[PATCH] Make udev rules work if installed into a non-std prefix
Yury G. Kudryashov
urkud.urkud at gmail.com
Thu Jan 26 05:48:43 PST 2012
From: "Yury G. Kudryashov" <urkud.urkud at gmail.com>
Prefix all IMPORT{program} strings with @slashlibdir@ to produce absolute paths
in the output 80-udisks.rules file.
---
data/80-udisks.rules | 214 -----------------------------------------------
data/80-udisks.rules.in | 214 +++++++++++++++++++++++++++++++++++++++++++++++
data/Makefile.am | 6 +-
3 files changed, 219 insertions(+), 215 deletions(-)
delete mode 100644 data/80-udisks.rules
create mode 100644 data/80-udisks.rules.in
diff --git a/data/80-udisks.rules b/data/80-udisks.rules
deleted file mode 100644
index 6720394..0000000
--- a/data/80-udisks.rules
+++ /dev/null
@@ -1,214 +0,0 @@
-# Do not edit this file, it will be overwritten on updates
-#
-
-# import names for PCI storage controllers
-#
-SUBSYSTEM=="pci", ACTION=="add|change", ENV{ID_MODEL_FROM_DATABASE}=="", ATTR{class}=="0x01*", IMPORT{program}="pci-db %p"
-
-# Set eSATA port type for known eSATA CardBus adapters - first we want to ensure
-# the device is on a cardbus controller (upper PCI device) - then we check
-# vid/pid (lower PCI device)
-#
-SUBSYSTEM=="scsi_host", ATTRS{class}=="0x060700", GOTO="ata_port_cardbus"
-GOTO="ata_port_cardbus_end"
-LABEL="ata_port_cardbus"
-# Mass storage controller: Silicon Image, Inc. SiI 3512 [SATALink/SATARaid] Serial ATA Controller (rev 01)
-#
-SUBSYSTEMS=="pci", ATTRS{vendor}=="0x1095", ATTRS{device}=="0x3512", ENV{UDISKS_ATA_PORT_CONNECTOR_TYPE}="ata_sata_external"
-LABEL="ata_port_cardbus_end"
-
-# probe SAS expanders
-#
-# (hmm, this might be racy, we might not have the BSG device just yet - if
-# this is the case we can trigger a 'change' on the sas_expander device
-# when the bsg device appears)
-#
-SUBSYSTEM=="sas_expander", ACTION=="add|change", IMPORT{program}="udisks-probe-sas-expander /sys/%p"
-
-##############################################################################################################
-
-# from here on, we only care about block devices
-ACTION!="add|change", GOTO="udisks_end"
-SUBSYSTEM!="block", GOTO="udisks_end"
-KERNEL=="ram*", GOTO="udisks_end"
-
-# Mark devices that shouldn't be automounted / autoassembled etc.
-#
-# Deny all, then punch holes for what looks like physical drives
-# (TODO: this heuristic might need some work)
-#
-
-ENV{UDISKS_PRESENTATION_NOPOLICY}="1"
-KERNEL=="sd*|hd*|sr*|mmcblk*|mspblk*", ENV{UDISKS_PRESENTATION_NOPOLICY}="0"
-
-##############################################################################################################
-
-# we only care about change events on device-mapper
-# devices - never touch the device on add events
-KERNEL=="dm-*", ACTION!="change", GOTO="udisks_end"
-
-# honor the flag that device-mapper sets if the device should be ignored
-ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", GOTO="udisks_end"
-ENV{DM_UDEV_DISABLE_DISK_RULES_FLAG}=="1", GOTO="udisks_end"
-
-# import UDISKS_DM_* and UDISKS_LVM2_* properties - the long-term plan is to make the lvm2 and
-# device-mapper packages provide this information
-#
-KERNEL=="dm-*", IMPORT{program}="udisks-dm-export %M %m"
-
-# Make udevd synthesize a 'change' uevent when last opener of a rw-fd closes the fd - this
-# should be part of the device-mapper rules
-KERNEL=="dm-*", OPTIONS+="watch"
-
-##############################################################################################################
-# Probe LVM2 Physical Volumes - this will eventually be part of the LVM2 package
-
-ENV{ID_FS_TYPE}=="LVM2_member", TEST=="/lib/udev/udisks-lvm-pv-export", IMPORT{program}="udisks-lvm-pv-export $env{ID_FS_UUID}"
-
-##############################################################################################################
-
-# Probe for partition tables; this really should be part of udev / util-linux-ng
-#
-
-# skip rules for inappropriate block devices
-KERNEL=="fd*|mtd*|nbd*|gnbd*|btibm*", GOTO="probe_parttable_end"
-
-# never access non-cdrom removable ide devices, the drivers are causing event loops on open()
-KERNEL=="hd*[!0-9]", ATTR{removable}=="1", SUBSYSTEMS=="ide", ATTRS{media}=="disk|floppy", GOTO="probe_parttable_end"
-KERNEL=="hd*[0-9]", ATTR{removable}=="1", GOTO="probe_parttable_end"
-
-# don't scan for partition tables on empty discs
-KERNEL=="sr*", ENV{ID_CDROM_MEDIA}!="?*", GOTO="probe_parttable_end"
-
-# skip non-data discs (see https://bugzilla.kernel.org/show_bug.cgi?id=15757 for the udev bits)
-KERNEL=="sr*", ENV{ID_CDROM_MEDIA_TRACK_COUNT_DATA}=="", GOTO="probe_parttable_end"
-
-# scan for partition tables both on whole-disk and partitions
-#
-IMPORT{program}="udisks-part-id $tempnode"
-
-LABEL="probe_parttable_end"
-
-##############################################################################################################
-
-# pick up data from MD components; this REALLY should be done by rules installed
-# by mdadm or the kernel package
-#
-ENV{ID_FS_TYPE}!="linux_raid_member", GOTO="md_end"
-
-# avoid probing if it has already been done earlier
-#
-ENV{MD_LEVEL}!="", GOTO="md_end"
-IMPORT{program}="/sbin/mdadm --examine --export $tempnode"
-
-LABEL="md_end"
-
-##############################################################################################################
-
-# Check if a disk is ATA SMART capable
-#
-
-# USB ATA enclosures with a SAT layer
-KERNEL=="sd*[!0-9]", ATTR{removable}=="0", ENV{ID_BUS}=="usb", ENV{DEVTYPE}=="disk", IMPORT{program}="udisks-probe-ata-smart $tempnode"
-
-# ATA disks driven by libata
-KERNEL=="sd*[!0-9]", ATTR{removable}=="0", ENV{ID_BUS}=="ata", ENV{DEVTYPE}=="disk", IMPORT{program}="udisks-probe-ata-smart $tempnode"
-
-# ATA disks connected via SAS (not driven by libata)
-KERNEL=="sd*[!0-9]", ATTR{removable}=="0", ENV{ID_BUS}=="scsi", ENV{DEVTYPE}=="disk", ENV{ID_VENDOR}=="ATA", IMPORT{program}="udisks-probe-ata-smart $tempnode"
-
-
-# Example rule for tagging a device with a specific media type. Where and
-# how to store this database needs some thought.
-#
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="050d", ATTRS{idProduct}=="0248", ENV{ID_INSTANCE}=="0:0", ENV{ID_DRIVE_FLASH_CF}="1"
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="050d", ATTRS{idProduct}=="0248", ENV{ID_INSTANCE}=="0:1", ENV{ID_DRIVE_FLASH_MS}="1"
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="050d", ATTRS{idProduct}=="0248", ENV{ID_INSTANCE}=="0:2", ENV{ID_DRIVE_FLASH_SM}="1"
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="050d", ATTRS{idProduct}=="0248", ENV{ID_INSTANCE}=="0:3", ENV{ID_DRIVE_FLASH_SD}="1"
-
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="05e3", ATTRS{idProduct}=="070e", ENV{ID_INSTANCE}=="0:0", ENV{ID_DRIVE_FLASH_CF}="1"
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="05e3", ATTRS{idProduct}=="070e", ENV{ID_INSTANCE}=="0:1", ENV{ID_DRIVE_FLASH_SM}="1"
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="05e3", ATTRS{idProduct}=="070e", ENV{ID_INSTANCE}=="0:2", ENV{ID_DRIVE_FLASH_SD}="1"
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="05e3", ATTRS{idProduct}=="070e", ENV{ID_INSTANCE}=="0:3", ENV{ID_DRIVE_FLASH_MS}="1"
-
-# APPLE SD Card Reader (MacbookPro5,4)
-#
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="05ac", ATTRS{idProduct}=="8403", ENV{ID_DRIVE_FLASH_SD}="1"
-
-# Realtek card readers
-DRIVERS=="rts_pstor", ENV{ID_DRIVE_FLASH_SD}="1"
-
-# Common theme
-#
-SUBSYSTEMS=="usb", ENV{ID_MODEL}=="*SD_Reader*", ENV{ID_DRIVE_FLASH_SD}="1"
-SUBSYSTEMS=="usb", ENV{ID_MODEL}=="*Reader*SD*", ENV{ID_DRIVE_FLASH_SD}="1"
-SUBSYSTEMS=="usb", ENV{ID_MODEL}=="*CF_Reader*", ENV{ID_DRIVE_FLASH_CF}="1"
-SUBSYSTEMS=="usb", ENV{ID_MODEL}=="*SM_Reader*", ENV{ID_DRIVE_FLASH_SM}="1"
-SUBSYSTEMS=="usb", ENV{ID_MODEL}=="*MS_Reader*", ENV{ID_DRIVE_FLASH_MS}="1"
-
-##############################################################################################################
-
-# If previous rules did not set an icon, provide a default one for media players
-
-ENV{UDISKS_PRESENTATION_ICON_NAME}=="?*", GOTO="udisks_media_player_end"
-
-ENV{ID_MEDIA_PLAYER}=="?*", ENV{UDISKS_PRESENTATION_ICON_NAME}="multimedia-player"
-ENV{ID_MEDIA_PLAYER}=="apple-ipod", ENV{UDISKS_PRESENTATION_ICON_NAME}="multimedia-player-ipod"
-
-# Apple iPod Video
-#
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="05ac", ATTRS{idProduct}=="1209", ENV{UDISKS_PRESENTATION_ICON_NAME}="multimedia-player-ipod-white"
-
-LABEL="udisks_media_player_end"
-
-##############################################################################################################
-
-# PC floppy drives
-#
-KERNEL=="fd*", ENV{ID_DRIVE_FLOPPY}="1"
-
-# USB floppy drives
-#
-SUBSYSTEMS=="usb", ATTRS{bInterfaceClass}=="08", ATTRS{bInterfaceSubClass}=="04", ENV{ID_DRIVE_FLOPPY}="1"
-
-# ATA Zip drives
-#
-ENV{ID_VENDOR}=="*IOMEGA*", ENV{ID_MODEL}=="*ZIP*", ENV{ID_DRIVE_FLOPPY_ZIP}="1"
-
-##############################################################################################################
-
-# Partitions which desktops should not display
-#
-
-# Apple Bootstrap partitions
-ENV{UDISKS_PARTITION_SCHEME}=="apm", ENV{UDISKS_PARTITION_TYPE}=="Apple_Bootstrap", ENV{UDISKS_PRESENTATION_HIDE}="1"
-
-# special MBR partition types (EFI, hidden, etc.)
-# see http://www.win.tue.nl/~aeb/partitions/partition_types-1.html
-ENV{UDISKS_PARTITION_SCHEME}=="mbr", \
- ENV{UDISKS_PARTITION_TYPE}=="0x00|0x11|0x12|0x14|0x16|0x17|0x1b|0x1c|0x1e|0x27|0x3d|0x84|0x8d|0x90|0x91|0x92|0x93|0x97|0x98|0x9a|0x9b|0xbb|0xc2|0xc3|0xdd|0xef", \
- ENV{UDISKS_PRESENTATION_HIDE}="1"
-
-# special GUID-identified partition types
-# see http://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUIDs
-ENV{UDISKS_PARTITION_SCHEME}=="gpt", \
- ENV{UDISKS_PARTITION_TYPE}=="C12A7328-F81F-11D2-BA4B-00A0C93EC93B|21686148-6449-6E6F-744E-656564454649", \
- ENV{UDISKS_PRESENTATION_HIDE}="1"
-
-# APM recovery/tool partitions which are useless on Linux
-ENV{UDISKS_PARTITION_SCHEME}=="apm", \
- ENV{ID_CDROM}=="?*", ENV{ID_FS_TYPE}=="udf", ENV{ID_FS_LABEL}=="WD_SmartWare", \
- ENV{UDISKS_PRESENTATION_HIDE}="1"
-
-# recovery partitions (taken from old hal rules)
-ENV{ID_FS_TYPE}=="ntfs|vfat", \
- ENV{ID_FS_LABEL}=="RECOVERY|HP_RECOVERY|Recovery Partition|DellUtility|DellRestore|IBM_SERVICE|SERVICEV001|SERVICEV002|SYSTEM RESERVED", \
- ENV{UDISKS_PRESENTATION_HIDE}="1"
-
-# read-only non-Linux software installer partitions
-ENV{ID_VENDOR}=="Sony", ENV{ID_MODEL}=="PRS*Launcher", ENV{UDISKS_PRESENTATION_HIDE}="1"
-
-##############################################################################################################
-
-
-LABEL="udisks_end"
diff --git a/data/80-udisks.rules.in b/data/80-udisks.rules.in
new file mode 100644
index 0000000..60b67ed
--- /dev/null
+++ b/data/80-udisks.rules.in
@@ -0,0 +1,214 @@
+# Do not edit this file, it will be overwritten on updates
+#
+
+# import names for PCI storage controllers
+#
+SUBSYSTEM=="pci", ACTION=="add|change", ENV{ID_MODEL_FROM_DATABASE}=="", ATTR{class}=="0x01*", IMPORT{program}="pci-db %p"
+
+# Set eSATA port type for known eSATA CardBus adapters - first we want to ensure
+# the device is on a cardbus controller (upper PCI device) - then we check
+# vid/pid (lower PCI device)
+#
+SUBSYSTEM=="scsi_host", ATTRS{class}=="0x060700", GOTO="ata_port_cardbus"
+GOTO="ata_port_cardbus_end"
+LABEL="ata_port_cardbus"
+# Mass storage controller: Silicon Image, Inc. SiI 3512 [SATALink/SATARaid] Serial ATA Controller (rev 01)
+#
+SUBSYSTEMS=="pci", ATTRS{vendor}=="0x1095", ATTRS{device}=="0x3512", ENV{UDISKS_ATA_PORT_CONNECTOR_TYPE}="ata_sata_external"
+LABEL="ata_port_cardbus_end"
+
+# probe SAS expanders
+#
+# (hmm, this might be racy, we might not have the BSG device just yet - if
+# this is the case we can trigger a 'change' on the sas_expander device
+# when the bsg device appears)
+#
+SUBSYSTEM=="sas_expander", ACTION=="add|change", IMPORT{program}="@slashlibdir@/udev/udisks-probe-sas-expander /sys/%p"
+
+##############################################################################################################
+
+# from here on, we only care about block devices
+ACTION!="add|change", GOTO="udisks_end"
+SUBSYSTEM!="block", GOTO="udisks_end"
+KERNEL=="ram*", GOTO="udisks_end"
+
+# Mark devices that shouldn't be automounted / autoassembled etc.
+#
+# Deny all, then punch holes for what looks like physical drives
+# (TODO: this heuristic might need some work)
+#
+
+ENV{UDISKS_PRESENTATION_NOPOLICY}="1"
+KERNEL=="sd*|hd*|sr*|mmcblk*|mspblk*", ENV{UDISKS_PRESENTATION_NOPOLICY}="0"
+
+##############################################################################################################
+
+# we only care about change events on device-mapper
+# devices - never touch the device on add events
+KERNEL=="dm-*", ACTION!="change", GOTO="udisks_end"
+
+# honor the flag that device-mapper sets if the device should be ignored
+ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", GOTO="udisks_end"
+ENV{DM_UDEV_DISABLE_DISK_RULES_FLAG}=="1", GOTO="udisks_end"
+
+# import UDISKS_DM_* and UDISKS_LVM2_* properties - the long-term plan is to make the lvm2 and
+# device-mapper packages provide this information
+#
+KERNEL=="dm-*", IMPORT{program}="@slashlibdir@/udev/udisks-dm-export %M %m"
+
+# Make udevd synthesize a 'change' uevent when last opener of a rw-fd closes the fd - this
+# should be part of the device-mapper rules
+KERNEL=="dm-*", OPTIONS+="watch"
+
+##############################################################################################################
+# Probe LVM2 Physical Volumes - this will eventually be part of the LVM2 package
+
+ENV{ID_FS_TYPE}=="LVM2_member", TEST=="@slashlibdir@/udev/udisks-lvm-pv-export", IMPORT{program}="@slashlibdir@/udev/udisks-lvm-pv-export $env{ID_FS_UUID}"
+
+##############################################################################################################
+
+# Probe for partition tables; this really should be part of udev / util-linux-ng
+#
+
+# skip rules for inappropriate block devices
+KERNEL=="fd*|mtd*|nbd*|gnbd*|btibm*", GOTO="probe_parttable_end"
+
+# never access non-cdrom removable ide devices, the drivers are causing event loops on open()
+KERNEL=="hd*[!0-9]", ATTR{removable}=="1", SUBSYSTEMS=="ide", ATTRS{media}=="disk|floppy", GOTO="probe_parttable_end"
+KERNEL=="hd*[0-9]", ATTR{removable}=="1", GOTO="probe_parttable_end"
+
+# don't scan for partition tables on empty discs
+KERNEL=="sr*", ENV{ID_CDROM_MEDIA}!="?*", GOTO="probe_parttable_end"
+
+# skip non-data discs (see https://bugzilla.kernel.org/show_bug.cgi?id=15757 for the udev bits)
+KERNEL=="sr*", ENV{ID_CDROM_MEDIA_TRACK_COUNT_DATA}=="", GOTO="probe_parttable_end"
+
+# scan for partition tables both on whole-disk and partitions
+#
+IMPORT{program}="@slashlibdir@/udev/udisks-part-id $tempnode"
+
+LABEL="probe_parttable_end"
+
+##############################################################################################################
+
+# pick up data from MD components; this REALLY should be done by rules installed
+# by mdadm or the kernel package
+#
+ENV{ID_FS_TYPE}!="linux_raid_member", GOTO="md_end"
+
+# avoid probing if it has already been done earlier
+#
+ENV{MD_LEVEL}!="", GOTO="md_end"
+IMPORT{program}="/sbin/mdadm --examine --export $tempnode"
+
+LABEL="md_end"
+
+##############################################################################################################
+
+# Check if a disk is ATA SMART capable
+#
+
+# USB ATA enclosures with a SAT layer
+KERNEL=="sd*[!0-9]", ATTR{removable}=="0", ENV{ID_BUS}=="usb", ENV{DEVTYPE}=="disk", IMPORT{program}="@slashlibdir@/udev/udisks-probe-ata-smart $tempnode"
+
+# ATA disks driven by libata
+KERNEL=="sd*[!0-9]", ATTR{removable}=="0", ENV{ID_BUS}=="ata", ENV{DEVTYPE}=="disk", IMPORT{program}="@slashlibdir@/udev/udisks-probe-ata-smart $tempnode"
+
+# ATA disks connected via SAS (not driven by libata)
+KERNEL=="sd*[!0-9]", ATTR{removable}=="0", ENV{ID_BUS}=="scsi", ENV{DEVTYPE}=="disk", ENV{ID_VENDOR}=="ATA", IMPORT{program}="@slashlibdir@/udev/udisks-probe-ata-smart $tempnode"
+
+
+# Example rule for tagging a device with a specific media type. Where and
+# how to store this database needs some thought.
+#
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="050d", ATTRS{idProduct}=="0248", ENV{ID_INSTANCE}=="0:0", ENV{ID_DRIVE_FLASH_CF}="1"
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="050d", ATTRS{idProduct}=="0248", ENV{ID_INSTANCE}=="0:1", ENV{ID_DRIVE_FLASH_MS}="1"
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="050d", ATTRS{idProduct}=="0248", ENV{ID_INSTANCE}=="0:2", ENV{ID_DRIVE_FLASH_SM}="1"
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="050d", ATTRS{idProduct}=="0248", ENV{ID_INSTANCE}=="0:3", ENV{ID_DRIVE_FLASH_SD}="1"
+
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="05e3", ATTRS{idProduct}=="070e", ENV{ID_INSTANCE}=="0:0", ENV{ID_DRIVE_FLASH_CF}="1"
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="05e3", ATTRS{idProduct}=="070e", ENV{ID_INSTANCE}=="0:1", ENV{ID_DRIVE_FLASH_SM}="1"
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="05e3", ATTRS{idProduct}=="070e", ENV{ID_INSTANCE}=="0:2", ENV{ID_DRIVE_FLASH_SD}="1"
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="05e3", ATTRS{idProduct}=="070e", ENV{ID_INSTANCE}=="0:3", ENV{ID_DRIVE_FLASH_MS}="1"
+
+# APPLE SD Card Reader (MacbookPro5,4)
+#
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="05ac", ATTRS{idProduct}=="8403", ENV{ID_DRIVE_FLASH_SD}="1"
+
+# Realtek card readers
+DRIVERS=="rts_pstor", ENV{ID_DRIVE_FLASH_SD}="1"
+
+# Common theme
+#
+SUBSYSTEMS=="usb", ENV{ID_MODEL}=="*SD_Reader*", ENV{ID_DRIVE_FLASH_SD}="1"
+SUBSYSTEMS=="usb", ENV{ID_MODEL}=="*Reader*SD*", ENV{ID_DRIVE_FLASH_SD}="1"
+SUBSYSTEMS=="usb", ENV{ID_MODEL}=="*CF_Reader*", ENV{ID_DRIVE_FLASH_CF}="1"
+SUBSYSTEMS=="usb", ENV{ID_MODEL}=="*SM_Reader*", ENV{ID_DRIVE_FLASH_SM}="1"
+SUBSYSTEMS=="usb", ENV{ID_MODEL}=="*MS_Reader*", ENV{ID_DRIVE_FLASH_MS}="1"
+
+##############################################################################################################
+
+# If previous rules did not set an icon, provide a default one for media players
+
+ENV{UDISKS_PRESENTATION_ICON_NAME}=="?*", GOTO="udisks_media_player_end"
+
+ENV{ID_MEDIA_PLAYER}=="?*", ENV{UDISKS_PRESENTATION_ICON_NAME}="multimedia-player"
+ENV{ID_MEDIA_PLAYER}=="apple-ipod", ENV{UDISKS_PRESENTATION_ICON_NAME}="multimedia-player-ipod"
+
+# Apple iPod Video
+#
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="05ac", ATTRS{idProduct}=="1209", ENV{UDISKS_PRESENTATION_ICON_NAME}="multimedia-player-ipod-white"
+
+LABEL="udisks_media_player_end"
+
+##############################################################################################################
+
+# PC floppy drives
+#
+KERNEL=="fd*", ENV{ID_DRIVE_FLOPPY}="1"
+
+# USB floppy drives
+#
+SUBSYSTEMS=="usb", ATTRS{bInterfaceClass}=="08", ATTRS{bInterfaceSubClass}=="04", ENV{ID_DRIVE_FLOPPY}="1"
+
+# ATA Zip drives
+#
+ENV{ID_VENDOR}=="*IOMEGA*", ENV{ID_MODEL}=="*ZIP*", ENV{ID_DRIVE_FLOPPY_ZIP}="1"
+
+##############################################################################################################
+
+# Partitions which desktops should not display
+#
+
+# Apple Bootstrap partitions
+ENV{UDISKS_PARTITION_SCHEME}=="apm", ENV{UDISKS_PARTITION_TYPE}=="Apple_Bootstrap", ENV{UDISKS_PRESENTATION_HIDE}="1"
+
+# special MBR partition types (EFI, hidden, etc.)
+# see http://www.win.tue.nl/~aeb/partitions/partition_types-1.html
+ENV{UDISKS_PARTITION_SCHEME}=="mbr", \
+ ENV{UDISKS_PARTITION_TYPE}=="0x00|0x11|0x12|0x14|0x16|0x17|0x1b|0x1c|0x1e|0x27|0x3d|0x84|0x8d|0x90|0x91|0x92|0x93|0x97|0x98|0x9a|0x9b|0xbb|0xc2|0xc3|0xdd|0xef", \
+ ENV{UDISKS_PRESENTATION_HIDE}="1"
+
+# special GUID-identified partition types
+# see http://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUIDs
+ENV{UDISKS_PARTITION_SCHEME}=="gpt", \
+ ENV{UDISKS_PARTITION_TYPE}=="C12A7328-F81F-11D2-BA4B-00A0C93EC93B|21686148-6449-6E6F-744E-656564454649", \
+ ENV{UDISKS_PRESENTATION_HIDE}="1"
+
+# APM recovery/tool partitions which are useless on Linux
+ENV{UDISKS_PARTITION_SCHEME}=="apm", \
+ ENV{ID_CDROM}=="?*", ENV{ID_FS_TYPE}=="udf", ENV{ID_FS_LABEL}=="WD_SmartWare", \
+ ENV{UDISKS_PRESENTATION_HIDE}="1"
+
+# recovery partitions (taken from old hal rules)
+ENV{ID_FS_TYPE}=="ntfs|vfat", \
+ ENV{ID_FS_LABEL}=="RECOVERY|HP_RECOVERY|Recovery Partition|DellUtility|DellRestore|IBM_SERVICE|SERVICEV001|SERVICEV002|SYSTEM RESERVED", \
+ ENV{UDISKS_PRESENTATION_HIDE}="1"
+
+# read-only non-Linux software installer partitions
+ENV{ID_VENDOR}=="Sony", ENV{ID_MODEL}=="PRS*Launcher", ENV{UDISKS_PRESENTATION_HIDE}="1"
+
+##############################################################################################################
+
+
+LABEL="udisks_end"
diff --git a/data/Makefile.am b/data/Makefile.am
index ca6d8ac..ed9faa3 100644
--- a/data/Makefile.am
+++ b/data/Makefile.am
@@ -25,7 +25,11 @@ $(dbusconf_DATA): $(dbusconf_in_files) Makefile
cp $< $@
udevrulesdir = $(slashlibdir)/udev/rules.d
-udevrules_DATA = 80-udisks.rules
+udevrules_in_files = 80-udisks.rules.in
+udevrules_DATA = $(udevrules_in_files:.rules.in=.rules)
+
+$(udevrules_DATA): $(udevrules_in_files) Makefile
+ @sed -e "s|\@slashlibdir\@|$(slashlibdir)|g" $< > $@
pkgconfigdir = $(datadir)/pkgconfig
pkgconfig_DATA = udisks.pc
--
1.7.8
More information about the devkit-devel
mailing list