[PATCH] ACPI/Intel: Rework Opregion support
Indan Zupancic
indan at nul.nu
Mon Mar 14 18:18:02 PDT 2011
Hello,
Some nitpicks below.
On Mon, March 14, 2011 18:59, Chris Wilson wrote:
> From: Matthew Garrett <mjg at redhat.com>
>
> The Integrated Graphics Device opregion specification defines a mechanism
> for the OS and system firmware to collaborate on various graphics-related
> functionality. This is currently implemented in the i915 driver but isn't
> strictly limited to these devices. Move it to a more generic location and
> remove the i915 dependency, while simultaneously reworking i915 to make
> use of the new driver.
>
> Signed-off-by: Matthew Garrett <mjg at redhat.com>
> Acked-by: Acked-by: Jesse Barnes <jbarnes at virtuousgeek.org>
> Cc: Alan Cox <alan at linux.intel.com>
> Cc: Keith Packard <keithp at keithp.com>
> Cc: Len Brown <lenb at kernel.org>
> [ickle: rebase onto drm-core-next]
> Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
> ---
>
> Note: neither the opregion_dev interface or the alse_set_* properly report
> failures. As such we have a slight change in behaviour on Ironlake+
> platforms and an uncorrected bug for earlier chipsets.
> -Chris
What uncorrected bug?
And are there earlier chipsets with ASLE support at all, besides gen 4?
If there are no gen 2 or gen 3 chipsets with ASLE then the backlight
code can be simplified further.
>
> ---
> drivers/acpi/Kconfig | 8 +
> drivers/acpi/Makefile | 1 +
> drivers/acpi/acpi_igd_opregion.c | 411 ++++++++++++++++++++++++++
> drivers/gpu/drm/Kconfig | 1 +
> drivers/gpu/drm/i915/Makefile | 1 -
> drivers/gpu/drm/i915/i915_debugfs.c | 2 +-
> drivers/gpu/drm/i915/i915_dma.c | 13 +-
> drivers/gpu/drm/i915/i915_drv.c | 6 +-
> drivers/gpu/drm/i915/i915_drv.h | 34 +--
> drivers/gpu/drm/i915/i915_irq.c | 7 +-
> drivers/gpu/drm/i915/intel_bios.c | 8 +-
> drivers/gpu/drm/i915/intel_lvds.c | 2 +-
> drivers/gpu/drm/i915/intel_opregion.c | 516 ---------------------------------
> drivers/gpu/drm/i915/intel_panel.c | 4 +-
> include/acpi/acpi_igd_opregion.h | 105 +++++++
> 15 files changed, 552 insertions(+), 567 deletions(-)
> create mode 100644 drivers/acpi/acpi_igd_opregion.c
> delete mode 100644 drivers/gpu/drm/i915/intel_opregion.c
> create mode 100644 include/acpi/acpi_igd_opregion.h
>
> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
> index 2aa042a..7ace174 100644
> --- a/drivers/acpi/Kconfig
> +++ b/drivers/acpi/Kconfig
> @@ -383,4 +383,12 @@ config ACPI_HED
>
> source "drivers/acpi/apei/Kconfig"
>
> +config ACPI_IGD_OPREGION
> + tristate "ACPI Integrated Graphics Device OpRegion support"
> + help
> + This driver adds support for the Intel ACPI Integrated Graphics
> + Device OpRegion specification, allowing communication between
> + the firmware and graphics driver on mobile systems with Intel
> + graphics
> +
Isn't this option always selected automatically when needed?
That is, it shouldn't show up as an option at all, so people
can't accidentally select it when they don't need it? Though
that doesn't quite work with modules I suppose, never mind.
> endif # ACPI
> diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
> index d113fa5..dcade4b 100644
> --- a/drivers/acpi/Makefile
> +++ b/drivers/acpi/Makefile
> @@ -62,6 +62,7 @@ obj-$(CONFIG_ACPI_SBS) += sbs.o
> obj-$(CONFIG_ACPI_POWER_METER) += power_meter.o
> obj-$(CONFIG_ACPI_HED) += hed.o
> obj-$(CONFIG_ACPI_EC_DEBUGFS) += ec_sys.o
> +obj-$(CONFIG_ACPI_IGD_OPREGION) += acpi_igd_opregion.o
>
> # processor has its own "processor." module_param namespace
> processor-y := processor_driver.o processor_throttling.o
> diff --git a/drivers/acpi/acpi_igd_opregion.c b/drivers/acpi/acpi_igd_opregion.c
> new file mode 100644
> index 0000000..0015ca8
> --- /dev/null
> +++ b/drivers/acpi/acpi_igd_opregion.c
> @@ -0,0 +1,411 @@
> +/*
> + * Copyright 2008 Intel Corporation <hong.liu at intel.com>
> + * Copyright 2008 Red Hat <mjg at redhat.com>
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining
> + * a copy of this software and associated documentation files (the
> + * "Software"), to deal in the Software without restriction, including
> + * without limitation the rights to use, copy, modify, merge, publish,
> + * distribute, sub license, and/or sell copies of the Software, and to
> + * permit persons to whom the Software is furnished to do so, subject to
> + * the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the
> + * next paragraph) shall be included in all copies or substantial
> + * portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
> + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NON-INFRINGEMENT. IN NO EVENT SHALL INTEL AND/OR ITS SUPPLIERS BE
> + * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
> + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
> + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
> + * SOFTWARE.
> + *
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/acpi_io.h>
> +#include <acpi/video.h>
> +#include <acpi/acpi_igd_opregion.h>
> +#include <drm/drmP.h>
> +
> +#define PCI_ASLE 0xe4
> +#define PCI_ASLS 0xfc
> +
> +#define OPREGION_HEADER_OFFSET 0
> +#define OPREGION_ACPI_OFFSET 0x100
> +#define ACPI_CLID 0x01ac /* current lid state indicator */
> +#define ACPI_CDCK 0x01b0 /* current docking state indicator */
> +#define OPREGION_SWSCI_OFFSET 0x200
> +#define OPREGION_ASLE_OFFSET 0x300
> +#define OPREGION_VBT_OFFSET 0x400
> +
> +#define OPREGION_SIGNATURE "IntelGraphicsMem"
> +#define MBOX_ACPI (1<<0)
> +#define MBOX_SWSCI (1<<1)
> +#define MBOX_ASLE (1<<2)
> +
> +/* ASLE irq request bits */
> +#define ASLE_SET_ALS_ILLUM (1 << 0)
> +#define ASLE_SET_BACKLIGHT (1 << 1)
> +#define ASLE_SET_PFIT (1 << 2)
> +#define ASLE_SET_PWM_FREQ (1 << 3)
> +#define ASLE_REQ_MSK 0xf
> +
> +/* response bits of ASLE irq request */
> +#define ASLE_ALS_ILLUM_FAILED (1<<10)
> +#define ASLE_BACKLIGHT_FAILED (1<<12)
> +#define ASLE_PFIT_FAILED (1<<14)
> +#define ASLE_PWM_FREQ_FAILED (1<<16)
> +
> +/* ASLE backlight brightness to set */
> +#define ASLE_BCLP_VALID (1<<31)
> +#define ASLE_BCLP_MSK (~(1<<31))
> +
> +/* ASLE panel fitting request */
> +#define ASLE_PFIT_VALID (1<<31)
> +#define ASLE_PFIT_CENTER (1<<0)
> +#define ASLE_PFIT_STRETCH_TEXT (1<<1)
> +#define ASLE_PFIT_STRETCH_GFX (1<<2)
> +
> +/* PWM frequency and minimum brightness */
> +#define ASLE_PFMB_BRIGHTNESS_MASK (0xff)
> +#define ASLE_PFMB_BRIGHTNESS_VALID (1<<8)
> +#define ASLE_PFMB_PWM_MASK (0x7ffffe00)
> +#define ASLE_PFMB_PWM_VALID (1<<31)
> +
> +#define ASLE_CBLV_VALID (1<<31)
> +
> +#define ACPI_OTHER_OUTPUT (0<<8)
> +#define ACPI_VGA_OUTPUT (1<<8)
> +#define ACPI_TV_OUTPUT (2<<8)
> +#define ACPI_DIGITAL_OUTPUT (3<<8)
> +#define ACPI_LVDS_OUTPUT (4<<8)
> +
> +#ifdef CONFIG_ACPI
> +static u32 asle_set_backlight(struct opregion_dev *dev, u32 bclp)
> +{
> + struct opregion_asle *asle = dev->opregion.asle;
> + u32 max = dev->max_backlight;
> +
> + if (!(bclp & ASLE_BCLP_VALID))
> + return ASLE_BACKLIGHT_FAILED;
> +
> + bclp &= ASLE_BCLP_MSK;
> + if (bclp > 255)
> + return ASLE_BACKLIGHT_FAILED;
> +
> + if (dev->set_backlight)
> + dev->set_backlight(dev->drm_dev, bclp * max / 255);
I would hide the max backlight from the opregion code and move this
calculation into set_brightness. Then change the interface to one
based on a scale from 0-255 or 0-100, which fits better with what
opregion actually does. On the other hand, it's the same code in
a different place, so it doesn't make much difference.
> +
> + asle->cblv = (bclp*0x64)/0xff | ASLE_CBLV_VALID;
> +
> + return 0;
> +}
> +
> +static u32 asle_set_als_illum(struct opregion_dev *dev, u32 alsi)
> +{
> + if (dev->set_als_illum)
> + dev->set_als_illum(dev->drm_dev, alsi);
> + return 0;
> +}
> +
> +static u32 asle_set_pwm_freq(struct opregion_dev *dev, u32 pfmb)
> +{
> + if (pfmb & ASLE_PFMB_PWM_VALID) {
> + if (dev->set_pwm_freq)
> + dev->set_pwm_freq(dev->drm_dev, pfmb);
> + }
> + return 0;
> +}
> +
> +static u32 asle_set_pfit(struct opregion_dev *dev, u32 pfit)
> +{
> + if (!(pfit & ASLE_PFIT_VALID))
> + return ASLE_PFIT_FAILED;
> +
> + if (dev->set_pfit)
> + dev->set_pfit(dev->drm_dev, pfit);
> +
> + return 0;
> +}
> +
> +void igd_opregion_intr(struct opregion_dev *dev)
> +{
> + struct opregion_asle *asle = dev->opregion.asle;
> + u32 asle_stat = 0;
> + u32 asle_req;
> +
> + if (!asle)
> + return;
> +
> + asle_req = asle->aslc & ASLE_REQ_MSK;
> +
> + if (!asle_req) {
> + DRM_DEBUG_DRIVER("non asle set request??\n");
> + return;
> + }
> +
> + if (asle_req & ASLE_SET_ALS_ILLUM)
> + asle_stat |= asle_set_als_illum(dev, asle->alsi);
> +
> + if (asle_req & ASLE_SET_BACKLIGHT)
> + asle_stat |= asle_set_backlight(dev, asle->bclp);
> +
> + if (asle_req & ASLE_SET_PFIT)
> + asle_stat |= asle_set_pfit(dev, asle->pfit);
> +
> + if (asle_req & ASLE_SET_PWM_FREQ)
> + asle_stat |= asle_set_pwm_freq(dev, asle->pfmb);
> +
> + asle->aslc = asle_stat;
> +}
> +EXPORT_SYMBOL(igd_opregion_intr);
> +
> +#define ASLE_ALS_EN (1<<0)
> +#define ASLE_BLC_EN (1<<1)
> +#define ASLE_PFIT_EN (1<<2)
> +#define ASLE_PFMB_EN (1<<3)
> +
> +void igd_opregion_enable_asle(struct opregion_dev *dev)
> +{
> + struct opregion_asle *asle = dev->opregion.asle;
> +
> + if (asle && dev->enable_asle) {
> + dev->enable_asle(dev->drm_dev);
> +
> + asle->tche = ASLE_ALS_EN | ASLE_BLC_EN | ASLE_PFIT_EN |
> + ASLE_PFMB_EN;
Shouldn't which flags are set depend on which callback functions are set?
Then you can remove all the function != NULL tests too. e.g:
if (dev->set_als_illum)
asle->tche |= ASLE_ALS_EN;
And at the end check if any flags were set:
if (asle->tche)
asle_>ardy = 1;
> + asle->ardy = 1;
> + }
> +}
> +EXPORT_SYMBOL(igd_opregion_enable_asle);
> +
> +#define ACPI_EV_DISPLAY_SWITCH (1<<0)
> +#define ACPI_EV_LID (1<<1)
> +#define ACPI_EV_DOCK (1<<2)
> +
> +static struct igd_opregion *system_opregion;
> +
> +static int igd_opregion_video_event(struct notifier_block *nb,
> + unsigned long val, void *data)
> +{
> + /* The only video events relevant to opregion are 0x80. These indicate
> + either a docking event, lid switch or display switch request. In
> + Linux, these are handled by the dock, button and video drivers.
> + We might want to fix the video driver to be opregion-aware in
> + future, but right now we just indicate to the firmware that the
> + request has been handled */
> +
> + struct opregion_acpi *acpi;
> +
> + if (!system_opregion)
> + return NOTIFY_DONE;
> +
> + acpi = system_opregion->acpi;
> + acpi->csts = 0;
> +
> + return NOTIFY_OK;
> +}
> +
> +static struct notifier_block igd_opregion_notifier = {
> + .notifier_call = igd_opregion_video_event,
> +};
> +
> +/*
> + * Initialise the DIDL field in opregion. This passes a list of devices to
> + * the firmware. Values are defined by section B.4.2 of the ACPI specification
> + * (version 3)
> + */
> +
> +static void igd_didl_outputs(struct opregion_dev *dev)
> +{
> + struct igd_opregion *opregion = &dev->opregion;
> + struct drm_connector *connector;
> + acpi_handle handle;
> + struct acpi_device *acpi_dev, *acpi_cdev, *acpi_video_bus = NULL;
> + unsigned long long device_id;
> + acpi_status status;
> + int i = 0;
> +
> + handle = DEVICE_ACPI_HANDLE(&dev->drm_dev->pdev->dev);
> + if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &acpi_dev)))
> + return;
> +
> + if (acpi_is_video_device(acpi_dev))
> + acpi_video_bus = acpi_dev;
> + else {
> + list_for_each_entry(acpi_cdev, &acpi_dev->children, node) {
> + if (acpi_is_video_device(acpi_cdev)) {
> + acpi_video_bus = acpi_cdev;
> + break;
> + }
> + }
> + }
> +
> + if (!acpi_video_bus) {
> + printk(KERN_WARNING "No ACPI video bus found\n");
> + return;
> + }
> +
> + list_for_each_entry(acpi_cdev, &acpi_video_bus->children, node) {
> + if (i >= 8) {
> + dev_printk(KERN_ERR, &dev->drm_dev->pdev->dev,
> + "More than 8 outputs detected\n");
> + return;
> + }
> + status =
> + acpi_evaluate_integer(acpi_cdev->handle, "_ADR",
> + NULL, &device_id);
> + if (ACPI_SUCCESS(status)) {
> + if (!device_id)
> + goto blind_set;
> + opregion->acpi->didl[i] = (u32)(device_id & 0x0f0f);
> + i++;
> + }
> + }
> +
> +end:
> + /* If fewer than 8 outputs, the list must be null terminated */
> + if (i < 8)
> + opregion->acpi->didl[i] = 0;
> + return;
> +
> +blind_set:
> + i = 0;
> + list_for_each_entry(connector, &dev->drm_dev->mode_config.connector_list, head) {
> + int output_type = ACPI_OTHER_OUTPUT;
> + if (i >= 8) {
> + dev_printk(KERN_ERR, &dev->drm_dev->pdev->dev,
> + "More than 8 outputs detected\n");
> + return;
> + }
> + switch (connector->connector_type) {
> + case DRM_MODE_CONNECTOR_VGA:
> + case DRM_MODE_CONNECTOR_DVIA:
> + output_type = ACPI_VGA_OUTPUT;
> + break;
> + case DRM_MODE_CONNECTOR_Composite:
> + case DRM_MODE_CONNECTOR_SVIDEO:
> + case DRM_MODE_CONNECTOR_Component:
> + case DRM_MODE_CONNECTOR_9PinDIN:
> + output_type = ACPI_TV_OUTPUT;
> + break;
> + case DRM_MODE_CONNECTOR_DVII:
> + case DRM_MODE_CONNECTOR_DVID:
> + case DRM_MODE_CONNECTOR_DisplayPort:
> + case DRM_MODE_CONNECTOR_HDMIA:
> + case DRM_MODE_CONNECTOR_HDMIB:
> + output_type = ACPI_DIGITAL_OUTPUT;
> + break;
> + case DRM_MODE_CONNECTOR_LVDS:
> + output_type = ACPI_LVDS_OUTPUT;
> + break;
> + }
> + opregion->acpi->didl[i] |= (1<<31) | output_type | i;
> + i++;
> + }
> + goto end;
> +}
> +
> +void igd_opregion_init(struct opregion_dev *dev)
> +{
> + struct igd_opregion *opregion = &dev->opregion;
> +
> + if (!opregion->header)
> + return;
> +
> + if (opregion->acpi) {
> + if (drm_core_check_feature(dev->drm_dev, DRIVER_MODESET))
> + igd_didl_outputs(dev);
> +
> + /* Notify BIOS we are ready to handle ACPI video ext notifs.
> + * Right now, all the events are handled by the ACPI video module.
> + * We don't actually need to do anything with them. */
> + opregion->acpi->csts = 0;
> + opregion->acpi->drdy = 1;
> +
> + system_opregion = opregion;
> + register_acpi_notifier(&igd_opregion_notifier);
> + }
> +
> + if (opregion->asle)
> + dev->enable_asle(dev->drm_dev);
> +}
> +EXPORT_SYMBOL(igd_opregion_init);
> +
> +void igd_opregion_fini(struct opregion_dev *dev)
> +{
> + struct igd_opregion *opregion = &dev->opregion;
> +
> + if (!opregion->header)
> + return;
> +
> + if (opregion->acpi) {
> + opregion->acpi->drdy = 0;
> +
> + system_opregion = NULL;
> + unregister_acpi_notifier(&igd_opregion_notifier);
> + }
> +
> + /* just clear all opregion memory pointers now */
> + iounmap(opregion->header);
> + opregion->header = NULL;
> + opregion->acpi = NULL;
> + opregion->swsci = NULL;
> + opregion->asle = NULL;
> + opregion->vbt = NULL;
> +}
> +EXPORT_SYMBOL(igd_opregion_fini);
> +#endif
> +
> +int igd_opregion_setup(struct opregion_dev *dev)
> +{
> + struct igd_opregion *opregion = &dev->opregion;
> + void *base;
> + u32 asls, mboxes;
> + int err = 0;
> +
> + pci_read_config_dword(dev->drm_dev->pdev, PCI_ASLS, &asls);
> + DRM_DEBUG_DRIVER("graphic opregion physical addr: 0x%x\n", asls);
> + if (asls == 0) {
> + DRM_DEBUG_DRIVER("ACPI OpRegion not supported!\n");
> + return -ENOTSUPP;
> + }
> +
> + base = acpi_os_ioremap(asls, OPREGION_SIZE);
> + if (!base)
> + return -ENOMEM;
> +
> + if (memcmp(base, OPREGION_SIGNATURE, 16)) {
> + DRM_DEBUG_DRIVER("opregion signature mismatch\n");
> + err = -EINVAL;
> + goto err_out;
> + }
> + opregion->header = base;
> + opregion->vbt = base + OPREGION_VBT_OFFSET;
> +
> + mboxes = opregion->header->mboxes;
> + if (mboxes & MBOX_ACPI) {
> + DRM_DEBUG_DRIVER("Public ACPI methods supported\n");
> + opregion->acpi = base + OPREGION_ACPI_OFFSET;
> + }
> +
> + if (mboxes & MBOX_SWSCI) {
> + DRM_DEBUG_DRIVER("SWSCI supported\n");
> + opregion->swsci = base + OPREGION_SWSCI_OFFSET;
> + }
> + if (mboxes & MBOX_ASLE) {
> + DRM_DEBUG_DRIVER("ASLE supported\n");
> + opregion->asle = base + OPREGION_ASLE_OFFSET;
> + }
> +
> + return 0;
> +
> +err_out:
> + iounmap(base);
> + return err;
> +}
> +EXPORT_SYMBOL(igd_opregion_setup);
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index a6feb78c..501f4dc 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -99,6 +99,7 @@ config DRM_I915
> select INPUT if ACPI
> select ACPI_VIDEO if ACPI
> select ACPI_BUTTON if ACPI
> + select ACPI_IGD_OPREGION if ACPI
> help
> Choose this option if you have a system that has "Intel Graphics
> Media Accelerator" or "HD Graphics" integrated graphics,
> diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
> index 0ae6a7c..776c362 100644
> --- a/drivers/gpu/drm/i915/Makefile
> +++ b/drivers/gpu/drm/i915/Makefile
> @@ -28,7 +28,6 @@ i915-y := i915_drv.o i915_dma.o i915_irq.o i915_mem.o \
> intel_dvo.o \
> intel_ringbuffer.o \
> intel_overlay.o \
> - intel_opregion.o \
> dvo_ch7xxx.o \
> dvo_ch7017.o \
> dvo_ivch.o \
> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> index 09e0327..e67ff81 100644
> --- a/drivers/gpu/drm/i915/i915_debugfs.c
> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> @@ -1129,7 +1129,7 @@ static int i915_opregion(struct seq_file *m, void *unused)
> struct drm_info_node *node = (struct drm_info_node *) m->private;
> struct drm_device *dev = node->minor->dev;
> drm_i915_private_t *dev_priv = dev->dev_private;
> - struct intel_opregion *opregion = &dev_priv->opregion;
> + struct igd_opregion *opregion = &dev_priv->opregion_dev.opregion;
> int ret;
>
> ret = mutex_lock_interruptible(&dev->struct_mutex);
> diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
> index 7273037..ff057a8 100644
> --- a/drivers/gpu/drm/i915/i915_dma.c
> +++ b/drivers/gpu/drm/i915/i915_dma.c
> @@ -1990,7 +1990,14 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
> /* Try to make sure MCHBAR is enabled before poking at it */
> intel_setup_mchbar(dev);
> intel_setup_gmbus(dev);
> - intel_opregion_setup(dev);
> +
> + if (IS_MOBILE(dev)) {
> + dev_priv->opregion_dev.max_backlight = intel_panel_get_max_backlight(dev);
> + dev_priv->opregion_dev.set_backlight = intel_panel_set_backlight;
> + }
> + dev_priv->opregion_dev.enable_asle = intel_enable_asle;
> + dev_priv->opregion_dev.drm_dev = dev;
So we have a drm_device->drm_i915_private->opregion_dev.drm_device loop,
which is a bit messy, but consistent with other existing code.
> + igd_opregion_setup(&dev_priv->opregion_dev);
>
> /* Make sure the bios did its job and set up vital registers */
> intel_setup_bios(dev);
> @@ -2049,7 +2056,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
> }
>
> /* Must be done after probing outputs */
> - intel_opregion_init(dev);
> + igd_opregion_init(&dev_priv->opregion_dev);
> acpi_video_register();
>
> setup_timer(&dev_priv->hangcheck_timer, i915_hangcheck_elapsed,
> @@ -2138,7 +2145,7 @@ int i915_driver_unload(struct drm_device *dev)
> if (dev->pdev->msi_enabled)
> pci_disable_msi(dev->pdev);
>
> - intel_opregion_fini(dev);
> + igd_opregion_fini(&dev_priv->opregion_dev);
>
> if (drm_core_check_feature(dev, DRIVER_MODESET)) {
> /* Flush any outstanding unpin_work. */
> diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
> index c34a8dd..cf66ca8 100644
> --- a/drivers/gpu/drm/i915/i915_drv.c
> +++ b/drivers/gpu/drm/i915/i915_drv.c
> @@ -316,7 +316,7 @@ static int i915_drm_freeze(struct drm_device *dev)
>
> i915_save_state(dev);
>
> - intel_opregion_fini(dev);
> + igd_opregion_fini(&dev_priv->opregion_dev);
>
> /* Modeset on resume, not lid events */
> dev_priv->modeset_on_lid = 0;
> @@ -366,7 +366,7 @@ static int i915_drm_thaw(struct drm_device *dev)
> }
>
> i915_restore_state(dev);
> - intel_opregion_setup(dev);
> + igd_opregion_setup(&dev_priv->opregion_dev);
>
> /* KMS EnterVT equivalent */
> if (drm_core_check_feature(dev, DRIVER_MODESET)) {
> @@ -386,7 +386,7 @@ static int i915_drm_thaw(struct drm_device *dev)
> ironlake_enable_rc6(dev);
> }
>
> - intel_opregion_init(dev);
> + igd_opregion_init(&dev_priv->opregion_dev);
>
> dev_priv->modeset_on_lid = 0;
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 4496505..4d2475b 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -36,6 +36,7 @@
> #include <linux/io-mapping.h>
> #include <linux/i2c.h>
> #include <drm/intel-gtt.h>
> +#include <acpi/acpi_igd_opregion.h>
>
> /* General customization:
> */
> @@ -102,21 +103,6 @@ struct mem_block {
> struct drm_file *file_priv; /* NULL: free, -1: heap, other: real files */
> };
>
> -struct opregion_header;
> -struct opregion_acpi;
> -struct opregion_swsci;
> -struct opregion_asle;
> -
> -struct intel_opregion {
> - struct opregion_header *header;
> - struct opregion_acpi *acpi;
> - struct opregion_swsci *swsci;
> - struct opregion_asle *asle;
> - void *vbt;
> - u32 __iomem *lid_state;
> -};
> -#define OPREGION_SIZE (8*1024)
> -
> struct intel_overlay;
> struct intel_overlay_error_state;
>
> @@ -322,7 +308,7 @@ typedef struct drm_i915_private {
> int cfb_plane;
> int cfb_y;
>
> - struct intel_opregion opregion;
> + struct opregion_dev opregion_dev;
>
> /* overlay */
> struct intel_overlay *overlay;
> @@ -1237,22 +1223,6 @@ extern inline bool intel_gmbus_is_forced_bit(struct i2c_adapter
> *adapter)
> }
> extern void intel_i2c_reset(struct drm_device *dev);
>
> -/* intel_opregion.c */
> -extern int intel_opregion_setup(struct drm_device *dev);
> -#ifdef CONFIG_ACPI
> -extern void intel_opregion_init(struct drm_device *dev);
> -extern void intel_opregion_fini(struct drm_device *dev);
> -extern void intel_opregion_asle_intr(struct drm_device *dev);
> -extern void intel_opregion_gse_intr(struct drm_device *dev);
> -extern void intel_opregion_enable_asle(struct drm_device *dev);
> -#else
> -static inline void intel_opregion_init(struct drm_device *dev) { return; }
> -static inline void intel_opregion_fini(struct drm_device *dev) { return; }
> -static inline void intel_opregion_asle_intr(struct drm_device *dev) { return; }
> -static inline void intel_opregion_gse_intr(struct drm_device *dev) { return; }
> -static inline void intel_opregion_enable_asle(struct drm_device *dev) { return; }
> -#endif
> -
> /* intel_acpi.c */
> #ifdef CONFIG_ACPI
> extern void intel_register_dsm_handler(void);
> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> index 188b497..8d9f406 100644
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -496,7 +496,7 @@ static irqreturn_t ironlake_irq_handler(struct drm_device *dev)
> notify_ring(dev, &dev_priv->ring[BCS]);
>
> if (de_iir & DE_GSE)
> - intel_opregion_gse_intr(dev);
> + igd_opregion_intr(&dev_priv->opregion_dev);
>
> if (de_iir & DE_PLANEA_FLIP_DONE) {
> intel_prepare_page_flip(dev, 0);
> @@ -1203,9 +1203,8 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
> blc_event = true;
> }
>
> -
> if (blc_event || (iir & I915_ASLE_INTERRUPT))
> - intel_opregion_asle_intr(dev);
> + igd_opregion_intr(&dev_priv->opregion_dev);
>
> /* With MSI, interrupts are only generated when iir
> * transitions from zero to nonzero. If another bit got
> @@ -1762,7 +1761,7 @@ int i915_driver_irq_postinstall(struct drm_device *dev)
> I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
> }
>
> - intel_opregion_enable_asle(dev);
> + igd_opregion_enable_asle(&dev_priv->opregion_dev);
>
> return 0;
> }
> diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
> index fb5b4d4..5123cf9 100644
> --- a/drivers/gpu/drm/i915/intel_bios.c
> +++ b/drivers/gpu/drm/i915/intel_bios.c
> @@ -611,15 +611,15 @@ intel_parse_bios(struct drm_device *dev)
>
> init_vbt_defaults(dev_priv);
>
> - /* XXX Should this validation be moved to intel_opregion.c? */
> - if (dev_priv->opregion.vbt) {
> - struct vbt_header *vbt = dev_priv->opregion.vbt;
> + /* XXX Should this validation be moved to acpi_igd_opregion.c? */
Should it? Seems like a good moment to do so.
> + if (dev_priv->opregion_dev.opregion.vbt) {
> + struct vbt_header *vbt = dev_priv->opregion_dev.opregion.vbt;
> if (memcmp(vbt->signature, "$VBT", 4) == 0) {
> DRM_DEBUG_DRIVER("Using VBT from OpRegion: %20s\n",
> vbt->signature);
> bdb = (struct bdb_header *)((char *)vbt + vbt->bdb_offset);
> } else
> - dev_priv->opregion.vbt = NULL;
> + dev_priv->opregion_dev.opregion.vbt = NULL;
> }
>
> if (bdb == NULL) {
> diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
> index 1a311ad..a499e867e 100644
> --- a/drivers/gpu/drm/i915/intel_lvds.c
> +++ b/drivers/gpu/drm/i915/intel_lvds.c
> @@ -828,7 +828,7 @@ static bool lvds_is_present_in_vbt(struct drm_device *dev,
> * additional data. Trust that if the VBT was written into
> * the OpRegion then they have validated the LVDS's existence.
> */
> - if (dev_priv->opregion.vbt)
> + if (dev_priv->opregion_dev.opregion.vbt)
> return true;
> }
>
> diff --git a/drivers/gpu/drm/i915/intel_opregion.c
> b/drivers/gpu/drm/i915/intel_opregion.c
> deleted file mode 100644
> index d2c7104..0000000
> --- a/drivers/gpu/drm/i915/intel_opregion.c
> +++ /dev/null
> @@ -1,516 +0,0 @@
> -/*
> - * Copyright 2008 Intel Corporation <hong.liu at intel.com>
> - * Copyright 2008 Red Hat <mjg at redhat.com>
> - *
> - * Permission is hereby granted, free of charge, to any person obtaining
> - * a copy of this software and associated documentation files (the
> - * "Software"), to deal in the Software without restriction, including
> - * without limitation the rights to use, copy, modify, merge, publish,
> - * distribute, sub license, and/or sell copies of the Software, and to
> - * permit persons to whom the Software is furnished to do so, subject to
> - * the following conditions:
> - *
> - * The above copyright notice and this permission notice (including the
> - * next paragraph) shall be included in all copies or substantial
> - * portions of the Software.
> - *
> - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
> - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> - * NON-INFRINGEMENT. IN NO EVENT SHALL INTEL AND/OR ITS SUPPLIERS BE
> - * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
> - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
> - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
> - * SOFTWARE.
> - *
> - */
> -
> -#include <linux/acpi.h>
> -#include <linux/acpi_io.h>
> -#include <acpi/video.h>
> -
> -#include "drmP.h"
> -#include "i915_drm.h"
> -#include "i915_drv.h"
> -#include "intel_drv.h"
> -
> -#define PCI_ASLE 0xe4
> -#define PCI_ASLS 0xfc
> -
> -#define OPREGION_HEADER_OFFSET 0
> -#define OPREGION_ACPI_OFFSET 0x100
> -#define ACPI_CLID 0x01ac /* current lid state indicator */
> -#define ACPI_CDCK 0x01b0 /* current docking state indicator */
> -#define OPREGION_SWSCI_OFFSET 0x200
> -#define OPREGION_ASLE_OFFSET 0x300
> -#define OPREGION_VBT_OFFSET 0x400
> -
> -#define OPREGION_SIGNATURE "IntelGraphicsMem"
> -#define MBOX_ACPI (1<<0)
> -#define MBOX_SWSCI (1<<1)
> -#define MBOX_ASLE (1<<2)
> -
> -struct opregion_header {
> - u8 signature[16];
> - u32 size;
> - u32 opregion_ver;
> - u8 bios_ver[32];
> - u8 vbios_ver[16];
> - u8 driver_ver[16];
> - u32 mboxes;
> - u8 reserved[164];
> -} __attribute__((packed));
> -
> -/* OpRegion mailbox #1: public ACPI methods */
> -struct opregion_acpi {
> - u32 drdy; /* driver readiness */
> - u32 csts; /* notification status */
> - u32 cevt; /* current event */
> - u8 rsvd1[20];
> - u32 didl[8]; /* supported display devices ID list */
> - u32 cpdl[8]; /* currently presented display list */
> - u32 cadl[8]; /* currently active display list */
> - u32 nadl[8]; /* next active devices list */
> - u32 aslp; /* ASL sleep time-out */
> - u32 tidx; /* toggle table index */
> - u32 chpd; /* current hotplug enable indicator */
> - u32 clid; /* current lid state*/
> - u32 cdck; /* current docking state */
> - u32 sxsw; /* Sx state resume */
> - u32 evts; /* ASL supported events */
> - u32 cnot; /* current OS notification */
> - u32 nrdy; /* driver status */
> - u8 rsvd2[60];
> -} __attribute__((packed));
> -
> -/* OpRegion mailbox #2: SWSCI */
> -struct opregion_swsci {
> - u32 scic; /* SWSCI command|status|data */
> - u32 parm; /* command parameters */
> - u32 dslp; /* driver sleep time-out */
> - u8 rsvd[244];
> -} __attribute__((packed));
> -
> -/* OpRegion mailbox #3: ASLE */
> -struct opregion_asle {
> - u32 ardy; /* driver readiness */
> - u32 aslc; /* ASLE interrupt command */
> - u32 tche; /* technology enabled indicator */
> - u32 alsi; /* current ALS illuminance reading */
> - u32 bclp; /* backlight brightness to set */
> - u32 pfit; /* panel fitting state */
> - u32 cblv; /* current brightness level */
> - u16 bclm[20]; /* backlight level duty cycle mapping table */
> - u32 cpfm; /* current panel fitting mode */
> - u32 epfm; /* enabled panel fitting modes */
> - u8 plut[74]; /* panel LUT and identifier */
> - u32 pfmb; /* PWM freq and min brightness */
> - u8 rsvd[102];
> -} __attribute__((packed));
> -
> -/* ASLE irq request bits */
> -#define ASLE_SET_ALS_ILLUM (1 << 0)
> -#define ASLE_SET_BACKLIGHT (1 << 1)
> -#define ASLE_SET_PFIT (1 << 2)
> -#define ASLE_SET_PWM_FREQ (1 << 3)
> -#define ASLE_REQ_MSK 0xf
> -
> -/* response bits of ASLE irq request */
> -#define ASLE_ALS_ILLUM_FAILED (1<<10)
> -#define ASLE_BACKLIGHT_FAILED (1<<12)
> -#define ASLE_PFIT_FAILED (1<<14)
> -#define ASLE_PWM_FREQ_FAILED (1<<16)
> -
> -/* ASLE backlight brightness to set */
> -#define ASLE_BCLP_VALID (1<<31)
> -#define ASLE_BCLP_MSK (~(1<<31))
> -
> -/* ASLE panel fitting request */
> -#define ASLE_PFIT_VALID (1<<31)
> -#define ASLE_PFIT_CENTER (1<<0)
> -#define ASLE_PFIT_STRETCH_TEXT (1<<1)
> -#define ASLE_PFIT_STRETCH_GFX (1<<2)
> -
> -/* PWM frequency and minimum brightness */
> -#define ASLE_PFMB_BRIGHTNESS_MASK (0xff)
> -#define ASLE_PFMB_BRIGHTNESS_VALID (1<<8)
> -#define ASLE_PFMB_PWM_MASK (0x7ffffe00)
> -#define ASLE_PFMB_PWM_VALID (1<<31)
> -
> -#define ASLE_CBLV_VALID (1<<31)
> -
> -#define ACPI_OTHER_OUTPUT (0<<8)
> -#define ACPI_VGA_OUTPUT (1<<8)
> -#define ACPI_TV_OUTPUT (2<<8)
> -#define ACPI_DIGITAL_OUTPUT (3<<8)
> -#define ACPI_LVDS_OUTPUT (4<<8)
> -
> -#ifdef CONFIG_ACPI
> -static u32 asle_set_backlight(struct drm_device *dev, u32 bclp)
> -{
> - struct drm_i915_private *dev_priv = dev->dev_private;
> - struct opregion_asle *asle = dev_priv->opregion.asle;
> - u32 max;
> -
> - if (!(bclp & ASLE_BCLP_VALID))
> - return ASLE_BACKLIGHT_FAILED;
> -
> - bclp &= ASLE_BCLP_MSK;
> - if (bclp > 255)
> - return ASLE_BACKLIGHT_FAILED;
> -
> - max = intel_panel_get_max_backlight(dev);
> - intel_panel_set_backlight(dev, bclp * max / 255);
> - asle->cblv = (bclp*0x64)/0xff | ASLE_CBLV_VALID;
> -
> - return 0;
> -}
> -
> -static u32 asle_set_als_illum(struct drm_device *dev, u32 alsi)
> -{
> - /* alsi is the current ALS reading in lux. 0 indicates below sensor
> - range, 0xffff indicates above sensor range. 1-0xfffe are valid */
> - return 0;
> -}
> -
> -static u32 asle_set_pwm_freq(struct drm_device *dev, u32 pfmb)
> -{
> - struct drm_i915_private *dev_priv = dev->dev_private;
> - if (pfmb & ASLE_PFMB_PWM_VALID) {
> - u32 blc_pwm_ctl = I915_READ(BLC_PWM_CTL);
> - u32 pwm = pfmb & ASLE_PFMB_PWM_MASK;
> - blc_pwm_ctl &= BACKLIGHT_DUTY_CYCLE_MASK;
> - pwm = pwm >> 9;
> - /* FIXME - what do we do with the PWM? */
> - }
> - return 0;
> -}
> -
> -static u32 asle_set_pfit(struct drm_device *dev, u32 pfit)
> -{
> - /* Panel fitting is currently controlled by the X code, so this is a
> - noop until modesetting support works fully */
> - if (!(pfit & ASLE_PFIT_VALID))
> - return ASLE_PFIT_FAILED;
> - return 0;
> -}
> -
> -void intel_opregion_asle_intr(struct drm_device *dev)
> -{
> - struct drm_i915_private *dev_priv = dev->dev_private;
> - struct opregion_asle *asle = dev_priv->opregion.asle;
> - u32 asle_stat = 0;
> - u32 asle_req;
> -
> - if (!asle)
> - return;
> -
> - asle_req = asle->aslc & ASLE_REQ_MSK;
> -
> - if (!asle_req) {
> - DRM_DEBUG_DRIVER("non asle set request??\n");
> - return;
> - }
> -
> - if (asle_req & ASLE_SET_ALS_ILLUM)
> - asle_stat |= asle_set_als_illum(dev, asle->alsi);
> -
> - if (asle_req & ASLE_SET_BACKLIGHT)
> - asle_stat |= asle_set_backlight(dev, asle->bclp);
> -
> - if (asle_req & ASLE_SET_PFIT)
> - asle_stat |= asle_set_pfit(dev, asle->pfit);
> -
> - if (asle_req & ASLE_SET_PWM_FREQ)
> - asle_stat |= asle_set_pwm_freq(dev, asle->pfmb);
> -
> - asle->aslc = asle_stat;
> -}
> -
> -/* Only present on Ironlake+ */
> -void intel_opregion_gse_intr(struct drm_device *dev)
> -{
> - struct drm_i915_private *dev_priv = dev->dev_private;
> - struct opregion_asle *asle = dev_priv->opregion.asle;
> - u32 asle_stat = 0;
> - u32 asle_req;
> -
> - if (!asle)
> - return;
> -
> - asle_req = asle->aslc & ASLE_REQ_MSK;
> -
> - if (!asle_req) {
> - DRM_DEBUG_DRIVER("non asle set request??\n");
> - return;
> - }
> -
> - if (asle_req & ASLE_SET_ALS_ILLUM) {
> - DRM_DEBUG_DRIVER("Illum is not supported\n");
> - asle_stat |= ASLE_ALS_ILLUM_FAILED;
> - }
> -
> - if (asle_req & ASLE_SET_BACKLIGHT)
> - asle_stat |= asle_set_backlight(dev, asle->bclp);
> -
> - if (asle_req & ASLE_SET_PFIT) {
> - DRM_DEBUG_DRIVER("Pfit is not supported\n");
> - asle_stat |= ASLE_PFIT_FAILED;
> - }
> -
> - if (asle_req & ASLE_SET_PWM_FREQ) {
> - DRM_DEBUG_DRIVER("PWM freq is not supported\n");
> - asle_stat |= ASLE_PWM_FREQ_FAILED;
> - }
> -
> - asle->aslc = asle_stat;
> -}
> -#define ASLE_ALS_EN (1<<0)
> -#define ASLE_BLC_EN (1<<1)
> -#define ASLE_PFIT_EN (1<<2)
> -#define ASLE_PFMB_EN (1<<3)
> -
> -void intel_opregion_enable_asle(struct drm_device *dev)
> -{
> - struct drm_i915_private *dev_priv = dev->dev_private;
> - struct opregion_asle *asle = dev_priv->opregion.asle;
> -
> - if (asle) {
> - if (IS_MOBILE(dev))
> - intel_enable_asle(dev);
> -
> - asle->tche = ASLE_ALS_EN | ASLE_BLC_EN | ASLE_PFIT_EN |
> - ASLE_PFMB_EN;
> - asle->ardy = 1;
> - }
> -}
> -
> -#define ACPI_EV_DISPLAY_SWITCH (1<<0)
> -#define ACPI_EV_LID (1<<1)
> -#define ACPI_EV_DOCK (1<<2)
> -
> -static struct intel_opregion *system_opregion;
> -
> -static int intel_opregion_video_event(struct notifier_block *nb,
> - unsigned long val, void *data)
> -{
> - /* The only video events relevant to opregion are 0x80. These indicate
> - either a docking event, lid switch or display switch request. In
> - Linux, these are handled by the dock, button and video drivers.
> - We might want to fix the video driver to be opregion-aware in
> - future, but right now we just indicate to the firmware that the
> - request has been handled */
> -
> - struct opregion_acpi *acpi;
> -
> - if (!system_opregion)
> - return NOTIFY_DONE;
> -
> - acpi = system_opregion->acpi;
> - acpi->csts = 0;
> -
> - return NOTIFY_OK;
> -}
> -
> -static struct notifier_block intel_opregion_notifier = {
> - .notifier_call = intel_opregion_video_event,
> -};
> -
> -/*
> - * Initialise the DIDL field in opregion. This passes a list of devices to
> - * the firmware. Values are defined by section B.4.2 of the ACPI specification
> - * (version 3)
> - */
> -
> -static void intel_didl_outputs(struct drm_device *dev)
> -{
> - struct drm_i915_private *dev_priv = dev->dev_private;
> - struct intel_opregion *opregion = &dev_priv->opregion;
> - struct drm_connector *connector;
> - acpi_handle handle;
> - struct acpi_device *acpi_dev, *acpi_cdev, *acpi_video_bus = NULL;
> - unsigned long long device_id;
> - acpi_status status;
> - int i = 0;
> -
> - handle = DEVICE_ACPI_HANDLE(&dev->pdev->dev);
> - if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &acpi_dev)))
> - return;
> -
> - if (acpi_is_video_device(acpi_dev))
> - acpi_video_bus = acpi_dev;
> - else {
> - list_for_each_entry(acpi_cdev, &acpi_dev->children, node) {
> - if (acpi_is_video_device(acpi_cdev)) {
> - acpi_video_bus = acpi_cdev;
> - break;
> - }
> - }
> - }
> -
> - if (!acpi_video_bus) {
> - printk(KERN_WARNING "No ACPI video bus found\n");
> - return;
> - }
> -
> - list_for_each_entry(acpi_cdev, &acpi_video_bus->children, node) {
> - if (i >= 8) {
> - dev_printk (KERN_ERR, &dev->pdev->dev,
> - "More than 8 outputs detected\n");
> - return;
> - }
> - status =
> - acpi_evaluate_integer(acpi_cdev->handle, "_ADR",
> - NULL, &device_id);
> - if (ACPI_SUCCESS(status)) {
> - if (!device_id)
> - goto blind_set;
> - opregion->acpi->didl[i] = (u32)(device_id & 0x0f0f);
> - i++;
> - }
> - }
> -
> -end:
> - /* If fewer than 8 outputs, the list must be null terminated */
> - if (i < 8)
> - opregion->acpi->didl[i] = 0;
> - return;
> -
> -blind_set:
> - i = 0;
> - list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
> - int output_type = ACPI_OTHER_OUTPUT;
> - if (i >= 8) {
> - dev_printk (KERN_ERR, &dev->pdev->dev,
> - "More than 8 outputs detected\n");
> - return;
> - }
> - switch (connector->connector_type) {
> - case DRM_MODE_CONNECTOR_VGA:
> - case DRM_MODE_CONNECTOR_DVIA:
> - output_type = ACPI_VGA_OUTPUT;
> - break;
> - case DRM_MODE_CONNECTOR_Composite:
> - case DRM_MODE_CONNECTOR_SVIDEO:
> - case DRM_MODE_CONNECTOR_Component:
> - case DRM_MODE_CONNECTOR_9PinDIN:
> - output_type = ACPI_TV_OUTPUT;
> - break;
> - case DRM_MODE_CONNECTOR_DVII:
> - case DRM_MODE_CONNECTOR_DVID:
> - case DRM_MODE_CONNECTOR_DisplayPort:
> - case DRM_MODE_CONNECTOR_HDMIA:
> - case DRM_MODE_CONNECTOR_HDMIB:
> - output_type = ACPI_DIGITAL_OUTPUT;
> - break;
> - case DRM_MODE_CONNECTOR_LVDS:
> - output_type = ACPI_LVDS_OUTPUT;
> - break;
> - }
> - opregion->acpi->didl[i] |= (1<<31) | output_type | i;
> - i++;
> - }
> - goto end;
> -}
> -
> -void intel_opregion_init(struct drm_device *dev)
> -{
> - struct drm_i915_private *dev_priv = dev->dev_private;
> - struct intel_opregion *opregion = &dev_priv->opregion;
> -
> - if (!opregion->header)
> - return;
> -
> - if (opregion->acpi) {
> - if (drm_core_check_feature(dev, DRIVER_MODESET))
> - intel_didl_outputs(dev);
> -
> - /* Notify BIOS we are ready to handle ACPI video ext notifs.
> - * Right now, all the events are handled by the ACPI video module.
> - * We don't actually need to do anything with them. */
> - opregion->acpi->csts = 0;
> - opregion->acpi->drdy = 1;
> -
> - system_opregion = opregion;
> - register_acpi_notifier(&intel_opregion_notifier);
> - }
> -
> - if (opregion->asle)
> - intel_opregion_enable_asle(dev);
> -}
> -
> -void intel_opregion_fini(struct drm_device *dev)
> -{
> - struct drm_i915_private *dev_priv = dev->dev_private;
> - struct intel_opregion *opregion = &dev_priv->opregion;
> -
> - if (!opregion->header)
> - return;
> -
> - if (opregion->acpi) {
> - opregion->acpi->drdy = 0;
> -
> - system_opregion = NULL;
> - unregister_acpi_notifier(&intel_opregion_notifier);
> - }
> -
> - /* just clear all opregion memory pointers now */
> - iounmap(opregion->header);
> - opregion->header = NULL;
> - opregion->acpi = NULL;
> - opregion->swsci = NULL;
> - opregion->asle = NULL;
> - opregion->vbt = NULL;
> -}
> -#endif
> -
> -int intel_opregion_setup(struct drm_device *dev)
> -{
> - struct drm_i915_private *dev_priv = dev->dev_private;
> - struct intel_opregion *opregion = &dev_priv->opregion;
> - void *base;
> - u32 asls, mboxes;
> - int err = 0;
> -
> - pci_read_config_dword(dev->pdev, PCI_ASLS, &asls);
> - DRM_DEBUG_DRIVER("graphic opregion physical addr: 0x%x\n", asls);
> - if (asls == 0) {
> - DRM_DEBUG_DRIVER("ACPI OpRegion not supported!\n");
> - return -ENOTSUPP;
> - }
> -
> - base = acpi_os_ioremap(asls, OPREGION_SIZE);
> - if (!base)
> - return -ENOMEM;
> -
> - if (memcmp(base, OPREGION_SIGNATURE, 16)) {
> - DRM_DEBUG_DRIVER("opregion signature mismatch\n");
> - err = -EINVAL;
> - goto err_out;
> - }
> - opregion->header = base;
> - opregion->vbt = base + OPREGION_VBT_OFFSET;
> -
> - opregion->lid_state = base + ACPI_CLID;
> -
> - mboxes = opregion->header->mboxes;
> - if (mboxes & MBOX_ACPI) {
> - DRM_DEBUG_DRIVER("Public ACPI methods supported\n");
> - opregion->acpi = base + OPREGION_ACPI_OFFSET;
> - }
> -
> - if (mboxes & MBOX_SWSCI) {
> - DRM_DEBUG_DRIVER("SWSCI supported\n");
> - opregion->swsci = base + OPREGION_SWSCI_OFFSET;
> - }
> - if (mboxes & MBOX_ASLE) {
> - DRM_DEBUG_DRIVER("ASLE supported\n");
> - opregion->asle = base + OPREGION_ASLE_OFFSET;
> - }
> -
> - return 0;
> -
> -err_out:
> - iounmap(base);
> - return err;
> -}
> diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
> index 4e5ff59..51565bb 100644
> --- a/drivers/gpu/drm/i915/intel_panel.c
> +++ b/drivers/gpu/drm/i915/intel_panel.c
> @@ -261,8 +261,8 @@ intel_panel_detect(struct drm_device *dev)
> * appears to be either the BIOS or Linux ACPI fault */
> #if 0
> /* Assume that the BIOS does not lie through the OpRegion... */
> - if (dev_priv->opregion.lid_state)
> - return ioread32(dev_priv->opregion.lid_state) & 0x1 ?
> + if (dev_priv->opregion_dev.opregion.acpi)
> + return ioread32(&dev_priv->opregion_dev.opregion.acpi->clid) & 0x1 ?
What guarantees that opregion.acpi != NULL here?
Or perhaps just remove that #if 0 code chunk altogether?
> connector_status_connected :
> connector_status_disconnected;
> #endif
> diff --git a/include/acpi/acpi_igd_opregion.h b/include/acpi/acpi_igd_opregion.h
> new file mode 100644
> index 0000000..36fefd2
> --- /dev/null
> +++ b/include/acpi/acpi_igd_opregion.h
> @@ -0,0 +1,105 @@
> +#ifndef __ACPI_IGD_OPREGION_H__
> +#define __ACPI_IGD_OPREGION_H__
> +
> +#include <drm/drmP.h>
> +
> +#define OPREGION_SIZE (8*1024)
> +
> +struct opregion_header {
> + u8 signature[16];
> + u32 size;
> + u32 opregion_ver;
> + u8 bios_ver[32];
> + u8 vbios_ver[16];
> + u8 driver_ver[16];
> + u32 mboxes;
> + u8 reserved[164];
> +} __packed;
> +
> +/* OpRegion mailbox #1: public ACPI methods */
> +struct opregion_acpi {
> + u32 drdy; /* driver readiness */
> + u32 csts; /* notification status */
> + u32 cevt; /* current event */
> + u8 rsvd1[20];
> + u32 didl[8]; /* supported display devices ID list */
> + u32 cpdl[8]; /* currently presented display list */
> + u32 cadl[8]; /* currently active display list */
> + u32 nadl[8]; /* next active devices list */
> + u32 aslp; /* ASL sleep time-out */
> + u32 tidx; /* toggle table index */
> + u32 chpd; /* current hotplug enable indicator */
> + u32 clid; /* current lid state*/
> + u32 cdck; /* current docking state */
> + u32 sxsw; /* Sx state resume */
> + u32 evts; /* ASL supported events */
> + u32 cnot; /* current OS notification */
> + u32 nrdy; /* driver status */
> + u8 rsvd2[60];
> +} __packed;
> +
> +/* OpRegion mailbox #2: SWSCI */
> +struct opregion_swsci {
> + u32 scic; /* SWSCI command|status|data */
> + u32 parm; /* command parameters */
> + u32 dslp; /* driver sleep time-out */
> + u8 rsvd[244];
> +} __packed;
> +
> +/* OpRegion mailbox #3: ASLE */
> +struct opregion_asle {
> + u32 ardy; /* driver readiness */
> + u32 aslc; /* ASLE interrupt command */
> + u32 tche; /* technology enabled indicator */
> + u32 alsi; /* current ALS illuminance reading */
> + u32 bclp; /* backlight brightness to set */
> + u32 pfit; /* panel fitting state */
> + u32 cblv; /* current brightness level */
> + u16 bclm[20]; /* backlight level duty cycle mapping table */
> + u32 cpfm; /* current panel fitting mode */
> + u32 epfm; /* enabled panel fitting modes */
> + u8 plut[74]; /* panel LUT and identifier */
> + u32 pfmb; /* PWM freq and min brightness */
> + u8 rsvd[102];
> +} __packed;
> +
> +struct igd_opregion {
> + struct opregion_header *header;
> + struct opregion_acpi *acpi;
> + struct opregion_swsci *swsci;
> + struct opregion_asle *asle;
> + void *vbt;
> +};
> +
> +struct opregion_dev {
> + struct drm_device *drm_dev;
> + u32 max_backlight;
> + void (*set_backlight)(struct drm_device *dev, u32 value);
> + void (*set_als_illum)(struct drm_device *dev, u32 alsi);
> + void (*set_pwm_freq)(struct drm_device *dev, u32 pfmb);
This gives the impression that systems using ASLE always run in combination
mode, with LBPC used for backlight setting, and ASLE_SET_PWM_FREQ used to
let the driver change BLC_PWM_CTL.
Current driver code doesn't quite follow the Intel documentation, e.g. it
never sets aslp and doesn't use bclm for backlight setting (but it's very
awkward to use).
> + void (*set_pfit)(struct drm_device *dev, u32 pfit);
> + void (*enable_asle)(struct drm_device *drm_dev);
> + struct igd_opregion opregion;
> +};
> +
> +#if (defined CONFIG_ACPI_IGD_OPREGION || defined CONFIG_ACPI_IGD_OPREGION_MODULE)
> +
> +int igd_opregion_setup(struct opregion_dev *dev);
> +void igd_opregion_init(struct opregion_dev *dev);
> +void igd_opregion_fini(struct opregion_dev *dev);
> +void igd_opregion_intr(struct opregion_dev *dev);
> +void igd_opregion_enable_asle(struct opregion_dev *dev);
> +
> +#else
> +
> +static inline int igd_opregion_setup(struct opregion_dev *dev)
> +{
> + return 0;
> +}
> +
> +static inline void igd_opregion_init(struct opregion_dev *dev) {};
> +static inline void igd_opregion_fini(struct opregion_dev *dev) {};
> +static inline void igd_opregion_intr(struct opregion_dev *dev) {};
> +static inline void igd_opregion_enable_asle(struct opregion_dev *dev) {};
> +#endif
> +#endif
> --
> 1.7.4.1
>
About the naming, as this is Intel-only intel_opregion seems clearer than
igd-opregion, which sounds like it could be anything.
Greetings,
Indan
More information about the dri-devel
mailing list