FW: DBus-Problem

Thu Apr 11 01:16:28 PDT 2013

Hi

Unable to get on D-Bus message is coming when i run hcid -n because function call input_dbus_init() is failing.

In input_dbus_init function:connection = init_dbus("org.bluez.input", NULL, NULL);
In init_dbus("org.bluez.input", NULL, NULL); Control is going to the following code and it is generating the message :

The name org.bluez was not provided by any .service files
if (dbus_bus_request_name(conn, name, 0, &err) !=
    DBUS_REQUEST_NAME_REPLY_PRIMARY_OWNER ) {
   error("Could not become the primary owner of %s.", name);
   return NULL;
  }

For Passkey-agent, I verified the source code Passkey-agent.c,from which the error message is getting.

root@(none):~# passkey-agent default 1000
Can't register passkey agent --------------------------------------------------->this is getting because(Please see below ----)
The name org.bluez was not provided by any .service files

dbus_connection_send_with_reply_and_block(conn, msg, -1, &err);-------->This API is failing due to which the wrrir message is generated.

Code is actually checking the return value of the above API,and if it is -1 it is generating the error message.

Please tell what to do also hcid -n is failing.
Please help me.

Thanks & Regards
Sandeep

________________________________
From: Sandeep Gopisetty [mailto:sandeep.gopisetty at igate.com]
Sent: Thursday, April 11, 2013 10:58 AM
To: Krzysztof Konopko
Cc: dbus at freedesktop.org
Subject: RE: DBus-Problem

Hi Krzysztof Konopko,

For Passkey-agent, I verified the source code Passkey-agent.c,from which the error message is getting.

root@(none):~# passkey-agent default 1000
Can't register passkey agent --------------------------------------------------->this is getting because(Please see below ----)
The name org.bluez was not provided by any .service files

dbus_connection_send_with_reply_and_block(conn, msg, -1, &err);-------->This API is failing due to which the wrrir message is generated.

Code is actually checking the return value of the above API,and if it is -1 it is generating the error message.

Please tell what to do also hcid -n is failing.
Please help me.

Thanks & Regards
Sandeep

________________________________
From: dbus-bounces+sandeep.gopisetty=igate.com at lists.freedesktop.org [mailto:dbus-bounces+sandeep.gopisetty=igate.com at lists.freedesktop.org] On Behalf Of Sandeep Gopisetty
Sent: Thursday, April 11, 2013 1:42 PM
To: dbus at freedesktop.org
Subject: RE: DBus-Problem

Hi

Unable to get on D-Bus message is coming when i run hcid -n because function call input_dbus_init() is failing.

In input_dbus_init function:connection = init_dbus("org.bluez.input", NULL, NULL);
In init_dbus("org.bluez.input", NULL, NULL); Control is going to the following code and it is generating the message :

The name org.bluez was not provided by any .service files
if (dbus_bus_request_name(conn, name, 0, &err) !=
    DBUS_REQUEST_NAME_REPLY_PRIMARY_OWNER ) {
   error("Could not become the primary owner of %s.", name);
   return NULL;
  }

For Passkey-agent, I verified the source code Passkey-agent.c,from which the error message is getting.

root@(none):~# passkey-agent default 1000
Can't register passkey agent --------------------------------------------------->this is getting because(Please see below ----)
The name org.bluez was not provided by any .service files

dbus_connection_send_with_reply_and_block(conn, msg, -1, &err);-------->This API is failing due to which the wrrir message is generated.

Code is actually checking the return value of the above API,and if it is -1 it is generating the error message.

Please tell what to do also hcid -n is failing.
Please help me.

Thanks & Regards
Sandeep

________________________________
From: Sandeep Gopisetty [mailto:sandeep.gopisetty at igate.com]
Sent: Thursday, April 11, 2013 10:58 AM
To: Krzysztof Konopko
Cc: dbus at freedesktop.org
Subject: RE: DBus-Problem

Hi Krzysztof Konopko,

For Passkey-agent, I verified the source code Passkey-agent.c,from which the error message is getting.

root@(none):~# passkey-agent default 1000
Can't register passkey agent --------------------------------------------------->this is getting because(Please see below ----)
The name org.bluez was not provided by any .service files

dbus_connection_send_with_reply_and_block(conn, msg, -1, &err);-------->This API is failing due to which the wrrir message is generated.

Code is actually checking the return value of the above API,and if it is -1 it is generating the error message.

Please tell what to do also hcid -n is failing.
Please help me.

Thanks & Regards
Sandeep

________________________________
From: Krzysztof Konopko [mailto:krzysztof.konopko at gmail.com]
Sent: Wednesday, April 10, 2013 5:37 PM
To: dbus at freedesktop.org
Cc: Sandeep Gopisetty
Subject: Re: DBus-Problem

Apologize for not sending to the mailing list in the first place.

It looks like you've got all your service and policy files missing or wrong.  Check where you system.conf file points to find service and additional policy (configuration) files.

HTH,
Kris

2013/4/10 Sandeep Gopisetty <sandeep.gopisetty at igate.com<mailto:sandeep.gopisetty at igate.com>>
Hi Krzysztof Konopko

Thanks for your immediate reply
Previous issue was solved,ehen I manually added message group in /etc/group and user in /etc/shadow.
Now I am able to run dbus-daemon -system.

Now I am stuck with the following

Even the D-BUS is running hcid -n is giving the same error

hcid[1710]: Bluetooth HCI daemon
hcid[1710]: Could not become the primary owner of org.bluez.
hcid[1710]: Unable to get on D-Bus

Then I ran passkey-agent (an utility to generate the password commandline),it is also giving the error related to d-bus

root@(none):~# passkey-agent default 1000
Can't register passkey agent
The name org.bluez was not provided by any .service files

Please help me and provide me some solution.I am in very much need to do this.

Thanks & Regards
Sandeep Gopisetty
________________________________
From: Krzysztof Konopko [mailto:krzysztof.konopko at gmail.com<mailto:krzysztof.konopko at gmail.com>]
Sent: Wednesday, April 10, 2013 1:15 PM
To: Sandeep Gopisetty
Subject: Re: DBus-Problem

Hi Sandeep,

On your system, could you check the following:
id messagebus

And if there's no `id' utility on your system:
grep messagebus /etc/{passwd,group}

Kris

2013/4/10 sandeep <sandeep.gopisetty at igate.com<mailto:sandeep.gopisetty at igate.com>>
Hi,
My name is sandeep,currently i am working in adding bluetooth support in
ARM board.I inserted the drivers:rfcomm,btusb,bnep,bluetooth.
I cross compiled bluez-utils and all the other required utilitie.
when i am starting hcid it is giving unable to get on DBus
root@(none):/data/bluetooth/dbus/bin# hcid -n
hcid[605]: Bluetooth HCI daemon
hcid[605]: Unable to get on D-Bus

So i came to know that i have to launch dbus.I am using dbus-1.6.8 version
Following are the outputs of varioys commands
dbus-launch
DBUS_SESSION_BUS_ADDRESS=unix:path=/tmp/dbus-
rNfAdnokq0,guid=db0383402b883abe589c9e26000005f7
DBUS_SESSION_BUS_PID=611
root@(none):/data/bluetooth/dbus/bin# dbus-uuidgen
9a4bd04bd3d7991a146d51f3000005fd

dbus-daemon --config-file=/data/bluetooth/dbus/etc/dbus-1/system.conf

Failed to start message bus: Could not get UID and GID for
username "messagebus"

Then i created UID and GID for messagebus
 groupadd -g 101 messagebus
 useradd -u 101 messagebus

Even then also i am getting the same error
dbus-daemon --config-file=/data/bluetooth/dbus/etc/dbus-1/system.conf

Failed to start message bus: Could not get UID and GID for
username "messagebus"

Please help me what to do,i need help.Now i am in full trouble.

Please Please help me and give me suggestions as early as possible.

Thanks in advance

_______________________________________________
dbus mailing list
dbus at lists.freedesktop.org<mailto:dbus at lists.freedesktop.org>
http://lists.freedesktop.org/mailman/listinfo/dbus

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Disclaimer~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Information contained and transmitted by this e-mail is confidential and proprietary to iGATE and its affiliates and is intended for use only by the recipient. If you are not the intended recipient, you are hereby notified that any dissemination, distribution, copying or use of this e-mail is strictly prohibited and you are requested to delete this e-mail immediately and notify the originator or mailadmin at igate.com<mailto:mailadmin at igate.com>. iGATE does not enter into any agreement with any party by e-mail. Any views expressed by an individual do not necessarily reflect the view of iGATE. iGATE is not responsible for the consequences of any actions taken on the basis of information provided, through this email. The contents of an attachment to this e-mail may contain software viruses, which could damage your own computer system. While iGATE has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checks before opening an attachment. To know more about iGATE please visit www.igate.com<http://www.igate.com>.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Disclaimer~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Information contained and transmitted by this e-mail is confidential and proprietary to iGATE and its affiliates and is intended for use only by the recipient. If you are not the intended recipient, you are hereby notified that any dissemination, distribution, copying or use of this e-mail is strictly prohibited and you are requested to delete this e-mail immediately and notify the originator or mailadmin at igate.com<mailto:mailadmin at igate.com>. iGATE does not enter into any agreement with any party by e-mail. Any views expressed by an individual do not necessarily reflect the view of iGATE. iGATE is not responsible for the consequences of any actions taken on the basis of information provided, through this email. The contents of an attachment to this e-mail may contain software viruses, which could damage your own computer system. While iGATE has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checks before opening an attachment. To know more about iGATE please visit www.igate.com<http://www.igate.com>.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Disclaimer~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Information contained and transmitted by this e-mail is confidential and proprietary to iGATE and its affiliates and is intended for use only by the recipient. If you are not the intended recipient, you are hereby notified that any dissemination, distribution, copying or use of this e-mail is strictly prohibited and you are requested to delete this e-mail immediately and notify the originator or mailadmin at igate.com<mailto:mailadmin at igate.com>. iGATE does not enter into any agreement with any party by e-mail. Any views expressed by an individual do not necessarily reflect the view of iGATE. iGATE is not responsible for the consequences of any actions taken on the basis of information provided, through this email. The contents of an attachment to this e-mail may contain software viruses, which could damage your own computer system. While iGATE has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checks before opening an attachment. To know more about iGATE please visit www.igate.com<http://www.igate.com>.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Disclaimer~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Information contained and transmitted by this e-mail is confidential and proprietary to iGATE and its affiliates and is intended for use only by the recipient. If you are not the intended recipient, you are hereby notified that any dissemination, distribution, copying or use of this e-mail is strictly prohibited and you are requested to delete this e-mail immediately and notify the originator or mailadmin at igate.com <mailto:mailadmin at igate.com>. iGATE does not enter into any agreement with any party by e-mail. Any views expressed by an individual do not necessarily reflect the view of iGATE. iGATE is not responsible for the consequences of any actions taken on the basis of information provided, through this email. The contents of an attachment to this e-mail may contain software viruses, which could damage your own computer system. While iGATE has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checks before opening an attachment. To know more about iGATE please visit www.igate.com <http://www.igate.com>.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/dbus/attachments/20130411/be384046/attachment-0001.html>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: ATT00001.txt
URL: <http://lists.freedesktop.org/archives/dbus/attachments/20130411/be384046/attachment-0001.txt>