 14 Jul 2006 16:20:10 -0000 1.27
@@ -1,56 +1,15 @@
-
-if HAVE_GLIB
- GLIB_SUBDIR=glib
- GLIB_PC=dbus-glib-1.pc
-endif
-
-if HAVE_QT
- QT_SUBDIR=qt
- QT_PC=dbus-qt4-1.pc
-endif
-
-if HAVE_QT3
- QT3_SUBDIR=qt3
-endif
-
-if DBUS_USE_GCJ
- GCJ_SUBDIR=gcj
-endif
-
-if DBUS_USE_CSC
- MONO_SUBDIR=mono
- MONO_PC=dbus-sharp.pc
-endif
-
-if HAVE_PYTHON
- PYTHON_SUBDIR=python
-endif
-
-## really we should require gcj/mcs/python also but since they are
-## annoying to install, we don't for now
-dist-local:
- if test -z "$(QT_SUBDIR)" || test -z "$(GLIB_SUBDIR)" ; then \
- echo "You have to build with Qt and GLib to make dist" ; \
- fi
-
-SUBDIRS=dbus bus doc $(GLIB_SUBDIR) $(GCJ_SUBDIR) $(MONO_SUBDIR) $(QT_SUBDIR) $(QT3_SUBDIR) $(PYTHON_SUBDIR) tools test
-DIST_SUBDIRS=dbus bus doc glib qt qt3 gcj mono python tools test
+SUBDIRS=dbus bus doc tools test
+DIST_SUBDIRS=dbus bus doc tools test
pkgconfigdir = $(libdir)/pkgconfig
-pkgconfig_DATA = dbus-1.pc $(GLIB_PC) $(QT_PC) $(MONO_PC)
+pkgconfig_DATA = dbus-1.pc
DISTCLEANFILES = \
- dbus-1.pc \
- $(GLIB_PC) \
- $(QT_PC) \
- $(MONO_PC)
+ dbus-1.pc
EXTRA_DIST = \
HACKING \
- dbus-1.pc.in \
- dbus-glib-1.pc.in \
- dbus-qt4-1.pc.in \
- dbus-sharp.pc.in
+ dbus-1.pc.in
all-local: Doxyfile
@@ -61,7 +20,7 @@
clean-bbg:
find -name "*.bbg" -o -name "*.bb" | xargs rm || true
-GCOV_DIRS=dbus bus $(GLIB_SUBDIR) $(QT_SUBDIR)
+GCOV_DIRS=dbus bus
## .PHONY so it always rebuilds it
.PHONY: coverage-report.txt
Index: configure.in
===================================================================
RCS file: /cvs/dbus/dbus/configure.in,v
retrieving revision 1.154
retrieving revision 1.155
diff -u -d -r1.154 -r1.155
--- configure.in 9 Jun 2006 21:43:14 -0000 1.154
+++ configure.in 14 Jul 2006 16:20:10 -0000 1.155
@@ -46,13 +46,6 @@
AC_ISC_POSIX
AC_HEADER_STDC
-AC_ARG_ENABLE(qt, AS_HELP_STRING([--enable-qt],[enable Qt-friendly client library]),enable_qt=$enableval,enable_qt=auto)
-AC_ARG_ENABLE(qt-debug, AS_HELP_STRING([--enable-qt-debug],[enable Qt-friendly client library, linked to debug Qt libraries]),enable_qt_debug=$enableval,enable_qt_debug=no)
-AC_ARG_WITH(qt_moc, AS_HELP_STRING([--with-qt-moc=<path>],[moc for Qt]))
-AC_ARG_ENABLE(qt3, AS_HELP_STRING([--enable-qt3],[enable Qt3-friendly client library]),enable_qt3=$enableval,enable_qt3=auto)
-AC_ARG_WITH(qt3_moc, AS_HELP_STRING([--with-qt3-moc=<path>],[moc for Qt3]))
-AC_ARG_ENABLE(glib, AS_HELP_STRING([--enable-glib],[enable GLib-friendly client library]),enable_glib=$enableval,enable_glib=auto)
-AC_ARG_ENABLE(gtk, AS_HELP_STRING([--enable-gtk],[enable GTK-requiring executables]),enable_gtk=$enableval,enable_gtk=auto)
AC_ARG_ENABLE(tests, AS_HELP_STRING([--enable-tests],[enable unit test code]),enable_tests=$enableval,enable_tests=$USE_MAINTAINER_MODE)
AC_ARG_ENABLE(ansi, AS_HELP_STRING([--enable-ansi],[enable -ansi -pedantic gcc flags]),enable_ansi=$enableval,enable_ansi=no)
AC_ARG_ENABLE(verbose-mode, AS_HELP_STRING([--enable-verbose-mode],[support verbose debug mode]),enable_verbose_mode=$enableval,enable_verbose_mode=$USE_MAINTAINER_MODE)
@@ -62,10 +55,6 @@
AC_ARG_ENABLE(doxygen-docs, AS_HELP_STRING([--enable-doxygen-docs],[build DOXYGEN documentation (requires Doxygen)]),enable_doxygen_docs=$enableval,enable_doxygen_docs=auto)
AC_ARG_ENABLE(gcov, AS_HELP_STRING([--enable-gcov],[compile with coverage profiling instrumentation (gcc only)]),enable_gcov=$enableval,enable_gcov=no)
AC_ARG_ENABLE(abstract-sockets, AS_HELP_STRING([--enable-abstract-sockets],[use abstract socket namespace (linux only)]),enable_abstract_sockets=$enableval,enable_abstract_sockets=auto)
-AC_ARG_ENABLE(gcj, AS_HELP_STRING([--enable-gcj],[build gcj bindings]),enable_gcj=$enableval,enable_gcj=no)
-AC_ARG_ENABLE(mono, AS_HELP_STRING([--enable-mono],[build mono bindings]),enable_mono=$enableval,enable_mono=no)
-AC_ARG_ENABLE(mono_docs, AS_HELP_STRING([--enable-mono-docs],[build mono docs]),enable_mono_docs=$enableval,enable_mono_docs=no)
-AC_ARG_ENABLE(python, AS_HELP_STRING([--enable-python],[build python bindings]),enable_python=$enableval,enable_python=auto)
AC_ARG_ENABLE(selinux, AS_HELP_STRING([--enable-selinux],[build with SELinux support]),enable_selinux=$enableval,enable_selinux=auto)
AC_ARG_ENABLE(dnotify, AS_HELP_STRING([--enable-dnotify],[build with dnotify support (linux only)]),enable_dnotify=$enableval,enable_dnotify=auto)
AC_ARG_ENABLE(console-owner-file, AS_HELP_STRING([--enable-console-owner-file],[enable console owner file]),enable_console_owner_file=$enableval,enable_console_owner_file=auto)
@@ -190,142 +179,8 @@
fi
fi
-#### can't use AM_PROG_GCJ since it fails fatally if no gcj found
-AC_CHECK_PROGS(GCJ, gcj, gcj)
-if test -z "$GCJ" ; then
- have_gcj=no
-else
- # Needs to be here so libtool wont get confused
- AM_PROG_GCJ
-
- have_gcj=yes
- if test "x${GCJFLAGS-unset}" = xunset; then
- GCJFLAGS="-g -O2 -Wall"
- fi
- AC_SUBST(GCJFLAGS)
-fi
-
-if test x$enable_gcj = xauto ; then
- if test x$have_gcj = xno ; then
- enable_gcj=no
- else
- enable_gcj=yes
- fi
-fi
-
-if test x$enable_gcj = xyes; then
- if test x$have_gcj = xno ; then
- AC_MSG_ERROR([Building gcj explicitly required, but gcj not found])
- else
- AC_CHECK_PROGS(JAR, gcj-jar fastjar jar)
- fi
-fi
-
-AM_CONDITIONAL(DBUS_USE_GCJ, test x$enable_gcj = xyes)
-
AM_PROG_LIBTOOL
-#### Look for mono
-MONO_REQUIRED_VERSION=0.95
-AC_SUBST(MONO_REQUIRED_VERSION)
-PKG_CHECK_MODULES(MONO_DEPENDENCY, mono >= $MONO_REQUIRED_VERSION, have_mono=true, have_mono=false)
-
-if test "x$enable_mono" = "xyes"; then
- if test "x$have_mono" = "xfalse"; then
- AC_MSG_ERROR([Mono was not found])
- fi
-fi
-
-if test "x$have_mono" = "xtrue"; then
- if test `uname -s` = "Darwin"; then
- AC_PATH_PROG(RUNTIME, mint, no)
- AC_PATH_PROG(CSC, mcs, no)
- LIB_PREFIX=
- LIB_SUFFIX=.dylib
- else
- AC_PATH_PROG(RUNTIME, mono, no)
- AC_PATH_PROG(CSC, mcs, no)
- LIB_PREFIX=.so
- LIB_SUFFIX=
- fi
-else
- AC_PATH_PROG(CSC, csc.exe, no)
- RUNTIME=
- LIB_PREFIX=
- LIB_SUFFIX=.dylib
-fi
-
-if test x$enable_mono = xyes; then
- if test x$have_mcs = xno ; then
- AC_MSG_ERROR([Building Mono bindings explicitly required, but mcs compiler not found])
- fi
-
- ### Test for GACUTIL
- AC_PATH_PROG(GACUTIL, gacutil, no)
- if test "x$GACUTIL" = "xno" ; then
- AC_MSG_ERROR([No gacutil tool found])
- fi
-
- AC_SUBST(GACUTIL)
-fi
-
-if test x$enable_mono = xauto ; then
- if test x$CSC = xno ; then
- enable_mono=no
- else
- ### Test for GACUTIL
- AC_PATH_PROG(GACUTIL, gacutil, no)
- if test "x$GACUTIL" = "xno" ; then
- enable_mono=no
- else
- enable_mono=yes
- fi
- fi
-fi
-
-AC_SUBST(RUNTIME)
-AC_SUBST(CSC)
-AC_SUBST(GACUTIL)
-AC_SUBST(LIB_PREFIX)
-AC_SUBST(LIB_SUFFIX)
-
-AM_CONDITIONAL(DBUS_USE_CSC, test x$enable_mono = xyes)
-
-#### Look for monodoc
-MONODOC_REQUIRED_VERSION=0.16
-AC_SUBST(MONODOC_REQUIRED_VERSION)
-PKG_CHECK_MODULES(MONODOC_DEPENDENCY, monodoc >= $MONODOC_REQUIRED_VERSION, have_monodoc=yes, have_monodoc=no)
-
-if test x$enable_mono_docs = xyes; then
- if test x$have_monodoc = xno ; then
- AC_MSG_ERROR([Building Mono docs explicitly required, but monodoc not found])
- else
- AC_PATH_PROG(MONODOC, monodoc, no)
- if test x$MONODOC = xno; then
- AC_MSG_ERROR([Building Mono docs explicitly required, but monodoc not found])
- fi
- fi
-fi
-
-if test x$enable_mono_docs = xauto ; then
- if test x$have_monodoc = xno ; then
- enable_mono_docs=no
- MONODOC=
- else
- AC_PATH_PROG(MONODOC, monodoc, no)
- if test x$MONODOC = xno; then
- enable_mono_docs=no
- MONODOC=
- else
- enable_mono_docs=yes
- fi
- fi
-fi
-
-AC_SUBST(MONODOC)
-
-AM_CONDITIONAL(ENABLE_MONODOC, test "x$enable_mono_docs" = "xyes")
-
changequote(,)dnl
# let ourselves use our own unstable API
CPPFLAGS="-DDBUS_API_SUBJECT_TO_CHANGE=1 $CPPFLAGS"
@@ -885,230 +740,6 @@
AC_SUBST(DBUS_TEST_CFLAGS)
AC_SUBST(DBUS_TEST_LIBS)
-# Glib detection
-PKG_CHECK_MODULES(DBUS_GLIB, gobject-2.0 >= 2.4, have_glib=yes, have_glib=no)
-PKG_CHECK_MODULES(DBUS_GLIB_THREADS, gthread-2.0 >= 2.4, have_glib_threads=yes, have_glib_threads=no)
-
-if test x$have_glib = xno ; then
- AC_MSG_WARN([GLib development libraries not found])
-fi
-
-if test x$enable_glib = xyes; then
- if test x$have_glib = xno; then
- AC_MSG_ERROR([GLib explicitly required, and GLib development libraries not found])
- fi
-fi
-
-if test x$enable_glib = xno; then
- have_glib=no;
-fi
-
-AM_CONDITIONAL(HAVE_GLIB, test x$have_glib = xyes)
-AM_CONDITIONAL(HAVE_GLIB_THREADS, test x$have_glib_threads = xyes)
-
-if test x$have_glib = xyes; then
- GLIB_GENMARSHAL=`$PKG_CONFIG --variable=glib_genmarshal glib-2.0`
-else
- GLIB_GENMARSHAL=glib-not-enabled-so-there-is-no-genmarshal
-fi
-AC_SUBST(GLIB_GENMARSHAL)
-
-dnl GLib flags
-AC_SUBST(DBUS_GLIB_CFLAGS)
-AC_SUBST(DBUS_GLIB_LIBS)
-AC_SUBST(DBUS_GLIB_THREADS_LIBS)
-
-DBUS_GLIB_TOOL_CFLAGS=$XML_CFLAGS
-DBUS_GLIB_TOOL_LIBS="$XML_LIBS $INTLLIBS"
-AC_SUBST(DBUS_GLIB_TOOL_CFLAGS)
-AC_SUBST(DBUS_GLIB_TOOL_LIBS)
-
-# GTK detection
-if test x$have_glib = xno ; then
- AC_MSG_WARN([Can't use GTK+ since GLib not enabled])
- have_gtk=no
-else
- PKG_CHECK_MODULES(DBUS_GTK, gtk+-2.0 >= 2.4, have_gtk=yes, have_gtk=no)
- PKG_CHECK_MODULES(DBUS_GTK_THREADS, gtk+-2.0 >= 2.4 gthread-2.0, have_gtk_threads=yes, have_gtk_threads=no)
-fi
-
-if test x$have_gtk = xno ; then
- AC_MSG_WARN([GTK+ development libraries not found])
-fi
-
-if test x$enable_gtk = xyes; then
- if test x$have_gtk = xno; then
- AC_MSG_ERROR([GTK+ explicitly required, and GTK+ development libraries not found])
- fi
-fi
-
-if test x$enable_gtk = xno; then
- have_gtk=no;
-fi
-
-AM_CONDITIONAL(HAVE_GTK, test x$have_gtk = xyes)
-
-dnl Gtk flags
-AC_SUBST(DBUS_GTK_CFLAGS)
-AC_SUBST(DBUS_GTK_LIBS)
-AC_SUBST(DBUS_GTK_THREADS_CFLAGS)
-AC_SUBST(DBUS_GTK_THREADS_LIBS)
-
-
-dnl Qt3 detection
-if test -z "$with_qt3_moc" ; then
- AC_PATH_PROG(QT3_MOC, moc, no)
-else
- QT3_MOC=$with_qt3_moc
- AC_SUBST(QT3_MOC)
-fi
-
-have_qt3=no
-AC_MSG_CHECKING([for qglobal.h])
-if test -n "$QTDIR" -a -f "$QTDIR/include/qglobal.h"; then
- have_qt3=yes
- DBUS_QT3_CXXFLAGS="-I$QTDIR/include"
-else
- for dir in "${prefix}/include/qt" "/usr/include/qt-3.1" "/usr/include/qt3" "/usr/include/qt" "/usr/lib/qt/include" "/usr/lib/qt-3.1/include"; do
- if test -f "$dir/qglobal.h"; then
- have_qt3=yes
- DBUS_QT3_CXXFLAGS="-I$dir"
- DBUS_QT3_LIBS="-L$QTDIR/lib -lqt-mt"
- fi
- done
-fi
-if test x$have_qt3 = xyes; then
- AC_MSG_RESULT([found])
-else
- AC_MSG_RESULT([not found])
-fi
-
-if test x$have_qt3 = xno; then
- AC_MSG_WARN([Qt3 development libraries not found])
-fi
-
-if test x$enable_qt3 = xyes; then
- if test x$have_qt3 = xno; then
- AC_MSG_ERROR([Qt3 integration explicitly required, and Qt3 libraries not found])
- fi
-fi
-
-if test x$enable_qt3 = xno; then
- have_qt3=no;
-fi
-
-AM_CONDITIONAL(HAVE_QT3, test x$have_qt3 = xyes)
-
-dnl Qt3 flags
-AC_SUBST(DBUS_QT3_CXXFLAGS)
-AC_SUBST(DBUS_QT3_LIBS)
-
-
-dnl Qt4 detection
-
-AC_MSG_CHECKING([if we want to link to Qt debugging libraries])
-qt_suffix=
-if test x$enable_qt_debug = xyes; then
- qt_suffix=_debug
- AC_MSG_RESULT([debug])
-else
- AC_MSG_RESULT([release])
-fi
-
-if test x$enable_qt = xno; then
- have_qt=no
- have_qt_gui=no
- have_qtest=no
-else
- QT_CORE=QtCore$qt_suffix
- QT_XML=QtXml$qt_suffix
- QT_GUI=QtGui$qt_suffix
- QT_TESTLIB=QtTest$qt_suffix
- min_qt_version=4.1.3
-
- AC_SUBST(QT_CORE)
- AC_SUBST(QT_XML)
-
- PKG_CHECK_MODULES([DBUS_QT],
- [$QT_CORE >= $min_qt_version $QT_XML >= $min_qt_version],
- have_qt=yes,
- have_qt=no)
-fi
-
-dnl Check for moc too
-if test x$have_qt = xyes ; then
- AC_MSG_CHECKING([for moc])
-
- if test -z "$with_qt_moc" ; then
- QT_MOC=`$PKG_CONFIG --variable=exec_prefix $QT_CORE`
- QT_MOC=${QT_MOC}/bin/moc
- else
- QT_MOC=$with_qt_moc
- fi
-
- if test -x "$QT_MOC"; then
- AC_MSG_RESULT([found, $QT_MOC])
- else
- AC_MSG_RESULT([not found])
- AC_MSG_WARN([moc not found; disabling Qt])
- have_qt=no
- fi
-fi
-
-if test x$have_qt = xno ; then
- if test x$enable_qt = xyes; then
- AC_MSG_ERROR([Qt integration explicitly required, and Qt libraries not found])
- fi
- have_qt=no
-else
- dnl Qt4 flags
- AC_SUBST(DBUS_QT_CFLAGS)
- AC_SUBST(DBUS_QT_LIBS)
- AC_SUBST(QT_MOC)
-
- dnl QTestLib detection
- PKG_CHECK_MODULES([DBUS_QTESTLIB],
- [$QT_TESTLIB >= 4.1.0],
- have_qtest=yes,
- have_qtest=no)
-
- if test x$have_qtest = xno ; then
- AC_MSG_WARN([Qt Unit Test library not found])
- fi
-
- if test x$have_qt = xno; then
- have_qtest=no
- fi
-
- AC_SUBST(DBUS_QTESTLIB_CFLAGS)
- AC_SUBST(DBUS_QTESTLIB_LIBS)
-
- dnl QtGui detection
- PKG_CHECK_MODULES([DBUS_QT_GUI], [$QT_GUI >= $min_qt_version],
- have_qt_gui=yes,
- have_qt_gui=no)
-
- if test x$have_qt_gui = xyes ; then
- AC_MSG_CHECKING([for uic])
- QT_UIC=`$PKG_CONFIG --variable=exec_prefix $QT_GUI`/bin/uic
-
- if test -x "$QT_UIC" ; then
- AC_MSG_RESULT([found, $QT_UIC])
- else
- AC_MSG_RESULT([not found, disabling Qt Gui])
- have_qt_gui=no
- fi
- fi
-
- AC_SUBST(DBUS_QT_GUI_CFLAGS)
- AC_SUBST(DBUS_QT_GUI_LIBS)
- AC_SUBST(QT_UIC)
-fi
-
-AM_CONDITIONAL(HAVE_QT, test x$have_qt = xyes)
-AM_CONDITIONAL(HAVE_QT_GUI, test x$have_qt_gui = xyes)
-AM_CONDITIONAL(HAVE_QTESTLIB, test x$have_qtest = xyes)
-
### X11 detection
AC_PATH_XTRA
@@ -1343,8 +974,6 @@
TEST_PATH(SERVICE_DIR, data/valid-service-files)
TEST_PATH(SERVICE_BINARY, test-service)
TEST_PATH(SHELL_SERVICE_BINARY, test-shell-service)
-TEST_PATH(GLIB_SERVICE_BINARY, glib/test-service-glib)
-TEST_PATH(PYTHON_SERVICE_BINARY, python/test-service.py)
TEST_PATH(EXIT_BINARY, test-exit)
TEST_PATH(SEGFAULT_BINARY, test-segfault)
TEST_PATH(SLEEP_FOREVER_BINARY, test-sleep-forever)
@@ -1377,51 +1006,6 @@
AC_DEFINE_UNQUOTED(DBUS_SESSION_SOCKET_DIR, "$DBUS_SESSION_SOCKET_DIR", [Where per-session bus puts its sockets])
AC_SUBST(DBUS_SESSION_SOCKET_DIR)
-# Detect if we can build Python bindings (need python, python headers, and pyrex)
-if test x$enable_python = xno; then
- have_python=no
-else
- have_python_version=2.4
- AC_MSG_NOTICE([Checking to see if we can build Python bindings])
- have_python=no
- AM_PATH_PYTHON()
-
- if test -z "$PYTHON" ; then
- AC_MSG_WARN([Python not found])
- else
- AC_MSG_CHECKING([whether $PYTHON version >= $have_python_version])
- AM_PYTHON_CHECK_VERSION([$PYTHON], [$have_python_version],
- [have_python_version="yes"],
- [have_python_version="too old"])
-
- AC_MSG_RESULT($have_python_version)
-
- AC_CHECK_PROGS(PYREX, pyrexc)
-
- if test -z "$PYREX" ; then
- have_pyrex=no
- else
- have_pyrex=yes
- fi
-
- AM_CHECK_PYTHON_HEADERS(have_python_headers=yes,have_python_headers=no)
-
- if test x$have_pyrex = xyes -a x$have_python_headers = xyes -a "x$have_python_version" = xyes ; then
- have_python=yes
- fi
- fi
-
- if test x$have_python = xno ; then
- if test x$enable_python = xyes ; then
- AC_MSG_ERROR([Building python explicitly requested, but can't build python bindings because either Pyrex, Python headers or a suitable Python version was not found])
- else
- AC_MSG_WARN([Couldn't find either Pyrex, the Python headers or a suitable version of Python, not building Python bindings])
- fi
- fi
-fi
-
-AM_CONDITIONAL(HAVE_PYTHON, test x$have_python = xyes)
-
AC_OUTPUT([
Doxyfile
dbus/dbus-arch-deps.h
@@ -1432,49 +1016,21 @@
bus/dbus-daemon.1
Makefile
dbus/Makefile
-glib/Makefile
-glib/examples/Makefile
-glib/examples/statemachine/Makefile
-python/Makefile
-python/examples/Makefile
-qt/Makefile
-qt/dbus/Makefile
-qt/src/Makefile
-qt/tools/Makefile
-qt/examples/Makefile
-qt3/Makefile
-gcj/Makefile
-gcj/org/Makefile
-gcj/org/freedesktop/Makefile
-gcj/org/freedesktop/dbus/Makefile
-mono/Makefile
-mono/AssemblyInfo.cs
-mono/dbus-sharp.dll.config
-mono/example/Makefile
-mono/doc/Makefile
bus/Makefile
tools/Makefile
test/Makefile
-test/glib/Makefile
-test/python/Makefile
-test/qt/Makefile
test/name-test/Makefile
doc/Makefile
dbus-1.pc
-dbus-glib-1.pc
-dbus-sharp.pc
-dbus-qt4-1.pc
test/data/valid-config-files/debug-allow-all.conf
test/data/valid-config-files/debug-allow-all-sha1.conf
test/data/valid-service-files/debug-echo.service
test/data/valid-service-files/debug-segfault.service
-test/data/valid-service-files/debug-glib.service
test/data/valid-service-files/debug-shell-echo-success.service
test/data/valid-service-files/debug-shell-echo-fail.service
-test/data/valid-service-files/debug-python.service
])
-### FIXME it's bizarre that have_qt and have_glib are used
+### FIXME it's bizarre that have_qt
### instead of enable_ - should fix things so that enable
### is always whether it's enabled, and have is always whether
### it was found.
@@ -1502,26 +1058,6 @@
Doxygen: ${DOXYGEN}
xmlto: ${XMLTO}"
-if test x$enable_gcj = xyes ; then
-echo \
-" gcj: ${GCJ}
- gcjflags: ${GCJFLAGS}
- jar: ${JAR}"
-else
-echo \
-" gcj: (not enabled)"
-fi
-
-if test x$enable_mono = xyes ; then
-echo \
-" csc: ${CSC}
-"
-else
-echo \
-" csc: (not enabled)
-"
-fi
-
echo "
Maintainer mode: ${USE_MAINTAINER_MODE}
gcc coverage profiling: ${enable_gcov}
@@ -1529,14 +1065,8 @@
Building verbose mode: ${enable_verbose_mode}
Building assertions: ${enable_asserts}
Building checks: ${enable_checks}
- Building Qt4 bindings: ${have_qt}
- Building Qt3 bindings: ${have_qt3}
- Building GLib bindings: ${have_glib}
- Building Python bindings: ${have_python}
Building SELinux support: ${have_selinux}
Building dnotify support: ${have_dnotify}
- Building Mono bindings: ${enable_mono}
- Building Mono docs: ${enable_mono_docs}
Building GTK+ tools: ${have_gtk}
Building X11 code: ${enable_x11}
Building Doxygen docs: ${enable_doxygen_docs}
--- dbus-glib-1.pc.in DELETED ---
- Previous message: dbus/gcj .cvsignore, 1.2, NONE Makefile.am, 1.3,
NONE TestMessage.java, 1.1, NONE
- Next message: dbus/mono/example .cvsignore, 1.2, NONE BusListener.cs, 1.2,
NONE EchoClient.cs, 1.1, NONE EchoServer.cs, 1.1,
NONE Echoer.cs, 1.1, NONE Makefile.am, 1.9, NONE
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
More information about the dbus-commit
mailing list