[PATCH 03/20] drm/radeon/kms: upstream atombios.h updates
Alex Deucher
alexdeucher at gmail.com
Mon Nov 22 14:56:20 PST 2010
Signed-off-by: Alex Deucher <alexdeucher at gmail.com>
---
drivers/gpu/drm/radeon/atombios.h | 853 ++++++++++++++++++++++++++++++++++---
1 files changed, 792 insertions(+), 61 deletions(-)
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index fe359a2..6a9baa2 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -73,8 +73,18 @@
#define ATOM_PPLL1 0
#define ATOM_PPLL2 1
#define ATOM_DCPLL 2
+#define ATOM_PPLL0 2
+#define ATOM_EXT_PLL1 8
+#define ATOM_EXT_PLL2 9
+#define ATOM_EXT_CLOCK 10
#define ATOM_PPLL_INVALID 0xFF
+#define ENCODER_REFCLK_SRC_P1PLL 0
+#define ENCODER_REFCLK_SRC_P2PLL 1
+#define ENCODER_REFCLK_SRC_DCPLL 2
+#define ENCODER_REFCLK_SRC_EXTCLK 3
+#define ENCODER_REFCLK_SRC_INVALID 0xFF
+
#define ATOM_SCALER1 0
#define ATOM_SCALER2 1
@@ -192,6 +202,9 @@ typedef struct _ATOM_COMMON_TABLE_HEADER
/*Image can't be updated, while Driver needs to carry the new table! */
}ATOM_COMMON_TABLE_HEADER;
+/****************************************************************************/
+// Structure stores the ROM header.
+/****************************************************************************/
typedef struct _ATOM_ROM_HEADER
{
ATOM_COMMON_TABLE_HEADER sHeader;
@@ -221,6 +234,9 @@ typedef struct _ATOM_ROM_HEADER
#define USHORT void*
#endif
+/****************************************************************************/
+// Structures used in Command.mtb
+/****************************************************************************/
typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{
USHORT ASIC_Init; //Function Table, used by various SW components,latest version 1.1
USHORT GetDisplaySurfaceSize; //Atomic Table, Used by Bios when enabling HW ICON
@@ -312,6 +328,7 @@ typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{
#define SetUniphyInstance ASIC_StaticPwrMgtStatusChange
#define HPDInterruptService ReadHWAssistedI2CStatus
#define EnableVGA_Access GetSCLKOverMCLKRatio
+#define GetDispObjectInfo EnableYUV
typedef struct _ATOM_MASTER_COMMAND_TABLE
{
@@ -357,6 +374,24 @@ typedef struct _ATOM_COMMON_ROM_COMMAND_TABLE_HEADER
/****************************************************************************/
#define COMPUTE_MEMORY_PLL_PARAM 1
#define COMPUTE_ENGINE_PLL_PARAM 2
+#define ADJUST_MC_SETTING_PARAM 3
+
+/****************************************************************************/
+// Structures used by AdjustMemoryControllerTable
+/****************************************************************************/
+typedef struct _ATOM_ADJUST_MEMORY_CLOCK_FREQ
+{
+#if ATOM_BIG_ENDIAN
+ ULONG ulPointerReturnFlag:1; // BYTE_3[7]=1 - Return the pointer to the right Data Block; BYTE_3[7]=0 - Program the right Data Block
+ ULONG ulMemoryModuleNumber:7; // BYTE_3[6:0]
+ ULONG ulClockFreq:24;
+#else
+ ULONG ulClockFreq:24;
+ ULONG ulMemoryModuleNumber:7; // BYTE_3[6:0]
+ ULONG ulPointerReturnFlag:1; // BYTE_3[7]=1 - Return the pointer to the right Data Block; BYTE_3[7]=0 - Program the right Data Block
+#endif
+}ATOM_ADJUST_MEMORY_CLOCK_FREQ;
+#define POINTER_RETURN_FLAG 0x80
typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS
{
@@ -440,6 +475,26 @@ typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V4
#endif
}COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V4;
+typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V5
+{
+ union
+ {
+ ATOM_COMPUTE_CLOCK_FREQ ulClock; //Input Parameter
+ ATOM_S_MPLL_FB_DIVIDER ulFbDiv; //Output Parameter
+ };
+ UCHAR ucRefDiv; //Output Parameter
+ UCHAR ucPostDiv; //Output Parameter
+ union
+ {
+ UCHAR ucCntlFlag; //Output Flags
+ UCHAR ucInputFlag; //Input Flags. ucInputFlag[0] - Strobe(1)/Performance(0) mode
+ };
+ UCHAR ucReserved;
+}COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V5;
+
+// ucInputFlag
+#define ATOM_PLL_INPUT_FLAG_PLL_STROBE_MODE_EN 1 // 1-StrobeMode, 0-PerformanceMode
+
typedef struct _DYNAMICE_MEMORY_SETTINGS_PARAMETER
{
ATOM_COMPUTE_CLOCK_FREQ ulClock;
@@ -583,6 +638,7 @@ typedef struct _DIG_ENCODER_CONTROL_PARAMETERS
#define ATOM_ENCODER_CONFIG_DPLINKRATE_MASK 0x01
#define ATOM_ENCODER_CONFIG_DPLINKRATE_1_62GHZ 0x00
#define ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ 0x01
+#define ATOM_ENCODER_CONFIG_DPLINKRATE_5_40GHZ 0x02
#define ATOM_ENCODER_CONFIG_LINK_SEL_MASK 0x04
#define ATOM_ENCODER_CONFIG_LINKA 0x00
#define ATOM_ENCODER_CONFIG_LINKB 0x04
@@ -608,6 +664,9 @@ typedef struct _DIG_ENCODER_CONTROL_PARAMETERS
#define ATOM_ENCODER_MODE_TV 13
#define ATOM_ENCODER_MODE_CV 14
#define ATOM_ENCODER_MODE_CRT 15
+#define ATOM_ENCODER_MODE_DVO 16
+#define ATOM_ENCODER_MODE_DP_SST ATOM_ENCODER_MODE_DP // For DP1.2
+#define ATOM_ENCODER_MODE_DP_MST 5 // For DP1.2
typedef struct _ATOM_DIG_ENCODER_CONFIG_V2
{
@@ -661,6 +720,7 @@ typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V2
#define ATOM_ENCODER_CMD_DP_LINK_TRAINING_START 0x08
#define ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN1 0x09
#define ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN2 0x0a
+#define ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN3 0x13
#define ATOM_ENCODER_CMD_DP_LINK_TRAINING_COMPLETE 0x0b
#define ATOM_ENCODER_CMD_DP_VIDEO_OFF 0x0c
#define ATOM_ENCODER_CMD_DP_VIDEO_ON 0x0d
@@ -671,24 +731,34 @@ typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V2
#define ATOM_ENCODER_STATUS_LINK_TRAINING_COMPLETE 0x10
#define ATOM_ENCODER_STATUS_LINK_TRAINING_INCOMPLETE 0x00
+//ucTableFormatRevision=1
+//ucTableContentRevision=3
// Following function ENABLE sub-function will be used by driver when TMDS/HDMI/LVDS is used, disable function will be used by driver
typedef struct _ATOM_DIG_ENCODER_CONFIG_V3
{
#if ATOM_BIG_ENDIAN
UCHAR ucReserved1:1;
- UCHAR ucDigSel:3; // =0: DIGA/B/C/D/E/F
+ UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also refered as DIGA/B/C/D/E/F)
UCHAR ucReserved:3;
UCHAR ucDPLinkRate:1; // =0: 1.62Ghz, =1: 2.7Ghz
#else
UCHAR ucDPLinkRate:1; // =0: 1.62Ghz, =1: 2.7Ghz
UCHAR ucReserved:3;
- UCHAR ucDigSel:3; // =0: DIGA/B/C/D/E/F
+ UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also refered as DIGA/B/C/D/E/F)
UCHAR ucReserved1:1;
#endif
}ATOM_DIG_ENCODER_CONFIG_V3;
+#define ATOM_ENCODER_CONFIG_V3_DPLINKRATE_MASK 0x03
+#define ATOM_ENCODER_CONFIG_V3_DPLINKRATE_1_62GHZ 0x00
+#define ATOM_ENCODER_CONFIG_V3_DPLINKRATE_2_70GHZ 0x01
#define ATOM_ENCODER_CONFIG_V3_ENCODER_SEL 0x70
-
+#define ATOM_ENCODER_CONFIG_V3_DIG0_ENCODER 0x00
+#define ATOM_ENCODER_CONFIG_V3_DIG1_ENCODER 0x10
+#define ATOM_ENCODER_CONFIG_V3_DIG2_ENCODER 0x20
+#define ATOM_ENCODER_CONFIG_V3_DIG3_ENCODER 0x30
+#define ATOM_ENCODER_CONFIG_V3_DIG4_ENCODER 0x40
+#define ATOM_ENCODER_CONFIG_V3_DIG5_ENCODER 0x50
typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V3
{
@@ -707,6 +777,56 @@ typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V3
UCHAR ucReserved;
}DIG_ENCODER_CONTROL_PARAMETERS_V3;
+//ucTableFormatRevision=1
+//ucTableContentRevision=4
+// start from NI
+// Following function ENABLE sub-function will be used by driver when TMDS/HDMI/LVDS is used, disable function will be used by driver
+typedef struct _ATOM_DIG_ENCODER_CONFIG_V4
+{
+#if ATOM_BIG_ENDIAN
+ UCHAR ucReserved1:1;
+ UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also refered as DIGA/B/C/D/E/F)
+ UCHAR ucReserved:2;
+ UCHAR ucDPLinkRate:2; // =0: 1.62Ghz, =1: 2.7Ghz, 2=5.4Ghz <= Changed comparing to previous version
+#else
+ UCHAR ucDPLinkRate:2; // =0: 1.62Ghz, =1: 2.7Ghz, 2=5.4Ghz <= Changed comparing to previous version
+ UCHAR ucReserved:2;
+ UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also refered as DIGA/B/C/D/E/F)
+ UCHAR ucReserved1:1;
+#endif
+}ATOM_DIG_ENCODER_CONFIG_V4;
+
+#define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_MASK 0x03
+#define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_1_62GHZ 0x00
+#define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_2_70GHZ 0x01
+#define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_5_40GHZ 0x02
+#define ATOM_ENCODER_CONFIG_V4_ENCODER_SEL 0x70
+#define ATOM_ENCODER_CONFIG_V4_DIG0_ENCODER 0x00
+#define ATOM_ENCODER_CONFIG_V4_DIG1_ENCODER 0x10
+#define ATOM_ENCODER_CONFIG_V4_DIG2_ENCODER 0x20
+#define ATOM_ENCODER_CONFIG_V4_DIG3_ENCODER 0x30
+#define ATOM_ENCODER_CONFIG_V4_DIG4_ENCODER 0x40
+#define ATOM_ENCODER_CONFIG_V4_DIG5_ENCODER 0x50
+
+typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V4
+{
+ USHORT usPixelClock; // in 10KHz; for bios convenient
+ union{
+ ATOM_DIG_ENCODER_CONFIG_V4 acConfig;
+ UCHAR ucConfig;
+ };
+ UCHAR ucAction;
+ UCHAR ucEncoderMode;
+ // =0: DP encoder
+ // =1: LVDS encoder
+ // =2: DVI encoder
+ // =3: HDMI encoder
+ // =4: SDVO encoder
+ // =5: DP audio
+ UCHAR ucLaneNum; // how many lanes to enable
+ UCHAR ucBitPerColor; // only valid for DP mode when ucAction = ATOM_ENCODER_CMD_SETUP
+ UCHAR ucHPD_ID; // HPD ID (1-6). =0 means to skip HDP programming. New comparing to previous version
+}DIG_ENCODER_CONTROL_PARAMETERS_V4;
// define ucBitPerColor:
#define PANEL_BPC_UNDEFINE 0x00
@@ -893,6 +1013,7 @@ typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V3
#endif
}ATOM_DIG_TRANSMITTER_CONFIG_V3;
+
typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V3
{
union
@@ -936,6 +1057,149 @@ typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V3
#define ATOM_TRANSMITTER_CONFIG_V3_TRANSMITTER2 0x40 //CD
#define ATOM_TRANSMITTER_CONFIG_V3_TRANSMITTER3 0x80 //EF
+
+/****************************************************************************/
+// Structures used by UNIPHYTransmitterControlTable V1.4
+// ASIC Families: NI
+// ucTableFormatRevision=1
+// ucTableContentRevision=4
+/****************************************************************************/
+typedef struct _ATOM_DP_VS_MODE_V4
+{
+ UCHAR ucLaneSel;
+ union
+ {
+ UCHAR ucLaneSet;
+ struct {
+#if ATOM_BIG_ENDIAN
+ UCHAR ucPOST_CURSOR2:2; //Bit[7:6] Post Cursor2 Level <= New in V4
+ UCHAR ucPRE_EMPHASIS:3; //Bit[5:3] Pre-emphasis Level
+ UCHAR ucVOLTAGE_SWING:3; //Bit[2:0] Voltage Swing Level
+#else
+ UCHAR ucVOLTAGE_SWING:3; //Bit[2:0] Voltage Swing Level
+ UCHAR ucPRE_EMPHASIS:3; //Bit[5:3] Pre-emphasis Level
+ UCHAR ucPOST_CURSOR2:2; //Bit[7:6] Post Cursor2 Level <= New in V4
+#endif
+ };
+ };
+}ATOM_DP_VS_MODE_V4;
+
+typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V4
+{
+#if ATOM_BIG_ENDIAN
+ UCHAR ucTransmitterSel:2; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB )
+ // =1 Dig Transmitter 2 ( Uniphy CD )
+ // =2 Dig Transmitter 3 ( Uniphy EF )
+ UCHAR ucRefClkSource:2; //bit5:4: PPLL1 =0, PPLL2=1, DCPLL=2, EXT_CLK=3 <= New
+ UCHAR ucEncoderSel:1; //bit3=0: Data/Clk path source from DIGA/C/E. =1: Data/clk path source from DIGB/D/F
+ UCHAR ucLinkSel:1; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E
+ // =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F
+ UCHAR fCoherentMode:1; //bit1=1: Coherent Mode ( for DVI/HDMI mode )
+ UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector
+#else
+ UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector
+ UCHAR fCoherentMode:1; //bit1=1: Coherent Mode ( for DVI/HDMI mode )
+ UCHAR ucLinkSel:1; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E
+ // =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F
+ UCHAR ucEncoderSel:1; //bit3=0: Data/Clk path source from DIGA/C/E. =1: Data/clk path source from DIGB/D/F
+ UCHAR ucRefClkSource:2; //bit5:4: PPLL1 =0, PPLL2=1, DCPLL=2, EXT_CLK=3 <= New
+ UCHAR ucTransmitterSel:2; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB )
+ // =1 Dig Transmitter 2 ( Uniphy CD )
+ // =2 Dig Transmitter 3 ( Uniphy EF )
+#endif
+}ATOM_DIG_TRANSMITTER_CONFIG_V4;
+
+typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V4
+{
+ union
+ {
+ USHORT usPixelClock; // in 10KHz; for bios convenient
+ USHORT usInitInfo; // when init uniphy,lower 8bit is used for connector type defined in objectid.h
+ ATOM_DP_VS_MODE_V4 asMode; // DP Voltage swing mode Redefined comparing to previous version
+ };
+ union
+ {
+ ATOM_DIG_TRANSMITTER_CONFIG_V4 acConfig;
+ UCHAR ucConfig;
+ };
+ UCHAR ucAction; // define as ATOM_TRANSMITER_ACTION_XXX
+ UCHAR ucLaneNum;
+ UCHAR ucReserved[3];
+}DIG_TRANSMITTER_CONTROL_PARAMETERS_V4;
+
+//ucConfig
+//Bit0
+#define ATOM_TRANSMITTER_CONFIG_V4_DUAL_LINK_CONNECTOR 0x01
+//Bit1
+#define ATOM_TRANSMITTER_CONFIG_V4_COHERENT 0x02
+//Bit2
+#define ATOM_TRANSMITTER_CONFIG_V4_LINK_SEL_MASK 0x04
+#define ATOM_TRANSMITTER_CONFIG_V4_LINKA 0x00
+#define ATOM_TRANSMITTER_CONFIG_V4_LINKB 0x04
+// Bit3
+#define ATOM_TRANSMITTER_CONFIG_V4_ENCODER_SEL_MASK 0x08
+#define ATOM_TRANSMITTER_CONFIG_V4_DIG1_ENCODER 0x00
+#define ATOM_TRANSMITTER_CONFIG_V4_DIG2_ENCODER 0x08
+// Bit5:4
+#define ATOM_TRANSMITTER_CONFIG_V4_REFCLK_SEL_MASK 0x30
+#define ATOM_TRANSMITTER_CONFIG_V4_P1PLL 0x00
+#define ATOM_TRANSMITTER_CONFIG_V4_P2PLL 0x10
+#define ATOM_TRANSMITTER_CONFIG_V4_DCPLL 0x20 // New in _V4
+#define ATOM_TRANSMITTER_CONFIG_V4_REFCLK_SRC_EXT 0x30 // Changed comparing to V3
+// Bit7:6
+#define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER_SEL_MASK 0xC0
+#define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER1 0x00 //AB
+#define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER2 0x40 //CD
+#define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER3 0x80 //EF
+
+
+/****************************************************************************/
+// Structures used by ExternalEncoderControlTable V1.3
+// ASIC Families: Evergreen, Llano, NI
+// ucTableFormatRevision=1
+// ucTableContentRevision=3
+/****************************************************************************/
+
+typedef struct _EXTERNAL_ENCODER_CONTROL_PARAMETERS_V3
+{
+ union{
+ USHORT usPixelClock; // pixel clock in 10Khz, valid when ucAction=SETUP/ENABLE_OUTPUT
+ USHORT usConnectorId; // connector id, valid when ucAction = INIT
+ };
+ UCHAR ucConfig; // indicate which encoder, and DP link rate when ucAction = SETUP/ENABLE_OUTPUT
+ UCHAR ucAction; //
+ UCHAR ucEncoderMode; // encoder mode, only used when ucAction = SETUP/ENABLE_OUTPUT
+ UCHAR ucLaneNum; // lane number, only used when ucAction = SETUP/ENABLE_OUTPUT
+ UCHAR ucBitPerColor; // output bit per color, only valid when ucAction = SETUP/ENABLE_OUTPUT and ucEncodeMode= DP
+ UCHAR ucReserved;
+}EXTERNAL_ENCODER_CONTROL_PARAMETERS_V3;
+
+// ucAction
+#define EXTERNAL_ENCODER_ACTION_V3_DISABLE_OUTPUT 0x00
+#define EXTERNAL_ENCODER_ACTION_V3_ENABLE_OUTPUT 0x01
+#define EXTERNAL_ENCODER_ACTION_V3_ENCODER_INIT 0x07
+#define EXTERNAL_ENCODER_ACTION_V3_ENCODER_SETUP 0x0f
+#define EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING_OFF 0x10
+#define EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING 0x11
+#define EXTERNAL_ENCODER_ACTION_V3_DACLOAD_DETECTION 0x12
+
+// ucConfig
+#define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_MASK 0x03
+#define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_1_62GHZ 0x00
+#define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_2_70GHZ 0x01
+#define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_5_40GHZ 0x02
+#define EXTERNAL_ENCODER_CONFIG_V3_ENCODER_SEL_MASK 0x70
+#define EXTERNAL_ENCODER_CONFIG_V3_ENCODER1 0x00
+#define EXTERNAL_ENCODER_CONFIG_V3_ENCODER2 0x10
+#define EXTERNAL_ENCODER_CONFIG_V3_ENCODER3 0x20
+
+typedef struct _EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION_V3
+{
+ EXTERNAL_ENCODER_CONTROL_PARAMETERS_V3 sExtEncoder;
+ ULONG ulReserved[2];
+}EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION_V3;
+
+
/****************************************************************************/
// Structures used by DAC1OuputControlTable
// DAC2OuputControlTable
@@ -1142,6 +1406,7 @@ typedef struct _PIXEL_CLOCK_PARAMETERS_V2
#define PIXEL_CLOCK_V4_MISC_SS_ENABLE 0x10
#define PIXEL_CLOCK_V4_MISC_COHERENT_MODE 0x20
+
typedef struct _PIXEL_CLOCK_PARAMETERS_V3
{
USHORT usPixelClock; // in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div)
@@ -1202,6 +1467,55 @@ typedef struct _PIXEL_CLOCK_PARAMETERS_V5
#define PIXEL_CLOCK_V5_MISC_HDMI_32BPP 0x08
#define PIXEL_CLOCK_V5_MISC_REF_DIV_SRC 0x10
+typedef struct _CRTC_PIXEL_CLOCK_FREQ
+{
+#if ATOM_BIG_ENDIAN
+ ULONG ucCRTC:8; // ATOM_CRTC1~6, indicate the CRTC controller to
+ // drive the pixel clock. not used for DCPLL case.
+ ULONG ulPixelClock:24; // target the pixel clock to drive the CRTC timing.
+ // 0 means disable PPLL/DCPLL. Expanded to 24 bits comparing to previous version.
+#else
+ ULONG ulPixelClock:24; // target the pixel clock to drive the CRTC timing.
+ // 0 means disable PPLL/DCPLL. Expanded to 24 bits comparing to previous version.
+ ULONG ucCRTC:8; // ATOM_CRTC1~6, indicate the CRTC controller to
+ // drive the pixel clock. not used for DCPLL case.
+#endif
+}CRTC_PIXEL_CLOCK_FREQ;
+
+typedef struct _PIXEL_CLOCK_PARAMETERS_V6
+{
+ union{
+ CRTC_PIXEL_CLOCK_FREQ ulCrtcPclkFreq; // pixel clock and CRTC id frequency
+ ULONG ulDispEngClkFreq; // dispclk frequency
+ };
+ USHORT usFbDiv; // feedback divider integer part.
+ UCHAR ucPostDiv; // post divider.
+ UCHAR ucRefDiv; // Reference divider
+ UCHAR ucPpll; // ATOM_PPLL1/ATOM_PPLL2/ATOM_DCPLL
+ UCHAR ucTransmitterID; // ASIC encoder id defined in objectId.h,
+ // indicate which graphic encoder will be used.
+ UCHAR ucEncoderMode; // Encoder mode:
+ UCHAR ucMiscInfo; // bit[0]= Force program PPLL
+ // bit[1]= when VGA timing is used.
+ // bit[3:2]= HDMI panel bit depth: =0: 24bpp =1:30bpp, =2:32bpp
+ // bit[4]= RefClock source for PPLL.
+ // =0: XTLAIN( default mode )
+ // =1: other external clock source, which is pre-defined
+ // by VBIOS depend on the feature required.
+ // bit[7:5]: reserved.
+ ULONG ulFbDivDecFrac; // 20 bit feedback divider decimal fraction part, range from 1~999999 ( 0.000001 to 0.999999 )
+
+}PIXEL_CLOCK_PARAMETERS_V6;
+
+#define PIXEL_CLOCK_V6_MISC_FORCE_PROG_PPLL 0x01
+#define PIXEL_CLOCK_V6_MISC_VGA_MODE 0x02
+#define PIXEL_CLOCK_V6_MISC_HDMI_BPP_MASK 0x0c
+#define PIXEL_CLOCK_V6_MISC_HDMI_24BPP 0x00
+#define PIXEL_CLOCK_V6_MISC_HDMI_36BPP 0x04
+#define PIXEL_CLOCK_V6_MISC_HDMI_30BPP 0x08
+#define PIXEL_CLOCK_V6_MISC_HDMI_48BPP 0x0c
+#define PIXEL_CLOCK_V6_MISC_REF_DIV_SRC 0x10
+
typedef struct _GET_DISP_PLL_STATUS_INPUT_PARAMETERS_V2
{
PIXEL_CLOCK_PARAMETERS_V3 sDispClkInput;
@@ -1241,10 +1555,11 @@ typedef struct _ADJUST_DISPLAY_PLL_PARAMETERS
typedef struct _ADJUST_DISPLAY_PLL_INPUT_PARAMETERS_V3
{
USHORT usPixelClock; // target pixel clock
- UCHAR ucTransmitterID; // transmitter id defined in objectid.h
+ UCHAR ucTransmitterID; // GPU transmitter id defined in objectid.h
UCHAR ucEncodeMode; // encoder mode: CRT, LVDS, DP, TMDS or HDMI
UCHAR ucDispPllConfig; // display pll configure parameter defined as following DISPPLL_CONFIG_XXXX
- UCHAR ucReserved[3];
+ UCHAR ucExtTransmitterID; // external encoder id.
+ UCHAR ucReserved[2];
}ADJUST_DISPLAY_PLL_INPUT_PARAMETERS_V3;
// usDispPllConfig v1.2 for RoadRunner
@@ -1358,6 +1673,7 @@ typedef struct _SET_UP_HW_I2C_DATA_PARAMETERS
/**************************************************************************/
#define SPEED_FAN_CONTROL_PS_ALLOCATION WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
+
/****************************************************************************/
// Structures used by PowerConnectorDetectionTable
/****************************************************************************/
@@ -1438,6 +1754,31 @@ typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL_V2
#define ATOM_PPLL_SS_AMOUNT_V2_NFRAC_MASK 0x0F00
#define ATOM_PPLL_SS_AMOUNT_V2_NFRAC_SHIFT 8
+// Used by DCE5.0
+ typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL_V3
+{
+ USHORT usSpreadSpectrumAmountFrac; // SS_AMOUNT_DSFRAC New in DCE5.0
+ UCHAR ucSpreadSpectrumType; // Bit[0]: 0-Down Spread,1-Center Spread.
+ // Bit[1]: 1-Ext. 0-Int.
+ // Bit[3:2]: =0 P1PLL =1 P2PLL =2 DCPLL
+ // Bits[7:4] reserved
+ UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE
+ USHORT usSpreadSpectrumAmount; // Includes SS_AMOUNT_FBDIV[7:0] and SS_AMOUNT_NFRAC_SLIP[11:8]
+ USHORT usSpreadSpectrumStep; // SS_STEP_SIZE_DSFRAC
+}ENABLE_SPREAD_SPECTRUM_ON_PPLL_V3;
+
+#define ATOM_PPLL_SS_TYPE_V3_DOWN_SPREAD 0x00
+#define ATOM_PPLL_SS_TYPE_V3_CENTRE_SPREAD 0x01
+#define ATOM_PPLL_SS_TYPE_V3_EXT_SPREAD 0x02
+#define ATOM_PPLL_SS_TYPE_V3_PPLL_SEL_MASK 0x0c
+#define ATOM_PPLL_SS_TYPE_V3_P1PLL 0x00
+#define ATOM_PPLL_SS_TYPE_V3_P2PLL 0x04
+#define ATOM_PPLL_SS_TYPE_V3_DCPLL 0x08
+#define ATOM_PPLL_SS_AMOUNT_V3_FBDIV_MASK 0x00FF
+#define ATOM_PPLL_SS_AMOUNT_V3_FBDIV_SHIFT 0
+#define ATOM_PPLL_SS_AMOUNT_V3_NFRAC_MASK 0x0F00
+#define ATOM_PPLL_SS_AMOUNT_V3_NFRAC_SHIFT 8
+
#define ENABLE_SPREAD_SPECTRUM_ON_PPLL_PS_ALLOCATION ENABLE_SPREAD_SPECTRUM_ON_PPLL
/**************************************************************************/
@@ -1706,7 +2047,7 @@ typedef struct _ATOM_MASTER_LIST_OF_DATA_TABLES
USHORT StandardVESA_Timing; // Only used by Bios
USHORT FirmwareInfo; // Shared by various SW components,latest version 1.4
USHORT DAC_Info; // Will be obsolete from R600
- USHORT LVDS_Info; // Shared by various SW components,latest version 1.1
+ USHORT LCD_Info; // Shared by various SW components,latest version 1.3, was called LVDS_Info
USHORT TMDS_Info; // Will be obsolete from R600
USHORT AnalogTV_Info; // Shared by various SW components,latest version 1.1
USHORT SupportedDevicesInfo; // Will be obsolete from R600
@@ -1736,12 +2077,16 @@ typedef struct _ATOM_MASTER_LIST_OF_DATA_TABLES
USHORT PowerSourceInfo; // Shared by various SW components, latest versoin 1.1
}ATOM_MASTER_LIST_OF_DATA_TABLES;
+// For backward compatible
+#define LVDS_Info LCD_Info
+
typedef struct _ATOM_MASTER_DATA_TABLE
{
ATOM_COMMON_TABLE_HEADER sHeader;
ATOM_MASTER_LIST_OF_DATA_TABLES ListOfDataTables;
}ATOM_MASTER_DATA_TABLE;
+
/****************************************************************************/
// Structure used in MultimediaCapabilityInfoTable
/****************************************************************************/
@@ -1776,6 +2121,7 @@ typedef struct _ATOM_MULTIMEDIA_CONFIG_INFO
UCHAR ucVideoInput4Info;// Video Input 4 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6)
}ATOM_MULTIMEDIA_CONFIG_INFO;
+
/****************************************************************************/
// Structures used in FirmwareInfoTable
/****************************************************************************/
@@ -2031,8 +2377,47 @@ typedef struct _ATOM_FIRMWARE_INFO_V2_1
UCHAR ucReserved4[3];
}ATOM_FIRMWARE_INFO_V2_1;
+//the structure below to be used from NI
+//ucTableFormatRevision=2
+//ucTableContentRevision=2
+typedef struct _ATOM_FIRMWARE_INFO_V2_2
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ULONG ulFirmwareRevision;
+ ULONG ulDefaultEngineClock; //In 10Khz unit
+ ULONG ulDefaultMemoryClock; //In 10Khz unit
+ ULONG ulReserved[2];
+ ULONG ulReserved1; //Was ulMaxEngineClockPLL_Output; //In 10Khz unit*
+ ULONG ulReserved2; //Was ulMaxMemoryClockPLL_Output; //In 10Khz unit*
+ ULONG ulMaxPixelClockPLL_Output; //In 10Khz unit
+ ULONG ulBinaryAlteredInfo; //Was ulASICMaxEngineClock ?
+ ULONG ulDefaultDispEngineClkFreq; //In 10Khz unit. This is the frequency before DCDTO, corresponding to usBootUpVDDCVoltage.
+ UCHAR ucReserved3; //Was ucASICMaxTemperature;
+ UCHAR ucMinAllowedBL_Level;
+ USHORT usBootUpVDDCVoltage; //In MV unit
+ USHORT usLcdMinPixelClockPLL_Output; // In MHz unit
+ USHORT usLcdMaxPixelClockPLL_Output; // In MHz unit
+ ULONG ulReserved4; //Was ulAsicMaximumVoltage
+ ULONG ulMinPixelClockPLL_Output; //In 10Khz unit
+ ULONG ulReserved5; //Was usMinEngineClockPLL_Input and usMaxEngineClockPLL_Input
+ ULONG ulReserved6; //Was usMinEngineClockPLL_Output and usMinMemoryClockPLL_Input
+ ULONG ulReserved7; //Was usMaxMemoryClockPLL_Input and usMinMemoryClockPLL_Output
+ USHORT usReserved11; //Was usMaxPixelClock; //In 10Khz unit, Max. Pclk used only for DAC
+ USHORT usMinPixelClockPLL_Input; //In 10Khz unit
+ USHORT usMaxPixelClockPLL_Input; //In 10Khz unit
+ USHORT usBootUpVDDCIVoltage; //In unit of mv; Was usMinPixelClockPLL_Output;
+ ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
+ USHORT usCoreReferenceClock; //In 10Khz unit
+ USHORT usMemoryReferenceClock; //In 10Khz unit
+ USHORT usUniphyDPModeExtClkFreq; //In 10Khz unit, if it is 0, In DP Mode Uniphy Input clock from internal PPLL, otherwise Input clock from external Spread clock
+ UCHAR ucMemoryModule_ID; //Indicate what is the board design
+ UCHAR ucReserved9[3];
+ USHORT usBootUpMVDDCVoltage; //In unit of mv; Was usMinPixelClockPLL_Output;
+ USHORT usReserved12;
+ ULONG ulReserved10[3]; // New added comparing to previous version
+}ATOM_FIRMWARE_INFO_V2_2;
-#define ATOM_FIRMWARE_INFO_LAST ATOM_FIRMWARE_INFO_V2_1
+#define ATOM_FIRMWARE_INFO_LAST ATOM_FIRMWARE_INFO_V2_2
/****************************************************************************/
// Structures used in IntegratedSystemInfoTable
@@ -2212,7 +2597,7 @@ ulDockingPinCFGInfo: [15:0]-Bus/Device/Function # to CFG to read this Docking Pi
ucDockingPinBit: which bit in this register to read the pin status;
ucDockingPinPolarity:Polarity of the pin when docked;
-ulCPUCapInfo: [7:0]=1:Griffin;[7:0]=2:Greyhound;[7:0]=3:K8, other bits reserved for now and must be 0x0
+ulCPUCapInfo: [7:0]=1:Griffin;[7:0]=2:Greyhound;[7:0]=3:K8, [7:0]=4:Pharaoh, other bits reserved for now and must be 0x0
usNumberOfCyclesInPeriod:Indicate how many cycles when PWM duty is 100%.
@@ -2250,6 +2635,14 @@ usMinUpStreamHTLinkWidth: Asymmetric link width support in the future, to rep
usMinDownStreamHTLinkWidth: same as above.
*/
+// ATOM_INTEGRATED_SYSTEM_INFO::ulCPUCapInfo - CPU type definition
+#define INTEGRATED_SYSTEM_INFO__UNKNOWN_CPU 0
+#define INTEGRATED_SYSTEM_INFO__AMD_CPU__GRIFFIN 1
+#define INTEGRATED_SYSTEM_INFO__AMD_CPU__GREYHOUND 2
+#define INTEGRATED_SYSTEM_INFO__AMD_CPU__K8 3
+#define INTEGRATED_SYSTEM_INFO__AMD_CPU__PHARAOH 4
+
+#define INTEGRATED_SYSTEM_INFO__AMD_CPU__MAX_CODE INTEGRATED_SYSTEM_INFO__AMD_CPU__PHARAOH // this deff reflects max defined CPU code
#define SYSTEM_CONFIG_POWEREXPRESS_ENABLE 0x00000001
#define SYSTEM_CONFIG_RUN_AT_OVERDRIVE_ENGINE 0x00000002
@@ -2778,8 +3171,88 @@ typedef struct _ATOM_LVDS_INFO_V12
#define PANEL_RANDOM_DITHER 0x80
#define PANEL_RANDOM_DITHER_MASK 0x80
+#define ATOM_LVDS_INFO_LAST ATOM_LVDS_INFO_V12 // no need to change this
+
+/****************************************************************************/
+// Structures used by LCD_InfoTable V1.3 Note: previous version was called ATOM_LVDS_INFO_V12
+// ASIC Families: NI
+// ucTableFormatRevision=1
+// ucTableContentRevision=3
+/****************************************************************************/
+typedef struct _ATOM_LCD_INFO_V13
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_DTD_FORMAT sLCDTiming;
+ USHORT usExtInfoTableOffset;
+ USHORT usSupportedRefreshRate; //Refer to panel info table in ATOMBIOS extension Spec.
+ ULONG ulReserved0;
+ UCHAR ucLCD_Misc; // Reorganized in V13
+ // Bit0: {=0:single, =1:dual},
+ // Bit1: {=0:LDI format for RGB888, =1 FPDI format for RGB888} // was {=0:666RGB, =1:888RGB},
+ // Bit3:2: {Grey level}
+ // Bit6:4 Color Bit Depth definition (see below definition in EDID V1.4 @BYTE 14h)
+ // Bit7 Reserved. was for ATOM_PANEL_MISC_API_ENABLED, still need it?
+ UCHAR ucPanelDefaultRefreshRate;
+ UCHAR ucPanelIdentification;
+ UCHAR ucSS_Id;
+ USHORT usLCDVenderID;
+ USHORT usLCDProductID;
+ UCHAR ucLCDPanel_SpecialHandlingCap; // Reorganized in V13
+ // Bit0: Once DAL sees this CAP is set, it will read EDID from LCD on its own
+ // Bit1: See LCDPANEL_CAP_DRR_SUPPORTED
+ // Bit2: a quick reference whether an embadded panel (LCD1 ) is LVDS (0) or eDP (1)
+ // Bit7-3: Reserved
+ UCHAR ucPanelInfoSize; // start from ATOM_DTD_FORMAT to end of panel info, include ExtInfoTable
+ USHORT usBacklightPWM; // Backlight PWM in Hz. New in _V13
+
+ UCHAR ucPowerSequenceDIGONtoDE_in4Ms;
+ UCHAR ucPowerSequenceDEtoVARY_BL_in4Ms;
+ UCHAR ucPowerSequenceDEtoDIGON_in4Ms;
+ UCHAR ucPowerSequenceVARY_BLtoDE_in4Ms;
+
+ UCHAR ucOffDelay_in4Ms;
+ UCHAR ucPowerSequenceVARY_BLtoBLON_in4Ms;
+ UCHAR ucPowerSequenceBLONtoVARY_BL_in4Ms;
+ UCHAR ucReserved1;
+
+ ULONG ulReserved[4];
+}ATOM_LCD_INFO_V13;
+
+#define ATOM_LCD_INFO_LAST ATOM_LCD_INFO_V13
+
+//Definitions for ucLCD_Misc
+#define ATOM_PANEL_MISC_V13_DUAL 0x00000001
+#define ATOM_PANEL_MISC_V13_FPDI 0x00000002
+#define ATOM_PANEL_MISC_V13_GREY_LEVEL 0x0000000C
+#define ATOM_PANEL_MISC_V13_GREY_LEVEL_SHIFT 2
+#define ATOM_PANEL_MISC_V13_COLOR_BIT_DEPTH_MASK 0x70
+#define ATOM_PANEL_MISC_V13_6BIT_PER_COLOR 0x10
+#define ATOM_PANEL_MISC_V13_8BIT_PER_COLOR 0x20
+
+//Color Bit Depth definition in EDID V1.4 @BYTE 14h
+//Bit 6 5 4
+ // 0 0 0 - Color bit depth is undefined
+ // 0 0 1 - 6 Bits per Primary Color
+ // 0 1 0 - 8 Bits per Primary Color
+ // 0 1 1 - 10 Bits per Primary Color
+ // 1 0 0 - 12 Bits per Primary Color
+ // 1 0 1 - 14 Bits per Primary Color
+ // 1 1 0 - 16 Bits per Primary Color
+ // 1 1 1 - Reserved
+
+//Definitions for ucLCDPanel_SpecialHandlingCap:
+
+//Once DAL sees this CAP is set, it will read EDID from LCD on its own instead of using sLCDTiming in ATOM_LVDS_INFO_V12.
+//Other entries in ATOM_LVDS_INFO_V12 are still valid/useful to DAL
+#define LCDPANEL_CAP_V13_READ_EDID 0x1 // = LCDPANEL_CAP_READ_EDID no change comparing to previous version
-#define ATOM_LVDS_INFO_LAST ATOM_LVDS_INFO_V12
+//If a design supports DRR (dynamic refresh rate) on internal panels (LVDS or EDP), this cap is set in ucLCDPanel_SpecialHandlingCap together
+//with multiple supported refresh rates at usSupportedRefreshRate. This cap should not be set when only slow refresh rate is supported (static
+//refresh rate switch by SW. This is only valid from ATOM_LVDS_INFO_V12
+#define LCDPANEL_CAP_V13_DRR_SUPPORTED 0x2 // = LCDPANEL_CAP_DRR_SUPPORTED no change comparing to previous version
+
+//Use this cap bit for a quick reference whether an embadded panel (LCD1 ) is LVDS or eDP.
+#define LCDPANEL_CAP_V13_eDP 0x4 // = LCDPANEL_CAP_eDP no change comparing to previous version
typedef struct _ATOM_PATCH_RECORD_MODE
{
@@ -2944,9 +3417,9 @@ typedef struct _ATOM_DPCD_INFO
#define MAX_DTD_MODE_IN_VRAM 6
#define ATOM_DTD_MODE_SUPPORT_TBL_SIZE (MAX_DTD_MODE_IN_VRAM*28) //28= (SIZEOF ATOM_DTD_FORMAT)
#define ATOM_STD_MODE_SUPPORT_TBL_SIZE 32*8 //32 is a predefined number,8= (SIZEOF ATOM_STD_FORMAT)
-#define DFP_ENCODER_TYPE_OFFSET 0x80
-#define DP_ENCODER_LANE_NUM_OFFSET 0x84
-#define DP_ENCODER_LINK_RATE_OFFSET 0x88
+//20 bytes for Encoder Type and DPCD in STD EDID area
+#define DFP_ENCODER_TYPE_OFFSET (ATOM_EDID_RAW_DATASIZE + ATOM_DTD_MODE_SUPPORT_TBL_SIZE + ATOM_STD_MODE_SUPPORT_TBL_SIZE - 20)
+#define ATOM_DP_DPCD_OFFSET (DFP_ENCODER_TYPE_OFFSET + 4 )
#define ATOM_HWICON1_SURFACE_ADDR 0
#define ATOM_HWICON2_SURFACE_ADDR (ATOM_HWICON1_SURFACE_ADDR + ATOM_HWICON_SURFACE_SIZE)
@@ -2997,14 +3470,16 @@ typedef struct _ATOM_DPCD_INFO
#define ATOM_DFP5_DTD_MODE_TBL_ADDR (ATOM_DFP5_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
#define ATOM_DFP5_STD_MODE_TBL_ADDR (ATOM_DFP5_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
-#define ATOM_DP_TRAINING_TBL_ADDR (ATOM_DFP5_STD_MODE_TBL_ADDR+ATOM_STD_MODE_SUPPORT_TBL_SIZE)
+#define ATOM_DP_TRAINING_TBL_ADDR (ATOM_DFP5_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
-#define ATOM_STACK_STORAGE_START (ATOM_DP_TRAINING_TBL_ADDR+256)
-#define ATOM_STACK_STORAGE_END ATOM_STACK_STORAGE_START+512
+#define ATOM_STACK_STORAGE_START (ATOM_DP_TRAINING_TBL_ADDR + 1024)
+#define ATOM_STACK_STORAGE_END ATOM_STACK_STORAGE_START + 512
//The size below is in Kb!
#define ATOM_VRAM_RESERVE_SIZE ((((ATOM_STACK_STORAGE_END - ATOM_HWICON1_SURFACE_ADDR)>>10)+4)&0xFFFC)
+#define ATOM_VRAM_RESERVE_V2_SIZE 32
+
#define ATOM_VRAM_OPERATION_FLAGS_MASK 0xC0000000L
#define ATOM_VRAM_OPERATION_FLAGS_SHIFT 30
#define ATOM_VRAM_BLOCK_NEEDS_NO_RESERVATION 0x1
@@ -3206,6 +3681,15 @@ typedef struct _ATOM_DISPLAY_OBJECT_PATH
USHORT usGraphicObjIds[1]; //1st Encoder Obj source from GPU to last Graphic Obj destinate to connector.
}ATOM_DISPLAY_OBJECT_PATH;
+typedef struct _ATOM_DISPLAY_EXTERNAL_OBJECT_PATH
+{
+ USHORT usDeviceTag; //supported device
+ USHORT usSize; //the size of ATOM_DISPLAY_OBJECT_PATH
+ USHORT usConnObjectId; //Connector Object ID
+ USHORT usGPUObjectId; //GPU ID
+ USHORT usGraphicObjIds[2]; //usGraphicObjIds[0]= GPU internal encoder, usGraphicObjIds[1]= external encoder
+}ATOM_DISPLAY_EXTERNAL_OBJECT_PATH;
+
typedef struct _ATOM_DISPLAY_OBJECT_PATH_TABLE
{
UCHAR ucNumOfDispPath;
@@ -3261,6 +3745,47 @@ typedef struct _ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT //usSrcDstTableOffset
#define EXT_AUXDDC_LUTINDEX_7 7
#define MAX_NUMBER_OF_EXT_AUXDDC_LUT_ENTRIES (EXT_AUXDDC_LUTINDEX_7+1)
+//ucChannelMapping are defined as following
+//for DP connector, eDP, DP to VGA/LVDS
+//Bit[1:0]: Define which pin connect to DP connector DP_Lane0, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
+//Bit[3:2]: Define which pin connect to DP connector DP_Lane1, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
+//Bit[5:4]: Define which pin connect to DP connector DP_Lane2, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
+//Bit[7:6]: Define which pin connect to DP connector DP_Lane3, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
+typedef struct _ATOM_DP_CONN_CHANNEL_MAPPING
+{
+#if ATOM_BIG_ENDIAN
+ UCHAR ucDP_Lane3_Source:2;
+ UCHAR ucDP_Lane2_Source:2;
+ UCHAR ucDP_Lane1_Source:2;
+ UCHAR ucDP_Lane0_Source:2;
+#else
+ UCHAR ucDP_Lane0_Source:2;
+ UCHAR ucDP_Lane1_Source:2;
+ UCHAR ucDP_Lane2_Source:2;
+ UCHAR ucDP_Lane3_Source:2;
+#endif
+}ATOM_DP_CONN_CHANNEL_MAPPING;
+
+//for DVI/HDMI, in dual link case, both links have to have same mapping.
+//Bit[1:0]: Define which pin connect to DVI connector data Lane2, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
+//Bit[3:2]: Define which pin connect to DVI connector data Lane1, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
+//Bit[5:4]: Define which pin connect to DVI connector data Lane0, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
+//Bit[7:6]: Define which pin connect to DVI connector clock lane, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
+typedef struct _ATOM_DVI_CONN_CHANNEL_MAPPING
+{
+#if ATOM_BIG_ENDIAN
+ UCHAR ucDVI_CLK_Source:2;
+ UCHAR ucDVI_DATA0_Source:2;
+ UCHAR ucDVI_DATA1_Source:2;
+ UCHAR ucDVI_DATA2_Source:2;
+#else
+ UCHAR ucDVI_DATA2_Source:2;
+ UCHAR ucDVI_DATA1_Source:2;
+ UCHAR ucDVI_DATA0_Source:2;
+ UCHAR ucDVI_CLK_Source:2;
+#endif
+}ATOM_DVI_CONN_CHANNEL_MAPPING;
+
typedef struct _EXT_DISPLAY_PATH
{
USHORT usDeviceTag; //A bit vector to show what devices are supported
@@ -3269,7 +3794,13 @@ typedef struct _EXT_DISPLAY_PATH
UCHAR ucExtAUXDDCLutIndex; //An index into external AUX/DDC channel LUT
UCHAR ucExtHPDPINLutIndex; //An index into external HPD pin LUT
USHORT usExtEncoderObjId; //external encoder object id
- USHORT usReserved[3];
+ union{
+ UCHAR ucChannelMapping; // if ucChannelMapping=0, using default one to one mapping
+ ATOM_DP_CONN_CHANNEL_MAPPING asDPMapping;
+ ATOM_DVI_CONN_CHANNEL_MAPPING asDVIMapping;
+ };
+ UCHAR ucReserved;
+ USHORT usReserved[2];
}EXT_DISPLAY_PATH;
#define NUMBER_OF_UCHAR_FOR_GUID 16
@@ -3281,7 +3812,8 @@ typedef struct _ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO
UCHAR ucGuid [NUMBER_OF_UCHAR_FOR_GUID]; // a GUID is a 16 byte long string
EXT_DISPLAY_PATH sPath[MAX_NUMBER_OF_EXT_DISPLAY_PATH]; // total of fixed 7 entries.
UCHAR ucChecksum; // a simple Checksum of the sum of whole structure equal to 0x0.
- UCHAR Reserved [7]; // for potential expansion
+ UCHAR uc3DStereoPinId; // use for eDP panel
+ UCHAR Reserved [6]; // for potential expansion
}ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO;
//Related definitions, all records are differnt but they have a commond header
@@ -3311,10 +3843,11 @@ typedef struct _ATOM_COMMON_RECORD_HEADER
#define ATOM_CONNECTOR_AUXDDC_LUT_RECORD_TYPE 17 //This is for the case when connectors are not known to object table
#define ATOM_OBJECT_LINK_RECORD_TYPE 18 //Once this record is present under one object, it indicats the oobject is linked to another obj described by the record
#define ATOM_CONNECTOR_REMOTE_CAP_RECORD_TYPE 19
+#define ATOM_ENCODER_CAP_RECORD_TYPE 20
//Must be updated when new record type is added,equal to that record definition!
-#define ATOM_MAX_OBJECT_RECORD_NUMBER ATOM_CONNECTOR_REMOTE_CAP_RECORD_TYPE
+#define ATOM_MAX_OBJECT_RECORD_NUMBER ATOM_ENCODER_CAP_RECORD_TYPE
typedef struct _ATOM_I2C_RECORD
{
@@ -3441,6 +3974,26 @@ typedef struct _ATOM_ENCODER_DVO_CF_RECORD
UCHAR ucPadding[2];
}ATOM_ENCODER_DVO_CF_RECORD;
+// Bit maps for ATOM_ENCODER_CAP_RECORD.ucEncoderCap
+#define ATOM_ENCODER_CAP_RECORD_HBR2 0x01 // DP1.2 HBR2 is supported by this path
+
+typedef struct _ATOM_ENCODER_CAP_RECORD
+{
+ ATOM_COMMON_RECORD_HEADER sheader;
+ union {
+ USHORT usEncoderCap;
+ struct {
+#if ATOM_BIG_ENDIAN
+ USHORT usReserved:15; // Bit1-15 may be defined for other capability in future
+ USHORT usHBR2Cap:1; // Bit0 is for DP1.2 HBR2 capability.
+#else
+ USHORT usHBR2Cap:1; // Bit0 is for DP1.2 HBR2 capability.
+ USHORT usReserved:15; // Bit1-15 may be defined for other capability in future
+#endif
+ };
+ };
+}ATOM_ENCODER_CAP_RECORD;
+
// value for ATOM_CONNECTOR_CF_RECORD.ucConnectedDvoBundle
#define ATOM_CONNECTOR_CF_RECORD_CONNECTED_UPPER12BITBUNDLEA 1
#define ATOM_CONNECTOR_CF_RECORD_CONNECTED_LOWER12BITBUNDLEB 2
@@ -3580,6 +4133,11 @@ typedef struct _ATOM_VOLTAGE_CONTROL
#define VOLTAGE_CONTROL_ID_DAC 0x02 //I2C control, used for R5xx/R6xx MVDDC,MVDDQ or VDDCI
#define VOLTAGE_CONTROL_ID_VT116xM 0x03 //I2C control, used for R6xx Core Voltage
#define VOLTAGE_CONTROL_ID_DS4402 0x04
+#define VOLTAGE_CONTROL_ID_UP6266 0x05
+#define VOLTAGE_CONTROL_ID_SCORPIO 0x06
+#define VOLTAGE_CONTROL_ID_VT1556M 0x07
+#define VOLTAGE_CONTROL_ID_CHL822x 0x08
+#define VOLTAGE_CONTROL_ID_VT1586M 0x09
typedef struct _ATOM_VOLTAGE_OBJECT
{
@@ -3670,66 +4228,157 @@ typedef struct _ATOM_POWER_SOURCE_INFO
#define POWER_SENSOR_GPIO 0x01
#define POWER_SENSOR_I2C 0x02
+typedef struct _ATOM_CLK_VOLT_CAPABILITY
+{
+ ULONG ulVoltageIndex; // The Voltage Index indicated by FUSE, same voltage index shared with SCLK DPM fuse table
+ ULONG ulMaximumSupportedCLK; // Maximum clock supported with specified voltage index, unit in 10kHz
+}ATOM_CLK_VOLT_CAPABILITY;
+
+typedef struct _ATOM_AVAILABLE_SCLK_LIST
+{
+ ULONG ulSupportedSCLK; // Maximum clock supported with specified voltage index, unit in 10kHz
+ USHORT usVoltageIndex; // The Voltage Index indicated by FUSE for specified SCLK
+ USHORT usVoltageID; // The Voltage ID indicated by FUSE for specified SCLK
+}ATOM_AVAILABLE_SCLK_LIST;
+
+// ATOM_INTEGRATED_SYSTEM_INFO_V6 ulSystemConfig cap definition
+#define ATOM_IGP_INFO_V6_SYSTEM_CONFIG__PCIE_POWER_GATING_ENABLE 1 // refer to ulSystemConfig bit[0]
+
+// this IntegrateSystemInfoTable is used for Liano/Ontario APU
typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V6
{
ATOM_COMMON_TABLE_HEADER sHeader;
ULONG ulBootUpEngineClock;
ULONG ulDentistVCOFreq;
ULONG ulBootUpUMAClock;
- ULONG ulReserved1[8];
+ ATOM_CLK_VOLT_CAPABILITY sDISPCLK_Voltage[4];
ULONG ulBootUpReqDisplayVector;
ULONG ulOtherDisplayMisc;
ULONG ulGPUCapInfo;
- ULONG ulReserved2[3];
+ ULONG ulSB_MMIO_Base_Addr;
+ USHORT usRequestedPWMFreqInHz;
+ UCHAR ucHtcTmpLmt;
+ UCHAR ucHtcHystLmt;
+ ULONG ulMinEngineClock;
ULONG ulSystemConfig;
ULONG ulCPUCapInfo;
- USHORT usMaxNBVoltage;
- USHORT usMinNBVoltage;
- USHORT usBootUpNBVoltage;
- USHORT usExtDispConnInfoOffset;
- UCHAR ucHtcTmpLmt;
- UCHAR ucTjOffset;
+ USHORT usNBP0Voltage;
+ USHORT usNBP1Voltage;
+ USHORT usBootUpNBVoltage;
+ USHORT usExtDispConnInfoOffset;
+ USHORT usPanelRefreshRateRange;
UCHAR ucMemoryType;
UCHAR ucUMAChannelNumber;
ULONG ulCSR_M3_ARB_CNTL_DEFAULT[10];
ULONG ulCSR_M3_ARB_CNTL_UVD[10];
ULONG ulCSR_M3_ARB_CNTL_FS3D[10];
- ULONG ulReserved3[42];
+ ATOM_AVAILABLE_SCLK_LIST sAvail_SCLK[5];
+ ULONG ulGMCRestoreResetTime;
+ ULONG ulMinimumNClk;
+ ULONG ulIdleNClk;
+ ULONG ulDDR_DLL_PowerUpTime;
+ ULONG ulDDR_PLL_PowerUpTime;
+ USHORT usPCIEClkSSPercentage;
+ USHORT usPCIEClkSSType;
+ USHORT usLvdsSSPercentage;
+ USHORT usLvdsSSpreadRateIn10Hz;
+ USHORT usHDMISSPercentage;
+ USHORT usHDMISSpreadRateIn10Hz;
+ USHORT usDVISSPercentage;
+ USHORT usDVISSpreadRateIn10Hz;
+ ULONG ulReserved3[21];
ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo;
}ATOM_INTEGRATED_SYSTEM_INFO_V6;
+// ulGPUCapInfo
+#define INTEGRATED_SYSTEM_INFO_V6_GPUCAPINFO__TMDSHDMI_COHERENT_SINGLEPLL_MODE 0x01
+#define INTEGRATED_SYSTEM_INFO_V6_GPUCAPINFO__DISABLE_AUX_HW_MODE_DETECTION 0x08
+
+// ulOtherDisplayMisc
+#define INTEGRATED_SYSTEM_INFO__GET_EDID_CALLBACK_FUNC_SUPPORT 0x01
+
+
/**********************************************************************************************************************
-// ATOM_INTEGRATED_SYSTEM_INFO_V6 Description
-//ulBootUpEngineClock: VBIOS bootup Engine clock frequency, in 10kHz unit.
-//ulDentistVCOFreq: Dentist VCO clock in 10kHz unit.
-//ulBootUpUMAClock: System memory boot up clock frequency in 10Khz unit.
-//ulReserved1[8] Reserved by now, must be 0x0.
-//ulBootUpReqDisplayVector VBIOS boot up display IDs
-// ATOM_DEVICE_CRT1_SUPPORT 0x0001
-// ATOM_DEVICE_CRT2_SUPPORT 0x0010
-// ATOM_DEVICE_DFP1_SUPPORT 0x0008
-// ATOM_DEVICE_DFP6_SUPPORT 0x0040
-// ATOM_DEVICE_DFP2_SUPPORT 0x0080
-// ATOM_DEVICE_DFP3_SUPPORT 0x0200
-// ATOM_DEVICE_DFP4_SUPPORT 0x0400
-// ATOM_DEVICE_DFP5_SUPPORT 0x0800
-// ATOM_DEVICE_LCD1_SUPPORT 0x0002
-//ulOtherDisplayMisc Other display related flags, not defined yet.
-//ulGPUCapInfo TBD
-//ulReserved2[3] must be 0x0 for the reserved.
-//ulSystemConfig TBD
-//ulCPUCapInfo TBD
-//usMaxNBVoltage High NB voltage in unit of mv, calculated using current VDDNB (D24F2xDC) and VDDNB offset fuse.
-//usMinNBVoltage Low NB voltage in unit of mv, calculated using current VDDNB (D24F2xDC) and VDDNB offset fuse.
-//usBootUpNBVoltage Boot up NB voltage in unit of mv.
-//ucHtcTmpLmt Bit [22:16] of D24F3x64 Thermal Control (HTC) Register.
-//ucTjOffset Bit [28:22] of D24F3xE4 Thermtrip Status Register,may not be needed.
-//ucMemoryType [3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved.
-//ucUMAChannelNumber System memory channel numbers.
-//usExtDispConnectionInfoOffset ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO offset relative to beginning of this table.
-//ulCSR_M3_ARB_CNTL_DEFAULT[10] Arrays with values for CSR M3 arbiter for default
-//ulCSR_M3_ARB_CNTL_UVD[10] Arrays with values for CSR M3 arbiter for UVD playback.
-//ulCSR_M3_ARB_CNTL_FS3D[10] Arrays with values for CSR M3 arbiter for Full Screen 3D applications.
+ ATOM_INTEGRATED_SYSTEM_INFO_V6 Description
+ulBootUpEngineClock: VBIOS bootup Engine clock frequency, in 10kHz unit. if it is equal 0, then VBIOS use pre-defined bootup engine clock
+ulDentistVCOFreq: Dentist VCO clock in 10kHz unit.
+ulBootUpUMAClock: System memory boot up clock frequency in 10Khz unit.
+sDISPCLK_Voltage: Report Display clock voltage requirement.
+
+ulBootUpReqDisplayVector: VBIOS boot up display IDs, following are supported devices in Liano/Ontaio projects:
+ ATOM_DEVICE_CRT1_SUPPORT 0x0001
+ ATOM_DEVICE_CRT2_SUPPORT 0x0010
+ ATOM_DEVICE_DFP1_SUPPORT 0x0008
+ ATOM_DEVICE_DFP6_SUPPORT 0x0040
+ ATOM_DEVICE_DFP2_SUPPORT 0x0080
+ ATOM_DEVICE_DFP3_SUPPORT 0x0200
+ ATOM_DEVICE_DFP4_SUPPORT 0x0400
+ ATOM_DEVICE_DFP5_SUPPORT 0x0800
+ ATOM_DEVICE_LCD1_SUPPORT 0x0002
+ulOtherDisplayMisc: Other display related flags, not defined yet.
+ulGPUCapInfo: bit[0]=0: TMDS/HDMI Coherent Mode use cascade PLL mode.
+ =1: TMDS/HDMI Coherent Mode use signel PLL mode.
+ bit[3]=0: Enable HW AUX mode detection logic
+ =1: Disable HW AUX mode dettion logic
+ulSB_MMIO_Base_Addr: Physical Base address to SB MMIO space. Driver needs to initialize it for SMU usage.
+
+usRequestedPWMFreqInHz: When it's set to 0x0 by SBIOS: the LCD BackLight is not controlled by GPU(SW).
+ Any attempt to change BL using VBIOS function or enable VariBri from PP table is not effective since ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==0;
+
+ When it's set to a non-zero frequency, the BackLight is controlled by GPU (SW) in one of two ways below:
+ 1. SW uses the GPU BL PWM output to control the BL, in chis case, this non-zero frequency determines what freq GPU should use;
+ VBIOS will set up proper PWM frequency and ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1,as the result,
+ Changing BL using VBIOS function is functional in both driver and non-driver present environment;
+ and enabling VariBri under the driver environment from PP table is optional.
+
+ 2. SW uses other means to control BL (like DPCD),this non-zero frequency serves as a flag only indicating
+ that BL control from GPU is expected.
+ VBIOS will NOT set up PWM frequency but make ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1
+ Changing BL using VBIOS function could be functional in both driver and non-driver present environment,but
+ it's per platform
+ and enabling VariBri under the driver environment from PP table is optional.
+
+ucHtcTmpLmt: Refer to D18F3x64 bit[22:16], HtcTmpLmt.
+ Threshold on value to enter HTC_active state.
+ucHtcHystLmt: Refer to D18F3x64 bit[27:24], HtcHystLmt.
+ To calculate threshold off value to exit HTC_active state, which is Threshold on vlaue minus ucHtcHystLmt.
+ulMinEngineClock: Minimum SCLK allowed in 10kHz unit. This is calculated based on WRCK Fuse settings.
+ulSystemConfig: Bit[0]=0: PCIE Power Gating Disabled
+ =1: PCIE Power Gating Enabled
+ Bit[1]=0: DDR-DLL shut-down feature disabled.
+ 1: DDR-DLL shut-down feature enabled.
+ Bit[2]=0: DDR-PLL Power down feature disabled.
+ 1: DDR-PLL Power down feature enabled.
+ulCPUCapInfo: TBD
+usNBP0Voltage: VID for voltage on NB P0 State
+usNBP1Voltage: VID for voltage on NB P1 State
+usBootUpNBVoltage: Voltage Index of GNB voltage configured by SBIOS, which is suffcient to support VBIOS DISPCLK requirement.
+usExtDispConnInfoOffset: Offset to sExtDispConnInfo inside the structure
+usPanelRefreshRateRange: Bit vector for LCD supported refresh rate range. If DRR is requestd by the platform, at least two bits need to be set
+ to indicate a range.
+ SUPPORTED_LCD_REFRESHRATE_30Hz 0x0004
+ SUPPORTED_LCD_REFRESHRATE_40Hz 0x0008
+ SUPPORTED_LCD_REFRESHRATE_50Hz 0x0010
+ SUPPORTED_LCD_REFRESHRATE_60Hz 0x0020
+ucMemoryType: [3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved.
+ucUMAChannelNumber: System memory channel numbers.
+ulCSR_M3_ARB_CNTL_DEFAULT[10]: Arrays with values for CSR M3 arbiter for default
+ulCSR_M3_ARB_CNTL_UVD[10]: Arrays with values for CSR M3 arbiter for UVD playback.
+ulCSR_M3_ARB_CNTL_FS3D[10]: Arrays with values for CSR M3 arbiter for Full Screen 3D applications.
+sAvail_SCLK[5]: Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high
+ulGMCRestoreResetTime: GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns.
+ulMinimumNClk: Minimum NCLK speed among all NB-Pstates to calcualte data reconnection latency. Unit in 10kHz.
+ulIdleNClk: NCLK speed while memory runs in self-refresh state. Unit in 10kHz.
+ulDDR_DLL_PowerUpTime: DDR PHY DLL power up time. Unit in ns.
+ulDDR_PLL_PowerUpTime: DDR PHY PLL power up time. Unit in ns.
+usPCIEClkSSPercentage: PCIE Clock Spred Spectrum Percentage in unit 0.01%; 100 mean 1%.
+usPCIEClkSSType: PCIE Clock Spred Spectrum Type. 0 for Down spread(default); 1 for Center spread.
+usLvdsSSPercentage: LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit of 0.01%, =0, use VBIOS default setting.
+usLvdsSSpreadRateIn10Hz: LVDS panel ( not include eDP ) Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting.
+usHDMISSPercentage: HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting.
+usHDMISSpreadRateIn10Hz: HDMI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting.
+usDVISSPercentage: DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting.
+usDVISSpreadRateIn10Hz: DVI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting.
**********************************************************************************************************************/
/**************************************************************************/
@@ -3790,6 +4439,7 @@ typedef struct _ATOM_ASIC_SS_ASSIGNMENT
#define ASIC_INTERNAL_SS_ON_LVDS 6
#define ASIC_INTERNAL_SS_ON_DP 7
#define ASIC_INTERNAL_SS_ON_DCPLL 8
+#define ASIC_EXTERNAL_SS_ON_DP_CLOCK 9
typedef struct _ATOM_ASIC_SS_ASSIGNMENT_V2
{
@@ -3903,6 +4553,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3
#define ATOM_S0_SYSTEM_POWER_STATE_VALUE_AC 1
#define ATOM_S0_SYSTEM_POWER_STATE_VALUE_DC 2
#define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LITEAC 3
+#define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LIT2AC 4
//Byte aligned defintion for BIOS usage
#define ATOM_S0_CRT1_MONOb0 0x01
@@ -4529,7 +5180,8 @@ typedef struct _ATOM_INIT_REG_BLOCK{
#define INDEX_ACCESS_RANGE_BEGIN (VALUE_DWORD + 1)
#define INDEX_ACCESS_RANGE_END (INDEX_ACCESS_RANGE_BEGIN + 1)
#define VALUE_INDEX_ACCESS_SINGLE (INDEX_ACCESS_RANGE_END + 1)
-
+//#define ACCESS_MCIODEBUGIND 0x40 //defined in BIOS code
+#define ACCESS_PLACEHOLDER 0x80
typedef struct _ATOM_MC_INIT_PARAM_TABLE
{
@@ -4554,6 +5206,10 @@ typedef struct _ATOM_MC_INIT_PARAM_TABLE
#define _32Mx32 0x33
#define _64Mx8 0x41
#define _64Mx16 0x42
+#define _64Mx32 0x43
+#define _128Mx8 0x51
+#define _128Mx16 0x52
+#define _256Mx8 0x61
#define SAMSUNG 0x1
#define INFINEON 0x2
@@ -4569,10 +5225,11 @@ typedef struct _ATOM_MC_INIT_PARAM_TABLE
#define QIMONDA INFINEON
#define PROMOS MOSEL
#define KRETON INFINEON
+#define ELIXIR NANYA
/////////////Support for GDDR5 MC uCode to reside in upper 64K of ROM/////////////
-#define UCODE_ROM_START_ADDRESS 0x1c000
+#define UCODE_ROM_START_ADDRESS 0x1b800
#define UCODE_SIGNATURE 0x4375434d // 'MCuC' - MC uCode
//uCode block header for reference
@@ -4903,7 +5560,34 @@ typedef struct _ATOM_VRAM_MODULE_V6
ATOM_MEMORY_TIMING_FORMAT_V2 asMemTiming[5];//Memory Timing block sort from lower clock to higher clock
}ATOM_VRAM_MODULE_V6;
-
+typedef struct _ATOM_VRAM_MODULE_V7
+{
+// Design Specific Values
+ ULONG ulChannelMapCfg; // mmMC_SHARED_CHREMAP
+ USHORT usModuleSize; // Size of ATOM_VRAM_MODULE_V7
+ USHORT usPrivateReserved; // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS)
+ USHORT usReserved;
+ UCHAR ucExtMemoryID; // Current memory module ID
+ UCHAR ucMemoryType; // MEM_TYPE_DDR2/DDR3/GDDR3/GDDR5
+ UCHAR ucChannelNum; // Number of mem. channels supported in this module
+ UCHAR ucChannelWidth; // CHANNEL_16BIT/CHANNEL_32BIT/CHANNEL_64BIT
+ UCHAR ucDensity; // _8Mx32, _16Mx32, _16Mx16, _32Mx16
+ UCHAR ucReserve; // Former container for Mx_FLAGS like DBI_AC_MODE_ENABLE_ASIC for GDDR4. Not used now.
+ UCHAR ucMisc; // RANK_OF_THISMEMORY etc.
+ UCHAR ucVREFI; // Not used.
+ UCHAR ucNPL_RT; // Round trip delay (MC_SEQ_CAS_TIMING [28:24]:TCL=CL+NPL_RT-2). Always 2.
+ UCHAR ucPreamble; // [7:4] Write Preamble, [3:0] Read Preamble
+ UCHAR ucMemorySize; // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros
+ UCHAR ucReserved[3];
+// Memory Module specific values
+ USHORT usEMRS2Value; // EMRS2/MR2 Value.
+ USHORT usEMRS3Value; // EMRS3/MR3 Value.
+ UCHAR ucMemoryVenderID; // [7:4] Revision, [3:0] Vendor code
+ UCHAR ucRefreshRateFactor; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms)
+ UCHAR ucFIFODepth; // FIFO depth can be detected during vendor detection, here is hardcoded per memory
+ UCHAR ucCDR_Bandwidth; // [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth
+ char strMemPNString[20]; // part number end with '0'.
+}ATOM_VRAM_MODULE_V7;
typedef struct _ATOM_VRAM_INFO_V2
{
@@ -4942,6 +5626,20 @@ typedef struct _ATOM_VRAM_INFO_V4
// ATOM_INIT_REG_BLOCK aMemAdjust;
}ATOM_VRAM_INFO_V4;
+typedef struct _ATOM_VRAM_INFO_HEADER_V2_1
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usMemAdjustTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting
+ USHORT usMemClkPatchTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting
+ USHORT usReserved[4];
+ UCHAR ucNumOfVRAMModule; // indicate number of VRAM module
+ UCHAR ucMemoryClkPatchTblVer; // version of memory AC timing register list
+ UCHAR ucVramModuleVer; // indicate ATOM_VRAM_MODUE version
+ UCHAR ucReserved;
+ ATOM_VRAM_MODULE_V7 aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE]; // just for allocation, real number of blocks is in ucNumOfVRAMModule;
+}ATOM_VRAM_INFO_HEADER_V2_1;
+
+
typedef struct _ATOM_VRAM_GPIO_DETECTION_INFO
{
ATOM_COMMON_TABLE_HEADER sHeader;
@@ -5182,6 +5880,16 @@ typedef struct _ASIC_TRANSMITTER_INFO
UCHAR ucReserved;
}ASIC_TRANSMITTER_INFO;
+#define ASIC_TRANSMITTER_INFO_CONFIG__DVO_SDR_MODE 0x01
+#define ASIC_TRANSMITTER_INFO_CONFIG__COHERENT_MODE 0x02
+#define ASIC_TRANSMITTER_INFO_CONFIG__ENCODEROBJ_ID_MASK 0xc4
+#define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_A 0x00
+#define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_B 0x04
+#define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_C 0x40
+#define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_D 0x44
+#define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_E 0x80
+#define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_F 0x84
+
typedef struct _ASIC_ENCODER_INFO
{
UCHAR ucEncoderID;
@@ -5284,6 +5992,28 @@ typedef struct _DP_ENCODER_SERVICE_PARAMETERS
/* /obselete */
#define DP_ENCODER_SERVICE_PS_ALLOCATION WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
+
+typedef struct _DP_ENCODER_SERVICE_PARAMETERS_V2
+{
+ USHORT usExtEncoderObjId; // External Encoder Object Id, output parameter only, use when ucAction = DP_SERVICE_V2_ACTION_DET_EXT_CONNECTION
+ UCHAR ucAuxId;
+ UCHAR ucAction;
+ UCHAR ucSinkType; // Iput and Output parameters.
+ UCHAR ucHPDId; // Input parameter, used when ucAction = DP_SERVICE_V2_ACTION_DET_EXT_CONNECTION
+ UCHAR ucReserved[2];
+}DP_ENCODER_SERVICE_PARAMETERS_V2;
+
+typedef struct _DP_ENCODER_SERVICE_PS_ALLOCATION_V2
+{
+ DP_ENCODER_SERVICE_PARAMETERS_V2 asDPServiceParam;
+ PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS_V2 asAuxParam;
+}DP_ENCODER_SERVICE_PS_ALLOCATION_V2;
+
+// ucAction
+#define DP_SERVICE_V2_ACTION_GET_SINK_TYPE 0x01
+#define DP_SERVICE_V2_ACTION_DET_LCD_CONNECTION 0x02
+
+
// DP_TRAINING_TABLE
#define DPCD_SET_LINKRATE_LANENUM_PATTERN1_TBL_ADDR ATOM_DP_TRAINING_TBL_ADDR
#define DPCD_SET_SS_CNTL_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 8 )
@@ -5339,6 +6069,7 @@ typedef struct _SET_HWBLOCK_INSTANCE_PARAMETER_V2
#define SELECT_DCIO_IMPCAL 4
#define SELECT_DCIO_DIG 6
#define SELECT_CRTC_PIXEL_RATE 7
+#define SELECT_VGA_BLK 8
/****************************************************************************/
//Portion VI: Definitinos for vbios MC scratch registers that driver used
--
1.7.1.1
More information about the dri-devel
mailing list