[PATCH] drm/radeon/kms: add missing param for dce3.2 DP transmitter setup

[Alex Deucher]

This is used during phy init to set up the phy for DP.  This may
fix DP problems on DCE3.2 cards.

Signed-off-by: Alex Deucher <alexdeucher at gmail.com>
---
 drivers/gpu/drm/radeon/radeon_encoders.c |    5 +++--
 1 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index f55b64c..175a1e3 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -1090,9 +1090,10 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action, uint8_t
 			break;
 		}
 
-		if (is_dp)
+		if (is_dp) {
 			args.v2.acConfig.fCoherentMode = 1;
-		else if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) {
+			args.v2.acConfig.fDPConnector = 1;
+		} else if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) {
 			if (dig->coherent_mode)
 				args.v2.acConfig.fCoherentMode = 1;
 			if (radeon_encoder->pixel_clock > 165000)
-- 
1.7.1.1