[PATCH 2/2] drm/radeon/kms: properly program vddci on evergreen+
Alex Deucher
alexdeucher at gmail.com
Tue Apr 12 11:49:24 PDT 2011
Change vddci as well as vddc when changing power modes
on evergreen/ni. Also, properly set vddci on boot up
for ni cards. The vbios only sets the limited clocks
and voltages on boot until the mc ucode is loaded. This
should fix stability problems on some btc cards.
Signed-off-by: Alex Deucher <alexdeucher at gmail.com>
---
drivers/gpu/drm/radeon/evergreen.c | 11 ++++++++---
drivers/gpu/drm/radeon/radeon.h | 10 +++++++---
drivers/gpu/drm/radeon/radeon_atombios.c | 20 ++++++++++++++------
drivers/gpu/drm/radeon/radeon_pm.c | 4 ++++
4 files changed, 33 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index f244817..3453910 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -120,11 +120,16 @@ void evergreen_pm_misc(struct radeon_device *rdev)
struct radeon_power_state *ps = &rdev->pm.power_state[req_ps_idx];
struct radeon_voltage *voltage = &ps->clock_info[req_cm_idx].voltage;
- if ((voltage->type == VOLTAGE_SW) && voltage->voltage) {
- if (voltage->voltage != rdev->pm.current_vddc) {
+ if (voltage->type == VOLTAGE_SW) {
+ if (voltage->voltage && (voltage->voltage != rdev->pm.current_vddc)) {
radeon_atom_set_voltage(rdev, voltage->voltage, SET_VOLTAGE_TYPE_ASIC_VDDC);
rdev->pm.current_vddc = voltage->voltage;
- DRM_DEBUG("Setting: v: %d\n", voltage->voltage);
+ DRM_DEBUG("Setting: vddc: %d\n", voltage->voltage);
+ }
+ if (voltage->vddci && (voltage->vddci != rdev->pm.current_vddci)) {
+ radeon_atom_set_voltage(rdev, voltage->vddci, SET_VOLTAGE_TYPE_ASIC_VDDCI);
+ rdev->pm.current_vddci = voltage->vddci;
+ DRM_DEBUG("Setting: vddci: %d\n", voltage->vddci);
}
}
}
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index 9955740..ba643b5 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -767,7 +767,9 @@ struct radeon_voltage {
u8 vddci_id; /* index into vddci voltage table */
bool vddci_enabled;
/* r6xx+ sw */
- u32 voltage;
+ u16 voltage;
+ /* evergreen+ vddci */
+ u16 vddci;
};
/* clock mode flags */
@@ -835,10 +837,12 @@ struct radeon_pm {
int default_power_state_index;
u32 current_sclk;
u32 current_mclk;
- u32 current_vddc;
+ u16 current_vddc;
+ u16 current_vddci;
u32 default_sclk;
u32 default_mclk;
- u32 default_vddc;
+ u16 default_vddc;
+ u16 default_vddci;
struct radeon_i2c_chan *i2c_bus;
/* selected pm method */
enum radeon_pm_method pm_method;
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 330a5b5..f5d12fb 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -2176,24 +2176,27 @@ static void radeon_atombios_add_pplib_thermal_controller(struct radeon_device *r
}
}
-static u16 radeon_atombios_get_default_vddc(struct radeon_device *rdev)
+static void radeon_atombios_get_default_voltages(struct radeon_device *rdev,
+ u16 *vddc, u16 *vddci)
{
struct radeon_mode_info *mode_info = &rdev->mode_info;
int index = GetIndexIntoMasterTable(DATA, FirmwareInfo);
u8 frev, crev;
u16 data_offset;
union firmware_info *firmware_info;
- u16 vddc = 0;
+
+ *vddc = 0;
+ *vddci = 0;
if (atom_parse_data_header(mode_info->atom_context, index, NULL,
&frev, &crev, &data_offset)) {
firmware_info =
(union firmware_info *)(mode_info->atom_context->bios +
data_offset);
- vddc = le16_to_cpu(firmware_info->info_14.usBootUpVDDCVoltage);
+ *vddc = le16_to_cpu(firmware_info->info_14.usBootUpVDDCVoltage);
+ if ((frev == 2) && (crev >= 2))
+ *vddci = le16_to_cpu(firmware_info->info_22.usBootUpVDDCIVoltage);
}
-
- return vddc;
}
static void radeon_atombios_parse_pplib_non_clock_info(struct radeon_device *rdev,
@@ -2203,7 +2206,9 @@ static void radeon_atombios_parse_pplib_non_clock_info(struct radeon_device *rde
int j;
u32 misc = le32_to_cpu(non_clock_info->ulCapsAndSettings);
u32 misc2 = le16_to_cpu(non_clock_info->usClassification);
- u16 vddc = radeon_atombios_get_default_vddc(rdev);
+ u16 vddc, vddci;
+
+ radeon_atombios_get_default_voltages(rdev, &vddc, &vddci);
rdev->pm.power_state[state_index].misc = misc;
rdev->pm.power_state[state_index].misc2 = misc2;
@@ -2244,6 +2249,7 @@ static void radeon_atombios_parse_pplib_non_clock_info(struct radeon_device *rde
rdev->pm.default_sclk = rdev->pm.power_state[state_index].clock_info[0].sclk;
rdev->pm.default_mclk = rdev->pm.power_state[state_index].clock_info[0].mclk;
rdev->pm.default_vddc = rdev->pm.power_state[state_index].clock_info[0].voltage.voltage;
+ rdev->pm.default_vddci = rdev->pm.power_state[state_index].clock_info[0].voltage.vddci;
} else {
/* patch the table values with the default slck/mclk from firmware info */
for (j = 0; j < mode_index; j++) {
@@ -2286,6 +2292,8 @@ static bool radeon_atombios_parse_pplib_clock_info(struct radeon_device *rdev,
VOLTAGE_SW;
rdev->pm.power_state[state_index].clock_info[mode_index].voltage.voltage =
le16_to_cpu(clock_info->evergreen.usVDDC);
+ rdev->pm.power_state[state_index].clock_info[mode_index].voltage.vddci =
+ le16_to_cpu(clock_info->evergreen.usVDDCI);
} else {
sclk = le16_to_cpu(clock_info->r600.usEngineClockLow);
sclk |= clock_info->r600.ucEngineClockHigh << 16;
diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c
index 4010571..86eda1e 100644
--- a/drivers/gpu/drm/radeon/radeon_pm.c
+++ b/drivers/gpu/drm/radeon/radeon_pm.c
@@ -538,6 +538,9 @@ void radeon_pm_resume(struct radeon_device *rdev)
if (rdev->pm.default_vddc)
radeon_atom_set_voltage(rdev, rdev->pm.default_vddc,
SET_VOLTAGE_TYPE_ASIC_VDDC);
+ if (rdev->pm.default_vddci)
+ radeon_atom_set_voltage(rdev, rdev->pm.default_vddci,
+ SET_VOLTAGE_TYPE_ASIC_VDDCI);
if (rdev->pm.default_sclk)
radeon_set_engine_clock(rdev, rdev->pm.default_sclk);
if (rdev->pm.default_mclk)
@@ -550,6 +553,7 @@ void radeon_pm_resume(struct radeon_device *rdev)
rdev->pm.current_sclk = rdev->pm.default_sclk;
rdev->pm.current_mclk = rdev->pm.default_mclk;
rdev->pm.current_vddc = rdev->pm.power_state[rdev->pm.default_power_state_index].clock_info[0].voltage.voltage;
+ rdev->pm.current_vddci = rdev->pm.power_state[rdev->pm.default_power_state_index].clock_info[0].voltage.vddci;
if (rdev->pm.pm_method == PM_METHOD_DYNPM
&& rdev->pm.dynpm_state == DYNPM_STATE_SUSPENDED) {
rdev->pm.dynpm_state = DYNPM_STATE_ACTIVE;
--
1.7.1.1
More information about the dri-devel
mailing list