[PULL] remove drm_sman and some i815 fixes
James Simmons
jsimmons at infradead.org
Fri Dec 23 07:36:25 PST 2011
> > > > Last attempt at your branch still had problem. Start I didn't have time
> > > > track down the exact issue. I'm cloning the below branch and will test it.
> > > > Thanks for cleanup.
> > >
> > > Jakob Bornecrantz quickly tested my attempt at fixing the deadlock you've
> > > reported and noticed that the X server fails to start up (and that the
> > > kernel hangs). Is that the same you're seeing?
> >
> > What was just merged to drm-next works fine. Its the reclaim buffer
> > patches that cause the problem. In my case the X server starts but I get
> > a blank screen. I have full debug on so this is what happens.
>
> Thanks for testing and gathering the logs.
>
> Judging from the dmesg you've attached the via driver opens and closes the
> via drm node at least twice while starting X. Which explains why things
> blow up for you and Jakob already at startup. But ...
> Can you please retest with that and again grab the dmesg with full
> logging? Jakob reported that this still blows up, so there's a problem
> left somewhere. But I've rechecked the patches and couldn't see it.
Done. Using your latest branch.
Initializing cgroup subsys cpu
Linux version 3.2.0-rc6-openchrome+ (jsimmons at debian) (gcc version 4.6.2 (Debian 4.6.2-7) ) #42 SMP Fri Dec 23 10:16:38 EST 2011
Command line: BOOT_IMAGE=/boot/vmlinuz-test root=UUID=2539cb3b-47b9-47fc-81c1-97dabc51b2b2 ro drm.debug=255
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007bef0000 (usable)
BIOS-e820: 000000007bef0000 - 000000007bef3000 (ACPI NVS)
BIOS-e820: 000000007bef3000 - 000000007bf00000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.3 present.
DMI: MICRO-STAR INTERNATIONAL CO., LTD MS-7312/MS-7312, BIOS V1.2 01/25/2007
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
AGP bridge at 00:00:00
Aperture from AGP @ e8000000 old size 32 MB
Aperture from AGP @ e8000000 size 128 MB (APSIZE f20)
last_pfn = 0x7bef0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-CBFFF uncachable
CC000-D3FFF write-back
D4000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 0000000000 mask FFC0000000 write-back
1 base 0040000000 mask FFE0000000 write-back
2 base 0060000000 mask FFF0000000 write-back
3 base 0070000000 mask FFF8000000 write-back
4 base 0078000000 mask FFFC000000 write-back
5 base 007BF00000 mask FFFFF00000 uncachable
6 base 00E8000000 mask FFF8000000 write-combining
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000009d000] 9d000 size 8192
init_memory_mapping: 0000000000000000-000000007bef0000
0000000000 - 007be00000 page 2M
007be00000 - 007bef0000 page 4k
kernel direct mapping tables up to 7bef0000 @ 1fffc000-20000000
RAMDISK: 37aba000 - 37d55000
ACPI: RSDP 00000000000f78c0 00014 (v00 VIAK8M)
ACPI: RSDT 000000007bef3040 0002C (v01 VIAK8M AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 000000007bef30c0 00074 (v01 VIAK8M AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 000000007bef3180 05396 (v01 VIAK8M AWRDACPI 00001000 MSFT 0100000E)
ACPI: FACS 000000007bef0000 00040
ACPI: APIC 000000007bef8580 00068 (v01 VIAK8M AWRDACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880079600000-ffff88007b1fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007bef0
On node 0 totalpages: 507519
DMA zone: 56 pages used for memmap
DMA zone: 2 pages reserved
DMA zone: 3925 pages, LIFO batch:0
DMA32 zone: 6885 pages used for memmap
DMA32 zone: 496651 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
Allocating PCI resources starting at 7bf00000 (gap: 7bf00000:82d00000)
setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 25 pages/cpu @ffff88007bc00000 s70592 r8192 d23616 u1048576
pcpu-alloc: s70592 r8192 d23616 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 500576
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-test root=UUID=2539cb3b-47b9-47fc-81c1-97dabc51b2b2 ro drm.debug=255
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
AGP bridge at 00:00:00
Aperture from AGP @ e8000000 old size 32 MB
Aperture from AGP @ e8000000 size 128 MB (APSIZE f20)
Node 0: aperture @ e8000000 size 128 MB
Memory: 1990112k/2030528k available (2926k kernel code, 452k absent, 39964k reserved, 1417k data, 424k init)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:4352 nr_irqs:512 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 2399.681 MHz processor.
Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.36 BogoMIPS (lpj=9598724)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 256
tseg: 007bf00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
using AMD E400 aware idle routine
ACPI: Core revision 20110623
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
Booting Node 0, Processors #1 Ok.
smpboot cpu 1: start_ip = 9d000
Brought up 2 CPUs
Total of 2 processors activated (9599.52 BogoMIPS).
NET: Registered protocol family 16
node 0 link 0: io port [1000, fffff]
TOM: 0000000080000000 aka 2048M
node 0 link 0: mmio [80000000, efffffff]
node 0 link 0: mmio [f0000000, f3ffffff]
node 0 link 0: mmio [f4000000, f4ffffff]
node 0 link 0: mmio [f5000000, ff70ffff]
node 0 link 0: mmio [a0000, bffff]
bus: [00, ff] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0x80000000-0xfcffffffff]
bus: 00 index 2 [mem 0x000a0000-0x000bffff]
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
pci 0000:00:00.0: [1106:0204] type 0 class 0x000600
pci 0000:00:00.0: reg 10: [mem 0xe8000000-0xefffffff pref]
pci 0000:00:00.1: [1106:1204] type 0 class 0x000600
pci 0000:00:00.2: [1106:2204] type 0 class 0x000600
pci 0000:00:00.3: [1106:3204] type 0 class 0x000600
pci 0000:00:00.4: [1106:4204] type 0 class 0x000600
pci 0000:00:00.7: [1106:7204] type 0 class 0x000600
pci 0000:00:01.0: [1106:b188] type 1 class 0x000604
pci 0000:00:01.0: supports D1
pci 0000:00:0a.0: [1102:0002] type 0 class 0x000401
pci 0000:00:0a.0: reg 10: [io 0xe300-0xe31f]
pci 0000:00:0a.0: supports D1 D2
pci 0000:00:0a.1: [1102:7002] type 0 class 0x000980
pci 0000:00:0a.1: reg 10: [io 0xe900-0xe907]
pci 0000:00:0a.1: supports D1 D2
pci 0000:00:0f.0: [1106:3149] type 0 class 0x000101
pci 0000:00:0f.0: reg 10: [io 0xea00-0xea07]
pci 0000:00:0f.0: reg 14: [io 0xeb00-0xeb03]
pci 0000:00:0f.0: reg 18: [io 0xe000-0xe007]
pci 0000:00:0f.0: reg 1c: [io 0xe100-0xe103]
pci 0000:00:0f.0: reg 20: [io 0xe200-0xe20f]
pci 0000:00:0f.0: reg 24: [io 0xd000-0xd0ff]
pci 0000:00:0f.1: [1106:0571] type 0 class 0x000101
pci 0000:00:0f.1: reg 20: [io 0xe400-0xe40f]
pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
pci 0000:00:10.0: reg 20: [io 0xe500-0xe51f]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
pci 0000:00:10.1: reg 20: [io 0xe600-0xe61f]
pci 0000:00:10.1: supports D1 D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03
pci 0000:00:10.2: reg 20: [io 0xe700-0xe71f]
pci 0000:00:10.2: supports D1 D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: PME# disabled
pci 0000:00:10.3: [1106:3038] type 0 class 0x000c03
pci 0000:00:10.3: reg 20: [io 0xe800-0xe81f]
pci 0000:00:10.3: supports D1 D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: PME# disabled
pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03
pci 0000:00:10.4: reg 10: [mem 0xf6000000-0xf60000ff]
pci 0000:00:10.4: supports D1 D2
pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.4: PME# disabled
pci 0000:00:11.0: [1106:3227] type 0 class 0x000601
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:11.5: [1106:3059] type 0 class 0x000401
pci 0000:00:11.5: reg 10: [io 0xd400-0xd4ff]
pci 0000:00:11.5: supports D1 D2
pci 0000:00:12.0: [1106:3065] type 0 class 0x000200
pci 0000:00:12.0: reg 10: [io 0xdc00-0xdcff]
pci 0000:00:12.0: reg 14: [mem 0xf6001000-0xf60010ff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: PME# disabled
pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
PCI: peer root bus 00 res updated from pci conf
pci 0000:01:00.0: [1106:3108] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf3ffffff pref]
pci 0000:01:00.0: reg 14: [mem 0xf4000000-0xf4ffffff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf5ffffff]
pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf3ffffff pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: address space collision: [mem 0xe8000000-0xefffffff pref] conflicts with GART [mem 0xe8000000-0xefffffff]
reserve RAM buffer: 000000000009f400 - 000000000009ffff
reserve RAM buffer: 000000007bef0000 - 000000007bffffff
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0x000f0000-0x000fffff]
pnp 00:00: [mem 0x7bf00000-0x7bffffff]
pnp 00:00: [mem 0x7bef0000-0x7befffff]
pnp 00:00: [mem 0xffff0000-0xffffffff]
pnp 00:00: [mem 0x00000000-0x0009ffff]
pnp 00:00: [mem 0x00100000-0x7beeffff]
pnp 00:00: [mem 0x7c000000-0x7fffffff]
pnp 00:00: [mem 0xfec00000-0xfec00fff]
pnp 00:00: [mem 0xfee00000-0xfee00fff]
pnp 00:00: [mem 0xfff80000-0xfffeffff]
pnp 00:00: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
pnp 00:00: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
pnp 00:00: disabling [mem 0x00100000-0x7beeffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref]
system 00:00: [mem 0x7bf00000-0x7bffffff] could not be reserved
system 00:00: [mem 0x7bef0000-0x7befffff] could not be reserved
system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
system 00:00: [mem 0x7c000000-0x7fffffff] has been reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: [mem 0xfff80000-0xfffeffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [bus 00-ff]
pnp 00:01: [io 0x0cf8-0x0cff]
pnp 00:01: [io 0x0000-0x0cf7 window]
pnp 00:01: [io 0x0d00-0xffff window]
pnp 00:01: [mem 0x000a0000-0x000bffff window]
pnp 00:01: [mem 0x000c0000-0x000dffff window]
pnp 00:01: [mem 0x80000000-0xfebfffff window]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:02: [io 0x4000-0x407f]
pnp 00:02: [io 0x5000-0x500f]
system 00:02: [io 0x4000-0x407f] has been reserved
system 00:02: [io 0x5000-0x500f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [io 0x0010-0x001f]
pnp 00:03: [io 0x0022-0x003f]
pnp 00:03: [io 0x0044-0x005f]
pnp 00:03: [io 0x0062-0x0063]
pnp 00:03: [io 0x0065-0x006f]
pnp 00:03: [io 0x0074-0x007f]
pnp 00:03: [io 0x0091-0x0093]
pnp 00:03: [io 0x00a2-0x00bf]
pnp 00:03: [io 0x00e0-0x00ef]
pnp 00:03: [io 0x04d0-0x04d1]
pnp 00:03: [io 0x0290-0x0297]
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: [io 0x0290-0x0297] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 4]
pnp 00:04: [io 0x0000-0x000f]
pnp 00:04: [io 0x0080-0x0090]
pnp 00:04: [io 0x0094-0x009f]
pnp 00:04: [io 0x00c0-0x00df]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io 0x0070-0x0073]
pnp 00:05: [irq 8]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io 0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [io 0x03f0-0x03f5]
pnp 00:08: [io 0x03f7]
pnp 00:08: [irq 6]
pnp 00:08: [dma 2]
pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:09: [io 0x03f8-0x03ff]
pnp 00:09: [irq 4]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: [io 0x02f8-0x02ff]
pnp 00:0a: [irq 3]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0b: [io 0x0378-0x037f]
pnp 00:0b: [io 0x0778-0x077b]
pnp 00:0b: [irq 7]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:0c: [io 0x0060]
pnp 00:0c: [io 0x0064]
pnp 00:0c: [irq 1]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
Switching to clocksource acpi_pm
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:01:00.0: BAR 6: assigned [mem 0xf5000000-0xf500ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf5ffffff]
pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf3ffffff pref]
pci 0000:00:01.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x80000000-0xfcffffffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf5ffffff]
pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf3ffffff pref]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: MSI quirk detected; MSI disabled
pci 0000:00:01.0: disabling DAC on VIA PCI bridge
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 2668k freed
agpgart-amd64 0000:00:00.0: AGP bridge [1106/0204]
agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
audit: initializing netlink socket (disabled)
type=2000 audit(1324653784.264:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
msgmni has been set to 3892
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN] (on)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
ERST: Table is not found!
GHES: HEST is not enabled!
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Linux agpgart interface v0.103
Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using getrawmonotonic().
[drm] Initialized drm 1.1.0 20060810
sata_via 0000:00:0f.0: version 2.6
ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
sata_via 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
sata_via 0000:00:0f.0: routed to hard irq line 11
scsi0 : sata_via
scsi1 : sata_via
ata1: SATA max UDMA/133 cmd 0xea00 ctl 0xeb00 bmdma 0xe200 irq 20
ata2: SATA max UDMA/133 cmd 0xe000 ctl 0xe100 bmdma 0xe208 irq 20
pata_via 0000:00:0f.1: version 0.3.4
pata_via 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
scsi2 : pata_via
scsi3 : pata_via
ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe400 irq 14
ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe408 irq 15
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
via-rhine 0000:00:12.0: PCI INT A -> Link[ALKD] -> GSI 23 (level, low) -> IRQ 23
via-rhine 0000:00:12.0: eth0: VIA Rhine II at 0xf6001000, 00:19:db:ab:85:68, IRQ 23
via-rhine 0000:00:12.0: eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
ehci_hcd 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: irq 21, io mem 0xf6000000
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e500
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e600
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e700
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e800
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
md: raid10 personality registered for level 10
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel at redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
registered taskstats version 1
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
ata3.00: ATAPI: SAMSUNG DVD-ROM SD-616, F000DEL, max UDMA/33
ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
ata3.01: ATA-7: ST3120814A, 3.AAJ, max UDMA/100
ata3.01: 234441648 sectors, multi 16: LBA48
ata3.00: configured for UDMA/33
ata3.01: configured for UDMA/100
ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
scsi 2:0:0:0: CD-ROM SAMSUNG DVD-ROM SD-616 F000 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg0 type 5
scsi 2:0:1:0: Direct-Access ATA ST3120814A 3.AA PQ: 0 ANSI: 5
sd 2:0:1:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 2:0:1:0: Attached scsi generic sg1 type 0
sd 2:0:1:0: [sda] Write Protect is off
sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 2:0:1:0: [sda] Attached SCSI disk
usb 5-2: new low-speed USB device number 2 using uhci_hcd
Freeing unused kernel memory: 424k freed
input: Cypress Sem PS2/USB Browser Combo Mouse as /devices/pci0000:00/0000:00:10.3/usb5/5-2/5-2:1.0/input/input3
generic-usb 0003:05FE:0011.0001: input,hidraw0: USB HID v1.00 Mouse [Cypress Sem PS2/USB Browser Combo Mouse] on usb-0000:00:10.3-2/input0
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): mounted filesystem with writeback data mode
udevd[740]: starting version 175
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
parport_pc 00:0b: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP]
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram
gameport gameport0: EMU10K1 is pci0000:00:0a.1/gameport0, io 0xe900, speed 1185kHz
snd_emu10k1 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
snd_via82xx 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
snd_via82xx 0000:00:11.5: setting latency timer to 64
Adding 2249064k swap on /dev/sda5. Priority:-1 extents:1 across:2249064k
EXT3-fs (sda1): using internal journal
loop: module loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
via-rhine 0000:00:12.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
DECnet: Routing cache hash table of 1024 buckets, 16Kbytes
NET: Registered protocol family 12
[drm:drm_pci_init],
[drm:drm_get_pci_dev],
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[drm:drm_get_minor],
[drm:drm_get_minor], new minor assigned 0
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0
[drm:drm_stub_open],
[drm:drm_open_helper], pid = 1802, minor = 0
[drm:via_driver_open],
[drm:drm_setup],
[drm:drm_ioctl], pid=1802, cmd=0xc0106407, nr=0x07, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0xc0106401, nr=0x01, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0xc0106401, nr=0x01, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1
[drm:drm_release], open_count = 1
[drm:drm_release], pid = 1802, device = 0xe200, open_count = 1
[drm:drm_lastclose],
[drm:drm_lastclose], driver lastclose completed
[drm:drm_lastclose], lastclose completed
[drm:drm_stub_open],
[drm:drm_open_helper], pid = 1802, minor = 0
[drm:via_driver_open],
[drm:drm_setup],
[drm:drm_ioctl], pid=1802, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1
[drm:drm_release], open_count = 1
[drm:drm_release], pid = 1802, device = 0xe200, open_count = 1
[drm:drm_lastclose],
[drm:drm_lastclose], driver lastclose completed
[drm:drm_lastclose], lastclose completed
[drm:drm_stub_open],
[drm:drm_open_helper], pid = 1802, minor = 0
[drm:via_driver_open],
[drm:drm_setup],
[drm:drm_ioctl], pid=1802, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1
[drm:drm_release], open_count = 1
[drm:drm_release], pid = 1802, device = 0xe200, open_count = 1
[drm:drm_lastclose],
[drm:drm_lastclose], driver lastclose completed
[drm:drm_lastclose], lastclose completed
[drm:drm_stub_open],
[drm:drm_open_helper], pid = 1802, minor = 0
[drm:via_driver_open],
[drm:drm_setup],
[drm:drm_ioctl], pid=1802, cmd=0xc0106407, nr=0x07, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0xc0106401, nr=0x01, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0xc0106401, nr=0x01, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0xc0106407, nr=0x07, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0xc0286415, nr=0x15, dev 0xe200, auth=1
[drm:drm_addmap_core], offset = 0x00000000, size = 0x00002000, type = 2
[drm:drm_addmap_core], 8192 13 ffffc9000050a000
[drm:drm_mmap_locked], start = 0x7f93d2907000, end = 0x7f93d2909000, page offset = 0x2b7ff
[drm:drm_vm_open_locked], 0x7f93d2907000,0x00002000
[drm:drm_do_vm_shm_fault], shm_fault 0x0
[drm:drm_do_vm_shm_fault], shm_fault 0x1000
[drm:drm_ioctl], pid=1802, cmd=0xc0286415, nr=0x15, dev 0xe200, auth=1
[drm:drm_addmap_core], offset = 0xf0000000, size = 0x04000000, type = 0
[drm:drm_ioctl], pid=1802, cmd=0xc0106426, nr=0x26, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0xc0106426, nr=0x26, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0xc0086420, nr=0x20, dev 0xe200, auth=1
[drm:drm_addctx], 1
[drm:drm_ioctl], pid=1802, cmd=0x40086422, nr=0x22, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0x4008642a, nr=0x2a, dev 0xe200, auth=1
[drm:drm_lock], 1 (pid 1802) requests lock (0x00000000), flags = 0x00000000
[drm:drm_lock], 1 has lock
[drm:drm_fasync], fd = 9, device = 0xe200
[drm:drm_ioctl], pid=1802, cmd=0xc0286415, nr=0x15, dev 0xe200, auth=1
[drm:drm_addmap_core], offset = 0xf4000000, size = 0x0000d000, type = 1
[drm:drm_ioctl], pid=1802, cmd=0xc0286415, nr=0x15, dev 0xe200, auth=1
[drm:drm_addmap_core], offset = 0xf0000000, size = 0x04000000, type = 0
[drm:drm_ioctl], pid=1802, cmd=0x6430, nr=0x30, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0x80386433, nr=0x33, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0x80386433, nr=0x33, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0x80386433, nr=0x33, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0x40086432, nr=0x32, dev 0xe200, auth=1
agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
pci 0000:01:00.0: putting AGP V3 device into 8x mode
[drm:drm_ioctl], pid=1802, cmd=0xc0206434, nr=0x34, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0x40106436, nr=0x36, dev 0xe200, auth=1
[drm:drm_agp_bind], base = 0xe8000000 entry->bound = 0xe8000000
[drm:drm_ioctl], pid=1802, cmd=0x80386433, nr=0x33, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0x40086442, nr=0x42, dev 0xe200, auth=1
[drm:via_agp_init], offset = 0, size = 31457280
[drm:drm_ioctl], pid=1802, cmd=0xc0286415, nr=0x15, dev 0xe200, auth=1
[drm:drm_addmap_core], offset = 0x00000000, size = 0x01e00000, type = 3
[drm:drm_addmap_core], AGP offset = 0xe8000000, size = 0x01e00000
[drm:drm_mmap_locked], start = 0x7f93c7a72000, end = 0x7f93c9872000, page offset = 0xe8000
[drm:drm_mmap_locked], Type = 3; start = 0x7f93c7a72000, end = 0x7f93c9872000, offset = 0xe8000000
[drm:drm_vm_open_locked], 0x7f93c7a72000,0x01e00000
[drm:drm_ioctl], pid=1802, cmd=0x40086443, nr=0x43, dev 0xe200, auth=1
[drm:via_fb_init], offset = 0, size = 67108864
[drm:drm_ioctl], pid=1802, cmd=0x40286444, nr=0x44, dev 0xe200, auth=1
[drm:via_map_init],
[drm:via_do_init_map],
[drm:via_init_futex],
[drm:drm_ioctl], pid=1802, cmd=0xc0206440, nr=0x40, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0xc0206440, nr=0x40, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0xc0206440, nr=0x40, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0xc0206440, nr=0x40, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0xc0206440, nr=0x40, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0xc0206440, nr=0x40, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0x40206447, nr=0x47, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0xc0206440, nr=0x40, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0xc0206440, nr=0x40, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0xc0286415, nr=0x15, dev 0xe200, auth=1
[drm:drm_addmap_core], offset = 0xf0000000, size = 0x04000000, type = 0
[drm:drm_stub_open],
[drm:drm_open_helper], pid = 1802, minor = 0
[drm:via_driver_open],
[drm:drm_ioctl], pid=1802, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1
[drm:drm_release], open_count = 2
[drm:drm_release], pid = 1802, device = 0xe200, open_count = 2
[drm:drm_stub_open],
[drm:drm_open_helper], pid = 1802, minor = 0
[drm:via_driver_open],
[drm:drm_ioctl], pid=1802, cmd=0xc0106407, nr=0x07, dev 0xe200, auth=1
[drm:drm_ioctl], ret = fffffff3
[drm:drm_ioctl], pid=1802, cmd=0xc0106407, nr=0x07, dev 0xe200, auth=1
[drm:drm_ioctl], ret = fffffff3
[drm:drm_ioctl], pid=1802, cmd=0xc0106401, nr=0x01, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0xc0106401, nr=0x01, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0x80046402, nr=0x02, dev 0xe200, auth=1
[drm:drm_add_magic], 1
[drm:drm_getmagic], 1
[drm:drm_ioctl], pid=1802, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0x40046411, nr=0x11, dev 0xe200, auth=1
[drm:drm_authmagic], 1
[drm:drm_remove_magic], 1
[drm:drm_mmap_locked], start = 0x7f93c2fde000, end = 0x7f93c6fde000, page offset = 0xf0000
[drm:drm_mmap_locked], Type = 0; start = 0x7f93c2fde000, end = 0x7f93c6fde000, offset = 0xf0000000
[drm:drm_vm_open_locked], 0x7f93c2fde000,0x04000000
[drm:drm_mmap_locked], start = 0x7f93d2905000, end = 0x7f93d2907000, page offset = 0x2b7ff
[drm:drm_vm_open_locked], 0x7f93d2905000,0x00002000
[drm:drm_vm_shm_close], 0x7f93d2905000,0x00002000
[drm:drm_vm_close_locked], 0x7f93c2fde000,0x04000000
[drm:drm_release], open_count = 2
[drm:drm_release], pid = 1802, device = 0xe200, open_count = 2
[drm:drm_vm_open_locked], 0x7f93c7a72000,0x01e00000
[drm:drm_vm_open_locked], 0x7f93d2907000,0x00002000
[drm:drm_vm_close_locked], 0x7f93c7a72000,0x01e00000
[drm:drm_vm_shm_close], 0x7f93d2907000,0x00002000
[drm:drm_vm_open_locked], 0x7f93c7a72000,0x01e00000
[drm:drm_vm_open_locked], 0x7f93d2907000,0x00002000
[drm:drm_vm_close_locked], 0x7f93c7a72000,0x01e00000
[drm:drm_vm_shm_close], 0x7f93d2907000,0x00002000
[drm:drm_ioctl], pid=1802, cmd=0x4008642b, nr=0x2b, dev 0xe200, auth=1
[drm:drm_ioctl], pid=1802, cmd=0x4008642a, nr=0x2a, dev 0xe200, auth=1
[drm:drm_lock], 1 (pid 1802) requests lock (0x80000000), flags = 0x00000000
More information about the dri-devel
mailing list