[PATCH] fix backlight brightness on intel LVDS panel after reopening lid

[Indan Zupancic]

Hello,

On Fri, March 4, 2011 19:47, Linus Torvalds wrote:
> Alex, can you confirm that the revert of 951f3512dba5 plus the
> one-liner patch from Takashi that Indan quoted also works for you?
>
>               Linus
>
> On Thu, Mar 3, 2011 at 10:53 PM, Indan Zupancic <indan at nul.nu> wrote:
>>
>> So please revert my patch and apply Takashi Iwai's, which fixes the
>> most immediate bug without changing anything else. This should go
>> in stable too.
>

I found another backlight bug:

When suspending intel_panel_disable_backlight() is never called,
but intel_panel_enable_backlight() is called at resume. With the
effect that if the brightness was ever changed after screen
blanking, the wrong brightness gets restored.

This explains the weird behaviour I've seen. I didn't see it with
combination mode, because then the brightness is always the same
(zero or the maximum, the BIOS only uses LBPC on my system.) I'll
send a patch in a moment.

Alternative for reverting the combination mode removal (I can also
redo the patch against the revert and Takashi's patch, if that's
preferred):

--

drm/i915: Do handle backlight combination mode specially

Add back the combination mode check, but with slightly cleaner code
and the weirdness removed: No val >>= 1, but also no val &= ~1. The
old code probably confused bit 0 with BLM_LEGACY_MODE, which is bit 16.
The other change is clearer calculations: Just check for zero level
explicitly instead of avoiding the divide-by-zero.

Signed-off-by: Indan Zupancic <indan at nul.nu>

---

diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index d860abe..b05631a 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -30,6 +30,10 @@

 #include "intel_drv.h"

+#define PCI_LBPC 0xf4 /* legacy/combination backlight modes */
+#define BLM_COMBINATION_MODE (1 << 30)
+#define BLM_LEGACY_MODE (1 << 16)
+
 void
 intel_fixed_panel_mode(struct drm_display_mode *fixed_mode,
 		       struct drm_display_mode *adjusted_mode)
@@ -110,6 +114,22 @@ done:
 	dev_priv->pch_pf_size = (width << 16) | height;
 }

+/*
+ * What about gen 3? If there are no gen 3 systems with ASLE,
+ * then it doesn't matter, as we don't need to change the
+ * brightness. But then the gen 2 check can be removed too.
+ */
+static int is_backlight_combination_mode(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (INTEL_INFO(dev)->gen >= 4)
+		return I915_READ(BLC_PWM_CTL2) & BLM_COMBINATION_MODE;
+	if (IS_GEN2(dev))
+		return I915_READ(BLC_PWM_CTL) & BLM_LEGACY_MODE;
+	return 0;
+}
+
 static u32 i915_read_blc_pwm_ctl(struct drm_i915_private *dev_priv)
 {
 	u32 val;
@@ -163,9 +183,12 @@ u32 intel_panel_get_max_backlight(struct drm_device *dev)
 			max >>= 17;
 		} else {
 			max >>= 16;
+			/* Ignore BLM_LEGACY_MODE bit */
 			if (INTEL_INFO(dev)->gen < 4)
 				max &= ~1;
 		}
+		if (is_backlight_combination_mode(dev))
+			max *= 0xff;
 	}

 	DRM_DEBUG_DRIVER("max backlight PWM = %d\n", max);
@@ -183,6 +206,12 @@ u32 intel_panel_get_backlight(struct drm_device *dev)
 		val = I915_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
 		if (IS_PINEVIEW(dev))
 			val >>= 1;
+		if (is_backlight_combination_mode(dev)){
+			u8 lbpc;
+
+			pci_read_config_byte(dev->pdev, PCI_LBPC, &lbpc);
+			val *= lbpc;
+		}
 	}

 	DRM_DEBUG_DRIVER("get backlight PWM = %d\n", val);
@@ -205,6 +234,15 @@ void intel_panel_set_backlight(struct drm_device *dev, u32 level)

 	if (HAS_PCH_SPLIT(dev))
 		return intel_pch_panel_set_backlight(dev, level);
+
+	if (level && is_backlight_combination_mode(dev)){
+		u32 max = intel_panel_get_max_backlight(dev);
+		u8 lpbc;
+
+		lpbc = level * 0xff / max;
+		level /= lpbc;
+		pci_write_config_byte(dev->pdev, PCI_LBPC, lpbc);
+	}
 	tmp = I915_READ(BLC_PWM_CTL);
 	if (IS_PINEVIEW(dev)) {
 		tmp &= ~(BACKLIGHT_DUTY_CYCLE_MASK - 1);