connector - encoder relationship

[Sascha Hauer]

Hi All,

I'm currently looking into implementing a SoC graphics core with KMS.

What I wonder about is the relationship between connectors and encoders.
On my board I have a sii9022 HDMI encoder connected via i2c. This chip
supports reading edid data, tracks the connection status of the display
and needs to be configured when the resolution changes. So my first
guess is that I have to implement an encoder. looking at struct
drm_encoder_funcs there are no callbacks suitable for this. struct
drm_connector_funcs on the other hand has all the callbacks I need.
Now I look at drivers/gpu/drm/i2c. The drivers there implement a
drm_encoder_slave which also has all the callbacks I need. So from
one point of view the functions should be implemented in the connector,
while in the i2c case it's implemented in the (slave-) encoder.
Generally I have the feeling that my sii9022 should be both an encoder
and a connector, but this doesn't fit into the current scheme.

I'm confused. Could someone clarify this a bit?

Thanks
 Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |