radeon, Linux 2.6.39: long one minute S3 resume
Paul Menzel
paulepanter at users.sourceforge.net
Fri Jul 8 15:16:26 PDT 2011
Dear Radeon folks,
I hope this is the correct list to report that problem to.
Using Debian Wheezy using `linux-image-2.6.39-2-amd64` resuming from
suspend takes a long time, that means until the GNOME Screensaver(?)
shows up to ask for a password to login.
Looking at `dmesg` I am seeing the following lines.
$ dmesg
[…]
[ 82.280034] wlan0: no IPv6 routers present
[ 1829.798442] wlan0: deauthenticating from 00:11:22:33:44:55 by local choice (reason=3)
[ 1829.820428] cfg80211: Calling CRDA for country: US
[ 1832.274260] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,commit=0
[ 1832.838922] EXT4-fs (dm-3): re-mounted. Opts: commit=0
[ 1833.563403] PM: Syncing filesystems ... done.
[ 1833.571094] PM: Preparing system for mem sleep
[ 1833.644494] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 1833.660156] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 1833.676160] PM: Entering mem sleep
[ 1833.676359] Suspending console(s) (use no_console_suspend to debug)
[ 1833.680983] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1833.702385] brcmsmac 0000:08:00.0: PCI INT A disabled
[ 1833.702432] HDA Intel 0000:00:14.2: PCI INT A disabled
[ 1833.702461] ACPI handle has no context!
[ 1833.702487] ehci_hcd 0000:00:13.2: PCI INT B disabled
[ 1833.702512] ohci_hcd 0000:00:13.1: PCI INT A disabled
[ 1833.702520] ohci_hcd 0000:00:13.0: PCI INT A disabled
[ 1833.702549] ohci_hcd 0000:00:12.1: PCI INT A disabled
[ 1833.702570] ohci_hcd 0000:00:12.0: PCI INT A disabled
[ 1833.707120] sd 0:0:0:0: [sda] Stopping disk
[ 1833.716176] ehci_hcd 0000:00:12.2: PCI INT B disabled
[ 1834.850434] [drm] Disabling audio support
[ 1834.866358] radeon 0000:01:00.0: PCI INT A disabled
[ 1834.880183] PM: suspend of devices complete after 1203.647 msecs
[ 1834.928203] PM: late suspend of devices complete after 48.014 msecs
[ 1834.928248] ACPI: Preparing to enter system sleep state S3
[ 1834.977254] PM: Saving platform NVS memory
[ 1834.987215] Disabling non-boot CPUs ...
[ 1834.988617] CPU 1 is now offline
[ 1834.989141] ACPI: Low-level resume complete
[ 1834.989141] PM: Restoring platform NVS memory
[ 1834.989141] PCI-DMA: Resuming GART IOMMU
[ 1834.989141] PCI-DMA: Restoring GART aperture settings
[ 1834.989141] Enabling non-boot CPUs ...
[ 1834.989141] Booting Node 0 Processor 1 APIC 0x1
[ 1834.989141] smpboot cpu 1: start_ip = 9a000
[ 1835.100161] Switch to broadcast mode on CPU1
[ 1835.104120] Switched to NOHz mode on CPU #1
[ 1835.112375] NMI watchdog enabled, takes one hw-pmu counter.
[ 1835.112573] CPU1 is up
[ 1835.113496] ACPI: Waking up from system sleep state S3
[ 1835.115640] pcieport 0000:00:02.0: restoring config space at offset 0x7 (was 0x20007171, writing 0x7171)
[ 1835.115646] pcieport 0000:00:02.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010)
[ 1835.115650] pcieport 0000:00:02.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 1835.115674] pcieport 0000:00:04.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010)
[ 1835.115678] pcieport 0000:00:04.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 1835.115699] pcieport 0000:00:05.0: restoring config space at offset 0x7 (was 0x1f1, writing 0x200001f1)
[ 1835.115703] pcieport 0000:00:05.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010)
[ 1835.115706] pcieport 0000:00:05.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 1835.115729] pcieport 0000:00:06.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010)
[ 1835.115732] pcieport 0000:00:06.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 1835.115803] ahci 0000:00:11.0: restoring config space at offset 0x1 (was 0x2300003, writing 0x2300407)
[ 1835.128103] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xf2308500-0xf23085ff] (PCI address [0xf2308500-0xf23085ff])
[ 1835.128134] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
[ 1835.144105] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xf2308400-0xf23084ff] (PCI address [0xf2308400-0xf23084ff])
[ 1835.144136] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
[ 1835.144296] radeon 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 1835.144301] radeon 0000:01:00.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100007)
[ 1835.144348] brcmsmac 0000:08:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006)
[ 1835.144487] PM: early resume of devices complete after 28.890 msecs
[ 1835.144660] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1835.144704] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1835.144727] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1835.144787] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1835.144812] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1835.144834] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1835.144857] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1835.144875] radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1835.144881] radeon 0000:01:00.0: setting latency timer to 64
[ 1835.144888] brcmsmac 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1835.144892] brcmsmac 0000:08:00.0: setting latency timer to 64
[ 1835.144931] sd 0:0:0:0: [sda] Starting disk
[ 1835.146807] [drm] Loading RV710 Microcode
[ 1835.436142] usb 2-2: reset high speed USB device number 2 using ehci_hcd
[ 1835.636129] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1835.659085] ata2.00: configured for UDMA/100
[ 1835.712641] usb 5-3: reset full speed USB device number 2 using ohci_hcd
[ 1835.884133] btusb 5-3:1.0: no reset_resume for driver btusb?
[ 1835.884136] btusb 5-3:1.1: no reset_resume for driver btusb?
[ 1837.652115] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1837.761502] ata1.00: configured for UDMA/100
[ 1895.904100] r600_cp: Failed to load firmware "radeon/RV710_pfp.bin"
[ 1895.904103] [drm:rv770_startup] *ERROR* Failed to load firmware!
[ 1895.904105] [drm:rv770_resume] *ERROR* r600 startup failed on resume
[ 1896.968218] PM: resume of devices complete after 61823.672 msecs
[ 1896.968709] PM: Finishing wakeup.
[ 1896.968711] Restarting tasks ... done.
[…]
So there seems to be a long one minute delay before the following
message?
[ 1895.904100] r600_cp: Failed to load firmware "radeon/RV710_pfp.bin"
Is searching for the firmware taking so long? I do not want to install
the firmware being in non-free.
Please find the full output `dmesg` attached and please excuse the
scarce information, since I do not have access to the system right now.
I looked through the Debian problem reports [1] and could not find
anything. Additionally searching for this problem only showed up
information about non working resume systems.
Thanks,
Paul
[1] http://bugs.debian.org/cgi-bin/pkgreport.cgi?ordering=normal;archive=0;src=linux-2.6;dist=unstable;repeatmerged=0
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-2-amd64 (Debian 2.6.39-2) (ben at decadent.org.uk) (gcc version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Wed Jun 8 11:01:04 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.39-2-amd64 root=/dev/mapper/system--1-root ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000de58b000 (usable)
[ 0.000000] BIOS-e820: 00000000de58b000 - 00000000de78b000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000de78b000 - 00000000dfd94000 (usable)
[ 0.000000] BIOS-e820: 00000000dfd94000 - 00000000dfdbf000 (reserved)
[ 0.000000] BIOS-e820: 00000000dfdbf000 - 00000000dfe92000 (usable)
[ 0.000000] BIOS-e820: 00000000dfe92000 - 00000000dfebf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfebf000 - 00000000dfee5000 (usable)
[ 0.000000] BIOS-e820: 00000000dfee5000 - 00000000dfef7000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfef7000 - 00000000dff00000 (usable)
[ 0.000000] BIOS-e820: 00000000f7000000 - 00000000f8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: LENOVO INVALID/Bali, BIOS 2CCN23WW(V1.12) 07/13/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back
[ 0.000000] 3 base 0000FFE00000 mask FFFFFFE00000 write-protect
[ 0.000000] 4 base 000100000000 mask FFFFE0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000120000000 aka 4608M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xdff00 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dff00000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dff00000 page 4k
[ 0.000000] kernel direct mapping tables up to dff00000 @ dfefd000-dff00000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] 0100000000 - 0120000000 page 2M
[ 0.000000] kernel direct mapping tables up to 120000000 @ 11fffe000-120000000
[ 0.000000] RAMDISK: 3792e000 - 37c8f000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000dfef6120 0005C (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 00000000dfef5000 000F4 (v04 LENOVO CB-01 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT 00000000dfee9000 08D5D (v01 LENOVO CB-01 00000001 MSFT 01000013)
[ 0.000000] ACPI: FACS 00000000dfe9c000 00040
[ 0.000000] ACPI: HPET 00000000dfef4000 00038 (v01 LENOVO CB-01 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 00000000dfef3000 00068 (v02 INSYDE AMD CRB 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 00000000dfef2000 0003C (v01 LENOVO CB-01 00000001 MSFT 01000013)
[ 0.000000] ACPI: BOOT 00000000dfee8000 00028 (v01 INSYDE AMD CRB 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 00000000dfee7000 00176 (v01 LENOVO CB-01 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000dfee5000 0052A (v01 AMD PowerNow 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000120000000
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] NODE_DATA [000000011fff9000 - 000000011fffdfff]
[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b600000-ffff88011effffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000de58b
[ 0.000000] 0: 0x000de78b -> 0x000dfd94
[ 0.000000] 0: 0x000dfdbf -> 0x000dfe92
[ 0.000000] 0: 0x000dfebf -> 0x000dfee5
[ 0.000000] 0: 0x000dfef7 -> 0x000dff00
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 1047589
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 898254 pages, LIFO batch:31
[ 0.000000] Normal zone: 1792 pages used for memmap
[ 0.000000] Normal zone: 129280 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x1002a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000de58b000 - 00000000de78b000
[ 0.000000] PM: Registered nosave memory: 00000000dfd94000 - 00000000dfdbf000
[ 0.000000] PM: Registered nosave memory: 00000000dfe92000 - 00000000dfebf000
[ 0.000000] PM: Registered nosave memory: 00000000dfee5000 - 00000000dfef7000
[ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f7000000
[ 0.000000] PM: Registered nosave memory: 00000000f7000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb01000
[ 0.000000] PM: Registered nosave memory: 00000000feb01000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:17100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s83840 r8192 d22656 u1048576
[ 0.000000] pcpu-alloc: s83840 r8192 d22656 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031456
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.39-2-amd64 root=/dev/mapper/system--1-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 3ffe000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000c4000000
[ 0.000000] Memory: 3987188k/4718592k available (3314k kernel code, 528236k absent, 203168k reserved, 3377k data, 596k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2294.437 MHz processor.
[ 0.008003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4588.87 BogoMIPS (lpj=9177748)
[ 0.008008] pid_max: default: 32768 minimum: 301
[ 0.008081] Security Framework initialized
[ 0.008085] SELinux: Disabled at boot.
[ 0.008443] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.012766] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.013402] Mount-cache hash table entries: 256
[ 0.013527] Initializing cgroup subsys ns
[ 0.013530] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.013534] Initializing cgroup subsys cpuacct
[ 0.013538] Initializing cgroup subsys memory
[ 0.013549] Initializing cgroup subsys devices
[ 0.013551] Initializing cgroup subsys freezer
[ 0.013554] Initializing cgroup subsys net_cls
[ 0.013557] Initializing cgroup subsys blkio
[ 0.013594] tseg: 00dff00000
[ 0.013596] CPU: Physical Processor ID: 0
[ 0.013598] CPU: Processor Core ID: 0
[ 0.013600] mce: CPU supports 6 MCE banks
[ 0.013609] using C1E aware idle routine
[ 0.014358] ACPI: Core revision 20110316
[ 0.020058] Setting APIC routing to flat
[ 0.020387] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061022] CPU0: AMD Turion(tm) II Dual-Core Mobile M520 stepping 02
[ 0.064003] Performance Events: AMD PMU driver.
[ 0.064003] ... version: 0
[ 0.064003] ... bit width: 48
[ 0.064003] ... generic registers: 4
[ 0.064003] ... value mask: 0000ffffffffffff
[ 0.064003] ... max period: 00007fffffffffff
[ 0.064003] ... fixed-purpose events: 0
[ 0.064003] ... event mask: 000000000000000f
[ 0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.064003] Booting Node 0, Processors #1 Ok.
[ 0.064003] smpboot cpu 1: start_ip = 9a000
[ 0.152027] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.152031] System has AMD C1E enabled
[ 0.152047] Brought up 2 CPUs
[ 0.152050] Total of 2 processors activated (9177.38 BogoMIPS).
[ 0.152078] Switch to broadcast mode on CPU1
[ 0.152405] Switch to broadcast mode on CPU0
[ 0.152405] devtmpfs: initialized
[ 0.158457] PM: Registering ACPI NVS region at de58b000 (2097152 bytes)
[ 0.158457] PM: Registering ACPI NVS region at dfe92000 (184320 bytes)
[ 0.158457] print_constraints: dummy:
[ 0.158457] NET: Registered protocol family 16
[ 0.158457] node 0 link 0: io port [0, ffffff]
[ 0.158457] TOM: 00000000e0000000 aka 3584M
[ 0.158457] Fam 10h mmconf [f7000000, f7ffffff]
[ 0.158457] node 0 link 0: mmio [a0000, bffff]
[ 0.158457] node 0 link 0: mmio [e0000000, f6ffffff]
[ 0.158457] node 0 link 0: mmio [f7000000, f7ffffff] ==> none
[ 0.158457] node 0 link 0: mmio [f8000000, ffbbffff]
[ 0.158457] TOM2: 0000000120000000 aka 4608M
[ 0.158457] bus: [00, 0f] on node 0 link 0
[ 0.158457] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.158457] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.158457] bus: 00 index 2 [mem 0xe0000000-0xf6ffffff]
[ 0.158457] bus: 00 index 3 [mem 0xf8000000-0xffffffff]
[ 0.158457] bus: 00 index 4 [mem 0x120000000-0xfcffffffff]
[ 0.158457] Extended Config Space enabled on 1 nodes
[ 0.158457] ACPI: bus type pci registered
[ 0.158457] PCI: MMCONFIG for domain 0000 [bus 00-0f] at [mem 0xf7000000-0xf7ffffff] (base 0xf7000000)
[ 0.158457] PCI: MMCONFIG at [mem 0xf7000000-0xf7ffffff] reserved in E820
[ 0.161744] PCI: Using configuration type 1 for base access
[ 0.161840] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.161842] mtrr: probably your BIOS does not setup all CPUs.
[ 0.161844] mtrr: corrected configuration.
[ 0.162117] bio: create slab <bio-0> at 0
[ 0.162117] ACPI: EC: Look up EC in DSDT
[ 0.162117] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.163590] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.180101] ACPI: Interpreter enabled
[ 0.180106] ACPI: (supports S0 S3 S4 S5)
[ 0.180139] ACPI: Using IOAPIC for interrupt routing
[ 0.180565] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.180804] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.214038] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.220161] ACPI: No dock devices found.
[ 0.220165] HEST: Table not found.
[ 0.220169] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.220688] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.221619] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.221622] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.221624] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.221627] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[ 0.221629] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[ 0.221632] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[ 0.221634] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
[ 0.221636] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.221639] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.221641] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.221644] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.221646] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.221648] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 0.221651] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
[ 0.221653] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
[ 0.221656] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xf6ffffff]
[ 0.221658] pci_root PNP0A08:00: host bridge window [mem 0xf8000000-0xffffffff]
[ 0.221677] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
[ 0.221754] pci 0000:00:02.0: [1022:9603] type 1 class 0x000604
[ 0.221780] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.221783] pci 0000:00:02.0: PME# disabled
[ 0.221837] pci 0000:00:04.0: [1022:9604] type 1 class 0x000604
[ 0.221862] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.221864] pci 0000:00:04.0: PME# disabled
[ 0.221878] pci 0000:00:05.0: [1022:9605] type 1 class 0x000604
[ 0.221902] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.221905] pci 0000:00:05.0: PME# disabled
[ 0.221918] pci 0000:00:06.0: [1022:9606] type 1 class 0x000604
[ 0.221942] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.221945] pci 0000:00:06.0: PME# disabled
[ 0.222002] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.222022] pci 0000:00:11.0: reg 10: [io 0x8038-0x803f]
[ 0.222032] pci 0000:00:11.0: reg 14: [io 0x804c-0x804f]
[ 0.222041] pci 0000:00:11.0: reg 18: [io 0x8030-0x8037]
[ 0.222051] pci 0000:00:11.0: reg 1c: [io 0x8048-0x804b]
[ 0.222061] pci 0000:00:11.0: reg 20: [io 0x8010-0x801f]
[ 0.222071] pci 0000:00:11.0: reg 24: [mem 0xf2308000-0xf23083ff]
[ 0.222118] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.222131] pci 0000:00:12.0: reg 10: [mem 0xf2307000-0xf2307fff]
[ 0.222195] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[ 0.222208] pci 0000:00:12.1: reg 10: [mem 0xf2306000-0xf2306fff]
[ 0.222277] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.223492] pci 0000:00:12.2: reg 10: [mem 0xf2308500-0xf23085ff]
[ 0.230360] pci 0000:00:12.2: supports D1 D2
[ 0.230365] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.230370] pci 0000:00:12.2: PME# disabled
[ 0.230403] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.230418] pci 0000:00:13.0: reg 10: [mem 0xf2305000-0xf2305fff]
[ 0.230481] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[ 0.230495] pci 0000:00:13.1: reg 10: [mem 0xf2304000-0xf2304fff]
[ 0.230564] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.231742] pci 0000:00:13.2: reg 10: [mem 0xf2308400-0xf23084ff]
[ 0.238358] pci 0000:00:13.2: supports D1 D2
[ 0.238362] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.238367] pci 0000:00:13.2: PME# disabled
[ 0.238405] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.238500] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.238522] pci 0000:00:14.2: reg 10: [mem 0xf2300000-0xf2303fff 64bit]
[ 0.238579] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.238583] pci 0000:00:14.2: PME# disabled
[ 0.238597] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.238672] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.238717] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.238732] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.238745] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.238758] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.238773] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.238823] pci 0000:01:00.0: [1002:9555] type 0 class 0x000300
[ 0.238833] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff pref]
[ 0.238840] pci 0000:01:00.0: reg 14: [io 0x7000-0x70ff]
[ 0.238847] pci 0000:01:00.0: reg 18: [mem 0xf2200000-0xf220ffff]
[ 0.238869] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.238886] pci 0000:01:00.0: supports D1 D2
[ 0.248048] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.248054] pci 0000:00:02.0: bridge window [io 0x7000-0x7fff]
[ 0.248057] pci 0000:00:02.0: bridge window [mem 0xf2200000-0xf22fffff]
[ 0.248061] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.248090] pci 0000:00:04.0: PCI bridge to [bus 02-07]
[ 0.248093] pci 0000:00:04.0: bridge window [io 0x3000-0x6fff]
[ 0.248096] pci 0000:00:04.0: bridge window [mem 0xf1200000-0xf21fffff]
[ 0.248100] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf0ffffff 64bit pref]
[ 0.248147] pci 0000:08:00.0: [14e4:4727] type 0 class 0x000280
[ 0.248167] pci 0000:08:00.0: reg 10: [mem 0xf1100000-0xf1103fff 64bit]
[ 0.248239] pci 0000:08:00.0: supports D1 D2
[ 0.248241] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[ 0.248245] pci 0000:08:00.0: PME# disabled
[ 0.260054] pci 0000:00:05.0: PCI bridge to [bus 08-08]
[ 0.260060] pci 0000:00:05.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled)
[ 0.260064] pci 0000:00:05.0: bridge window [mem 0xf1100000-0xf11fffff]
[ 0.260068] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.260117] pci 0000:09:00.0: [1969:1062] type 0 class 0x000200
[ 0.260139] pci 0000:09:00.0: reg 10: [mem 0xf1000000-0xf103ffff 64bit]
[ 0.260150] pci 0000:09:00.0: reg 18: [io 0x2000-0x207f]
[ 0.260219] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.260224] pci 0000:09:00.0: PME# disabled
[ 0.272052] pci 0000:00:06.0: PCI bridge to [bus 09-09]
[ 0.272058] pci 0000:00:06.0: bridge window [io 0x2000-0x2fff]
[ 0.272061] pci 0000:00:06.0: bridge window [mem 0xf1000000-0xf10fffff]
[ 0.272065] pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.272132] pci 0000:00:14.4: PCI bridge to [bus 0a-0a] (subtractive decode)
[ 0.272136] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
[ 0.272141] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.272146] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.272149] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.272152] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.272154] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.272157] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.272160] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.272162] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.272165] pci 0000:00:14.4: bridge window [mem 0x000cc000-0x000cffff] (subtractive decode)
[ 0.272168] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.272170] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.272173] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.272176] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.272178] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.272182] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.272185] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.272188] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 0.272190] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf6ffffff] (subtractive decode)
[ 0.272193] pci 0000:00:14.4: bridge window [mem 0xf8000000-0xffffffff] (subtractive decode)
[ 0.272214] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.272364] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2_._PRT]
[ 0.272429] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[ 0.272479] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 0.272524] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 0.272605] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.272695] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.272697] Unable to assume _OSC PCIe control. Disabling ASPM
[ 0.279242] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.279286] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.279326] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.279365] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.279404] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.279442] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.279481] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.279520] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.279628] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.279632] vgaarb: loaded
[ 0.279666] PCI: Using ACPI for IRQ routing
[ 0.279669] PCI: pci_cache_line_size set to 64 bytes
[ 0.279787] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.279790] reserve RAM buffer: 00000000de58b000 - 00000000dfffffff
[ 0.279794] reserve RAM buffer: 00000000dfd94000 - 00000000dfffffff
[ 0.279798] reserve RAM buffer: 00000000dfe92000 - 00000000dfffffff
[ 0.279802] reserve RAM buffer: 00000000dfee5000 - 00000000dfffffff
[ 0.279804] reserve RAM buffer: 00000000dff00000 - 00000000dfffffff
[ 0.279945] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.279949] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.281062] Switching to clocksource hpet
[ 0.284024] pnp: PnP ACPI init
[ 0.284024] ACPI: bus type pnp registered
[ 0.284024] pnp 00:00: [bus 00-ff]
[ 0.284024] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.284024] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.284024] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.284024] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.284024] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.286000] Switched to NOHz mode on CPU #1
[ 0.286005] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.286008] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.286013] Switched to NOHz mode on CPU #0
[ 0.286016] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.286019] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.286022] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.286025] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.286028] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.286031] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.286033] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.286036] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.286038] pnp 00:00: [mem 0xe0000000-0xf6ffffff window]
[ 0.286041] pnp 00:00: [mem 0xf8000000-0xffffffff window]
[ 0.286043] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.286107] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.286350] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.286352] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.286354] pnp 00:01: [mem 0xf7000000-0xf7ffffff]
[ 0.286410] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.286413] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.286416] system 00:01: [mem 0xf7000000-0xf7ffffff] has been reserved
[ 0.286419] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.286538] pnp 00:02: [io 0x0000-0x000f]
[ 0.286540] pnp 00:02: [io 0x0081-0x008f]
[ 0.286542] pnp 00:02: [io 0x00c0-0x00df]
[ 0.286545] pnp 00:02: [dma 4]
[ 0.286572] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.286580] pnp 00:03: [io 0x00f0-0x00fe]
[ 0.286623] pnp 00:03: [irq 13]
[ 0.286650] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.286719] pnp 00:04: [io 0x0070-0x0071]
[ 0.286744] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.286752] pnp 00:05: [io 0x0061]
[ 0.286779] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.286789] pnp 00:06: [io 0x0060]
[ 0.286791] pnp 00:06: [io 0x0064]
[ 0.286829] pnp 00:06: [irq 1]
[ 0.286855] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.286866] pnp 00:07: [irq 12]
[ 0.286894] pnp 00:07: Plug and Play ACPI device, IDs SYN0718 SYN0700 SYN0002 PNP0f13 (active)
[ 0.286905] pnp 00:08: [io 0x0010-0x001f]
[ 0.286908] pnp 00:08: [io 0x002e-0x002f]
[ 0.286910] pnp 00:08: [io 0x0072-0x0073]
[ 0.286912] pnp 00:08: [io 0x0080]
[ 0.286914] pnp 00:08: [io 0x00b0-0x00b1]
[ 0.286916] pnp 00:08: [io 0x0092]
[ 0.286918] pnp 00:08: [io 0x0400-0x04cf]
[ 0.286920] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.286922] pnp 00:08: [io 0x04d6]
[ 0.286924] pnp 00:08: [io 0x0680-0x06ff]
[ 0.286926] pnp 00:08: [io 0x077a]
[ 0.286928] pnp 00:08: [io 0x0c00-0x0c01]
[ 0.286930] pnp 00:08: [io 0x0c14]
[ 0.286932] pnp 00:08: [io 0x0c50-0x0c52]
[ 0.286934] pnp 00:08: [io 0x0c6c]
[ 0.286936] pnp 00:08: [io 0x0c6f]
[ 0.286938] pnp 00:08: [io 0x0cd0-0x0cdb]
[ 0.286993] system 00:08: [io 0x0400-0x04cf] has been reserved
[ 0.286995] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.286998] system 00:08: [io 0x04d6] has been reserved
[ 0.287001] system 00:08: [io 0x0680-0x06ff] has been reserved
[ 0.287003] system 00:08: [io 0x077a] has been reserved
[ 0.287006] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.287009] system 00:08: [io 0x0c14] has been reserved
[ 0.287011] system 00:08: [io 0x0c50-0x0c52] has been reserved
[ 0.287014] system 00:08: [io 0x0c6c] has been reserved
[ 0.287017] system 00:08: [io 0x0c6f] has been reserved
[ 0.287019] system 00:08: [io 0x0cd0-0x0cdb] has been reserved
[ 0.287022] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.287066] pnp 00:09: [mem 0x000e0000-0x000fffff]
[ 0.287068] pnp 00:09: [mem 0xffe00000-0xffffffff]
[ 0.287113] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.287116] system 00:09: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.287119] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.301196] pnp: PnP ACPI: found 10 devices
[ 0.301200] ACPI: ACPI bus type pnp unregistered
[ 0.307415] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.307489] pci 0000:01:00.0: BAR 6: assigned [mem 0xf2220000-0xf223ffff pref]
[ 0.307492] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.307495] pci 0000:00:02.0: bridge window [io 0x7000-0x7fff]
[ 0.307498] pci 0000:00:02.0: bridge window [mem 0xf2200000-0xf22fffff]
[ 0.307501] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.307505] pci 0000:00:04.0: PCI bridge to [bus 02-07]
[ 0.307508] pci 0000:00:04.0: bridge window [io 0x3000-0x6fff]
[ 0.307511] pci 0000:00:04.0: bridge window [mem 0xf1200000-0xf21fffff]
[ 0.307514] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf0ffffff 64bit pref]
[ 0.307518] pci 0000:00:05.0: PCI bridge to [bus 08-08]
[ 0.307520] pci 0000:00:05.0: bridge window [io disabled]
[ 0.307523] pci 0000:00:05.0: bridge window [mem 0xf1100000-0xf11fffff]
[ 0.307526] pci 0000:00:05.0: bridge window [mem pref disabled]
[ 0.307529] pci 0000:00:06.0: PCI bridge to [bus 09-09]
[ 0.307532] pci 0000:00:06.0: bridge window [io 0x2000-0x2fff]
[ 0.307535] pci 0000:00:06.0: bridge window [mem 0xf1000000-0xf10fffff]
[ 0.307538] pci 0000:00:06.0: bridge window [mem pref disabled]
[ 0.307541] pci 0000:00:14.4: PCI bridge to [bus 0a-0a]
[ 0.307543] pci 0000:00:14.4: bridge window [io disabled]
[ 0.307582] pci 0000:00:14.4: bridge window [mem disabled]
[ 0.307586] pci 0000:00:14.4: bridge window [mem pref disabled]
[ 0.307607] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.307611] pci 0000:00:02.0: setting latency timer to 64
[ 0.307618] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.307621] pci 0000:00:04.0: setting latency timer to 64
[ 0.307629] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.307632] pci 0000:00:05.0: setting latency timer to 64
[ 0.307636] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.307639] pci 0000:00:06.0: setting latency timer to 64
[ 0.307647] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.307649] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.307651] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.307654] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.307656] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.307658] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.307661] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.307663] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.307665] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.307667] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.307670] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.307672] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.307674] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.307677] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.307679] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 0.307681] pci_bus 0000:00: resource 19 [mem 0xe0000000-0xf6ffffff]
[ 0.307683] pci_bus 0000:00: resource 20 [mem 0xf8000000-0xffffffff]
[ 0.307686] pci_bus 0000:01: resource 0 [io 0x7000-0x7fff]
[ 0.307688] pci_bus 0000:01: resource 1 [mem 0xf2200000-0xf22fffff]
[ 0.307691] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.307693] pci_bus 0000:02: resource 0 [io 0x3000-0x6fff]
[ 0.307695] pci_bus 0000:02: resource 1 [mem 0xf1200000-0xf21fffff]
[ 0.307698] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf0ffffff 64bit pref]
[ 0.307700] pci_bus 0000:08: resource 1 [mem 0xf1100000-0xf11fffff]
[ 0.307703] pci_bus 0000:09: resource 0 [io 0x2000-0x2fff]
[ 0.307705] pci_bus 0000:09: resource 1 [mem 0xf1000000-0xf10fffff]
[ 0.307707] pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7]
[ 0.307710] pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff]
[ 0.307712] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.307714] pci_bus 0000:0a: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.307716] pci_bus 0000:0a: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.307719] pci_bus 0000:0a: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.307721] pci_bus 0000:0a: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.307723] pci_bus 0000:0a: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.307726] pci_bus 0000:0a: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.307728] pci_bus 0000:0a: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.307730] pci_bus 0000:0a: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.307732] pci_bus 0000:0a: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.307735] pci_bus 0000:0a: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.307737] pci_bus 0000:0a: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.307739] pci_bus 0000:0a: resource 18 [mem 0x000ec000-0x000effff]
[ 0.307742] pci_bus 0000:0a: resource 19 [mem 0xe0000000-0xf6ffffff]
[ 0.307744] pci_bus 0000:0a: resource 20 [mem 0xf8000000-0xffffffff]
[ 0.307868] NET: Registered protocol family 2
[ 0.308059] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.309280] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.311943] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.312295] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.312298] TCP reno registered
[ 0.312313] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.312347] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.312544] NET: Registered protocol family 1
[ 0.488138] pci 0000:01:00.0: Boot video device
[ 0.488151] PCI: CLS 64 bytes, default 64
[ 0.488199] Unpacking initramfs...
[ 0.562214] Freeing initrd memory: 3460k freed
[ 0.564537] PCI-DMA: Disabling AGP.
[ 0.564659] PCI-DMA: aperture base @ c0000000 size 65536 KB
[ 0.564661] PCI-DMA: using GART IOMMU.
[ 0.564664] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.567690] Simple Boot Flag at 0x44 set to 0x1
[ 0.568251] audit: initializing netlink socket (disabled)
[ 0.568265] type=2000 audit(1310109985.568:1): initialized
[ 0.579992] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.580865] VFS: Disk quotas dquot_6.5.2
[ 0.580920] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.581035] msgmni has been set to 7923
[ 0.581248] alg: No test for stdrng (krng)
[ 0.581308] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.581312] io scheduler noop registered
[ 0.581314] io scheduler deadline registered
[ 0.581335] io scheduler cfq registered (default)
[ 0.581544] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.581576] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.581710] pcieport 0000:00:04.0: setting latency timer to 64
[ 0.581732] pcieport 0000:00:04.0: irq 41 for MSI/MSI-X
[ 0.581864] pcieport 0000:00:05.0: setting latency timer to 64
[ 0.581886] pcieport 0000:00:05.0: irq 42 for MSI/MSI-X
[ 0.582018] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.582040] pcieport 0000:00:06.0: irq 43 for MSI/MSI-X
[ 0.582264] ERST: Table is not found!
[ 0.582341] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.636352] Linux agpgart interface v0.103
[ 0.636441] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.654594] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.654602] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.654702] mousedev: PS/2 mouse device common for all mice
[ 0.655119] rtc_cmos 00:04: RTC can wake from S4
[ 0.655303] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.655365] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 0.655382] cpuidle: using governor ladder
[ 0.655384] cpuidle: using governor menu
[ 0.655657] TCP cubic registered
[ 0.655763] NET: Registered protocol family 10
[ 0.656410] Mobile IPv6
[ 0.656413] NET: Registered protocol family 17
[ 0.656417] Registering the dns_resolver key type
[ 0.656533] PM: Hibernation image not present or could not be loaded.
[ 0.656545] registered taskstats version 1
[ 0.657126] rtc_cmos 00:04: setting system clock to 2011-07-08 07:26:26 UTC (1310109986)
[ 0.657174] Initializing network drop monitor service
[ 0.658294] Freeing unused kernel memory: 596k freed
[ 0.658455] Write protecting the kernel read-only data: 6144k
[ 0.661965] Freeing unused kernel memory: 764k freed
[ 0.665688] Freeing unused kernel memory: 772k freed
[ 0.672141] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.689655] udevd[78]: starting version 171
[ 0.740737] SCSI subsystem initialized
[ 0.784133] ACPI: Invalid active0 threshold
[ 0.786657] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.786660] ACPI: Thermal Zone [THRM] (41 C)
[ 0.788807] ACPI: Invalid active0 threshold
[ 0.791463] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.791466] ACPI: Thermal Zone [THR1] (0 C)
[ 0.792768] libata version 3.00 loaded.
[ 0.798827] ahci 0000:00:11.0: version 3.0
[ 0.798855] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.798910] ahci 0000:00:11.0: irq 44 for MSI/MSI-X
[ 0.798988] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.798992] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part ccc sxs
[ 0.799356] scsi0 : ahci
[ 0.799470] scsi1 : ahci
[ 0.799550] ata1: SATA max UDMA/133 abar m1024 at 0xf2308000 port 0xf2308100 irq 44
[ 0.799554] ata2: SATA max UDMA/133 abar m1024 at 0xf2308000 port 0xf2308180 irq 44
[ 1.288121] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.288155] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.289922] ata1.00: ATA-8: FUJITSU MJA2500BH G2, 0084001C, max UDMA/100
[ 1.289926] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.291722] ata1.00: configured for UDMA/100
[ 1.291991] scsi 0:0:0:0: Direct-Access ATA FUJITSU MJA2500B 0084 PQ: 0 ANSI: 5
[ 1.299065] ata2.00: ATAPI: Optiarc DVD RW AD-7585H, K822, max UDMA/100
[ 1.311087] ata2.00: configured for UDMA/100
[ 1.314450] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7585H K822 PQ: 0 ANSI: 5
[ 1.321773] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.322063] sd 0:0:0:0: [sda] Write Protect is off
[ 1.322067] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.322083] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.359244] sda: sda1 sda2 < sda5 >
[ 1.359733] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.564110] Refined TSC clocksource calibration: 2294.249 MHz.
[ 1.564124] Switching to clocksource tsc
[ 1.671555] device-mapper: uevent: version 1.0.3
[ 1.671626] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel at redhat.com
[ 6.872111] PM: Starting manual resume from disk
[ 6.872116] PM: Hibernation image partition 254:2 present
[ 6.872117] PM: Looking for hibernation image.
[ 6.872484] PM: Image not found (code -22)
[ 6.872487] PM: Hibernation image not present or could not be loaded.
[ 6.975735] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 8.564867] udevd[354]: starting version 171
[ 9.612028] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 9.612036] ACPI: Power Button [PWRB]
[ 9.612088] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 9.612091] ACPI: Sleep Button [SLPB]
[ 9.612160] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 9.612236] ACPI: Lid Switch [LID]
[ 9.612285] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 9.612289] ACPI: Power Button [PWRF]
[ 9.748391] ACPI: acpi_idle registered with cpuidle
[ 9.748753] ACPI: processor limited to max C-state 1
[ 9.751378] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 9.754648] acpi device:06: registered as cooling_device2
[ 9.754721] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:04/LNXVIDEO:01/input/input5
[ 9.754727] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 9.891897] ACPI: AC Adapter [AC] (off-line)
[ 9.919012] cfg80211: Calling CRDA to update world regulatory domain
[ 10.048703] atl1c 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.048714] atl1c 0000:09:00.0: setting latency timer to 64
[ 10.118638] usbcore: registered new interface driver usbfs
[ 10.118795] usbcore: registered new interface driver hub
[ 10.118833] usbcore: registered new device driver usb
[ 10.139891] MCE: In-kernel MCE decoding enabled.
[ 10.152694] atl1c 0000:09:00.0: version 1.0.1.0-NAPI
[ 10.173085] ACPI: Battery Slot [BAT0] (battery present)
[ 10.176632] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.179403] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 10.179424] ehci_hcd 0000:00:12.2: setting latency timer to 64
[ 10.179428] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 10.179457] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 10.192564] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 10.192600] ehci_hcd 0000:00:12.2: debug port 1
[ 10.192630] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf2308500
[ 10.204181] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 10.204210] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.204213] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.204215] usb usb1: Product: EHCI Host Controller
[ 10.204217] usb usb1: Manufacturer: Linux 2.6.39-2-amd64 ehci_hcd
[ 10.204219] usb usb1: SerialNumber: 0000:00:12.2
[ 10.204356] hub 1-0:1.0: USB hub found
[ 10.204361] hub 1-0:1.0: 6 ports detected
[ 10.204584] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 10.204622] ehci_hcd 0000:00:13.2: setting latency timer to 64
[ 10.204626] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 10.204638] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 10.216179] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 10.216212] ehci_hcd 0000:00:13.2: debug port 1
[ 10.216238] ehci_hcd 0000:00:13.2: irq 19, io mem 0xf2308400
[ 10.228113] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 10.228141] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.228144] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.228146] usb usb2: Product: EHCI Host Controller
[ 10.228148] usb usb2: Manufacturer: Linux 2.6.39-2-amd64 ehci_hcd
[ 10.228150] usb usb2: SerialNumber: 0000:00:13.2
[ 10.228284] hub 2-0:1.0: USB hub found
[ 10.228288] hub 2-0:1.0: 6 ports detected
[ 10.323423] EDAC MC: Ver: 2.1.0 Jun 8 2011
[ 10.374883] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 10.409097] AMD64 EDAC driver v3.4.0
[ 10.409220] EDAC amd64: DRAM ECC disabled.
[ 10.409228] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 10.409229] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 10.409231] (Note that use of the override may cause unknown side effects.)
[ 10.435668] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 10.435673] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 10.435820] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 10.444641] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 10.447710] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.447741] ohci_hcd 0000:00:12.0: setting latency timer to 64
[ 10.447745] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 10.447925] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 10.456396] ohci_hcd 0000:00:12.0: irq 16, io mem 0xf2307000
[ 10.480422] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6
[ 10.507435] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7
[ 10.516115] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.516119] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.516122] usb usb3: Product: OHCI Host Controller
[ 10.516124] usb usb3: Manufacturer: Linux 2.6.39-2-amd64 ohci_hcd
[ 10.516126] usb usb3: SerialNumber: 0000:00:12.0
[ 10.516146] usb 1-3: new high speed USB device number 2 using ehci_hcd
[ 10.516265] hub 3-0:1.0: USB hub found
[ 10.516274] hub 3-0:1.0: 3 ports detected
[ 10.516407] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.516446] ohci_hcd 0000:00:12.1: setting latency timer to 64
[ 10.516449] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 10.516458] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 10.532171] ohci_hcd 0000:00:12.1: irq 16, io mem 0xf2306000
[ 10.559863] usbcore: registered new interface driver usbserial
[ 10.559876] USB Serial support registered for generic
[ 10.575718] input: Ideapad extra buttons as /devices/platform/ideapad/input/input8
[ 10.575893] brcmsmac: module is from the staging directory, the quality is unknown, you have been warned.
[ 10.580632] brcmsmac 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 10.580640] brcmsmac 0000:08:00.0: setting latency timer to 64
[ 10.596137] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.596141] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.596143] usb usb4: Product: OHCI Host Controller
[ 10.596145] usb usb4: Manufacturer: Linux 2.6.39-2-amd64 ohci_hcd
[ 10.596147] usb usb4: SerialNumber: 0000:00:12.1
[ 10.596291] hub 4-0:1.0: USB hub found
[ 10.596297] hub 4-0:1.0: 3 ports detected
[ 10.596461] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.596497] ohci_hcd 0000:00:13.0: setting latency timer to 64
[ 10.596500] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 10.596509] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 10.611585] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 10.612260] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 10.616169] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf2305000
[ 10.674790] [drm] Initialized drm 1.1.0 20060810
[ 10.680080] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.680084] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.680087] usb usb5: Product: OHCI Host Controller
[ 10.680089] usb usb5: Manufacturer: Linux 2.6.39-2-amd64 ohci_hcd
[ 10.680091] usb usb5: SerialNumber: 0000:00:13.0
[ 10.680239] hub 5-0:1.0: USB hub found
[ 10.680246] hub 5-0:1.0: 3 ports detected
[ 10.680379] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.680425] ohci_hcd 0000:00:13.1: setting latency timer to 64
[ 10.680428] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 10.680439] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 10.696127] ohci_hcd 0000:00:13.1: irq 18, io mem 0xf2304000
[ 10.756077] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.756080] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.756083] usb usb6: Product: OHCI Host Controller
[ 10.756085] usb usb6: Manufacturer: Linux 2.6.39-2-amd64 ohci_hcd
[ 10.756087] usb usb6: SerialNumber: 0000:00:13.1
[ 10.756231] hub 6-0:1.0: USB hub found
[ 10.756238] hub 6-0:1.0: 3 ports detected
[ 10.904827] usb 1-3: New USB device found, idVendor=0bda, idProduct=0138
[ 10.904831] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 10.904834] usb 1-3: Product: USB2.0-CRW
[ 10.904835] usb 1-3: Manufacturer: Generic
[ 10.904837] usb 1-3: SerialNumber: 20090516388200000
[ 11.020106] usb 2-2: new high speed USB device number 2 using ehci_hcd
[ 11.076394] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.076435] HDA Intel 0000:00:14.2: setting latency timer to 64
[ 11.082759] [drm] radeon kernel modesetting enabled.
[ 11.082887] radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 11.082893] radeon 0000:01:00.0: setting latency timer to 64
[ 11.083096] [drm] initializing kernel modesetting (RV710 0x1002:0x9555).
[ 11.083131] [drm] register mmio base: 0xF2200000
[ 11.083133] [drm] register mmio size: 65536
[ 11.088847] ATOM BIOS: BR35193.001
[ 11.088878] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 11.088881] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 11.089022] [drm] Detected VRAM RAM=512M, BAR=256M
[ 11.089026] [drm] RAM width 64bits DDR
[ 11.089102] [TTM] Zone kernel: Available graphics memory: 2029366 kiB.
[ 11.089104] [TTM] Initializing pool allocator.
[ 11.089130] [drm] radeon: 512M of VRAM memory ready
[ 11.089132] [drm] radeon: 512M of GTT memory ready.
[ 11.089152] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 11.089154] [drm] Driver supports precise vblank timestamp query.
[ 11.089193] radeon 0000:01:00.0: irq 45 for MSI/MSI-X
[ 11.089199] radeon 0000:01:00.0: radeon: using MSI.
[ 11.089231] [drm] radeon: irq initialized.
[ 11.089235] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 11.090229] [drm] Loading RV710 Microcode
[ 11.161643] usb 2-2: New USB device found, idVendor=090c, idProduct=37b1
[ 11.161647] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=2
[ 11.161650] usb 2-2: Product: Lenovo EasyCamera
[ 11.161652] usb 2-2: Manufacturer: Image Processor
[ 11.161653] usb 2-2: SerialNumber: Lenovo EasyCamera
[ 11.244903] r600_cp: Failed to load firmware "radeon/RV710_pfp.bin"
[ 11.244955] [drm:rv770_startup] *ERROR* Failed to load firmware!
[ 11.245000] radeon 0000:01:00.0: disabling GPU acceleration
[ 11.260964] radeon 0000:01:00.0: ffff880119381000 unpin not necessary
[ 11.260967] radeon 0000:01:00.0: ffff880119381000 unpin not necessary
[ 11.260979] [drm] Enabling audio support
[ 11.261258] [drm] Radeon Display Connectors
[ 11.261260] [drm] Connector 0:
[ 11.261261] [drm] LVDS
[ 11.261263] [drm] DDC: 0x7f68 0x7f68 0x7f6c 0x7f6c 0x7f70 0x7f70 0x7f74 0x7f74
[ 11.261265] [drm] Encoders:
[ 11.261267] [drm] LCD1: INTERNAL_UNIPHY2
[ 11.261268] [drm] Connector 1:
[ 11.261269] [drm] VGA
[ 11.261271] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 11.261273] [drm] Encoders:
[ 11.261275] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 11.326477] [drm] radeon: power management initialized
[ 11.328161] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input9
[ 11.438831] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 11.540109] usb 5-3: new full speed USB device number 2 using ohci_hcd
[ 11.727128] usb 5-3: New USB device found, idVendor=0a5c, idProduct=2150
[ 11.727132] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 11.727135] usb 5-3: Product: BCM2046 Bluetooth Device
[ 11.727137] usb 5-3: Manufacturer: Broadcom Corp
[ 11.727139] usb 5-3: SerialNumber: F07BCBC2A7EB
[ 11.729451] usbcore: registered new interface driver usbserial_generic
[ 11.729455] usbserial: USB Serial Driver core
[ 11.754688] USB Serial support registered for GSM modem (1-port)
[ 11.754781] usbcore: registered new interface driver option
[ 11.754783] option: v0.7.2:USB Driver for GSM modems
[ 11.783220] [drm] fb mappable at 0xE0040000
[ 11.783223] [drm] vram apper at 0xE0000000
[ 11.783224] [drm] size 4325376
[ 11.783226] [drm] fb depth is 24
[ 11.783227] [drm] pitch is 5632
[ 11.783316] fbcon: radeondrmfb (fb0) is primary device
[ 11.860058] Linux media interface: v0.10
[ 11.879216] Linux video capture interface: v2.00
[ 11.936849] Bluetooth: Core ver 2.16
[ 11.936880] NET: Registered protocol family 31
[ 11.936881] Bluetooth: HCI device and connection manager initialized
[ 11.936884] Bluetooth: HCI socket layer initialized
[ 11.936886] Bluetooth: L2CAP socket layer initialized
[ 11.937021] Bluetooth: SCO socket layer initialized
[ 11.966896] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 11.969586] usbcore: registered new interface driver btusb
[ 12.010591] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (090c:37b1)
[ 12.011766] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input10
[ 12.011828] usbcore: registered new interface driver uvcvideo
[ 12.011830] USB Video Class driver (v1.0.0)
[ 12.015938] usbcore: registered new interface driver uas
[ 12.047838] Console: switching to colour frame buffer device 170x48
[ 12.051521] fb0: radeondrmfb frame buffer device
[ 12.051522] drm: registered panic notifier
[ 12.051534] [drm] Initialized radeon 2.9.0 20080528 for 0000:01:00.0 on minor 0
[ 12.062266] Initializing USB Mass Storage driver...
[ 12.062384] scsi2 : usb-storage 1-3:1.0
[ 12.062488] usbcore: registered new interface driver usb-storage
[ 12.062490] USB Mass Storage support registered.
[ 13.063134] scsi 2:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 13.063666] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 13.071347] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 13.437632] EXT4-fs (dm-1): re-mounted. Opts: (null)
[ 13.625136] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 13.940975] loop: module loaded
[ 14.481673] Adding 7925756k swap on /dev/mapper/system--1-swap_1. Priority:-1 extents:1 across:7925756k
[ 14.989383] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 15.767449] fuse init (API version 7.16)
[ 17.318168] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11
[ 19.418295] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.421271] atl1c 0000:09:00.0: irq 45 for MSI/MSI-X
[ 19.480900] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.951405] lp: driver loaded but no devices found
[ 22.284526] ppdev: user-space parallel port driver
[ 23.829827] powernow-k8: Found 1 AMD Turion(tm) II Dual-Core Mobile M520 (2 cpu cores) (version 2.20.00)
[ 23.829875] powernow-k8: 0 : pstate 0 (2300 MHz)
[ 23.829877] powernow-k8: 1 : pstate 1 (2100 MHz)
[ 23.829879] powernow-k8: 2 : pstate 2 (1500 MHz)
[ 23.829881] powernow-k8: 3 : pstate 3 (1100 MHz)
[ 23.829882] powernow-k8: 4 : pstate 4 (800 MHz)
[ 30.982426] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,commit=600
[ 30.986988] EXT4-fs (dm-3): re-mounted. Opts: commit=600
[ 72.027724] wlan0: authenticate with 00:11:22:33:44:55 (try 1)
[ 72.030018] wlan0: authenticated
[ 72.030077] wlan0: associate with 00:11:22:33:44:55 (try 1)
[ 72.033601] wlan0: RX AssocResp from 00:11:22:33:44:55 (capab=0x431 status=0 aid=1)
[ 72.033611] wlan0: associated
[ 72.036138] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 82.280034] wlan0: no IPv6 routers present
[ 1829.798442] wlan0: deauthenticating from 00:11:22:33:44:55 by local choice (reason=3)
[ 1829.820428] cfg80211: Calling CRDA for country: US
[ 1832.274260] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,commit=0
[ 1832.838922] EXT4-fs (dm-3): re-mounted. Opts: commit=0
[ 1833.563403] PM: Syncing filesystems ... done.
[ 1833.571094] PM: Preparing system for mem sleep
[ 1833.644494] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 1833.660156] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 1833.676160] PM: Entering mem sleep
[ 1833.676359] Suspending console(s) (use no_console_suspend to debug)
[ 1833.680983] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1833.702385] brcmsmac 0000:08:00.0: PCI INT A disabled
[ 1833.702432] HDA Intel 0000:00:14.2: PCI INT A disabled
[ 1833.702461] ACPI handle has no context!
[ 1833.702487] ehci_hcd 0000:00:13.2: PCI INT B disabled
[ 1833.702512] ohci_hcd 0000:00:13.1: PCI INT A disabled
[ 1833.702520] ohci_hcd 0000:00:13.0: PCI INT A disabled
[ 1833.702549] ohci_hcd 0000:00:12.1: PCI INT A disabled
[ 1833.702570] ohci_hcd 0000:00:12.0: PCI INT A disabled
[ 1833.707120] sd 0:0:0:0: [sda] Stopping disk
[ 1833.716176] ehci_hcd 0000:00:12.2: PCI INT B disabled
[ 1834.850434] [drm] Disabling audio support
[ 1834.866358] radeon 0000:01:00.0: PCI INT A disabled
[ 1834.880183] PM: suspend of devices complete after 1203.647 msecs
[ 1834.928203] PM: late suspend of devices complete after 48.014 msecs
[ 1834.928248] ACPI: Preparing to enter system sleep state S3
[ 1834.977254] PM: Saving platform NVS memory
[ 1834.987215] Disabling non-boot CPUs ...
[ 1834.988617] CPU 1 is now offline
[ 1834.989141] ACPI: Low-level resume complete
[ 1834.989141] PM: Restoring platform NVS memory
[ 1834.989141] PCI-DMA: Resuming GART IOMMU
[ 1834.989141] PCI-DMA: Restoring GART aperture settings
[ 1834.989141] Enabling non-boot CPUs ...
[ 1834.989141] Booting Node 0 Processor 1 APIC 0x1
[ 1834.989141] smpboot cpu 1: start_ip = 9a000
[ 1835.100161] Switch to broadcast mode on CPU1
[ 1835.104120] Switched to NOHz mode on CPU #1
[ 1835.112375] NMI watchdog enabled, takes one hw-pmu counter.
[ 1835.112573] CPU1 is up
[ 1835.113496] ACPI: Waking up from system sleep state S3
[ 1835.115640] pcieport 0000:00:02.0: restoring config space at offset 0x7 (was 0x20007171, writing 0x7171)
[ 1835.115646] pcieport 0000:00:02.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010)
[ 1835.115650] pcieport 0000:00:02.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 1835.115674] pcieport 0000:00:04.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010)
[ 1835.115678] pcieport 0000:00:04.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 1835.115699] pcieport 0000:00:05.0: restoring config space at offset 0x7 (was 0x1f1, writing 0x200001f1)
[ 1835.115703] pcieport 0000:00:05.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010)
[ 1835.115706] pcieport 0000:00:05.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 1835.115729] pcieport 0000:00:06.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010)
[ 1835.115732] pcieport 0000:00:06.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 1835.115803] ahci 0000:00:11.0: restoring config space at offset 0x1 (was 0x2300003, writing 0x2300407)
[ 1835.128103] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xf2308500-0xf23085ff] (PCI address [0xf2308500-0xf23085ff])
[ 1835.128134] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
[ 1835.144105] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xf2308400-0xf23084ff] (PCI address [0xf2308400-0xf23084ff])
[ 1835.144136] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
[ 1835.144296] radeon 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 1835.144301] radeon 0000:01:00.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100007)
[ 1835.144348] brcmsmac 0000:08:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006)
[ 1835.144487] PM: early resume of devices complete after 28.890 msecs
[ 1835.144660] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1835.144704] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1835.144727] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1835.144787] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1835.144812] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1835.144834] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1835.144857] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1835.144875] radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1835.144881] radeon 0000:01:00.0: setting latency timer to 64
[ 1835.144888] brcmsmac 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1835.144892] brcmsmac 0000:08:00.0: setting latency timer to 64
[ 1835.144931] sd 0:0:0:0: [sda] Starting disk
[ 1835.146807] [drm] Loading RV710 Microcode
[ 1835.436142] usb 2-2: reset high speed USB device number 2 using ehci_hcd
[ 1835.636129] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1835.659085] ata2.00: configured for UDMA/100
[ 1835.712641] usb 5-3: reset full speed USB device number 2 using ohci_hcd
[ 1835.884133] btusb 5-3:1.0: no reset_resume for driver btusb?
[ 1835.884136] btusb 5-3:1.1: no reset_resume for driver btusb?
[ 1837.652115] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1837.761502] ata1.00: configured for UDMA/100
[ 1895.904100] r600_cp: Failed to load firmware "radeon/RV710_pfp.bin"
[ 1895.904103] [drm:rv770_startup] *ERROR* Failed to load firmware!
[ 1895.904105] [drm:rv770_resume] *ERROR* r600 startup failed on resume
[ 1896.968218] PM: resume of devices complete after 61823.672 msecs
[ 1896.968709] PM: Finishing wakeup.
[ 1896.968711] Restarting tasks ... done.
[ 1896.974479] video LNXVIDEO:01: Restoring backlight state
[ 1897.980187] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1897.984348] atl1c 0000:09:00.0: irq 45 for MSI/MSI-X
[ 1898.045878] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1898.340061] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,commit=600
[ 1898.516438] EXT4-fs (dm-3): re-mounted. Opts: commit=600
[ 1900.292180] wlan0: authenticate with 00:11:22:33:44:55 (try 1)
[ 1900.294481] wlan0: authenticated
[ 1900.294548] wlan0: associate with 00:11:22:33:44:55 (try 1)
[ 1900.297607] wlan0: RX AssocResp from 00:11:22:33:44:55 (capab=0x431 status=0 aid=1)
[ 1900.297617] wlan0: associated
[ 1900.300145] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1910.704207] wlan0: no IPv6 routers present
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part
URL: <http://lists.freedesktop.org/archives/dri-devel/attachments/20110709/164312be/attachment-0001.pgp>
More information about the dri-devel
mailing list