[Bug 28671] Seg. fault and Oops with Radeon KMS (v2.6.34) on PPC ATI Radeon AGP r420 JH.

[bugzilla-daemon at freedesktop.org]

https://bugs.freedesktop.org/show_bug.cgi?id=28671

--- Comment #15 from Brett Witherspoon <brett.witherspoon at comcast.net> 2010-06-26 13:03:58 PDT ---
Created an attachment (id=36526)
 --> (https://bugs.freedesktop.org/attachment.cgi?id=36526)
dmesg: first connector table patch

Ok, gave this table a try. I had to fuzz a few lines to get the patch to apply
to the 2.6.34 sources. I assume you must be working with some git branch. If it
would be best that I use the same source your working with let me know.

Attached is the dmesg. I noticed the connector_id is the same for both entries.
Are we testing with just one connector? The drivers reports that there is
nothing connected to the connector. I do not know how the Connector [0-1] are
enumerated, but I was unable to connect a monitor to the ADT port as I don't
have an adaptor yet. I ordered one though, so it should be here be the end of
this next week. 

I do not know of anyway to determine which physical connector this would be and
I assume if the dac,tmds or ddc lines or incorrect it might not be detected. Is
this the case?

Also if it is any use; the connectors appear to be DVI-D (Analog and Digital,
Dual link) and of course the ADT one has some additional pins.

-- 
Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.