[PATCH] drm/radeon/kms: fix up r1xx-rs4xx i2c buses
Alex Deucher
alexdeucher at gmail.com
Tue May 3 16:47:44 PDT 2011
Fix the vbios mapping and only add the actual
buses that the cards have. The existing code was
mostly correct. Just clean up a few cases on r2xx/r3xx
and document that buses the hw actually has.
Signed-off-by: Alex Deucher <alexdeucher at gmail.com>
---
drivers/gpu/drm/radeon/radeon_combios.c | 59 ++++++++++++++++++++++--------
1 files changed, 43 insertions(+), 16 deletions(-)
diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c
index 089ab92..0e350b7 100644
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -505,12 +505,18 @@ static struct radeon_i2c_bus_rec combios_setup_i2c_bus(struct radeon_device *rde
* DDC_VGA = RADEON_GPIO_VGA_DDC
* DDC_LCD = RADEON_GPIOPAD_MASK
* DDC_GPIO = RADEON_MDGPIO_MASK
- * r1xx/r2xx
+ * r1xx
* DDC_MONID = RADEON_GPIO_MONID
* DDC_CRT2 = RADEON_GPIO_CRT2_DDC
- * r3xx
+ * r200
* DDC_MONID = RADEON_GPIO_MONID
* DDC_CRT2 = RADEON_GPIO_DVI_DDC
+ * r300/r350
+ * DDC_MONID = RADEON_GPIO_DVI_DDC
+ * DDC_CRT2 = RADEON_GPIO_DVI_DDC
+ * rv2xx/rv3xx
+ * DDC_MONID = RADEON_GPIO_MONID
+ * DDC_CRT2 = RADEON_GPIO_MONID
* rs3xx/rs4xx
* DDC_MONID = RADEON_GPIOPAD_MASK
* DDC_CRT2 = RADEON_GPIO_MONID
@@ -537,18 +543,21 @@ static struct radeon_i2c_bus_rec combios_setup_i2c_bus(struct radeon_device *rde
rdev->family == CHIP_RS400 ||
rdev->family == CHIP_RS480)
ddc_line = RADEON_GPIOPAD_MASK;
+ else if (rdev->family == CHIP_R300 ||
+ rdev->family == CHIP_R350)
+ ddc_line = RADEON_GPIO_DVI_DDC;
else
ddc_line = RADEON_GPIO_MONID;
break;
case DDC_CRT2:
- if (rdev->family == CHIP_RS300 ||
- rdev->family == CHIP_RS400 ||
- rdev->family == CHIP_RS480)
- ddc_line = RADEON_GPIO_MONID;
- else if (rdev->family >= CHIP_R300) {
+ if (rdev->family == CHIP_R200 ||
+ rdev->family == CHIP_R300 ||
+ rdev->family == CHIP_R350)
ddc_line = RADEON_GPIO_DVI_DDC;
- ddc = DDC_DVI;
- } else
+ else if (rdev->family == CHIP_RS300 ||
+ rdev->family >= CHIP_RV350)
+ ddc_line = RADEON_GPIO_MONID;
+ else
ddc_line = RADEON_GPIO_CRT2_DDC;
break;
}
@@ -709,26 +718,42 @@ void radeon_combios_i2c_init(struct radeon_device *rdev)
struct drm_device *dev = rdev->ddev;
struct radeon_i2c_bus_rec i2c;
+ /* actual hw pads
+ * r1xx/rs2xx/rs3xx
+ * 0x60, 0x64, 0x68, 0x6c, gpiopads, mm
+ * r200
+ * 0x60, 0x64, 0x68, mm
+ * r300/r350
+ * 0x60, 0x64, mm
+ * rv2xx/rv3xx/rs4xx
+ * 0x60, 0x64, 0x68, gpiopads, mm
+ */
+ /* 0x60 */
i2c = combios_setup_i2c_bus(rdev, DDC_DVI, 0, 0);
rdev->i2c_bus[0] = radeon_i2c_create(dev, &i2c, "DVI_DDC");
-
+ /* 0x64 */
i2c = combios_setup_i2c_bus(rdev, DDC_VGA, 0, 0);
rdev->i2c_bus[1] = radeon_i2c_create(dev, &i2c, "VGA_DDC");
+ /* mm i2c */
i2c.valid = true;
i2c.hw_capable = true;
i2c.mm_i2c = true;
i2c.i2c_id = 0xa0;
rdev->i2c_bus[2] = radeon_i2c_create(dev, &i2c, "MM_I2C");
- if (rdev->family == CHIP_RS300 ||
- rdev->family == CHIP_RS400 ||
- rdev->family == CHIP_RS480) {
+ if (rdev->family == CHIP_R300 ||
+ rdev->family == CHIP_R350) {
+ /* only 2 sw i2c pads */
+ } else if (rdev->family == CHIP_RS300 ||
+ rdev->family == CHIP_RS400 ||
+ rdev->family == CHIP_RS480) {
u16 offset;
u8 id, blocks, clk, data;
int i;
+ /* 0x68 */
i2c = combios_setup_i2c_bus(rdev, DDC_CRT2, 0, 0);
rdev->i2c_bus[3] = radeon_i2c_create(dev, &i2c, "MONID");
@@ -740,6 +765,7 @@ void radeon_combios_i2c_init(struct radeon_device *rdev)
if (id == 136) {
clk = RBIOS8(offset + 3 + (i * 5) + 3);
data = RBIOS8(offset + 3 + (i * 5) + 4);
+ /* gpiopad */
i2c = combios_setup_i2c_bus(rdev, DDC_MONID,
(1 << clk), (1 << data));
rdev->i2c_bus[4] = radeon_i2c_create(dev, &i2c, "GPIOPAD_MASK");
@@ -747,14 +773,15 @@ void radeon_combios_i2c_init(struct radeon_device *rdev)
}
}
}
-
- } else if (rdev->family >= CHIP_R300) {
+ } else if (rdev->family >= CHIP_R200) {
+ /* 0x68 */
i2c = combios_setup_i2c_bus(rdev, DDC_MONID, 0, 0);
rdev->i2c_bus[3] = radeon_i2c_create(dev, &i2c, "MONID");
} else {
+ /* 0x68 */
i2c = combios_setup_i2c_bus(rdev, DDC_MONID, 0, 0);
rdev->i2c_bus[3] = radeon_i2c_create(dev, &i2c, "MONID");
-
+ /* 0x6c */
i2c = combios_setup_i2c_bus(rdev, DDC_CRT2, 0, 0);
rdev->i2c_bus[4] = radeon_i2c_create(dev, &i2c, "CRT2_DDC");
}
--
1.7.1.1
More information about the dri-devel
mailing list