[PATCH] drm, drm/i915/lvds: Honour video= parameter to override LVDS fixed mode
Chris Wilson
chris at chris-wilson.co.uk
Wed Feb 9 07:01:48 PST 2011
The LVDS code ignores any connector for which it cannot find a fixed
mode (through an EDID, vBIOS tables or the current active mode). Some
platforms may include an LVDS header on the board and this may then be
partnered with a panel without an EDID. This results in us ignoring the
connector and not lighting up the panel.
Under UMS, it was possible to override this by specifying the mode
through the Xorg.conf. For KMS, one specifies the modeline through the
video= parameter. So we need to include this user modeline when checking
for panel fixed modes.
The machinery to parse the video= modes and generate the appropriate
drm_mode is already built into drm_fb_herlper and so we can just
extract, move it to the core and also use it from intel_lvds.c
Reported-by: Oliver Seitz <info at vtnd.de>
Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
Cc: Dave Airlie <airlied at redhat.com>
---
drivers/gpu/drm/drm_fb_helper.c | 207 +++++++------------------------------
drivers/gpu/drm/drm_modes.c | 154 +++++++++++++++++++++++++++
drivers/gpu/drm/i915/intel_lvds.c | 17 +++
include/drm/drmP.h | 25 +++++
include/drm/drm_fb_helper.h | 16 +---
5 files changed, 233 insertions(+), 186 deletions(-)
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index 6977a1c..5a80412 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -70,174 +70,50 @@ fail:
}
EXPORT_SYMBOL(drm_fb_helper_single_add_all_connectors);
-/**
- * drm_fb_helper_connector_parse_command_line - parse command line for connector
- * @connector - connector to parse line for
- * @mode_option - per connector mode option
- *
- * This parses the connector specific then generic command lines for
- * modes and options to configure the connector.
- *
- * This uses the same parameters as the fb modedb.c, except for extra
- * <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]
- *
- * enable/enable Digital/disable bit at the end
- */
-static bool drm_fb_helper_connector_parse_command_line(struct drm_fb_helper_connector *fb_helper_conn,
- const char *mode_option)
-{
- const char *name;
- unsigned int namelen;
- int res_specified = 0, bpp_specified = 0, refresh_specified = 0;
- unsigned int xres = 0, yres = 0, bpp = 32, refresh = 0;
- int yres_specified = 0, cvt = 0, rb = 0, interlace = 0, margins = 0;
- int i;
- enum drm_connector_force force = DRM_FORCE_UNSPECIFIED;
- struct drm_fb_helper_cmdline_mode *cmdline_mode;
- struct drm_connector *connector;
-
- if (!fb_helper_conn)
- return false;
- connector = fb_helper_conn->connector;
-
- cmdline_mode = &fb_helper_conn->cmdline_mode;
- if (!mode_option)
- mode_option = fb_mode_option;
-
- if (!mode_option) {
- cmdline_mode->specified = false;
- return false;
- }
-
- name = mode_option;
- namelen = strlen(name);
- for (i = namelen-1; i >= 0; i--) {
- switch (name[i]) {
- case '@':
- namelen = i;
- if (!refresh_specified && !bpp_specified &&
- !yres_specified) {
- refresh = simple_strtol(&name[i+1], NULL, 10);
- refresh_specified = 1;
- if (cvt || rb)
- cvt = 0;
- } else
- goto done;
- break;
- case '-':
- namelen = i;
- if (!bpp_specified && !yres_specified) {
- bpp = simple_strtol(&name[i+1], NULL, 10);
- bpp_specified = 1;
- if (cvt || rb)
- cvt = 0;
- } else
- goto done;
- break;
- case 'x':
- if (!yres_specified) {
- yres = simple_strtol(&name[i+1], NULL, 10);
- yres_specified = 1;
- } else
- goto done;
- case '0' ... '9':
- break;
- case 'M':
- if (!yres_specified)
- cvt = 1;
- break;
- case 'R':
- if (cvt)
- rb = 1;
- break;
- case 'm':
- if (!cvt)
- margins = 1;
- break;
- case 'i':
- if (!cvt)
- interlace = 1;
- break;
- case 'e':
- force = DRM_FORCE_ON;
- break;
- case 'D':
- if ((connector->connector_type != DRM_MODE_CONNECTOR_DVII) &&
- (connector->connector_type != DRM_MODE_CONNECTOR_HDMIB))
- force = DRM_FORCE_ON;
- else
- force = DRM_FORCE_ON_DIGITAL;
- break;
- case 'd':
- force = DRM_FORCE_OFF;
- break;
- default:
- goto done;
- }
- }
- if (i < 0 && yres_specified) {
- xres = simple_strtol(name, NULL, 10);
- res_specified = 1;
- }
-done:
-
- DRM_DEBUG_KMS("cmdline mode for connector %s %dx%d@%dHz%s%s%s\n",
- drm_get_connector_name(connector), xres, yres,
- (refresh) ? refresh : 60, (rb) ? " reduced blanking" :
- "", (margins) ? " with margins" : "", (interlace) ?
- " interlaced" : "");
-
- if (force) {
- const char *s;
- switch (force) {
- case DRM_FORCE_OFF: s = "OFF"; break;
- case DRM_FORCE_ON_DIGITAL: s = "ON - dig"; break;
- default:
- case DRM_FORCE_ON: s = "ON"; break;
- }
-
- DRM_INFO("forcing %s connector %s\n",
- drm_get_connector_name(connector), s);
- connector->force = force;
- }
-
- if (res_specified) {
- cmdline_mode->specified = true;
- cmdline_mode->xres = xres;
- cmdline_mode->yres = yres;
- }
-
- if (refresh_specified) {
- cmdline_mode->refresh_specified = true;
- cmdline_mode->refresh = refresh;
- }
-
- if (bpp_specified) {
- cmdline_mode->bpp_specified = true;
- cmdline_mode->bpp = bpp;
- }
- cmdline_mode->rb = rb ? true : false;
- cmdline_mode->cvt = cvt ? true : false;
- cmdline_mode->interlace = interlace ? true : false;
-
- return true;
-}
-
static int drm_fb_helper_parse_command_line(struct drm_fb_helper *fb_helper)
{
struct drm_fb_helper_connector *fb_helper_conn;
int i;
for (i = 0; i < fb_helper->connector_count; i++) {
+ struct drm_cmdline_mode *mode;
+ struct drm_connector *connector;
char *option = NULL;
fb_helper_conn = fb_helper->connector_info[i];
+ connector = fb_helper_conn->connector;
+ mode = &fb_helper_conn->cmdline_mode;
/* do something on return - turn off connector maybe */
- if (fb_get_options(drm_get_connector_name(fb_helper_conn->connector), &option))
+ if (fb_get_options(drm_get_connector_name(connector), &option))
continue;
- drm_fb_helper_connector_parse_command_line(fb_helper_conn, option);
+ if (drm_mode_parse_command_line_for_connector(option,
+ connector,
+ mode)) {
+ if (mode->force) {
+ const char *s;
+ switch (mode->force) {
+ case DRM_FORCE_OFF: s = "OFF"; break;
+ case DRM_FORCE_ON_DIGITAL: s = "ON - dig"; break;
+ default:
+ case DRM_FORCE_ON: s = "ON"; break;
+ }
+
+ DRM_INFO("forcing %s connector %s\n",
+ drm_get_connector_name(connector), s);
+ connector->force = mode->force;
+ }
+
+ DRM_DEBUG_KMS("cmdline mode for connector %s %dx%d@%dHz%s%s%s\n",
+ drm_get_connector_name(connector),
+ mode->xres, mode->yres,
+ mode->refresh_specified ? mode->refresh : 60,
+ mode->rb ? " reduced blanking" : "",
+ mode->margins ? " with margins" : "",
+ mode->interlace ? " interlaced" : "");
+ }
+
}
return 0;
}
@@ -883,7 +759,7 @@ int drm_fb_helper_single_fb_probe(struct drm_fb_helper *fb_helper,
/* first up get a count of crtcs now in use and new min/maxes width/heights */
for (i = 0; i < fb_helper->connector_count; i++) {
struct drm_fb_helper_connector *fb_helper_conn = fb_helper->connector_info[i];
- struct drm_fb_helper_cmdline_mode *cmdline_mode;
+ struct drm_cmdline_mode *cmdline_mode;
cmdline_mode = &fb_helper_conn->cmdline_mode;
@@ -1105,7 +981,7 @@ static struct drm_display_mode *drm_has_preferred_mode(struct drm_fb_helper_conn
static bool drm_has_cmdline_mode(struct drm_fb_helper_connector *fb_connector)
{
- struct drm_fb_helper_cmdline_mode *cmdline_mode;
+ struct drm_cmdline_mode *cmdline_mode;
cmdline_mode = &fb_connector->cmdline_mode;
return cmdline_mode->specified;
}
@@ -1113,7 +989,7 @@ static bool drm_has_cmdline_mode(struct drm_fb_helper_connector *fb_connector)
static struct drm_display_mode *drm_pick_cmdline_mode(struct drm_fb_helper_connector *fb_helper_conn,
int width, int height)
{
- struct drm_fb_helper_cmdline_mode *cmdline_mode;
+ struct drm_cmdline_mode *cmdline_mode;
struct drm_display_mode *mode = NULL;
cmdline_mode = &fb_helper_conn->cmdline_mode;
@@ -1145,19 +1021,8 @@ static struct drm_display_mode *drm_pick_cmdline_mode(struct drm_fb_helper_conne
}
create_mode:
- if (cmdline_mode->cvt)
- mode = drm_cvt_mode(fb_helper_conn->connector->dev,
- cmdline_mode->xres, cmdline_mode->yres,
- cmdline_mode->refresh_specified ? cmdline_mode->refresh : 60,
- cmdline_mode->rb, cmdline_mode->interlace,
- cmdline_mode->margins);
- else
- mode = drm_gtf_mode(fb_helper_conn->connector->dev,
- cmdline_mode->xres, cmdline_mode->yres,
- cmdline_mode->refresh_specified ? cmdline_mode->refresh : 60,
- cmdline_mode->interlace,
- cmdline_mode->margins);
- drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
+ mode = drm_mode_create_from_cmdline_mode(fb_helper_conn->connector->dev,
+ cmdline_mode);
list_add(&mode->head, &fb_helper_conn->connector->modes);
return mode;
}
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 58e65f9..f9da47e 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -974,3 +974,157 @@ void drm_mode_connector_list_update(struct drm_connector *connector)
}
}
EXPORT_SYMBOL(drm_mode_connector_list_update);
+
+/**
+ * drm_mode_parse_command_line_for_connector - parse command line for connector
+ * @mode_option - per connector mode option
+ * @connector - connector to parse line for
+ *
+ * This parses the connector specific then generic command lines for
+ * modes and options to configure the connector.
+ *
+ * This uses the same parameters as the fb modedb.c, except for extra
+ * <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]
+ *
+ * enable/enable Digital/disable bit at the end
+ */
+bool drm_mode_parse_command_line_for_connector(const char *mode_option,
+ struct drm_connector *connector,
+ struct drm_cmdline_mode *mode)
+{
+ const char *name;
+ unsigned int namelen;
+ int res_specified = 0, bpp_specified = 0, refresh_specified = 0;
+ unsigned int xres = 0, yres = 0, bpp = 32, refresh = 0;
+ int yres_specified = 0, cvt = 0, rb = 0, interlace = 0, margins = 0;
+ int i;
+ enum drm_connector_force force = DRM_FORCE_UNSPECIFIED;
+
+ if (!mode_option)
+ mode_option = fb_mode_option;
+
+ if (!mode_option) {
+ mode->specified = false;
+ return false;
+ }
+
+ name = mode_option;
+ namelen = strlen(name);
+ for (i = namelen-1; i >= 0; i--) {
+ switch (name[i]) {
+ case '@':
+ namelen = i;
+ if (!refresh_specified && !bpp_specified &&
+ !yres_specified) {
+ refresh = simple_strtol(&name[i+1], NULL, 10);
+ refresh_specified = 1;
+ if (cvt || rb)
+ cvt = 0;
+ } else
+ goto done;
+ break;
+ case '-':
+ namelen = i;
+ if (!bpp_specified && !yres_specified) {
+ bpp = simple_strtol(&name[i+1], NULL, 10);
+ bpp_specified = 1;
+ if (cvt || rb)
+ cvt = 0;
+ } else
+ goto done;
+ break;
+ case 'x':
+ if (!yres_specified) {
+ yres = simple_strtol(&name[i+1], NULL, 10);
+ yres_specified = 1;
+ } else
+ goto done;
+ case '0' ... '9':
+ break;
+ case 'M':
+ if (!yres_specified)
+ cvt = 1;
+ break;
+ case 'R':
+ if (cvt)
+ rb = 1;
+ break;
+ case 'm':
+ if (!cvt)
+ margins = 1;
+ break;
+ case 'i':
+ if (!cvt)
+ interlace = 1;
+ break;
+ case 'e':
+ force = DRM_FORCE_ON;
+ break;
+ case 'D':
+ if ((connector->connector_type != DRM_MODE_CONNECTOR_DVII) &&
+ (connector->connector_type != DRM_MODE_CONNECTOR_HDMIB))
+ force = DRM_FORCE_ON;
+ else
+ force = DRM_FORCE_ON_DIGITAL;
+ break;
+ case 'd':
+ force = DRM_FORCE_OFF;
+ break;
+ default:
+ goto done;
+ }
+ }
+ if (i < 0 && yres_specified) {
+ xres = simple_strtol(name, NULL, 10);
+ res_specified = 1;
+ }
+done:
+ if (res_specified) {
+ mode->specified = true;
+ mode->xres = xres;
+ mode->yres = yres;
+ }
+
+ if (refresh_specified) {
+ mode->refresh_specified = true;
+ mode->refresh = refresh;
+ }
+
+ if (bpp_specified) {
+ mode->bpp_specified = true;
+ mode->bpp = bpp;
+ }
+ mode->rb = rb ? true : false;
+ mode->cvt = cvt ? true : false;
+ mode->interlace = interlace ? true : false;
+ mode->force = force;
+
+ return true;
+}
+EXPORT_SYMBOL(drm_mode_parse_command_line_for_connector);
+
+struct drm_display_mode *
+drm_mode_create_from_cmdline_mode(struct drm_device *dev,
+ struct drm_cmdline_mode *cmd)
+{
+ struct drm_display_mode *mode;
+
+ if (cmd->cvt)
+ mode = drm_cvt_mode(dev,
+ cmd->xres, cmd->yres,
+ cmd->refresh_specified ? cmd->refresh : 60,
+ cmd->rb, cmd->interlace,
+ cmd->margins);
+ else
+ mode = drm_gtf_mode(dev,
+ cmd->xres, cmd->yres,
+ cmd->refresh_specified ? cmd->refresh : 60,
+ cmd->interlace,
+ cmd->margins);
+ if (!mode)
+ return NULL;
+
+ drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
+ return mode;
+}
+EXPORT_SYMBOL(drm_mode_create_from_cmdline_mode);
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index cd08960..af4ef17 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -874,6 +874,8 @@ bool intel_lvds_init(struct drm_device *dev)
struct drm_encoder *encoder;
struct drm_display_mode *scan; /* *modes, *bios_mode; */
struct drm_crtc *crtc;
+ char *cmdline_option = NULL;
+ struct drm_cmdline_mode cmdline_mode;
u32 lvds;
int pipe;
u8 pin;
@@ -951,6 +953,7 @@ bool intel_lvds_init(struct drm_device *dev)
intel_lvds->fitting_mode = DRM_MODE_SCALE_ASPECT;
/*
* LVDS discovery:
+ * 0) user override
* 1) check for EDID on DDC
* 2) check for VBT data
* 3) check to see if LVDS is already on
@@ -959,6 +962,20 @@ bool intel_lvds_init(struct drm_device *dev)
* if closed, act like it's not there for now
*/
+ if (fb_get_options(drm_get_connector_name(connector),
+ &cmdline_option) == 0 &&
+ drm_mode_parse_command_line_for_connector(cmdline_option,
+ connector,
+ &cmdline_mode)) {
+ intel_lvds->fixed_mode =
+ drm_mode_create_from_cmdline_mode(dev, &cmdline_mode);
+ if (intel_lvds->fixed_mode) {
+ intel_lvds->fixed_mode->type |=
+ DRM_MODE_TYPE_PREFERRED;
+ goto out;
+ }
+ }
+
/*
* Attempt to get the fixed panel mode from DDC. Assume that the
* preferred mode is the right one.
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index fe29aad..bf01108 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -968,6 +968,22 @@ struct drm_minor {
struct drm_mode_group mode_group;
};
+/* mode specified on the command line */
+struct drm_cmdline_mode {
+ bool specified;
+ bool refresh_specified;
+ bool bpp_specified;
+ int xres, yres;
+ int bpp;
+ int refresh;
+ bool rb;
+ bool interlace;
+ bool cvt;
+ bool margins;
+ enum drm_connector_force force;
+};
+
+
struct drm_pending_vblank_event {
struct drm_pending_event base;
int pipe;
@@ -1381,6 +1397,15 @@ extern int drm_calc_vbltimestamp_from_scanoutpos(struct drm_device *dev,
struct drm_crtc *refcrtc);
extern void drm_calc_timestamping_constants(struct drm_crtc *crtc);
+extern bool
+drm_mode_parse_command_line_for_connector(const char *mode_option,
+ struct drm_connector *connector,
+ struct drm_cmdline_mode *mode);
+
+extern struct drm_display_mode *
+drm_mode_create_from_cmdline_mode(struct drm_device *dev,
+ struct drm_cmdline_mode *cmd);
+
/* Modesetting support */
extern void drm_vblank_pre_modeset(struct drm_device *dev, int crtc);
extern void drm_vblank_post_modeset(struct drm_device *dev, int crtc);
diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h
index f22e7fe..4e66488 100644
--- a/include/drm/drm_fb_helper.h
+++ b/include/drm/drm_fb_helper.h
@@ -40,20 +40,6 @@ struct drm_fb_helper_crtc {
struct drm_display_mode *desired_mode;
};
-/* mode specified on the command line */
-struct drm_fb_helper_cmdline_mode {
- bool specified;
- bool refresh_specified;
- bool bpp_specified;
- int xres, yres;
- int bpp;
- int refresh;
- bool rb;
- bool interlace;
- bool cvt;
- bool margins;
-};
-
struct drm_fb_helper_surface_size {
u32 fb_width;
u32 fb_height;
@@ -74,8 +60,8 @@ struct drm_fb_helper_funcs {
};
struct drm_fb_helper_connector {
- struct drm_fb_helper_cmdline_mode cmdline_mode;
struct drm_connector *connector;
+ struct drm_cmdline_mode cmdline_mode;
};
struct drm_fb_helper {
--
1.7.2.3
More information about the dri-devel
mailing list