[PATCH 3/4] drm/i915/crt: Force the initial probe after reset

[Chris Wilson]

Upon resume, like after a cold boot, we need to forcibly probe the
analog connector and cannot rely on the hotplug status.

Based on a patch by Takashi Iwai.

Reported-by: Stefan Dirsch <sndirsch at suse.de>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=26952
Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/intel_crt.c |   10 ++++++++++
 1 files changed, 10 insertions(+), 0 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 17035b8..8a77ff4 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -535,6 +535,15 @@ static int intel_crt_set_property(struct drm_connector *connector,
 	return 0;
 }
 
+static void intel_crt_reset(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct intel_crt *crt = intel_attached_crt(connector);
+
+	if (HAS_PCH_SPLIT(dev))
+		crt->force_hotplug_required = 1;
+}
+
 /*
  * Routines for controlling stuff on the analog port
  */
@@ -548,6 +557,7 @@ static const struct drm_encoder_helper_funcs intel_crt_helper_funcs = {
 };
 
 static const struct drm_connector_funcs intel_crt_connector_funcs = {
+	.reset = intel_crt_reset,
 	.dpms = drm_helper_connector_dpms,
 	.detect = intel_crt_detect,
 	.fill_modes = drm_helper_probe_single_connector_modes,
-- 
1.7.2.3