[PATCH 3/4] drm/i915: Fix PCH port pipe select in CPT disable paths
Keith Packard
keithp at keithp.com
Sat Aug 6 10:54:07 PDT 2011
CPT pipe select is different from previous generations (using two bits
instead of one). All of the paths from intel_disable_pch_ports were
not making this distinction.
Mode setting with pipe A turned off would then also force all outputs
on pipe B to get turned off as the disable code would mistakenly
decide that all of these outputs were on pipe A and turn them off.
This is an extension of the CPT DP disable fix (why didn't I fix this then?)
Signed-off-by: Keith Packard <keithp at keithp.com>
---
drivers/gpu/drm/i915/i915_reg.h | 13 ++-----
drivers/gpu/drm/i915/intel_display.c | 60 ++++++++++++++++++++++++++++++---
2 files changed, 58 insertions(+), 15 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index d1331f7..5baaef4 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1318,6 +1318,7 @@
#define ADPA_PIPE_SELECT_MASK (1<<30)
#define ADPA_PIPE_A_SELECT 0
#define ADPA_PIPE_B_SELECT (1<<30)
+#define ADPA_PIPE_SELECT(pipe) ((pipe) << 30)
#define ADPA_USE_VGA_HVPOLARITY (1<<15)
#define ADPA_SETS_HVPOLARITY 0
#define ADPA_VSYNC_CNTL_DISABLE (1<<11)
@@ -1460,6 +1461,7 @@
/* Selects pipe B for LVDS data. Must be set on pre-965. */
#define LVDS_PIPEB_SELECT (1 << 30)
#define LVDS_PIPE_MASK (1 << 30)
+#define LVDS_PIPE(pipe) ((pipe) << 30)
/* LVDS dithering flag on 965/g4x platform */
#define LVDS_ENABLE_DITHER (1 << 25)
/* LVDS sync polarity flags. Set to invert (i.e. negative) */
@@ -1499,9 +1501,6 @@
#define LVDS_B0B3_POWER_DOWN (0 << 2)
#define LVDS_B0B3_POWER_UP (3 << 2)
-#define LVDS_PIPE_ENABLED(V, P) \
- (((V) & (LVDS_PIPE_MASK | LVDS_PORT_EN)) == ((P) << 30 | LVDS_PORT_EN))
-
/* Video Data Island Packet control */
#define VIDEO_DIP_DATA 0x61178
#define VIDEO_DIP_CTL 0x61170
@@ -3256,14 +3255,12 @@
#define ADPA_CRT_HOTPLUG_VOLREF_475MV (1<<17)
#define ADPA_CRT_HOTPLUG_FORCE_TRIGGER (1<<16)
-#define ADPA_PIPE_ENABLED(V, P) \
- (((V) & (ADPA_TRANS_SELECT_MASK | ADPA_DAC_ENABLE)) == ((P) << 30 | ADPA_DAC_ENABLE))
-
/* or SDVOB */
#define HDMIB 0xe1140
#define PORT_ENABLE (1 << 31)
#define TRANSCODER_A (0)
#define TRANSCODER_B (1 << 30)
+#define TRANSCODER(pipe) ((pipe) << 30)
#define TRANSCODER_MASK (1 << 30)
#define COLOR_FORMAT_8bpc (0)
#define COLOR_FORMAT_12bpc (3 << 26)
@@ -3280,9 +3277,6 @@
#define HSYNC_ACTIVE_HIGH (1 << 3)
#define PORT_DETECTED (1 << 2)
-#define HDMI_PIPE_ENABLED(V, P) \
- (((V) & (TRANSCODER_MASK | PORT_ENABLE)) == ((P) << 30 | PORT_ENABLE))
-
/* PCH SDVOB multiplex with HDMIB */
#define PCH_SDVOB HDMIB
@@ -3349,6 +3343,7 @@
#define PORT_TRANS_B_SEL_CPT (1<<29)
#define PORT_TRANS_C_SEL_CPT (2<<29)
#define PORT_TRANS_SEL_MASK (3<<29)
+#define PORT_TRANS_SEL_CPT(pipe) ((pipe) << 29)
#define TRANS_DP_CTL_A 0xe0300
#define TRANS_DP_CTL_B 0xe1300
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 35364e6..4c4c903 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -998,6 +998,53 @@ static bool dp_pipe_enabled(struct drm_i915_private *dev_priv, enum pipe pipe,
return true;
}
+static bool hdmi_pipe_enabled(struct drm_i915_private *dev_priv,
+ enum pipe pipe, u32 val)
+{
+ if ((val & PORT_ENABLE) == 0)
+ return false;
+
+ if (HAS_PCH_CPT(dev_priv->dev)) {
+ if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
+ return false;
+ } else {
+ if ((val & TRANSCODER_MASK) != TRANSCODER(pipe))
+ return false;
+ }
+ return true;
+}
+
+static bool lvds_pipe_enabled(struct drm_i915_private *dev_priv,
+ enum pipe pipe, u32 val)
+{
+ if ((val & LVDS_PORT_EN) == 0)
+ return false;
+
+ if (HAS_PCH_CPT(dev_priv->dev)) {
+ if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
+ return false;
+ } else {
+ if ((val & LVDS_PIPE_MASK) != LVDS_PIPE(pipe))
+ return false;
+ }
+ return true;
+}
+
+static bool adpa_pipe_enabled(struct drm_i915_private *dev_priv,
+ enum pipe pipe, u32 val)
+{
+ if ((val & ADPA_DAC_ENABLE) == 0)
+ return false;
+ if (HAS_PCH_CPT(dev_priv->dev)) {
+ if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
+ return false;
+ } else {
+ if ((val & ADPA_PIPE_SELECT_MASK) != ADPA_PIPE_SELECT(pipe))
+ return false;
+ }
+ return true;
+}
+
static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
enum pipe pipe, int reg, u32 port_sel)
{
@@ -1011,7 +1058,7 @@ static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
enum pipe pipe, int reg)
{
u32 val = I915_READ(reg);
- WARN(HDMI_PIPE_ENABLED(val, pipe),
+ WARN(hdmi_pipe_enabled(dev_priv, val, pipe),
"PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
reg, pipe_name(pipe));
}
@@ -1028,13 +1075,13 @@ static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
reg = PCH_ADPA;
val = I915_READ(reg);
- WARN(ADPA_PIPE_ENABLED(val, pipe),
+ WARN(adpa_pipe_enabled(dev_priv, val, pipe),
"PCH VGA enabled on transcoder %c, should be disabled\n",
pipe_name(pipe));
reg = PCH_LVDS;
val = I915_READ(reg);
- WARN(LVDS_PIPE_ENABLED(val, pipe),
+ WARN(lvds_pipe_enabled(dev_priv, val, pipe),
"PCH LVDS enabled on transcoder %c, should be disabled\n",
pipe_name(pipe));
@@ -1370,7 +1417,7 @@ static void disable_pch_hdmi(struct drm_i915_private *dev_priv,
enum pipe pipe, int reg)
{
u32 val = I915_READ(reg);
- if (HDMI_PIPE_ENABLED(val, pipe)) {
+ if (hdmi_pipe_enabled(dev_priv, val, pipe)) {
DRM_DEBUG_KMS("Disabling pch HDMI %x on pipe %d\n",
reg, pipe);
I915_WRITE(reg, val & ~PORT_ENABLE);
@@ -1392,12 +1439,13 @@ static void intel_disable_pch_ports(struct drm_i915_private *dev_priv,
reg = PCH_ADPA;
val = I915_READ(reg);
- if (ADPA_PIPE_ENABLED(val, pipe))
+ if (adpa_pipe_enabled(dev_priv, val, pipe))
I915_WRITE(reg, val & ~ADPA_DAC_ENABLE);
reg = PCH_LVDS;
val = I915_READ(reg);
- if (LVDS_PIPE_ENABLED(val, pipe)) {
+ if (lvds_pipe_enabled(dev_priv, val, pipe)) {
+ DRM_DEBUG_KMS("disable lvds on pipe %d val 0x%08x\n", pipe, val);
I915_WRITE(reg, val & ~LVDS_PORT_EN);
POSTING_READ(reg);
udelay(100);
--
1.7.5.4
More information about the dri-devel
mailing list