[PATCH] drm/radeon/kms/pm: use low clock mode in low profile mode on desktop r6xx+ cards
Alex Deucher
alexdeucher at gmail.com
Mon May 17 14:15:26 PDT 2010
ARGH! Bad patch. Ignore this one. Thanks to Andy for pointing out
the index errors. Still in vacation mode. Working patch on the way.
Alex
On Mon, May 17, 2010 at 1:12 PM, Alex Deucher <alexdeucher at gmail.com> wrote:
> On desktop cards there are no battery modes, so the low and high power states
> are the same. For the low profile case, choose the lower clock mode.
>
> Signed-off-by: Alex Deucher <alexdeucher at gmail.com>
> ---
> drivers/gpu/drm/radeon/r600.c | 8 ++++----
> 1 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
> index 7ca57b9..1e81f3c 100644
> --- a/drivers/gpu/drm/radeon/r600.c
> +++ b/drivers/gpu/drm/radeon/r600.c
> @@ -401,7 +401,7 @@ void r600_pm_init_profile(struct radeon_device *rdev)
> rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = 1;
> rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = 1;
> rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_cm_idx = 0;
> - rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_cm_idx = 2;
> + rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_cm_idx = 1;
> /* high sh */
> rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx = 1;
> rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx = 1;
> @@ -411,7 +411,7 @@ void r600_pm_init_profile(struct radeon_device *rdev)
> rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = 2;
> rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = 2;
> rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_cm_idx = 0;
> - rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_cm_idx = 2;
> + rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_cm_idx = 1;
> /* high mh */
> rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx = 2;
> rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx = 2;
> @@ -437,7 +437,7 @@ void r600_pm_init_profile(struct radeon_device *rdev)
> rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_ps_idx =
> r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 0);
> rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_cm_idx = 0;
> - rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_cm_idx = 2;
> + rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_on_cm_idx = 1;
> }
> /* high sh */
> rdev->pm.profiles[PM_PROFILE_HIGH_SH_IDX].dpms_off_ps_idx =
> @@ -460,7 +460,7 @@ void r600_pm_init_profile(struct radeon_device *rdev)
> rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_ps_idx =
> r600_pm_get_type_index(rdev, POWER_STATE_TYPE_PERFORMANCE, 1);
> rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_cm_idx = 0;
> - rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_cm_idx = 2;
> + rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_on_cm_idx = 1;
> }
> /* high mh */
> rdev->pm.profiles[PM_PROFILE_HIGH_MH_IDX].dpms_off_ps_idx =
> --
> 1.5.6.3
>
>
More information about the dri-devel
mailing list