[Intel-gfx] [PATCH 3/7] drm/i915: Treat PCH eDP like DP in most places
Keith Packard
keithp at keithp.com
Wed Nov 2 10:35:35 PDT 2011
On Wed, 02 Nov 2011 11:29:53 -0400, Adam Jackson <ajax at redhat.com> wrote:
> Redundant. You've already done the link_configuration |= above in the
> common code. You can drop the second if chunk altogether.
Here's the new version of that chunk of patch:
@@ -850,32 +864,45 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE;
intel_write_eld(encoder, adjusted_mode);
}
-
memset(intel_dp->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE);
intel_dp->link_configuration[0] = intel_dp->link_bw;
intel_dp->link_configuration[1] = intel_dp->lane_count;
intel_dp->link_configuration[8] = DP_SET_ANSI_8B10B;
-
/*
* Check for DPCD version > 1.1 and enhanced framing support
*/
if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 &&
(intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP)) {
intel_dp->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
- intel_dp->DP |= DP_ENHANCED_FRAMING;
}
- /* CPT DP's pipe select is decided in TRANS_DP_CTL */
- if (intel_crtc->pipe == 1 && !HAS_PCH_CPT(dev))
- intel_dp->DP |= DP_PIPEB_SELECT;
+ /* Split out the IBX/CPU vs CPT settings */
- if (is_cpu_edp(intel_dp)) {
- /* don't miss out required setting for eDP */
- intel_dp->DP |= DP_PLL_ENABLE;
- if (adjusted_mode->clock < 200000)
- intel_dp->DP |= DP_PLL_FREQ_160MHZ;
- else
- intel_dp->DP |= DP_PLL_FREQ_270MHZ;
+ if (!HAS_PCH_CPT(dev) || is_cpu_edp(intel_dp)) {
+ intel_dp->DP |= intel_dp->color_range;
+
+ if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+ intel_dp->DP |= DP_SYNC_HS_HIGH;
+ if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+ intel_dp->DP |= DP_SYNC_VS_HIGH;
+ intel_dp->DP |= DP_LINK_TRAIN_OFF;
+
+ if (intel_dp->link_configuration[1] & DP_LANE_COUNT_ENHANCED_FRAME_EN)
+ intel_dp->DP |= DP_ENHANCED_FRAMING;
+
+ if (intel_crtc->pipe == 1)
+ intel_dp->DP |= DP_PIPEB_SELECT;
+
+ if (is_cpu_edp(intel_dp)) {
+ /* don't miss out required setting for eDP */
+ intel_dp->DP |= DP_PLL_ENABLE;
+ if (adjusted_mode->clock < 200000)
+ intel_dp->DP |= DP_PLL_FREQ_160MHZ;
+ else
+ intel_dp->DP |= DP_PLL_FREQ_270MHZ;
+ }
+ } else {
+ intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
}
}
--
keith.packard at intel.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 827 bytes
Desc: not available
URL: <http://lists.freedesktop.org/archives/dri-devel/attachments/20111102/23ce8d10/attachment-0001.pgp>
More information about the dri-devel
mailing list