[RFC v4]update broken web addresses in the kernel.
Justin P. Mattock
justinmattock at gmail.com
Mon Sep 27 20:23:18 PDT 2010
On 09/27/2010 07:59 PM, Finn Thain wrote:
>
> On Sun, 26 Sep 2010, Justin P. Mattock wrote:
>
>> diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c
>> index 033e150..d7d9a78 100644
>> --- a/drivers/char/apm-emulation.c
>> +++ b/drivers/char/apm-emulation.c
>> @@ -8,7 +8,7 @@
>> * (APM) BIOS Interface Specification, Revision 1.2, February 1996.
>> *
>> * [This document is available from Microsoft at:
>> - * http://www.microsoft.com/hwdev/busbios/amp_12.htm]
>> + * http://www.microsoft.com/whdc/archive/amp_12.mspx]
>> */
>
>
> Can we lose the brackets?
>
>
>> #include<linux/module.h>
>> #include<linux/poll.h>
>
>> diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
>> index 280c9b5..b2bd5fb 100644
>> --- a/drivers/firmware/Kconfig
>> +++ b/drivers/firmware/Kconfig
>> @@ -73,8 +73,8 @@ config EFI_PCDP
>> on how the driver discovers devices.
>>
>> You must also enable the appropriate drivers (serial, VGA, etc.)
>> -
>> - See<http://www.dig64.org/specifications/DIG64_HCDPv20_042804.pdf>
>> + See [DIG64_HCDPv20_042804.pdf] available from
>
>
> What are the square brackets for?
>
>
>> + <http://www.dig64.org/specifications/>
>>
>> config DELL_RBU
>> tristate "BIOS update support for DELL systems via sysfs"
>
>> diff --git a/drivers/firmware/pcdp.h b/drivers/firmware/pcdp.h
>> index ce910d6..777d928 100644
>> --- a/drivers/firmware/pcdp.h
>> +++ b/drivers/firmware/pcdp.h
>> @@ -1,8 +1,8 @@
>> /*
>> * Definitions for PCDP-defined console devices
>> *
>> - * v1.0a: http://www.dig64.org/specifications/DIG64_HCDPv10a_01.pdf
>> - * v2.0: http://www.dig64.org/specifications/DIG64_PCDPv20.pdf
>> + * For [v1.0a: DIG64_HCDPv10a_01.pdf] [v2.0: DIG64_PCDPv20.pdf]
>
>
> For DIG64_HCDPv10a_01.pdf and DIG64_PCDPv20.pdf (v10.a and v2.0 resp.),
>
>
>> + * Please see<http://www.dig64.org/specifications/>
>
>
> please see<http://www.dig64.org/specifications/>
>
>
>> *
>> * (c) Copyright 2002, 2004 Hewlett-Packard Development Company, L.P.
>> * Khalid Aziz<khalid.aziz at hp.com>
>> diff --git a/drivers/gpu/drm/README.drm b/drivers/gpu/drm/README.drm
>> index b5b3327..bf29068 100644
>> --- a/drivers/gpu/drm/README.drm
>> +++ b/drivers/gpu/drm/README.drm
>> @@ -28,7 +28,7 @@ ways:
>> Documentation on the DRI is available from:
>> http://dri.freedesktop.org/wiki/Documentation
>> http://sourceforge.net/project/showfiles.php?group_id=387
>> - http://dri.sourceforge.net/doc/
>> + http://dri.sourceforge.net/doc/DRIuserguide.html
>
>
> http://dri.freedesktop.org/wiki/Documentation
>
>
>>
>> For specific information about kernel-level support, see:
>>
>
>> diff --git a/drivers/input/mouse/touchkit_ps2.c b/drivers/input/mouse/touchkit_ps2.c
>> index 88121c5..e74753e 100644
>> --- a/drivers/input/mouse/touchkit_ps2.c
>> +++ b/drivers/input/mouse/touchkit_ps2.c
>> @@ -22,7 +22,7 @@
>> * Based upon touchkitusb.c
>> *
>> * Vendor documentation is available in support section of:
>> - * http://www.egalax.com.tw/
>> + * http://home.eeti.com.tw/web20/drivers/Software%20Programming%20Guide_v2.0.pdf
>
>
> The comment text needs to be fixed also.
>
>
>> */
>>
>> #include<linux/kernel.h>
>
>> diff --git a/drivers/media/dvb/frontends/mt312.c b/drivers/media/dvb/frontends/mt312.c
>> index 472907d..08023f1 100644
>> --- a/drivers/media/dvb/frontends/mt312.c
>> +++ b/drivers/media/dvb/frontends/mt312.c
>> @@ -20,8 +20,9 @@
>> Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
>>
>> References:
>> - http://products.zarlink.com/product_profiles/MT312.htm
>> - http://products.zarlink.com/product_profiles/SL1935.htm
>> + http://www.zarlink.com/zarlink/hs/71.htm
>> + http://www.chipcatalog.com/Zarlink/MT312.htm
>> + http://www.chipcatalog.com/Zarlink/SL1935.htm
>
>
> There's no need for links to chipcatalog.com. As I said in the previous
> review, we have search engines for finding datasheets. Besides, the old
> links are in the web archive (complete with PDFs) so there's no need to
> remove them.
>
>
>> */
>>
>> #include<linux/delay.h>
>> diff --git a/drivers/media/dvb/frontends/mt312.h b/drivers/media/dvb/frontends/mt312.h
>> index 29e3bb5..6d32e3f 100644
>> --- a/drivers/media/dvb/frontends/mt312.h
>> +++ b/drivers/media/dvb/frontends/mt312.h
>> @@ -19,8 +19,9 @@
>> Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
>>
>> References:
>> - http://products.zarlink.com/product_profiles/MT312.htm
>> - http://products.zarlink.com/product_profiles/SL1935.htm
>> + http://www.zarlink.com/zarlink/hs/71.htm
>> + http://www.chipcatalog.com/Zarlink/MT312.htm
>> + http://www.chipcatalog.com/Zarlink/SL1935.htm
>
>
> Same here.
>
>
>> */
>>
>> #ifndef MT312_H
>
>> --- a/drivers/media/video/gspca/gspca.c
>> +++ b/drivers/media/video/gspca/gspca.c
>> @@ -2338,7 +2338,7 @@ EXPORT_SYMBOL(gspca_resume);
>>
>> /* auto gain and exposure algorithm based on the knee algorithm described here:
>> http://ytse.tricolour.net/docs/LowLightOptimization.html
>> -
>> + http://81.209.78.62:8080/docs/LowLightOptimization.html
>
>
> This is in the web archive.
>
>
>> Returns 0 if no changes were made, 1 if the gain and or exposure settings
>> where changed. */
>> int gspca_auto_gain_n_exposure(struct gspca_dev *gspca_dev, int avg_lum,
>
>> index 701d942..142efd2 100644
>> --- a/drivers/mtd/maps/Kconfig
>> +++ b/drivers/mtd/maps/Kconfig
>> @@ -256,8 +256,7 @@ config MTD_DILNETPC
>> depends on X86&& MTD_CONCAT&& MTD_PARTITIONS&& MTD_CFI_INTELEXT&& BROKEN
>> help
>> MTD map driver for SSV DIL/Net PC Boards "DNP" and "ADNP".
>> - For details, see<http://www.ssv-embedded.de/ssv/pc104/p169.htm>
>> - and<http://www.ssv-embedded.de/ssv/pc104/p170.htm>
>> + For details, see<http://www.dilnetpc.com/>
>
>
> This is in the web archive. This removes information.
>
>
>>
>> config MTD_DILNETPC_BOOTSIZE
>> hex "Size of DIL/Net PC flash boot partition"
>
>> diff --git a/drivers/mtd/maps/dilnetpc.c b/drivers/mtd/maps/dilnetpc.c
>> index 0713e3a..114899b 100644
>> --- a/drivers/mtd/maps/dilnetpc.c
>> +++ b/drivers/mtd/maps/dilnetpc.c
>> @@ -19,8 +19,7 @@
>> * board: DNP/1486 and ADNP/1486. The DNP version has 2 megs of flash
>> * ROM (Intel 28F016S3) and 8 megs of DRAM, the ADNP version has 4 megs
>> * flash and 16 megs of RAM.
>> - * For details, see http://www.ssv-embedded.de/ssv/pc104/p169.htm
>> - * and http://www.ssv-embedded.de/ssv/pc104/p170.htm
>> + * For details, see http://www.dilnetpc.com/
>
>
> Same.
>
>
>> */
>>
>> #include<linux/module.h>
>
>> index 49aac70..f4523cd 100644
>> --- a/drivers/net/hamachi.c
>> +++ b/drivers/net/hamachi.c
>> @@ -20,9 +20,6 @@
>>
>> Support and updates available at
>> http://www.scyld.com/network/hamachi.html
>> - [link no longer provides useful info -jgarzik]
>> - or
>> - http://www.parl.clemson.edu/~keithu/hamachi.html
>
>
> Why?
>
>
>>
>> */
>>
>
>> index 6af6c83..0723c9f 100644
>> --- a/drivers/staging/comedi/drivers/daqboard2000.c
>> +++ b/drivers/staging/comedi/drivers/daqboard2000.c
>> @@ -51,7 +51,7 @@ Configuration options:
>> for the card, and here are the findings so far.
>>
>> 1. A good document that describes the PCI interface chip is found at:
>> - http://plx.plxtech.com/download/9080/databook/9080db-106.pdf
>> + [9080db-106.pdf] http://www.plxtech.com/products/io/pci9080
>
>
> Comments are supposed to be human readable text. Square brackets don't
> quote filenames by any convention I'm aware of (?)
> I'd suggest:
>
> A good document that describes the PCI interface chip is 9080db-106.pdf
> available from http://www.plxtech.com/products/io/pci9080
>
>
>>
>> 2. The initialization done so far is:
>> a. program the FPGA (windows code sans a lot of error messages)
>
>> diff --git a/drivers/video/vga16fb.c b/drivers/video/vga16fb.c
>> index 28ccab4..fc853a5 100644
>> --- a/drivers/video/vga16fb.c
>> +++ b/drivers/video/vga16fb.c
>> @@ -2,7 +2,7 @@
>> * linux/drivers/video/vga16.c -- VGA 16-color framebuffer driver
>> *
>> * Copyright 1999 Ben Pfaff<pfaffben at debian.org> and Petr Vandrovec<VANDROVE at vc.cvut.cz>
>> - * Based on VGA info at http://www.goodnet.com/~tinara/FreeVGA/home.htm
>> + * Based on VGA info at http://www.osdever.net/FreeVGA/home.htm
>
>
> The old link is in the web archive, you needn't remove it. Add the new one
> if you wish.
>
>
>> * Based on VESA framebuffer (c) 1998 Gerd Knorr<kraxel at goldbach.in-berlin.de>
>> *
>> * This file is subject to the terms and conditions of the GNU General
>> diff --git a/drivers/video/vgastate.c b/drivers/video/vgastate.c
>> index b91c466..f4043f8 100644
>> --- a/drivers/video/vgastate.c
>> +++ b/drivers/video/vgastate.c
>> @@ -5,7 +5,7 @@
>> *
>> * Copyright history from vga16fb.c:
>> * Copyright 1999 Ben Pfaff and Petr Vandrovec
>> - * Based on VGA info at http://www.goodnet.com/~tinara/FreeVGA/home.htm
>> + * Based on VGA info at http://www.osdever.net/FreeVGA/home.htm
>
>
> Same.
>
>
>> * Based on VESA framebuffer (c) 1998 Gerd Knorr
>> *
>> * This file is subject to the terms and conditions of the GNU General
>> diff --git a/include/linux/ixjuser.h b/include/linux/ixjuser.h
>> index 88b4589..39ef699 100644
>> --- a/include/linux/ixjuser.h
>> +++ b/include/linux/ixjuser.h
>> @@ -25,7 +25,7 @@
>> * Mike Preston,<mpreston at quicknet.net>
>> *
>> * More information about the hardware related to this driver can be found
>> - * at our website: http://www.quicknet.net
>> + * at our website: http://blemings.org/hugh/keyspan.html
>
>
> This appears to have been fat-fingered. No patch needed.
>
>
>> *
>> * Fixes:
>> *
>
>> diff --git a/include/video/vga.h b/include/video/vga.h
>> index b49a512..2b8691f 100644
>> --- a/include/video/vga.h
>> +++ b/include/video/vga.h
>> @@ -5,7 +5,7 @@
>> *
>> * Copyright history from vga16fb.c:
>> * Copyright 1999 Ben Pfaff and Petr Vandrovec
>> - * Based on VGA info at http://www.goodnet.com/~tinara/FreeVGA/home.htm
>> + * Based on VGA info at http://www.osdever.net/FreeVGA/home.htm
>
>
> See above.
>
> Thanks.
>
> Finn
>
alright.. I'll redu this... remove the brackets, and fix up the rest..
one note is:
http://dri.freedesktop.org/wiki/Documentation
this address is already there.. probably best to just leave the
sourceforge address and use the webarchive and/or if theirs a
proper address for the sourceforge dri..
Justin P. Mattock
More information about the dri-devel
mailing list