Reverting rc6 by default
Francesco Allertsen
fallertsen at gmail.com
Tue Jul 5 16:01:01 PDT 2011
On Tue, Jun 21, 2011 at 12:01:34PM -0700, Keith Packard wrote:
> Thanks. I'll see if I can't get an X201s upgraded to this version and
> see if we can reproduce the problem you're having...
Any news?
I have found the time today for more debugging.
Attached there are 3 files.
dmesg-startup is the startup of the last 3.0.0-rc6 kernel, with the
debug enabled.
dmesg-enabled is the X startup (and freeze) with debug mode and rc6
enabled.
dmesg-disabled is the X startup with debug mode enabled and rc6 disabled
(so no freeze; full kde startup and logout).
I hope this helps you to solve the problem, otherwise the X201s users
will not use the 3.0.0 kernel :-(.
If you need more informations just let me know.
Bye
Francesco
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-rc6 (lupin at fujiko) (gcc version 4.5.3 (GCC) ) #336 SMP Tue Jul 5 17:27:09 CEST 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bb27c000 (usable)
[ 0.000000] BIOS-e820: 00000000bb27c000 - 00000000bb282000 (reserved)
[ 0.000000] BIOS-e820: 00000000bb282000 - 00000000bb35f000 (usable)
[ 0.000000] BIOS-e820: 00000000bb35f000 - 00000000bb371000 (reserved)
[ 0.000000] BIOS-e820: 00000000bb371000 - 00000000bb3f2000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bb3f2000 - 00000000bb40f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bb40f000 - 00000000bb46f000 (usable)
[ 0.000000] BIOS-e820: 00000000bb46f000 - 00000000bb668000 (reserved)
[ 0.000000] BIOS-e820: 00000000bb668000 - 00000000bb6e8000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bb6e8000 - 00000000bb70f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bb70f000 - 00000000bb717000 (usable)
[ 0.000000] BIOS-e820: 00000000bb717000 - 00000000bb71f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bb71f000 - 00000000bb76c000 (usable)
[ 0.000000] BIOS-e820: 00000000bb76c000 - 00000000bb778000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bb778000 - 00000000bb77b000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bb77b000 - 00000000bb78b000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bb78b000 - 00000000bb78c000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bb78c000 - 00000000bb79f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bb79f000 - 00000000bb7ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bb7ff000 - 00000000bb800000 (usable)
[ 0.000000] BIOS-e820: 00000000bb800000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI present.
[ 0.000000] DMI: LENOVO 5129CTO/5129CTO, BIOS 6QET52WW (1.22 ) 08/23/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0xbb800 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 base 138000000 mask FF8000000 uncachable
[ 0.000000] 5 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bc000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] found SMP MP-table at [c00f6910] f6910
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] ACPI: RSDP 000f68e0 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT bb7f0970 00094 (v01 LENOVO TP-6Q 00001220 LTP 00000000)
[ 0.000000] ACPI: FACP bb7f0b00 000F4 (v04 LENOVO TP-6Q 00001220 LNVO 00000001)
[ 0.000000] ACPI: DSDT bb7f0e6b 0DD26 (v01 LENOVO TP-6Q 00001220 MSFT 03000001)
[ 0.000000] ACPI: FACS bb6e7000 00040
[ 0.000000] ACPI: SSDT bb7f0cb4 001B7 (v01 LENOVO TP-6Q 00001220 MSFT 03000001)
[ 0.000000] ACPI: ECDT bb7feb91 00052 (v01 LENOVO TP-6Q 00001220 LNVO 00000001)
[ 0.000000] ACPI: APIC bb7febe3 00084 (v01 LENOVO TP-6Q 00001220 LNVO 00000001)
[ 0.000000] ACPI: MCFG bb7fec9f 0003C (v01 LENOVO TP-6Q 00001220 LNVO 00000001)
[ 0.000000] ACPI: HPET bb7fecdb 00038 (v01 LENOVO TP-6Q 00001220 LNVO 00000001)
[ 0.000000] ACPI: ASF! bb7fedbe 000A4 (v16 LENOVO TP-6Q 00001220 PTL 00000001)
[ 0.000000] ACPI: SLIC bb7fee62 00176 (v01 LENOVO TP-6Q 00001220 LTP 00000000)
[ 0.000000] ACPI: BOOT bb7fefd8 00028 (v01 LENOVO TP-6Q 00001220 LTP 00000001)
[ 0.000000] ACPI: SSDT bb6e590a 0085B (v01 LENOVO TP-6Q 00001220 INTL 20050513)
[ 0.000000] ACPI: TCPA bb78b000 00032 (v02 PTL CRESTLN 06040000 00005A52)
[ 0.000000] ACPI: SSDT bb77a000 009F1 (v01 PmRef CpuPm 00003000 INTL 20050513)
[ 0.000000] ACPI: SSDT bb779000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20050513)
[ 0.000000] ACPI: SSDT bb778000 0049F (v01 PmRef ApTst 00003000 INTL 20050513)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2112MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000bb800
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bb27c
[ 0.000000] 0: 0x000bb282 -> 0x000bb35f
[ 0.000000] 0: 0x000bb40f -> 0x000bb46f
[ 0.000000] 0: 0x000bb70f -> 0x000bb717
[ 0.000000] 0: 0x000bb71f -> 0x000bb76c
[ 0.000000] 0: 0x000bb7ff -> 0x000bb800
[ 0.000000] On node 0 totalpages: 766877
[ 0.000000] free_area_init_node: node 0, pgdat c16e8280, node_mem_map f608d200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4225 pages used for memmap
[ 0.000000] HighMem zone: 535440 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f5c00000 s24640 r0 d24512 u1048576
[ 0.000000] pcpu-alloc: s24640 r0 d24512 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 760876
[ 0.000000] Kernel command line: BOOT_IMAGE=Linux-git ro root=802 netconsole=6665 at 10.0.0.1/eth0,6666 at 10.0.0.2/00:26:9e:98:bb:00 drm.debug=0x04
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:000bb800)
[ 0.000000] Memory: 3034200k/3072000k available (5038k kernel code, 33308k reserved, 2087k data, 392k init, 2158660k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc16f6000 - 0xc1758000 ( 392 kB)
[ 0.000000] .data : 0xc14eb906 - 0xc16f5600 (2087 kB)
[ 0.000000] .text : 0xc1000000 - 0xc14eb906 (5038 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f5808000 soft=f580a000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 1995.250 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.50 BogoMIPS (lpj=1995250)
[ 0.000009] pid_max: default: 32768 minimum: 301
[ 0.000030] Security Framework initialized
[ 0.000045] Mount-cache hash table entries: 512
[ 0.000150] Initializing cgroup subsys freezer
[ 0.000175] CPU: Physical Processor ID: 0
[ 0.000178] CPU: Processor Core ID: 0
[ 0.000183] mce: CPU supports 9 MCE banks
[ 0.000195] CPU0: Thermal monitoring enabled (TM1)
[ 0.000203] using mwait in idle threads.
[ 0.000283] ACPI: Core revision 20110413
[ 0.018231] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.018641] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.028641] CPU0: Intel(R) Core(TM) i7 CPU L 620 @ 2.00GHz stepping 02
[ 0.130365] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[ 0.130375] ... version: 3
[ 0.130378] ... bit width: 48
[ 0.130380] ... generic registers: 4
[ 0.130383] ... value mask: 0000ffffffffffff
[ 0.130386] ... max period: 000000007fffffff
[ 0.130389] ... fixed-purpose events: 3
[ 0.130392] ... event mask: 000000070000000f
[ 0.130549] CPU 1 irqstacks, hard=f588a000 soft=f588c000
[ 0.130551] Booting Node 0, Processors #1
[ 0.130554] smpboot cpu 1: start_ip = 9a000
[ 0.141134] Initializing CPU#1
[ 0.221474] CPU 2 irqstacks, hard=f5896000 soft=f5898000
[ 0.221481] #2
[ 0.221482] smpboot cpu 2: start_ip = 9a000
[ 0.231764] Initializing CPU#2
[ 0.312483] CPU 3 irqstacks, hard=f58a2000 soft=f58a4000
[ 0.312489] #3 Ok.
[ 0.312492] smpboot cpu 3: start_ip = 9a000
[ 0.322772] Initializing CPU#3
[ 0.403317] Brought up 4 CPUs
[ 0.403324] Total of 4 processors activated (15959.85 BogoMIPS).
[ 0.405112] kworker/u:0 used greatest stack depth: 7064 bytes left
[ 0.405243] PM: Registering ACPI NVS region at bb371000 (528384 bytes)
[ 0.405261] PM: Registering ACPI NVS region at bb668000 (524288 bytes)
[ 0.405275] PM: Registering ACPI NVS region at bb76c000 (49152 bytes)
[ 0.405279] PM: Registering ACPI NVS region at bb77b000 (65536 bytes)
[ 0.405285] PM: Registering ACPI NVS region at bb78c000 (77824 bytes)
[ 0.405376] Time: 17:32:37 Date: 07/05/11
[ 0.405414] NET: Registered protocol family 16
[ 0.405699] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.405705] ACPI: bus type pci registered
[ 0.405783] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.405790] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.405793] PCI: Using MMCONFIG for extended config space
[ 0.405797] PCI: Using configuration type 1 for base access
[ 0.412900] bio: create slab <bio-0> at 0
[ 0.414330] ACPI: EC: EC description table is found, configuring boot EC
[ 0.418837] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.497006] ACPI: SSDT bb71ac18 003A9 (v01 PmRef Cpu0Ist 00003000 INTL 20050513)
[ 0.497352] ACPI: Dynamic OEM Table Load:
[ 0.497357] ACPI: SSDT (null) 003A9 (v01 PmRef Cpu0Ist 00003000 INTL 20050513)
[ 0.497488] ACPI: SSDT bb718718 006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20050513)
[ 0.497846] ACPI: Dynamic OEM Table Load:
[ 0.497850] ACPI: SSDT (null) 006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20050513)
[ 0.503476] ACPI: SSDT bb719a98 00303 (v01 PmRef ApIst 00003000 INTL 20050513)
[ 0.503868] ACPI: Dynamic OEM Table Load:
[ 0.503872] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20050513)
[ 0.506333] ACPI: SSDT bb717d98 00119 (v01 PmRef ApCst 00003000 INTL 20050513)
[ 0.506687] ACPI: Dynamic OEM Table Load:
[ 0.506691] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20050513)
[ 0.510803] ACPI: Interpreter enabled
[ 0.510808] ACPI: (supports S0 S3 S4 S5)
[ 0.510829] ACPI: Using IOAPIC for interrupt routing
[ 0.515224] ACPI: Power Resource [PUBS] (on)
[ 0.519054] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.520144] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.520151] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.520167] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
[ 0.520230] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[ 0.520252] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[ 0.520271] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[ 0.520291] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[ 0.520307] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[ 0.520323] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[ 0.520348] pci_bus 0000:ff: on NUMA node 0
[ 0.520356] pci0000:ff: Requesting ACPI _OSC control (0x1d)
[ 0.520361] pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.520365] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.520758] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.520825] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.520830] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.520834] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.520839] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.520844] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.520849] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
[ 0.520861] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[ 0.520891] pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
[ 0.520901] pci 0000:00:02.0: reg 10: [mem 0xf2000000-0xf23fffff 64bit]
[ 0.520908] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.520912] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
[ 0.520971] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[ 0.520998] pci 0000:00:16.0: reg 10: [mem 0xf2727800-0xf272780f 64bit]
[ 0.521073] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.521079] pci 0000:00:16.0: PME# disabled
[ 0.521105] pci 0000:00:16.3: [8086:3b67] type 0 class 0x000700
[ 0.521127] pci 0000:00:16.3: reg 10: [io 0x1808-0x180f]
[ 0.521138] pci 0000:00:16.3: reg 14: [mem 0xf2524000-0xf2524fff]
[ 0.521253] pci 0000:00:19.0: [8086:10ea] type 0 class 0x000200
[ 0.521283] pci 0000:00:19.0: reg 10: [mem 0xf2500000-0xf251ffff]
[ 0.521297] pci 0000:00:19.0: reg 14: [mem 0xf2525000-0xf2525fff]
[ 0.521308] pci 0000:00:19.0: reg 18: [io 0x1820-0x183f]
[ 0.521376] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.521381] pci 0000:00:19.0: PME# disabled
[ 0.521411] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[ 0.521436] pci 0000:00:1a.0: reg 10: [mem 0xf2728000-0xf27283ff]
[ 0.521525] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.521530] pci 0000:00:1a.0: PME# disabled
[ 0.521559] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[ 0.521580] pci 0000:00:1b.0: reg 10: [mem 0xf2520000-0xf2523fff 64bit]
[ 0.521658] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.521663] pci 0000:00:1b.0: PME# disabled
[ 0.521687] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 0.521765] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.521770] pci 0000:00:1c.0: PME# disabled
[ 0.521797] pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604
[ 0.521875] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.521880] pci 0000:00:1c.3: PME# disabled
[ 0.521905] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
[ 0.521983] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.521988] pci 0000:00:1c.4: PME# disabled
[ 0.522023] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[ 0.522047] pci 0000:00:1d.0: reg 10: [mem 0xf2728400-0xf27287ff]
[ 0.522135] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.522140] pci 0000:00:1d.0: PME# disabled
[ 0.522164] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.522239] pci 0000:00:1f.0: [8086:3b07] type 0 class 0x000601
[ 0.522362] pci 0000:00:1f.2: [8086:3b2f] type 0 class 0x000106
[ 0.522388] pci 0000:00:1f.2: reg 10: [io 0x1860-0x1867]
[ 0.522399] pci 0000:00:1f.2: reg 14: [io 0x1814-0x1817]
[ 0.522410] pci 0000:00:1f.2: reg 18: [io 0x1818-0x181f]
[ 0.522421] pci 0000:00:1f.2: reg 1c: [io 0x1810-0x1813]
[ 0.522433] pci 0000:00:1f.2: reg 20: [io 0x1840-0x185f]
[ 0.522444] pci 0000:00:1f.2: reg 24: [mem 0xf2727000-0xf27277ff]
[ 0.522492] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.522496] pci 0000:00:1f.2: PME# disabled
[ 0.522518] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 0.522539] pci 0000:00:1f.3: reg 10: [mem 0xf2728800-0xf27288ff 64bit]
[ 0.522569] pci 0000:00:1f.3: reg 20: [io 0x1880-0x189f]
[ 0.522615] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[ 0.522643] pci 0000:00:1f.6: reg 10: [mem 0xf2526000-0xf2526fff 64bit]
[ 0.522777] pci 0000:00:1c.0: PCI bridge to [bus 0d-0d]
[ 0.522784] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.522790] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.522797] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.522853] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.522860] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.522865] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.522872] pci 0000:00:1c.3: bridge window [mem 0xf2800000-0xf28fffff 64bit pref]
[ 0.522985] pci 0000:02:00.0: [8086:4230] type 0 class 0x000280
[ 0.523038] pci 0000:02:00.0: reg 10: [mem 0xf2400000-0xf2401fff 64bit]
[ 0.523212] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.523226] pci 0000:02:00.0: PME# disabled
[ 0.523319] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.523325] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
[ 0.523330] pci 0000:00:1c.4: bridge window [mem 0xf2400000-0xf24fffff]
[ 0.523338] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.523412] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] (subtractive decode)
[ 0.523419] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.523424] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.523431] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.523434] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.523436] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.523438] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.523441] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.523443] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.523445] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.523470] pci_bus 0000:00: on NUMA node 0
[ 0.523472] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.523583] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.523613] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.523641] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
[ 0.523769] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.523937] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[ 0.523942] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.526836] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.526898] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.526948] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.527009] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.527069] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.527118] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.527168] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.527229] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.527384] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.527394] vgaarb: loaded
[ 0.527396] vgaarb: bridge control possible 0000:00:02.0
[ 0.527541] SCSI subsystem initialized
[ 0.527635] libata version 3.00 loaded.
[ 0.527795] usbcore: registered new interface driver usbfs
[ 0.527831] usbcore: registered new interface driver hub
[ 0.527873] usbcore: registered new device driver usb
[ 0.528055] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.528060] PCI: Using ACPI for IRQ routing
[ 0.537954] PCI: pci_cache_line_size set to 64 bytes
[ 0.538033] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[ 0.538035] reserve RAM buffer: 00000000bb27c000 - 00000000bbffffff
[ 0.538040] reserve RAM buffer: 00000000bb35f000 - 00000000bbffffff
[ 0.538045] reserve RAM buffer: 00000000bb46f000 - 00000000bbffffff
[ 0.538049] reserve RAM buffer: 00000000bb717000 - 00000000bbffffff
[ 0.538052] reserve RAM buffer: 00000000bb76c000 - 00000000bbffffff
[ 0.538055] reserve RAM buffer: 00000000bb800000 - 00000000bbffffff
[ 0.538316] cfg80211: Calling CRDA to update world regulatory domain
[ 0.538518] NetLabel: Initializing
[ 0.538523] NetLabel: domain hash size = 128
[ 0.538525] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.538537] NetLabel: unlabeled traffic allowed by default
[ 0.538611] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.538620] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.540645] Switching to clocksource hpet
[ 0.541126] Switched to NOHz mode on CPU #0
[ 0.541204] Switched to NOHz mode on CPU #1
[ 0.541233] Switched to NOHz mode on CPU #3
[ 0.541271] Switched to NOHz mode on CPU #2
[ 0.543645] pnp: PnP ACPI init
[ 0.543657] ACPI: bus type pnp registered
[ 0.544851] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.544854] pnp 00:00: [mem 0x000c0000-0x000c3fff]
[ 0.544856] pnp 00:00: [mem 0x000c4000-0x000c7fff]
[ 0.544857] pnp 00:00: [mem 0x000c8000-0x000cbfff]
[ 0.544859] pnp 00:00: [mem 0x000cc000-0x000cffff]
[ 0.544861] pnp 00:00: [mem 0x000d0000-0x000d3fff]
[ 0.544863] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
[ 0.544865] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
[ 0.544867] pnp 00:00: [mem 0x000dc000-0x000dffff]
[ 0.544868] pnp 00:00: [mem 0x000e0000-0x000e3fff]
[ 0.544870] pnp 00:00: [mem 0x000e4000-0x000e7fff]
[ 0.544872] pnp 00:00: [mem 0x000e8000-0x000ebfff]
[ 0.544874] pnp 00:00: [mem 0x000ec000-0x000effff]
[ 0.544875] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.544877] pnp 00:00: [mem 0x00100000-0xbfffffff]
[ 0.544879] pnp 00:00: [mem 0xfec00000-0xfed3ffff]
[ 0.544881] pnp 00:00: [mem 0xfed4c000-0xffffffff]
[ 0.544966] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.544972] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.544977] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.544981] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.544985] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.544989] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.544994] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.544998] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.545003] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.545007] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.545011] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.545016] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.545020] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.545024] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.545029] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.545034] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.545047] pnp 00:01: [bus ff]
[ 0.545117] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.545134] pnp 00:02: [bus 00-fe]
[ 0.545137] pnp 00:02: [io 0x0cf8-0x0cff]
[ 0.545139] pnp 00:02: [io 0x0000-0x0cf7 window]
[ 0.545141] pnp 00:02: [io 0x0d00-0xffff window]
[ 0.545143] pnp 00:02: [mem 0x000a0000-0x000bffff window]
[ 0.545145] pnp 00:02: [mem 0x000c0000-0x000c3fff window]
[ 0.545146] pnp 00:02: [mem 0x000c4000-0x000c7fff window]
[ 0.545148] pnp 00:02: [mem 0x000c8000-0x000cbfff window]
[ 0.545150] pnp 00:02: [mem 0x000cc000-0x000cffff window]
[ 0.545152] pnp 00:02: [mem 0x000d0000-0x000d3fff window]
[ 0.545154] pnp 00:02: [mem 0x000d4000-0x000d7fff window]
[ 0.545156] pnp 00:02: [mem 0x000d8000-0x000dbfff window]
[ 0.545158] pnp 00:02: [mem 0x000dc000-0x000dffff window]
[ 0.545160] pnp 00:02: [mem 0x000e0000-0x000e3fff window]
[ 0.545161] pnp 00:02: [mem 0x000e4000-0x000e7fff window]
[ 0.545163] pnp 00:02: [mem 0x000e8000-0x000ebfff window]
[ 0.545165] pnp 00:02: [mem 0x000ec000-0x000effff window]
[ 0.545167] pnp 00:02: [mem 0xc0000000-0xfebfffff window]
[ 0.545169] pnp 00:02: [mem 0xfed40000-0xfed4bfff window]
[ 0.545235] pnp 00:02: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.545501] pnp 00:03: [io 0x0010-0x001f]
[ 0.545503] pnp 00:03: [io 0x0090-0x009f]
[ 0.545505] pnp 00:03: [io 0x0024-0x0025]
[ 0.545506] pnp 00:03: [io 0x0028-0x0029]
[ 0.545508] pnp 00:03: [io 0x002c-0x002d]
[ 0.545510] pnp 00:03: [io 0x0030-0x0031]
[ 0.545511] pnp 00:03: [io 0x0034-0x0035]
[ 0.545513] pnp 00:03: [io 0x0038-0x0039]
[ 0.545514] pnp 00:03: [io 0x003c-0x003d]
[ 0.545516] pnp 00:03: [io 0x00a4-0x00a5]
[ 0.545518] pnp 00:03: [io 0x00a8-0x00a9]
[ 0.545519] pnp 00:03: [io 0x00ac-0x00ad]
[ 0.545521] pnp 00:03: [io 0x00b0-0x00b5]
[ 0.545522] pnp 00:03: [io 0x00b8-0x00b9]
[ 0.545524] pnp 00:03: [io 0x00bc-0x00bd]
[ 0.545527] pnp 00:03: [io 0x0050-0x0053]
[ 0.545529] pnp 00:03: [io 0x0072-0x0077]
[ 0.545530] pnp 00:03: [io 0x164e-0x164f]
[ 0.545532] pnp 00:03: [io 0x002e-0x002f]
[ 0.545533] pnp 00:03: [io 0x1000-0x107f]
[ 0.545535] pnp 00:03: [io 0x1180-0x11ff]
[ 0.545537] pnp 00:03: [io 0x0800-0x080f]
[ 0.545538] pnp 00:03: [io 0x15e0-0x15ef]
[ 0.545540] pnp 00:03: [io 0x1600-0x1641]
[ 0.545541] pnp 00:03: [io 0x1644-0x167f]
[ 0.545543] pnp 00:03: [mem 0xe0000000-0xefffffff]
[ 0.545545] pnp 00:03: [mem 0xfeaff000-0xfeafffff]
[ 0.545546] pnp 00:03: [mem 0xfed1c000-0xfed1ffff]
[ 0.545548] pnp 00:03: [mem 0xfed10000-0xfed13fff]
[ 0.545550] pnp 00:03: [mem 0xfed18000-0xfed18fff]
[ 0.545551] pnp 00:03: [mem 0xfed19000-0xfed19fff]
[ 0.545553] pnp 00:03: [mem 0xfed45000-0xfed4bfff]
[ 0.545649] system 00:03: [io 0x164e-0x164f] has been reserved
[ 0.545655] system 00:03: [io 0x1000-0x107f] has been reserved
[ 0.545659] system 00:03: [io 0x1180-0x11ff] has been reserved
[ 0.545663] system 00:03: [io 0x0800-0x080f] has been reserved
[ 0.545667] system 00:03: [io 0x15e0-0x15ef] has been reserved
[ 0.545671] system 00:03: [io 0x1600-0x1641] has been reserved
[ 0.545675] system 00:03: [io 0x1644-0x167f] could not be reserved
[ 0.545680] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.545684] system 00:03: [mem 0xfeaff000-0xfeafffff] has been reserved
[ 0.545689] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.545711] system 00:03: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.545715] system 00:03: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.545720] system 00:03: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.545724] system 00:03: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.545729] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.545757] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.545816] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.545826] pnp 00:05: [io 0x0000-0x000f]
[ 0.545827] pnp 00:05: [io 0x0080-0x008f]
[ 0.545829] pnp 00:05: [io 0x00c0-0x00df]
[ 0.545831] pnp 00:05: [dma 4]
[ 0.545885] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.545893] pnp 00:06: [io 0x0061]
[ 0.545948] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.545957] pnp 00:07: [io 0x00f0]
[ 0.545965] pnp 00:07: [irq 13]
[ 0.546020] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.546029] pnp 00:08: [io 0x0070-0x0071]
[ 0.546034] pnp 00:08: [irq 8]
[ 0.546090] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.546099] pnp 00:09: [io 0x0060]
[ 0.546100] pnp 00:09: [io 0x0064]
[ 0.546106] pnp 00:09: [irq 1]
[ 0.546161] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.546173] pnp 00:0a: [irq 12]
[ 0.546229] pnp 00:0a: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active)
[ 0.546487] pnp 00:0b: [mem 0xfed40000-0xfed44fff]
[ 0.546549] pnp 00:0b: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.546987] pnp: PnP ACPI: found 12 devices
[ 0.546992] ACPI: ACPI bus type pnp unregistered
[ 0.585242] PCI: max bus depth: 1 pci_try_num: 2
[ 0.585284] pci 0000:00:1c.0: PCI bridge to [bus 0d-0d]
[ 0.585289] pci 0000:00:1c.0: bridge window [io disabled]
[ 0.585297] pci 0000:00:1c.0: bridge window [mem disabled]
[ 0.585303] pci 0000:00:1c.0: bridge window [mem pref disabled]
[ 0.585313] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.585318] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.585326] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.585333] pci 0000:00:1c.3: bridge window [mem 0xf2800000-0xf28fffff 64bit pref]
[ 0.585344] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.585347] pci 0000:00:1c.4: bridge window [io disabled]
[ 0.585355] pci 0000:00:1c.4: bridge window [mem 0xf2400000-0xf24fffff]
[ 0.585362] pci 0000:00:1c.4: bridge window [mem pref disabled]
[ 0.585371] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e]
[ 0.585374] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.585382] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.585388] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.585412] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.585421] pci 0000:00:1c.0: setting latency timer to 64
[ 0.585432] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.585439] pci 0000:00:1c.3: setting latency timer to 64
[ 0.585446] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.585453] pci 0000:00:1c.4: setting latency timer to 64
[ 0.585461] pci 0000:00:1e.0: setting latency timer to 64
[ 0.585465] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.585467] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.585469] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.585471] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.585473] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.585475] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.585477] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 0.585479] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
[ 0.585481] pci_bus 0000:05: resource 2 [mem 0xf2800000-0xf28fffff 64bit pref]
[ 0.585483] pci_bus 0000:02: resource 1 [mem 0xf2400000-0xf24fffff]
[ 0.585485] pci_bus 0000:0e: resource 4 [io 0x0000-0x0cf7]
[ 0.585487] pci_bus 0000:0e: resource 5 [io 0x0d00-0xffff]
[ 0.585489] pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.585491] pci_bus 0000:0e: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.585493] pci_bus 0000:0e: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.585495] pci_bus 0000:0e: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.585525] NET: Registered protocol family 2
[ 0.585571] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.585727] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.586316] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.586610] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.586614] TCP reno registered
[ 0.586618] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.586629] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.586718] NET: Registered protocol family 1
[ 0.586820] RPC: Registered named UNIX socket transport module.
[ 0.586824] RPC: Registered udp transport module.
[ 0.586827] RPC: Registered tcp transport module.
[ 0.586829] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.586846] pci 0000:00:02.0: Boot video device
[ 0.586918] PCI: CLS 64 bytes, default 64
[ 0.586959] Simple Boot Flag at 0x35 set to 0x1
[ 0.588491] microcode: CPU0 sig=0x20652, pf=0x10, revision=0x9
[ 0.588500] microcode: CPU1 sig=0x20652, pf=0x10, revision=0x9
[ 0.588511] microcode: CPU2 sig=0x20652, pf=0x10, revision=0x9
[ 0.588521] microcode: CPU3 sig=0x20652, pf=0x10, revision=0x9
[ 0.588568] microcode: Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
[ 0.588868] audit: initializing netlink socket (disabled)
[ 0.588878] type=2000 audit(1309887157.348:1): initialized
[ 0.615295] highmem bounce pool size: 64 pages
[ 0.615304] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.625742] VFS: Disk quotas dquot_6.5.2
[ 0.625866] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.627327] SGI XFS with security attributes, large block/inode numbers, no debug enabled
[ 0.627942] msgmni has been set to 1710
[ 0.628326] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.628332] io scheduler noop registered (default)
[ 0.628938] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.629079] vesafb: mode is 1024x768x8, linelength=1024, pages=41
[ 0.629083] vesafb: scrolling: redraw
[ 0.629087] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
[ 0.629440] vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 1536k, total 32704k
[ 0.629500] fbcon: VESA VGA (fb0) is primary device
[ 0.662302] Console: switching to colour frame buffer device 128x48
[ 0.695440] fb0: VESA VGA frame buffer device
[ 0.695938] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.696699] ACPI: AC Adapter [AC] (on-line)
[ 0.697135] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.697788] ACPI: Lid Switch [LID]
[ 0.698061] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.698558] ACPI: Sleep Button [SLPB]
[ 0.698870] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.699322] ACPI: Power Button [PWRF]
[ 0.699652] ACPI: acpi_idle registered with cpuidle
[ 0.701510] Monitor-Mwait will be used to enter C-1 state
[ 0.701538] Monitor-Mwait will be used to enter C-2 state
[ 0.701566] Monitor-Mwait will be used to enter C-3 state
[ 0.707065] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.707411] ACPI: Thermal Zone [THM0] (54 C)
[ 0.707858] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.723952] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.724617] ACPI: Battery Slot [BAT0] (battery present)
[ 0.732842] serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.753816] 0000:00:16.3: ttyS0 at I/O 0x1808 (irq = 17) is a 16550A
[ 0.770849] Non-volatile memory driver v1.3
[ 0.771160] Linux agpgart interface v0.103
[ 0.771464] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 0.771969] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.773662] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 0.774251] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.774784] [drm] Initialized drm 1.1.0 20060810
[ 0.790048] i915 0000:00:02.0: power state changed by ACPI to D0
[ 0.805551] i915 0000:00:02.0: power state changed by ACPI to D0
[ 0.821142] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.836783] i915 0000:00:02.0: setting latency timer to 64
[ 0.864922] i915 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.864927] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.866670] [drm] Driver supports precise vblank timestamp query.
[ 0.868407] [drm:intel_detect_pch], Found Ibex Peak PCH
[ 0.868410] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
[ 0.868415] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[ 0.868417] [drm:drm_mode_debug_printmodeline], Modeline 0:"1440x900" 0 74080 1440 1464 1480 1600 900 903 909 926 0x8 0xa
[ 0.868426] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
[ 0.868428] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[ 0.868433] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
[ 0.868443] [drm:intel_dsm_pci_probe], no _DSM method for intel device
[ 0.868456] [drm:intel_modeset_init], 2 display pipes available.
[ 0.868464] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.932415] [drm:intel_crt_init], pch crt adpa set to 0xf40018
[ 0.932609] [drm:intel_dp_i2c_init], i2c_init DPDDC-C
[ 0.933121] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[ 0.933124] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 0.933636] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[ 0.933638] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 0.933704] [drm:ironlake_crtc_dpms], crtc 0/0 dpms off
[ 0.933709] [drm:i915_get_vblank_timestamp], crtc 0 is disabled
[ 0.985460] [drm:intel_wait_for_vblank], vblank wait timed out
[ 1.013855] [drm:intel_update_fbc],
[ 1.013857] [drm:intel_update_fbc], no output, disabling
[ 1.013860] [drm:ironlake_crtc_dpms], crtc 1/1 dpms off
[ 1.013862] [drm:i915_get_vblank_timestamp], crtc 1 is disabled
[ 1.014506] [drm:intel_update_fbc],
[ 1.014508] [drm:intel_update_fbc], no output, disabling
[ 1.110332] [drm:i915_setup_compression], FBC base 0xbe000000, ll base 0x00000000, size 28M
[ 1.110418] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 1.110427] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 1.110429] [drm:drm_mode_debug_printmodeline], Modeline 21:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa
[ 1.110434] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[ 1.110437] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40018
[ 1.120389] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[ 1.120394] [drm:intel_crt_detect], CRT not detected via hotplug
[ 1.120398] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected
[ 1.120404] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
[ 1.131880] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
[ 1.131883] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1]
[ 1.132395] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[ 1.132397] [drm:ironlake_dp_detect], DPCD: 0000
[ 1.132399] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected
[ 1.132402] [drm:drm_setup_crtcs],
[ 1.132403] [drm:drm_enable_connectors], connector 5 enabled? yes
[ 1.132406] [drm:drm_enable_connectors], connector 12 enabled? no
[ 1.132408] [drm:drm_enable_connectors], connector 15 enabled? no
[ 1.132410] [drm:drm_enable_connectors], connector 18 enabled? no
[ 1.132412] [drm:drm_target_preferred], looking for cmdline mode on connector 5
[ 1.132414] [drm:drm_target_preferred], looking for preferred mode on connector 5
[ 1.132416] [drm:drm_target_preferred], found mode 1440x900
[ 1.132418] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[ 1.132421] [drm:drm_setup_crtcs], desired mode 1440x900 set on crtc 3
[ 1.148595] [drm:intelfb_create], allocated 1440x900 fb: 0x00045000, bo f594f200
[ 1.148601] checking generic (d0000000 1ff0000) vs hw (d0000000 10000000)
[ 1.148603] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 1.150412] Console: switching to colour dummy device 80x25
[ 1.150817] fbcon: inteldrmfb (fb0) is primary device
[ 1.150881] [drm:drm_crtc_helper_set_config],
[ 1.150883] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0)
[ 1.150888] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[ 1.150890] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[ 1.150892] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.150895] [drm:drm_mode_debug_printmodeline], Modeline 8:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa
[ 1.150899] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[ 1.150900] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[ 1.150903] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 1.150905] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[ 1.150906] [drm:drm_mode_debug_printmodeline], Modeline 8:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa
[ 1.150913] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[ 1.150926] [drm:ironlake_crtc_mode_set], using SSC reference clock of 120 MHz
[ 1.151157] [drm:ironlake_crtc_mode_set], Mode for pipe A:
[ 1.151159] [drm:drm_mode_debug_printmodeline], Modeline 8:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa
[ 1.203340] [drm:intel_wait_for_vblank], vblank wait timed out
[ 1.203345] [drm:intel_pipe_set_base_atomic], Writing base 00045000 00000000 0 0 5760
[ 1.203351] [drm:intel_update_fbc],
[ 1.203354] [drm:intel_update_fbc], fbc disabled per module param (default off)
[ 1.203358] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6
[ 1.203364] [drm:ironlake_check_srwm], watermark 1: display plane 26, fbc lines 3, cursor 6
[ 1.203369] [drm:ironlake_check_srwm], watermark 2: display plane 81, fbc lines 3, cursor 6
[ 1.203375] [drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:8:1440x900]
[ 1.203380] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6
[ 1.203385] [drm:ironlake_check_srwm], watermark 1: display plane 26, fbc lines 3, cursor 6
[ 1.203391] [drm:ironlake_check_srwm], watermark 2: display plane 81, fbc lines 3, cursor 6
[ 1.255310] [drm:intel_wait_for_vblank], vblank wait timed out
[ 1.307282] [drm:intel_wait_for_vblank], vblank wait timed out
[ 1.307592] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x700
[ 1.307594] [drm:ironlake_fdi_link_train], FDI train 1 done.
[ 1.307749] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600
[ 1.307751] [drm:ironlake_fdi_link_train], FDI train 2 done.
[ 1.307752] [drm:ironlake_fdi_link_train], FDI train done
[ 1.309021] [drm:intel_update_fbc],
[ 1.309022] [drm:intel_update_fbc], fbc disabled per module param (default off)
[ 1.309031] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 1.309033] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] set DPMS on
[ 1.309044] [drm:drm_crtc_helper_set_config],
[ 1.309046] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
[ 1.309048] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 1.309067] [drm:drm_crtc_helper_set_config],
[ 1.309069] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0)
[ 1.309072] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 1.313966] Console: switching to colour frame buffer device 180x56
[ 1.313971] [drm:drm_crtc_helper_set_config],
[ 1.313972] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0)
[ 1.313976] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 1.318916] fb0: inteldrmfb frame buffer device
[ 1.318947] drm: registered panic notifier
[ 1.329641] acpi device:02: registered as cooling_device4
[ 1.329808] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.329870] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 1.329984] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.331081] loop: module loaded
[ 1.331407] ahci 0000:00:1f.2: version 3.0
[ 1.331419] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.331508] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 1.331544] ahci: SSS flag set, parallel bus scan disabled
[ 1.331629] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
[ 1.331682] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 1.331744] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.338246] scsi0 : ahci
[ 1.338421] scsi1 : ahci
[ 1.338561] scsi2 : ahci
[ 1.338697] scsi3 : ahci
[ 1.338836] scsi4 : ahci
[ 1.338975] scsi5 : ahci
[ 1.339401] ata1: SATA max UDMA/133 abar m2048 at 0xf2727000 port 0xf2727100 irq 41
[ 1.339452] ata2: SATA max UDMA/133 abar m2048 at 0xf2727000 port 0xf2727180 irq 41
[ 1.339500] ata3: DUMMY
[ 1.339519] ata4: DUMMY
[ 1.339540] ata5: SATA max UDMA/133 abar m2048 at 0xf2727000 port 0xf2727300 irq 41
[ 1.339589] ata6: SATA max UDMA/133 abar m2048 at 0xf2727000 port 0xf2727380 irq 41
[ 1.340096] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 1.340144] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.340229] tun: Universal TUN/TAP device driver, 1.6
[ 1.340281] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[ 1.340378] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
[ 1.340424] iwl4965: Copyright(c) 2003-2011 Intel Corporation
[ 1.340489] iwl4965 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.340542] iwl4965 0000:02:00.0: setting latency timer to 64
[ 1.340562] iwl4965 0000:02:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
[ 1.382738] iwl4965 0000:02:00.0: device EEPROM VER=0x36, CALIB=0x5
[ 1.384730] iwl4965 0000:02:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
[ 1.386794] iwl4965 0000:02:00.0: irq 42 for MSI/MSI-X
[ 1.387111] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.389118] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96
[ 1.389134] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 1.391136] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 1.393105] ehci_hcd 0000:00:1a.0: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 1.395063] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.395067] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.397009] drivers/usb/core/inode.c: creating file 'devices'
[ 1.397012] drivers/usb/core/inode.c: creating file '001'
[ 1.397071] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.399014] ehci_hcd 0000:00:1a.0: reset hcs_params 0x200003 dbg=2 cc=0 pcc=0 ordered !ppc ports=3
[ 1.399018] ehci_hcd 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[ 1.399032] ehci_hcd 0000:00:1a.0: support lpm
[ 1.399043] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.400981] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.404888] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.404890] ehci_hcd 0000:00:1a.0: supports USB remote wakeup
[ 1.404905] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xf2728000
[ 1.406844] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.410741] ehci_hcd 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 1.416245] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.418227] usb usb1: default language 0x0409
[ 1.418235] usb usb1: udev 1, busnum 1, minor = 0
[ 1.418237] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.420162] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.422096] usb usb1: Product: EHCI Host Controller
[ 1.424008] usb usb1: Manufacturer: Linux 3.0.0-rc6 ehci_hcd
[ 1.425918] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.427921] usb usb1: usb_probe_device
[ 1.427924] usb usb1: configuration #1 chosen from 1 choice
[ 1.427931] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 1.427979] hub 1-0:1.0: usb_probe_interface
[ 1.427981] hub 1-0:1.0: usb_probe_interface - got id
[ 1.427983] hub 1-0:1.0: USB hub found
[ 1.429911] hub 1-0:1.0: 3 ports detected
[ 1.431821] hub 1-0:1.0: standalone hub
[ 1.431823] hub 1-0:1.0: no power switching (usb 1.0)
[ 1.431824] hub 1-0:1.0: individual port over-current protection
[ 1.431826] hub 1-0:1.0: power on to power good time: 20ms
[ 1.431829] hub 1-0:1.0: local power source is good
[ 1.431831] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 1.431853] drivers/usb/core/inode.c: creating file '001'
[ 1.431892] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 1.433827] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 1.435735] ehci_hcd 0000:00:1d.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.437623] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.437627] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.439493] drivers/usb/core/inode.c: creating file '002'
[ 1.439551] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.441434] ehci_hcd 0000:00:1d.0: reset hcs_params 0x200003 dbg=2 cc=0 pcc=0 ordered !ppc ports=3
[ 1.441438] ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[ 1.441452] ehci_hcd 0000:00:1d.0: support lpm
[ 1.441464] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.443327] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.447216] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.447217] ehci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 1.447232] ehci_hcd 0000:00:1d.0: irq 19, io mem 0xf2728400
[ 1.449093] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.452977] ehci_hcd 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 1.458214] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.460126] usb usb2: default language 0x0409
[ 1.460131] usb usb2: udev 1, busnum 2, minor = 128
[ 1.460133] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.461994] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.463834] usb usb2: Product: EHCI Host Controller
[ 1.465633] usb usb2: Manufacturer: Linux 3.0.0-rc6 ehci_hcd
[ 1.467422] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.469271] usb usb2: usb_probe_device
[ 1.469273] usb usb2: configuration #1 chosen from 1 choice
[ 1.469279] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 1.469328] hub 2-0:1.0: usb_probe_interface
[ 1.469330] hub 2-0:1.0: usb_probe_interface - got id
[ 1.469331] hub 2-0:1.0: USB hub found
[ 1.471085] hub 2-0:1.0: 3 ports detected
[ 1.472822] hub 2-0:1.0: standalone hub
[ 1.472824] hub 2-0:1.0: no power switching (usb 1.0)
[ 1.472825] hub 2-0:1.0: individual port over-current protection
[ 1.472827] hub 2-0:1.0: power on to power good time: 20ms
[ 1.472830] hub 2-0:1.0: local power source is good
[ 1.472832] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 1.472853] drivers/usb/core/inode.c: creating file '001'
[ 1.472918] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.474639] ohci_hcd: block sizes: ed 64 td 64
[ 1.474689] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.476518] usbcore: registered new interface driver usblp
[ 1.478208] Initializing USB Mass Storage driver...
[ 1.479965] usbcore: registered new interface driver usb-storage
[ 1.481710] USB Mass Storage support registered.
[ 1.483518] usbcore: registered new interface driver libusual
[ 1.485414] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.491577] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.493402] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.495353] mousedev: PS/2 mouse device common for all mice
[ 1.497502] rtc_cmos 00:08: RTC can wake from S4
[ 1.499476] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 1.501325] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.503236] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.505206] Linux video capture interface: v2.00
[ 1.507134] usbcore: registered new interface driver uvcvideo
[ 1.508987] USB Video Class driver (v1.1.0)
[ 1.510899] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.512458] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel at redhat.com
[ 1.513239] cpuidle: using governor ladder
[ 1.518067] cpuidle: using governor menu
[ 1.519834] EFI Variables Facility v0.08 2004-May-17
[ 1.522796] usbcore: registered new interface driver usbhid
[ 1.524575] usbhid: USB HID core driver
[ 1.526749] ALSA device list:
[ 1.528649] No soundcards found.
[ 1.530496] Netfilter messages via NETLINK v0.30.
[ 1.531174] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 1.531178] hub 1-0:1.0: port 1: status 0501 change 0001
[ 1.532279] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.534872] ctnetlink v0.93: registering with nfnetlink.
[ 1.536823] xt_time: kernel timezone is -0000
[ 1.538839] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.540630] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[ 1.542406] arp_tables: (C) 2002 David S. Miller
[ 1.544160] TCP cubic registered
[ 1.545902] Initializing XFRM netlink socket
[ 1.548072] NET: Registered protocol family 10
[ 1.550231] IPv6 over IPv4 tunneling driver
[ 1.552633] NET: Registered protocol family 17
[ 1.554422] Registering the dns_resolver key type
[ 1.556193] Using IPI No-Shortcut mode
[ 1.558381] PM: Checking hibernation image partition /dev/sda1
[ 1.572171] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 1.572179] hub 2-0:1.0: port 1: status 0501 change 0001
[ 1.587206] Refined TSC clocksource calibration: 1994.999 MHz.
[ 1.590182] Switching to clocksource tsc
[ 1.631177] hub 1-0:1.0: state 7 ports 3 chg 0002 evt 0000
[ 1.631190] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 1.644124] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.646544] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.646555] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.648366] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.650393] ata1.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133
[ 1.652255] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.654464] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.654470] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.656319] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.658526] ata1.00: configured for UDMA/133
[ 1.660559] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
[ 1.662779] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.662851] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.668126] sd 0:0:0:0: [sda] Write Protect is off
[ 1.671641] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.671674] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.675596] sda: sda1 sda2 sda3
[ 1.679209] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.682370] ehci_hcd 0000:00:1a.0: port 1 high speed
[ 1.682379] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 1.733211] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 1.786309] ehci_hcd 0000:00:1a.0: port 1 high speed
[ 1.786313] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 1.849233] ehci_hcd 0000:00:1a.0: set dev address 2 for port 1
[ 1.849241] ehci_hcd 0000:00:1a.0: LPM: no device attached
[ 1.849542] usb 1-1: udev 2, busnum 1, minor = 1
[ 1.849547] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.852695] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.855700] usb 1-1: usb_probe_device
[ 1.855706] usb 1-1: configuration #1 chosen from 1 choice
[ 1.855797] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 1.855885] hub 1-1:1.0: usb_probe_interface
[ 1.855890] hub 1-1:1.0: usb_probe_interface - got id
[ 1.855894] hub 1-1:1.0: USB hub found
[ 1.859233] hub 1-1:1.0: 6 ports detected
[ 1.861201] hub 1-1:1.0: standalone hub
[ 1.861203] hub 1-1:1.0: individual port power switching
[ 1.861204] hub 1-1:1.0: individual port over-current protection
[ 1.861206] hub 1-1:1.0: Single TT
[ 1.861207] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 1.861209] hub 1-1:1.0: Port indicators are supported
[ 1.861211] hub 1-1:1.0: power on to power good time: 100ms
[ 1.861482] hub 1-1:1.0: local power source is good
[ 1.861488] hub 1-1:1.0: enabling power on all ports
[ 1.862278] drivers/usb/core/inode.c: creating file '002'
[ 1.862318] hub 2-0:1.0: state 7 ports 3 chg 0002 evt 0000
[ 1.862330] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 1.913240] ehci_hcd 0000:00:1d.0: port 1 high speed
[ 1.913245] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 1.963048] usb 1-1: link qh256-0001/f525bd00 start 1 [1/0 us]
[ 1.963924] usb 2-1: new high speed USB device number 2 using ehci_hcd
[ 1.967010] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.017183] ehci_hcd 0000:00:1d.0: port 1 high speed
[ 2.017191] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 2.062881] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 2.080022] ehci_hcd 0000:00:1d.0: set dev address 2 for port 1
[ 2.080030] ehci_hcd 0000:00:1d.0: LPM: no device attached
[ 2.080352] usb 2-1: udev 2, busnum 2, minor = 129
[ 2.080357] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.082302] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.084401] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input5
[ 2.086460] usb 2-1: usb_probe_device
[ 2.086463] usb 2-1: configuration #1 chosen from 1 choice
[ 2.086538] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
[ 2.086591] hub 2-1:1.0: usb_probe_interface
[ 2.086593] hub 2-1:1.0: usb_probe_interface - got id
[ 2.086595] hub 2-1:1.0: USB hub found
[ 2.088661] hub 2-1:1.0: 8 ports detected
[ 2.090650] hub 2-1:1.0: standalone hub
[ 2.090652] hub 2-1:1.0: individual port power switching
[ 2.090654] hub 2-1:1.0: individual port over-current protection
[ 2.090656] hub 2-1:1.0: Single TT
[ 2.090658] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 2.090659] hub 2-1:1.0: Port indicators are supported
[ 2.090661] hub 2-1:1.0: power on to power good time: 100ms
[ 2.090905] hub 2-1:1.0: local power source is good
[ 2.090910] hub 2-1:1.0: enabling power on all ports
[ 2.091927] drivers/usb/core/inode.c: creating file '002'
[ 2.091953] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0000
[ 2.192795] usb 2-1: link qh256-0001/f58cac00 start 1 [1/0 us]
[ 2.192837] hub 2-1:1.0: state 7 ports 8 chg 0000 evt 0000
[ 2.273835] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.581664] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.584881] PM: Hibernation image partition 8:1 present
[ 2.584885] PM: Looking for hibernation image.
[ 2.585085] PM: Image not found (code -22)
[ 2.585088] PM: Hibernation image not present or could not be loaded.
[ 2.585107] registered taskstats version 1
[ 2.592971] Magic number: 3:661:541
[ 2.602796] EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240)
[ 2.617838] EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (240)
[ 2.635021] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.638454] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[ 2.642100] Freeing unused kernel memory: 392k freed
[ 2.645682] Write protecting the kernel text: 5040k
[ 2.649200] Write protecting the kernel read-only data: 1760k
[ 2.720673] mount used greatest stack depth: 6512 bytes left
[ 2.728385] grep used greatest stack depth: 6372 bytes left
[ 2.759517] sed used greatest stack depth: 6336 bytes left
[ 2.857493] udevadm used greatest stack depth: 6148 bytes left
[ 2.878170] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 2.880422] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 2.882748] thinkpad_acpi: ThinkPad BIOS 6QET52WW (1.22 ), EC 6QHT24WW-1.05
[ 2.885301] thinkpad_acpi: Lenovo ThinkPad X201s, model 5129CTO
[ 2.889873] iwl4965 0000:02:00.0: loaded firmware version 228.61.2.24
[ 2.892466] Registered led device: phy0-led
[ 2.892548] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
[ 2.898176] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 2.900978] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.903492] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 2.903531] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 2.905070] thinkpad_acpi: radio switch found; radios are enabled
[ 2.909758] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 2.922618] Registered led device: tpacpi::thinklight
[ 2.922652] Registered led device: tpacpi::power
[ 2.922671] Registered led device: tpacpi::standby
[ 2.922703] Registered led device: tpacpi::thinkvantage
[ 2.926035] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 2.928747] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 2.932619] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 2.937896] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[ 3.040732] Adding 3903756k swap on /dev/sda1. Priority:-1 extents:1 across:3903756k SS
[ 3.981351] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 3.994276] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 4.001355] mount used greatest stack depth: 6060 bytes left
[ 4.090858] hub 1-1:1.0: hub_suspend
[ 4.090869] usb 1-1: unlink qh256-0001/f525bd00 start 1 [1/0 us]
[ 4.091129] usb 1-1: usb auto-suspend
[ 4.941412] hub 2-1:1.0: hub_suspend
[ 4.941421] usb 2-1: unlink qh256-0001/f58cac00 start 1 [1/0 us]
[ 4.941651] usb 2-1: usb auto-suspend
[ 6.100755] hub 1-0:1.0: hub_suspend
[ 6.100763] usb usb1: bus auto-suspend
[ 6.100767] ehci_hcd 0000:00:1a.0: suspend root hub
[ 6.951244] hub 2-0:1.0: hub_suspend
[ 6.951252] usb usb2: bus auto-suspend
[ 6.951255] ehci_hcd 0000:00:1d.0: suspend root hub
[ 7.092105] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 8.300108] update-mime-dat used greatest stack depth: 6036 bytes left
[ 11.337803] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[ 11.337811] [drm:intel_crt_detect], CRT not detected via hotplug
[ 11.337815] [drm:output_poll_execute], [CONNECTOR:12:VGA-1] status updated from 2 to 2
[ 11.349377] [drm:output_poll_execute], [CONNECTOR:15:HDMI-A-1] status updated from 2 to 2
[ 11.349896] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[ 11.349903] [drm:ironlake_dp_detect], DPCD: 0000
[ 11.349910] [drm:output_poll_execute], [CONNECTOR:18:DP-1] status updated from 2 to 2
-------------- next part --------------
[ 311.047510] [drm:drm_crtc_helper_set_config],
[ 311.047515] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0)
[ 311.047526] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 311.061055] [drm:drm_crtc_helper_set_config],
[ 311.061066] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0)
[ 311.061079] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 311.061086] [drm:drm_crtc_helper_set_config],
[ 311.061092] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
[ 311.061102] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 311.061575] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[4] ENCODERS[4]
[ 311.061590] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[4] ENCODERS[4]
[ 311.061687] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 311.061695] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 311.061717] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 311.061725] [drm:drm_mode_debug_printmodeline], Modeline 21:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa
[ 311.061739] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 311.062116] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[ 311.062127] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[ 311.062137] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[ 311.062145] [drm:intel_crt_detect], CRT not detected via hotplug
[ 311.062152] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected
[ 311.062162] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[ 311.062168] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[ 311.062176] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[ 311.062183] [drm:intel_crt_detect], CRT not detected via hotplug
[ 311.062190] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected
[ 311.062253] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 311.062262] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
[ 311.073858] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
[ 311.073872] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 311.073879] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
[ 311.085409] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
[ 311.085436] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 311.085441] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1]
[ 311.085932] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[ 311.085936] [drm:ironlake_dp_detect], DPCD: 0000
[ 311.085940] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected
[ 311.085945] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 311.085948] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1]
[ 311.086461] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[ 311.086464] [drm:ironlake_dp_detect], DPCD: 0000
[ 311.086467] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected
[ 311.086496] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 311.086501] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 311.086508] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 311.086511] [drm:drm_mode_debug_printmodeline], Modeline 21:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa
[ 311.086521] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 311.087266] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[ 311.087272] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[ 311.087276] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[ 311.087279] [drm:intel_crt_detect], CRT not detected via hotplug
[ 311.087283] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected
[ 311.087287] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[ 311.087290] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[ 311.087294] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[ 311.087297] [drm:intel_crt_detect], CRT not detected via hotplug
[ 311.087300] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected
[ 311.087387] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 311.087396] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
[ 311.098861] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
[ 311.098867] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 311.098870] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
[ 311.110431] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
[ 311.110452] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 311.110456] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1]
[ 311.110989] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[ 311.110993] [drm:ironlake_dp_detect], DPCD: 0000
[ 311.110996] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected
[ 311.111001] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 311.111004] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1]
[ 311.111520] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[ 311.111523] [drm:ironlake_dp_detect], DPCD: 0000
[ 311.111526] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected
[ 311.124869] [drm:drm_mode_addfb], [FB:20]
[ 311.124996] [drm:drm_mode_setcrtc], [CRTC:3]
[ 311.125005] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
[ 311.125011] [drm:drm_crtc_helper_set_config],
[ 311.125016] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
[ 311.125027] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 311.142936] [drm:intel_pipe_set_base_atomic], Writing base 00537000 00000000 0 0 6144
[ 311.142953] [drm:intel_update_fbc],
[ 311.142959] [drm:intel_update_fbc], fbc disabled per module param (default off)
[ 311.194780] [drm:intel_wait_for_vblank], vblank wait timed out
[ 311.733588] [drm:intel_crtc_cursor_set],
[ 312.063932] start_kdeinit (2086): /proc/2086/oom_adj is deprecated, please use /proc/2086/oom_score_adj instead.
-------------- next part --------------
[ 141.056871] [drm:drm_crtc_helper_set_config],
[ 141.056876] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0)
[ 141.056892] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 141.070918] [drm:drm_crtc_helper_set_config],
[ 141.070929] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0)
[ 141.070941] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 141.070949] [drm:drm_crtc_helper_set_config],
[ 141.070955] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
[ 141.070963] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 141.071526] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[4] ENCODERS[4]
[ 141.071542] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[4] ENCODERS[4]
[ 141.071642] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 141.071651] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 141.071676] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 141.071683] [drm:drm_mode_debug_printmodeline], Modeline 21:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa
[ 141.071697] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 141.072079] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[ 141.072095] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[ 141.072108] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[ 141.072121] [drm:intel_crt_detect], CRT not detected via hotplug
[ 141.072141] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected
[ 141.072156] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[ 141.072167] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[ 141.072179] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[ 141.072194] [drm:intel_crt_detect], CRT not detected via hotplug
[ 141.072204] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected
[ 141.072262] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 141.072270] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
[ 141.083834] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
[ 141.083842] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 141.083845] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
[ 141.095438] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
[ 141.095467] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 141.095471] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1]
[ 141.095984] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[ 141.095987] [drm:ironlake_dp_detect], DPCD: 0000
[ 141.095991] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected
[ 141.095995] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 141.095998] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1]
[ 141.096510] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[ 141.096515] [drm:ironlake_dp_detect], DPCD: 0000
[ 141.096518] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected
[ 141.096552] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 141.096556] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 141.096563] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 141.096567] [drm:drm_mode_debug_printmodeline], Modeline 21:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa
[ 141.096573] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 141.097337] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[ 141.097343] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[ 141.097347] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[ 141.097350] [drm:intel_crt_detect], CRT not detected via hotplug
[ 141.097354] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected
[ 141.097358] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[ 141.097361] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[ 141.097364] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[ 141.097368] [drm:intel_crt_detect], CRT not detected via hotplug
[ 141.097371] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected
[ 141.097451] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 141.097460] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
[ 141.108960] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
[ 141.108967] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 141.108971] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
[ 141.120470] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
[ 141.120494] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 141.120554] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1]
[ 141.121073] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[ 141.121083] [drm:ironlake_dp_detect], DPCD: 0000
[ 141.121089] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected
[ 141.121096] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 141.121101] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1]
[ 141.121615] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[ 141.121619] [drm:ironlake_dp_detect], DPCD: 0000
[ 141.121623] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected
[ 141.138087] [drm:drm_mode_addfb], [FB:20]
[ 141.138274] [drm:drm_mode_setcrtc], [CRTC:3]
[ 141.138285] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
[ 141.138292] [drm:drm_crtc_helper_set_config],
[ 141.138298] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
[ 141.138314] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 141.156197] [drm:intel_pipe_set_base_atomic], Writing base 00535000 00000000 0 0 6144
[ 141.156215] [drm:intel_update_fbc],
[ 141.156221] [drm:intel_update_fbc], fbc disabled per module param (default off)
[ 141.208028] [drm:intel_wait_for_vblank], vblank wait timed out
[ 141.777834] [drm:intel_crtc_cursor_set],
[ 142.108871] start_kdeinit (1983): /proc/1983/oom_adj is deprecated, please use /proc/1983/oom_score_adj instead.
[ 143.843382] ata1.00: configured for UDMA/133
[ 143.843394] ata1: EH complete
[ 144.150701] EXT4-fs (sda2): re-mounted. Opts: commit=0
[ 144.160165] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 151.096603] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[ 151.096617] [drm:intel_crt_detect], CRT not detected via hotplug
[ 151.096623] [drm:output_poll_execute], [CONNECTOR:12:VGA-1] status updated from 2 to 2
[ 151.108237] [drm:output_poll_execute], [CONNECTOR:15:HDMI-A-1] status updated from 2 to 2
[ 151.108767] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[ 151.108775] [drm:ironlake_dp_detect], DPCD: 0000
[ 151.108782] [drm:output_poll_execute], [CONNECTOR:18:DP-1] status updated from 2 to 2
[ 154.288554] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 154.288570] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 154.288592] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 154.288599] [drm:drm_mode_debug_printmodeline], Modeline 21:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa
[ 154.288609] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 154.288914] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[ 154.288922] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[ 154.288929] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[ 154.288935] [drm:intel_crt_detect], CRT not detected via hotplug
[ 154.288940] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected
[ 154.288949] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[ 154.288955] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[ 154.288960] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[ 154.288966] [drm:intel_crt_detect], CRT not detected via hotplug
[ 154.288970] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected
[ 154.288980] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 154.288986] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
[ 154.300706] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
[ 154.300740] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 154.300747] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
[ 154.312375] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
[ 154.312422] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 154.312431] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1]
[ 154.312949] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[ 154.312957] [drm:ironlake_dp_detect], DPCD: 0000
[ 154.312964] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected
[ 154.312974] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 154.312980] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1]
[ 154.313499] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[ 154.313508] [drm:ironlake_dp_detect], DPCD: 0000
[ 154.313514] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected
[ 157.364426] [drm:intel_crtc_cursor_set],
[ 157.364439] [drm:intel_crtc_cursor_set], cursor off
[ 157.425282] [drm:drm_crtc_helper_set_config],
[ 157.425287] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0)
[ 157.425300] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 157.425320] [drm:intel_pipe_set_base_atomic], Writing base 00043000 00000000 0 0 5760
[ 157.425327] [drm:intel_update_fbc],
[ 157.425329] [drm:intel_update_fbc], fbc disabled per module param (default off)
[ 157.477037] [drm:intel_wait_for_vblank], vblank wait timed out
[ 157.477042] [drm:drm_crtc_helper_set_config],
[ 157.477045] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
[ 157.477051] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 157.477055] [drm:drm_crtc_helper_set_config],
[ 157.477058] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0)
[ 157.477064] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 157.477081] [drm:drm_crtc_helper_set_config],
[ 157.477083] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0)
[ 157.477089] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 157.488380] [drm:drm_crtc_helper_set_config],
[ 157.488384] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0)
[ 157.488392] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 157.553538] [drm:drm_crtc_helper_set_config],
[ 157.555318] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0)
[ 157.557269] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 157.559124] [drm:drm_crtc_helper_set_config],
[ 157.560892] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
[ 157.562709] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
More information about the dri-devel
mailing list