How to make devkit automount the new class or removeable devices

[Maxim Levitsky]

Hi folks,
Could you save me some of my free time, and give me an advice on how to
make devicekit and higher level libraries recognize xD picture cards,
support for which I recently have written.
When I feel confident that it works, I will release it under GPL of
course.

Currently this is what I receive from udev:


The xD device:
UDEV  [1262469549.601179] change   /devices/virtual/mtd/mtd0/smblka (block)
UDEV_LOG=3
ACTION=change
DEVPATH=/devices/virtual/mtd/mtd0/smblka
SUBSYSTEM=block
DEVNAME=/dev/smblka
DEVTYPE=disk
SEQNUM=1694
ID_FS_UUID=1970-BEB3
ID_FS_UUID_ENC=1970-BEB3
ID_FS_VERSION=FAT32
ID_FS_TYPE=vfat
ID_FS_USAGE=filesystem
DKD_MEDIA_AVAILABLE=1
DKD_PARTITION_TABLE=1
DKD_PARTITION_TABLE_SCHEME=mbr
DKD_PRESENTATION_NOPOLICY=0
MAJOR=4095
MINOR=0
DEVLINKS=/dev/block/4095:0 /dev/disk/by-uuid/1970-BEB3

------------------------------------------------------------------

The SD card, which is automounted correctly:
UDEV  [1262469429.481464] add      /devices/pci0000:00/0000:00:1e.0/0000:07:00.1/mmc_host/mmc0/mmc0:8001/block/mmcblk0 (block)
UDEV_LOG=3
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:1e.0/0000:07:00.1/mmc_host/mmc0/mmc0:8001/block/mmcblk0
SUBSYSTEM=block
DEVNAME=/dev/mmcblk0
DEVTYPE=disk
SEQNUM=1679
ID_NAME=SD01G
ID_SERIAL=0x009cc3b6
ID_PATH=pci-0000:07:00.1
ID_FS_UUID=1DBA-773C
ID_FS_UUID_ENC=1DBA-773C
ID_FS_VERSION=FAT32
ID_FS_TYPE=vfat
ID_FS_USAGE=filesystem
DKD_MEDIA_AVAILABLE=1
DKD_PARTITION_TABLE=1
DKD_PARTITION_TABLE_SCHEME=mbr
DKD_PRESENTATION_NOPOLICY=0
MAJOR=179
MINOR=0
DEVLINKS=/dev/block/179:0 /dev/disk/by-id/mmc-SD01G_0x009cc3b6 /dev/disk/by-path/pci-0000:07:00.1 /dev/disk/by-uuid/1DBA-773C


Devicekit sees the xD device as a plain disk and doesn't automount it.
(I think that nautilus does the automounting though)


Best regards,
	Maxim Levitsky