[PATCH 11/12] gma500: Add support for Cedarview
Alan Cox
alan at lxorguk.ukuu.org.uk
Thu Nov 3 11:22:37 PDT 2011
From: Alan Cox <alan at linux.intel.com>
Again this is similar but has some differences so we have a set of plug in
support. This does make the driver bigger than is needed in some respects
but the tradeoff for maintainability is huge.
Signed-off-by: Alan Cox <alan at linux.intel.com>
---
drivers/gpu/drm/gma500/cdv_device.c | 351 +++++++
drivers/gpu/drm/gma500/cdv_device.h | 36 +
drivers/gpu/drm/gma500/cdv_intel_crt.c | 326 ++++++
drivers/gpu/drm/gma500/cdv_intel_display.c | 1508 ++++++++++++++++++++++++++++
drivers/gpu/drm/gma500/cdv_intel_hdmi.c | 376 +++++++
drivers/gpu/drm/gma500/cdv_intel_lvds.c | 721 +++++++++++++
6 files changed, 3318 insertions(+), 0 deletions(-)
create mode 100644 drivers/gpu/drm/gma500/cdv_device.c
create mode 100644 drivers/gpu/drm/gma500/cdv_device.h
create mode 100644 drivers/gpu/drm/gma500/cdv_intel_crt.c
create mode 100644 drivers/gpu/drm/gma500/cdv_intel_display.c
create mode 100644 drivers/gpu/drm/gma500/cdv_intel_hdmi.c
create mode 100644 drivers/gpu/drm/gma500/cdv_intel_lvds.c
diff --git a/drivers/gpu/drm/gma500/cdv_device.c b/drivers/gpu/drm/gma500/cdv_device.c
new file mode 100644
index 0000000..87614e0
--- /dev/null
+++ b/drivers/gpu/drm/gma500/cdv_device.c
@@ -0,0 +1,351 @@
+/**************************************************************************
+ * Copyright (c) 2011, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ **************************************************************************/
+
+#include <linux/backlight.h>
+#include <drm/drmP.h>
+#include <drm/drm.h>
+#include "psb_drm.h"
+#include "psb_drv.h"
+#include "psb_reg.h"
+#include "psb_intel_reg.h"
+#include "intel_bios.h"
+#include "cdv_device.h"
+
+#define VGA_SR_INDEX 0x3c4
+#define VGA_SR_DATA 0x3c5
+
+/* FIXME: should check if we are the active VGA device ?? */
+static void cdv_disable_vga(struct drm_device *dev)
+{
+ u8 sr1;
+ u32 vga_reg;
+
+ vga_reg = VGACNTRL;
+
+ outb(1, VGA_SR_INDEX);
+ sr1 = inb(VGA_SR_DATA);
+ outb(sr1 | 1<<5, VGA_SR_DATA);
+ udelay(300);
+
+ REG_WRITE(vga_reg, VGA_DISP_DISABLE);
+ REG_READ(vga_reg);
+}
+
+static int cdv_output_init(struct drm_device *dev)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ cdv_disable_vga(dev);
+
+ cdv_intel_crt_init(dev, &dev_priv->mode_dev);
+ cdv_intel_lvds_init(dev, &dev_priv->mode_dev);
+
+ /* These bits indicate HDMI not SDVO on CDV, but we don't yet support
+ the HDMI interface */
+ if (REG_READ(SDVOB) & SDVO_DETECTED)
+ cdv_hdmi_init(dev, &dev_priv->mode_dev, SDVOB);
+ if (REG_READ(SDVOC) & SDVO_DETECTED)
+ cdv_hdmi_init(dev, &dev_priv->mode_dev, SDVOC);
+ return 0;
+}
+
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+
+/*
+ * Poulsbo Backlight Interfaces
+ */
+
+#define BLC_PWM_PRECISION_FACTOR 100 /* 10000000 */
+#define BLC_PWM_FREQ_CALC_CONSTANT 32
+#define MHz 1000000
+
+#define PSB_BLC_PWM_PRECISION_FACTOR 10
+#define PSB_BLC_MAX_PWM_REG_FREQ 0xFFFE
+#define PSB_BLC_MIN_PWM_REG_FREQ 0x2
+
+#define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)
+#define PSB_BACKLIGHT_PWM_CTL_SHIFT (16)
+
+static int cdv_brightness;
+static struct backlight_device *cdv_backlight_device;
+
+static int cdv_get_brightness(struct backlight_device *bd)
+{
+ /* return locally cached var instead of HW read (due to DPST etc.) */
+ /* FIXME: ideally return actual value in case firmware fiddled with
+ it */
+ return cdv_brightness;
+}
+
+
+static int cdv_backlight_setup(struct drm_device *dev)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ unsigned long core_clock;
+ /* u32 bl_max_freq; */
+ /* unsigned long value; */
+ u16 bl_max_freq;
+ uint32_t value;
+ uint32_t blc_pwm_precision_factor;
+
+ /* get bl_max_freq and pol from dev_priv*/
+ if (!dev_priv->lvds_bl) {
+ dev_err(dev->dev, "Has no valid LVDS backlight info\n");
+ return -ENOENT;
+ }
+ bl_max_freq = dev_priv->lvds_bl->freq;
+ blc_pwm_precision_factor = PSB_BLC_PWM_PRECISION_FACTOR;
+
+ core_clock = dev_priv->core_freq;
+
+ value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT;
+ value *= blc_pwm_precision_factor;
+ value /= bl_max_freq;
+ value /= blc_pwm_precision_factor;
+
+ if (value > (unsigned long long)PSB_BLC_MAX_PWM_REG_FREQ ||
+ value < (unsigned long long)PSB_BLC_MIN_PWM_REG_FREQ)
+ return -ERANGE;
+ else {
+ /* FIXME */
+ }
+ return 0;
+}
+
+static int cdv_set_brightness(struct backlight_device *bd)
+{
+ int level = bd->props.brightness;
+
+ /* Percentage 1-100% being valid */
+ if (level < 1)
+ level = 1;
+
+ /*cdv_intel_lvds_set_brightness(dev, level); FIXME */
+ cdv_brightness = level;
+ return 0;
+}
+
+static const struct backlight_ops cdv_ops = {
+ .get_brightness = cdv_get_brightness,
+ .update_status = cdv_set_brightness,
+};
+
+static int cdv_backlight_init(struct drm_device *dev)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ int ret;
+ struct backlight_properties props;
+
+ memset(&props, 0, sizeof(struct backlight_properties));
+ props.max_brightness = 100;
+ props.type = BACKLIGHT_PLATFORM;
+
+ cdv_backlight_device = backlight_device_register("psb-bl",
+ NULL, (void *)dev, &cdv_ops, &props);
+ if (IS_ERR(cdv_backlight_device))
+ return PTR_ERR(cdv_backlight_device);
+
+ ret = cdv_backlight_setup(dev);
+ if (ret < 0) {
+ backlight_device_unregister(cdv_backlight_device);
+ cdv_backlight_device = NULL;
+ return ret;
+ }
+ cdv_backlight_device->props.brightness = 100;
+ cdv_backlight_device->props.max_brightness = 100;
+ backlight_update_status(cdv_backlight_device);
+ dev_priv->backlight_device = cdv_backlight_device;
+ return 0;
+}
+
+#endif
+
+/*
+ * Provide the Cedarview specific chip logic and low level methods
+ * for power management
+ *
+ * FIXME: we need to implement the apm/ospm base management bits
+ * for this and the MID devices.
+ */
+
+static inline u32 CDV_MSG_READ32(uint port, uint offset)
+{
+ int mcr = (0x10<<24) | (port << 16) | (offset << 8);
+ uint32_t ret_val = 0;
+ struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
+ pci_write_config_dword(pci_root, 0xD0, mcr);
+ pci_read_config_dword(pci_root, 0xD4, &ret_val);
+ pci_dev_put(pci_root);
+ return ret_val;
+}
+
+static inline void CDV_MSG_WRITE32(uint port, uint offset, u32 value)
+{
+ int mcr = (0x11<<24) | (port << 16) | (offset << 8) | 0xF0;
+ struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
+ pci_write_config_dword(pci_root, 0xD4, value);
+ pci_write_config_dword(pci_root, 0xD0, mcr);
+ pci_dev_put(pci_root);
+}
+
+#define PSB_APM_CMD 0x0
+#define PSB_APM_STS 0x04
+#define PSB_PM_SSC 0x20
+#define PSB_PM_SSS 0x30
+#define PSB_PWRGT_GFX_MASK 0x3
+#define CDV_PWRGT_DISPLAY_CNTR 0x000fc00c
+#define CDV_PWRGT_DISPLAY_STS 0x000fc00c
+
+static void cdv_init_pm(struct drm_device *dev)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ u32 pwr_cnt;
+ int i;
+
+ dev_priv->apm_base = CDV_MSG_READ32(PSB_PUNIT_PORT,
+ PSB_APMBA) & 0xFFFF;
+ dev_priv->ospm_base = CDV_MSG_READ32(PSB_PUNIT_PORT,
+ PSB_OSPMBA) & 0xFFFF;
+
+ /* Force power on for now */
+ pwr_cnt = inl(dev_priv->apm_base + PSB_APM_CMD);
+ pwr_cnt &= ~PSB_PWRGT_GFX_MASK;
+
+ outl(pwr_cnt, dev_priv->apm_base + PSB_APM_CMD);
+ for (i = 0; i < 5; i++) {
+ u32 pwr_sts = inl(dev_priv->apm_base + PSB_APM_STS);
+ if ((pwr_sts & PSB_PWRGT_GFX_MASK) == 0)
+ break;
+ udelay(10);
+ }
+ pwr_cnt = inl(dev_priv->ospm_base + PSB_PM_SSC);
+ pwr_cnt &= ~CDV_PWRGT_DISPLAY_CNTR;
+ outl(pwr_cnt, dev_priv->ospm_base + PSB_PM_SSC);
+ for (i = 0; i < 5; i++) {
+ u32 pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
+ if ((pwr_sts & CDV_PWRGT_DISPLAY_STS) == 0)
+ break;
+ udelay(10);
+ }
+}
+
+/**
+ * cdv_save_display_registers - save registers lost on suspend
+ * @dev: our DRM device
+ *
+ * Save the state we need in order to be able to restore the interface
+ * upon resume from suspend
+ *
+ * FIXME: review
+ */
+static int cdv_save_display_registers(struct drm_device *dev)
+{
+ return 0;
+}
+
+/**
+ * cdv_restore_display_registers - restore lost register state
+ * @dev: our DRM device
+ *
+ * Restore register state that was lost during suspend and resume.
+ *
+ * FIXME: review
+ */
+static int cdv_restore_display_registers(struct drm_device *dev)
+{
+ return 0;
+}
+
+static int cdv_power_down(struct drm_device *dev)
+{
+ return 0;
+}
+
+static int cdv_power_up(struct drm_device *dev)
+{
+ return 0;
+}
+
+/* FIXME ? - shared with Poulsbo */
+static void cdv_get_core_freq(struct drm_device *dev)
+{
+ uint32_t clock;
+ struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
+ struct drm_psb_private *dev_priv = dev->dev_private;
+
+ pci_write_config_dword(pci_root, 0xD0, 0xD0050300);
+ pci_read_config_dword(pci_root, 0xD4, &clock);
+ pci_dev_put(pci_root);
+
+ switch (clock & 0x07) {
+ case 0:
+ dev_priv->core_freq = 100;
+ break;
+ case 1:
+ dev_priv->core_freq = 133;
+ break;
+ case 2:
+ dev_priv->core_freq = 150;
+ break;
+ case 3:
+ dev_priv->core_freq = 178;
+ break;
+ case 4:
+ dev_priv->core_freq = 200;
+ break;
+ case 5:
+ case 6:
+ case 7:
+ dev_priv->core_freq = 266;
+ default:
+ dev_priv->core_freq = 0;
+ }
+}
+
+static int cdv_chip_setup(struct drm_device *dev)
+{
+ cdv_get_core_freq(dev);
+ gma_intel_opregion_init(dev);
+ psb_intel_init_bios(dev);
+ return 0;
+}
+
+/* CDV is much like Poulsbo but has MID like SGX offsets and PM */
+
+const struct psb_ops cdv_chip_ops = {
+ .name = "Cedartrail",
+ .accel_2d = 0,
+ .pipes = 2,
+ .sgx_offset = MRST_SGX_OFFSET,
+ .chip_setup = cdv_chip_setup,
+
+ .crtc_helper = &cdv_intel_helper_funcs,
+ .crtc_funcs = &cdv_intel_crtc_funcs,
+
+ .output_init = cdv_output_init,
+
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+ .backlight_init = cdv_backlight_init,
+#endif
+
+ .init_pm = cdv_init_pm,
+ .save_regs = cdv_save_display_registers,
+ .restore_regs = cdv_restore_display_registers,
+ .power_down = cdv_power_down,
+ .power_up = cdv_power_up,
+};
diff --git a/drivers/gpu/drm/gma500/cdv_device.h b/drivers/gpu/drm/gma500/cdv_device.h
new file mode 100644
index 0000000..2a88b7b
--- /dev/null
+++ b/drivers/gpu/drm/gma500/cdv_device.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright © 2011 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+extern const struct drm_crtc_helper_funcs cdv_intel_helper_funcs;
+extern const struct drm_crtc_funcs cdv_intel_crtc_funcs;
+extern void cdv_intel_crt_init(struct drm_device *dev,
+ struct psb_intel_mode_device *mode_dev);
+extern void cdv_intel_lvds_init(struct drm_device *dev,
+ struct psb_intel_mode_device *mode_dev);
+extern void cdv_hdmi_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev,
+ int reg);
+extern struct drm_display_mode *cdv_intel_crtc_mode_get(struct drm_device *dev,
+ struct drm_crtc *crtc);
+
+extern inline void cdv_intel_wait_for_vblank(struct drm_device *dev)
+{
+ /* Wait for 20ms, i.e. one cycle at 50hz. */
+ /* FIXME: msleep ?? */
+ mdelay(20);
+}
+
+
diff --git a/drivers/gpu/drm/gma500/cdv_intel_crt.c b/drivers/gpu/drm/gma500/cdv_intel_crt.c
new file mode 100644
index 0000000..efda63b
--- /dev/null
+++ b/drivers/gpu/drm/gma500/cdv_intel_crt.c
@@ -0,0 +1,326 @@
+/*
+ * Copyright © 2006-2007 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ * Eric Anholt <eric at anholt.net>
+ */
+
+#include <linux/i2c.h>
+#include <drm/drmP.h>
+
+#include "intel_bios.h"
+#include "psb_drv.h"
+#include "psb_intel_drv.h"
+#include "psb_intel_reg.h"
+#include "power.h"
+#include <linux/pm_runtime.h>
+
+
+static void cdv_intel_crt_dpms(struct drm_encoder *encoder, int mode)
+{
+ struct drm_device *dev = encoder->dev;
+ u32 temp, reg;
+ reg = ADPA;
+
+ temp = REG_READ(reg);
+ temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
+ temp &= ~ADPA_DAC_ENABLE;
+
+ switch (mode) {
+ case DRM_MODE_DPMS_ON:
+ temp |= ADPA_DAC_ENABLE;
+ break;
+ case DRM_MODE_DPMS_STANDBY:
+ temp |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE;
+ break;
+ case DRM_MODE_DPMS_SUSPEND:
+ temp |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE;
+ break;
+ case DRM_MODE_DPMS_OFF:
+ temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
+ break;
+ }
+
+ REG_WRITE(reg, temp);
+}
+
+static int cdv_intel_crt_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ int max_clock = 0;
+ if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+ return MODE_NO_DBLESCAN;
+
+ /* The lowest clock for CDV is 20000KHz */
+ if (mode->clock < 20000)
+ return MODE_CLOCK_LOW;
+
+ /* The max clock for CDV is 355 instead of 400 */
+ max_clock = 355000;
+ if (mode->clock > max_clock)
+ return MODE_CLOCK_HIGH;
+
+ if (mode->hdisplay > 1680 || mode->vdisplay > 1050)
+ return MODE_PANEL;
+
+ return MODE_OK;
+}
+
+static bool cdv_intel_crt_mode_fixup(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ return true;
+}
+
+static void cdv_intel_crt_mode_set(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+
+ struct drm_device *dev = encoder->dev;
+ struct drm_crtc *crtc = encoder->crtc;
+ struct psb_intel_crtc *psb_intel_crtc =
+ to_psb_intel_crtc(crtc);
+ int dpll_md_reg;
+ u32 adpa, dpll_md;
+ u32 adpa_reg;
+
+ if (psb_intel_crtc->pipe == 0)
+ dpll_md_reg = DPLL_A_MD;
+ else
+ dpll_md_reg = DPLL_B_MD;
+
+ adpa_reg = ADPA;
+
+ /*
+ * Disable separate mode multiplier used when cloning SDVO to CRT
+ * XXX this needs to be adjusted when we really are cloning
+ */
+ {
+ dpll_md = REG_READ(dpll_md_reg);
+ REG_WRITE(dpll_md_reg,
+ dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK);
+ }
+
+ adpa = 0;
+ if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+ adpa |= ADPA_HSYNC_ACTIVE_HIGH;
+ if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+ adpa |= ADPA_VSYNC_ACTIVE_HIGH;
+
+ if (psb_intel_crtc->pipe == 0)
+ adpa |= ADPA_PIPE_A_SELECT;
+ else
+ adpa |= ADPA_PIPE_B_SELECT;
+
+ REG_WRITE(adpa_reg, adpa);
+}
+
+
+/**
+ * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect CRT presence.
+ *
+ * \return true if CRT is connected.
+ * \return false if CRT is disconnected.
+ */
+static bool cdv_intel_crt_detect_hotplug(struct drm_connector *connector,
+ bool force)
+{
+ struct drm_device *dev = connector->dev;
+ u32 hotplug_en;
+ int i, tries = 0, ret = false;
+ u32 adpa_orig;
+
+ /* disable the DAC when doing the hotplug detection */
+
+ adpa_orig = REG_READ(ADPA);
+
+ REG_WRITE(ADPA, adpa_orig & ~(ADPA_DAC_ENABLE));
+
+ /*
+ * On a CDV thep, CRT detect sequence need to be done twice
+ * to get a reliable result.
+ */
+ tries = 2;
+
+ hotplug_en = REG_READ(PORT_HOTPLUG_EN);
+ hotplug_en &= ~(CRT_HOTPLUG_DETECT_MASK);
+ hotplug_en |= CRT_HOTPLUG_FORCE_DETECT;
+
+ hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
+ hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
+
+ for (i = 0; i < tries ; i++) {
+ unsigned long timeout;
+ /* turn on the FORCE_DETECT */
+ REG_WRITE(PORT_HOTPLUG_EN, hotplug_en);
+ timeout = jiffies + msecs_to_jiffies(1000);
+ /* wait for FORCE_DETECT to go off */
+ do {
+ if (!(REG_READ(PORT_HOTPLUG_EN) &
+ CRT_HOTPLUG_FORCE_DETECT))
+ break;
+ msleep(1);
+ } while (time_after(timeout, jiffies));
+ }
+
+ if ((REG_READ(PORT_HOTPLUG_STAT) & CRT_HOTPLUG_MONITOR_MASK) !=
+ CRT_HOTPLUG_MONITOR_NONE)
+ ret = true;
+
+ /* Restore the saved ADPA */
+ REG_WRITE(ADPA, adpa_orig);
+ return ret;
+}
+
+static enum drm_connector_status cdv_intel_crt_detect(
+ struct drm_connector *connector, bool force)
+{
+ if (cdv_intel_crt_detect_hotplug(connector, force))
+ return connector_status_connected;
+ else
+ return connector_status_disconnected;
+}
+
+static void cdv_intel_crt_destroy(struct drm_connector *connector)
+{
+ struct psb_intel_output *intel_output = to_psb_intel_output(connector);
+
+ psb_intel_i2c_destroy(intel_output->ddc_bus);
+ drm_sysfs_connector_remove(connector);
+ drm_connector_cleanup(connector);
+ kfree(connector);
+}
+
+static int cdv_intel_crt_get_modes(struct drm_connector *connector)
+{
+ struct psb_intel_output *intel_output =
+ to_psb_intel_output(connector);
+ return psb_intel_ddc_get_modes(intel_output);
+}
+
+static int cdv_intel_crt_set_property(struct drm_connector *connector,
+ struct drm_property *property,
+ uint64_t value)
+{
+ return 0;
+}
+
+/*
+ * Routines for controlling stuff on the analog port
+ */
+
+static const struct drm_encoder_helper_funcs cdv_intel_crt_helper_funcs = {
+ .dpms = cdv_intel_crt_dpms,
+ .mode_fixup = cdv_intel_crt_mode_fixup,
+ .prepare = psb_intel_encoder_prepare,
+ .commit = psb_intel_encoder_commit,
+ .mode_set = cdv_intel_crt_mode_set,
+};
+
+static const struct drm_connector_funcs cdv_intel_crt_connector_funcs = {
+ .dpms = drm_helper_connector_dpms,
+ .detect = cdv_intel_crt_detect,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .destroy = cdv_intel_crt_destroy,
+ .set_property = cdv_intel_crt_set_property,
+};
+
+static const struct drm_connector_helper_funcs
+ cdv_intel_crt_connector_helper_funcs = {
+ .mode_valid = cdv_intel_crt_mode_valid,
+ .get_modes = cdv_intel_crt_get_modes,
+ .best_encoder = psb_intel_best_encoder,
+};
+
+static void cdv_intel_crt_enc_destroy(struct drm_encoder *encoder)
+{
+ drm_encoder_cleanup(encoder);
+}
+
+static const struct drm_encoder_funcs cdv_intel_crt_enc_funcs = {
+ .destroy = cdv_intel_crt_enc_destroy,
+};
+
+void cdv_intel_crt_init(struct drm_device *dev,
+ struct psb_intel_mode_device *mode_dev)
+{
+
+ struct psb_intel_output *psb_intel_output;
+ struct drm_connector *connector;
+ struct drm_encoder *encoder;
+
+ u32 i2c_reg;
+
+ psb_intel_output = kzalloc(sizeof(struct psb_intel_output), GFP_KERNEL);
+ if (!psb_intel_output)
+ return;
+
+ psb_intel_output->mode_dev = mode_dev;
+ connector = &psb_intel_output->base;
+ drm_connector_init(dev, connector,
+ &cdv_intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
+
+ encoder = &psb_intel_output->enc;
+ drm_encoder_init(dev, encoder,
+ &cdv_intel_crt_enc_funcs, DRM_MODE_ENCODER_DAC);
+
+ drm_mode_connector_attach_encoder(&psb_intel_output->base,
+ &psb_intel_output->enc);
+
+ /* Set up the DDC bus. */
+ i2c_reg = GPIOA;
+ /* Remove the following code for CDV */
+ /*
+ if (dev_priv->crt_ddc_bus != 0)
+ i2c_reg = dev_priv->crt_ddc_bus;
+ }*/
+ psb_intel_output->ddc_bus = psb_intel_i2c_create(dev,
+ i2c_reg, "CRTDDC_A");
+ if (!psb_intel_output->ddc_bus) {
+ dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
+ "failed.\n");
+ goto failed_ddc;
+ }
+
+ psb_intel_output->type = INTEL_OUTPUT_ANALOG;
+ /*
+ psb_intel_output->clone_mask = (1 << INTEL_ANALOG_CLONE_BIT);
+ psb_intel_output->crtc_mask = (1 << 0) | (1 << 1);
+ */
+ connector->interlace_allowed = 0;
+ connector->doublescan_allowed = 0;
+
+ drm_encoder_helper_add(encoder, &cdv_intel_crt_helper_funcs);
+ drm_connector_helper_add(connector,
+ &cdv_intel_crt_connector_helper_funcs);
+
+ drm_sysfs_connector_add(connector);
+
+ return;
+failed_ddc:
+ drm_encoder_cleanup(&psb_intel_output->enc);
+ drm_connector_cleanup(&psb_intel_output->base);
+ kfree(psb_intel_output);
+ return;
+}
diff --git a/drivers/gpu/drm/gma500/cdv_intel_display.c b/drivers/gpu/drm/gma500/cdv_intel_display.c
new file mode 100644
index 0000000..7b97c60
--- /dev/null
+++ b/drivers/gpu/drm/gma500/cdv_intel_display.c
@@ -0,0 +1,1508 @@
+/*
+ * Copyright © 2006-2011 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authors:
+ * Eric Anholt <eric at anholt.net>
+ */
+
+#include <linux/i2c.h>
+#include <linux/pm_runtime.h>
+
+#include <drm/drmP.h>
+#include "framebuffer.h"
+#include "psb_drv.h"
+#include "psb_intel_drv.h"
+#include "psb_intel_reg.h"
+#include "psb_intel_display.h"
+#include "power.h"
+#include "cdv_device.h"
+
+
+struct cdv_intel_range_t {
+ int min, max;
+};
+
+struct cdv_intel_p2_t {
+ int dot_limit;
+ int p2_slow, p2_fast;
+};
+
+struct cdv_intel_clock_t {
+ /* given values */
+ int n;
+ int m1, m2;
+ int p1, p2;
+ /* derived values */
+ int dot;
+ int vco;
+ int m;
+ int p;
+};
+
+#define INTEL_P2_NUM 2
+
+struct cdv_intel_limit_t {
+ struct cdv_intel_range_t dot, vco, n, m, m1, m2, p, p1;
+ struct cdv_intel_p2_t p2;
+};
+
+#define CDV_LIMIT_SINGLE_LVDS_96 0
+#define CDV_LIMIT_SINGLE_LVDS_100 1
+#define CDV_LIMIT_DAC_HDMI_27 2
+#define CDV_LIMIT_DAC_HDMI_96 3
+
+static const struct cdv_intel_limit_t cdv_intel_limits[] = {
+ { /* CDV_SIGNLE_LVDS_96MHz */
+ .dot = {.min = 20000, .max = 115500},
+ .vco = {.min = 1800000, .max = 3600000},
+ .n = {.min = 2, .max = 6},
+ .m = {.min = 60, .max = 160},
+ .m1 = {.min = 0, .max = 0},
+ .m2 = {.min = 58, .max = 158},
+ .p = {.min = 28, .max = 140},
+ .p1 = {.min = 2, .max = 10},
+ .p2 = {.dot_limit = 200000,
+ .p2_slow = 14, .p2_fast = 14},
+ },
+ { /* CDV_SINGLE_LVDS_100MHz */
+ .dot = {.min = 20000, .max = 115500},
+ .vco = {.min = 1800000, .max = 3600000},
+ .n = {.min = 2, .max = 6},
+ .m = {.min = 60, .max = 160},
+ .m1 = {.min = 0, .max = 0},
+ .m2 = {.min = 58, .max = 158},
+ .p = {.min = 28, .max = 140},
+ .p1 = {.min = 2, .max = 10},
+ /* The single-channel range is 25-112Mhz, and dual-channel
+ * is 80-224Mhz. Prefer single channel as much as possible.
+ */
+ .p2 = {.dot_limit = 200000, .p2_slow = 14, .p2_fast = 14},
+ },
+ { /* CDV_DAC_HDMI_27MHz */
+ .dot = {.min = 20000, .max = 400000},
+ .vco = {.min = 1809000, .max = 3564000},
+ .n = {.min = 1, .max = 1},
+ .m = {.min = 67, .max = 132},
+ .m1 = {.min = 0, .max = 0},
+ .m2 = {.min = 65, .max = 130},
+ .p = {.min = 5, .max = 90},
+ .p1 = {.min = 1, .max = 9},
+ .p2 = {.dot_limit = 225000, .p2_slow = 10, .p2_fast = 5},
+ },
+ { /* CDV_DAC_HDMI_96MHz */
+ .dot = {.min = 20000, .max = 400000},
+ .vco = {.min = 1800000, .max = 3600000},
+ .n = {.min = 2, .max = 6},
+ .m = {.min = 60, .max = 160},
+ .m1 = {.min = 0, .max = 0},
+ .m2 = {.min = 58, .max = 158},
+ .p = {.min = 5, .max = 100},
+ .p1 = {.min = 1, .max = 10},
+ .p2 = {.dot_limit = 225000, .p2_slow = 10, .p2_fast = 5},
+ },
+};
+
+#define _wait_for(COND, MS, W) ({ \
+ unsigned long timeout__ = jiffies + msecs_to_jiffies(MS); \
+ int ret__ = 0; \
+ while (!(COND)) { \
+ if (time_after(jiffies, timeout__)) { \
+ ret__ = -ETIMEDOUT; \
+ break; \
+ } \
+ if (W && !in_dbg_master()) \
+ msleep(W); \
+ } \
+ ret__; \
+})
+
+#define wait_for(COND, MS) _wait_for(COND, MS, 1)
+
+
+static int cdv_sb_read(struct drm_device *dev, u32 reg, u32 *val)
+{
+ int ret;
+
+ ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000);
+ if (ret) {
+ DRM_ERROR("timeout waiting for SB to idle before read\n");
+ return ret;
+ }
+
+ REG_WRITE(SB_ADDR, reg);
+ REG_WRITE(SB_PCKT,
+ SET_FIELD(SB_OPCODE_READ, SB_OPCODE) |
+ SET_FIELD(SB_DEST_DPLL, SB_DEST) |
+ SET_FIELD(0xf, SB_BYTE_ENABLE));
+
+ ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000);
+ if (ret) {
+ DRM_ERROR("timeout waiting for SB to idle after read\n");
+ return ret;
+ }
+
+ *val = REG_READ(SB_DATA);
+
+ return 0;
+}
+
+static int cdv_sb_write(struct drm_device *dev, u32 reg, u32 val)
+{
+ int ret;
+ static bool dpio_debug = true;
+ u32 temp;
+
+ if (dpio_debug) {
+ if (cdv_sb_read(dev, reg, &temp) == 0)
+ DRM_DEBUG_KMS("0x%08x: 0x%08x (before)\n", reg, temp);
+ DRM_DEBUG_KMS("0x%08x: 0x%08x\n", reg, val);
+ }
+
+ ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000);
+ if (ret) {
+ DRM_ERROR("timeout waiting for SB to idle before write\n");
+ return ret;
+ }
+
+ REG_WRITE(SB_ADDR, reg);
+ REG_WRITE(SB_DATA, val);
+ REG_WRITE(SB_PCKT,
+ SET_FIELD(SB_OPCODE_WRITE, SB_OPCODE) |
+ SET_FIELD(SB_DEST_DPLL, SB_DEST) |
+ SET_FIELD(0xf, SB_BYTE_ENABLE));
+
+ ret = wait_for((REG_READ(SB_PCKT) & SB_BUSY) == 0, 1000);
+ if (ret) {
+ DRM_ERROR("timeout waiting for SB to idle after write\n");
+ return ret;
+ }
+
+ if (dpio_debug) {
+ if (cdv_sb_read(dev, reg, &temp) == 0)
+ DRM_DEBUG_KMS("0x%08x: 0x%08x (after)\n", reg, temp);
+ }
+
+ return 0;
+}
+
+/* Reset the DPIO configuration register. The BIOS does this at every
+ * mode set.
+ */
+static void cdv_sb_reset(struct drm_device *dev)
+{
+
+ REG_WRITE(DPIO_CFG, 0);
+ REG_READ(DPIO_CFG);
+ REG_WRITE(DPIO_CFG, DPIO_MODE_SELECT_0 | DPIO_CMN_RESET_N);
+}
+
+/* Unlike most Intel display engines, on Cedarview the DPLL registers
+ * are behind this sideband bus. They must be programmed while the
+ * DPLL reference clock is on in the DPLL control register, but before
+ * the DPLL is enabled in the DPLL control register.
+ */
+static int
+cdv_dpll_set_clock_cdv(struct drm_device *dev, struct drm_crtc *crtc,
+ struct cdv_intel_clock_t *clock)
+{
+ struct psb_intel_crtc *psb_crtc =
+ to_psb_intel_crtc(crtc);
+ int pipe = psb_crtc->pipe;
+ u32 m, n_vco, p;
+ int ret = 0;
+ int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
+ u32 ref_value;
+
+ cdv_sb_reset(dev);
+
+ if ((REG_READ(dpll_reg) & DPLL_SYNCLOCK_ENABLE) == 0) {
+ DRM_ERROR("Attempting to set DPLL with refclk disabled\n");
+ return -EBUSY;
+ }
+
+ /* Follow the BIOS and write the REF/SFR Register. Hardcoded value */
+ ref_value = 0x68A701;
+
+ cdv_sb_write(dev, SB_REF_SFR(pipe), ref_value);
+
+ /* We don't know what the other fields of these regs are, so
+ * leave them in place.
+ */
+ ret = cdv_sb_read(dev, SB_M(pipe), &m);
+ if (ret)
+ return ret;
+ m &= ~SB_M_DIVIDER_MASK;
+ m |= ((clock->m2) << SB_M_DIVIDER_SHIFT);
+ ret = cdv_sb_write(dev, SB_M(pipe), m);
+ if (ret)
+ return ret;
+
+ ret = cdv_sb_read(dev, SB_N_VCO(pipe), &n_vco);
+ if (ret)
+ return ret;
+
+ /* Follow the BIOS to program the N_DIVIDER REG */
+ n_vco &= 0xFFFF;
+ n_vco |= 0x107;
+ n_vco &= ~(SB_N_VCO_SEL_MASK |
+ SB_N_DIVIDER_MASK |
+ SB_N_CB_TUNE_MASK);
+
+ n_vco |= ((clock->n) << SB_N_DIVIDER_SHIFT);
+
+ if (clock->vco < 2250000) {
+ n_vco |= (2 << SB_N_CB_TUNE_SHIFT);
+ n_vco |= (0 << SB_N_VCO_SEL_SHIFT);
+ } else if (clock->vco < 2750000) {
+ n_vco |= (1 << SB_N_CB_TUNE_SHIFT);
+ n_vco |= (1 << SB_N_VCO_SEL_SHIFT);
+ } else if (clock->vco < 3300000) {
+ n_vco |= (0 << SB_N_CB_TUNE_SHIFT);
+ n_vco |= (2 << SB_N_VCO_SEL_SHIFT);
+ } else {
+ n_vco |= (0 << SB_N_CB_TUNE_SHIFT);
+ n_vco |= (3 << SB_N_VCO_SEL_SHIFT);
+ }
+
+ ret = cdv_sb_write(dev, SB_N_VCO(pipe), n_vco);
+ if (ret)
+ return ret;
+
+ ret = cdv_sb_read(dev, SB_P(pipe), &p);
+ if (ret)
+ return ret;
+ p &= ~(SB_P2_DIVIDER_MASK | SB_P1_DIVIDER_MASK);
+ p |= SET_FIELD(clock->p1, SB_P1_DIVIDER);
+ switch (clock->p2) {
+ case 5:
+ p |= SET_FIELD(SB_P2_5, SB_P2_DIVIDER);
+ break;
+ case 10:
+ p |= SET_FIELD(SB_P2_10, SB_P2_DIVIDER);
+ break;
+ case 14:
+ p |= SET_FIELD(SB_P2_14, SB_P2_DIVIDER);
+ break;
+ case 7:
+ p |= SET_FIELD(SB_P2_7, SB_P2_DIVIDER);
+ break;
+ default:
+ DRM_ERROR("Bad P2 clock: %d\n", clock->p2);
+ return -EINVAL;
+ }
+ ret = cdv_sb_write(dev, SB_P(pipe), p);
+ if (ret)
+ return ret;
+
+ /* always Program the Lane Register for the Pipe A*/
+ if (pipe == 0) {
+ /* Program the Lane0/1 for HDMI B */
+ u32 lane_reg, lane_value;
+
+ lane_reg = PSB_LANE0;
+ cdv_sb_read(dev, lane_reg, &lane_value);
+ lane_value &= ~(LANE_PLL_MASK);
+ lane_value |= LANE_PLL_ENABLE;
+ cdv_sb_write(dev, lane_reg, lane_value);
+
+ lane_reg = PSB_LANE1;
+ cdv_sb_read(dev, lane_reg, &lane_value);
+ lane_value &= ~(LANE_PLL_MASK);
+ lane_value |= LANE_PLL_ENABLE;
+ cdv_sb_write(dev, lane_reg, lane_value);
+
+ /* Program the Lane2/3 for HDMI C */
+ lane_reg = PSB_LANE2;
+ cdv_sb_read(dev, lane_reg, &lane_value);
+ lane_value &= ~(LANE_PLL_MASK);
+ lane_value |= LANE_PLL_ENABLE;
+ cdv_sb_write(dev, lane_reg, lane_value);
+
+ lane_reg = PSB_LANE3;
+ cdv_sb_read(dev, lane_reg, &lane_value);
+ lane_value &= ~(LANE_PLL_MASK);
+ lane_value |= LANE_PLL_ENABLE;
+ cdv_sb_write(dev, lane_reg, lane_value);
+ }
+
+ return 0;
+}
+
+/*
+ * Returns whether any output on the specified pipe is of the specified type
+ */
+bool cdv_intel_pipe_has_type(struct drm_crtc *crtc, int type)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct drm_connector *l_entry;
+
+ list_for_each_entry(l_entry, &mode_config->connector_list, head) {
+ if (l_entry->encoder && l_entry->encoder->crtc == crtc) {
+ struct psb_intel_output *psb_intel_output =
+ to_psb_intel_output(l_entry);
+ if (psb_intel_output->type == type)
+ return true;
+ }
+ }
+ return false;
+}
+
+static const struct cdv_intel_limit_t *cdv_intel_limit(struct drm_crtc *crtc,
+ int refclk)
+{
+ const struct cdv_intel_limit_t *limit;
+ if (cdv_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+ /*
+ * Now only single-channel LVDS is supported on CDV. If it is
+ * incorrect, please add the dual-channel LVDS.
+ */
+ if (refclk == 96000)
+ limit = &cdv_intel_limits[CDV_LIMIT_SINGLE_LVDS_96];
+ else
+ limit = &cdv_intel_limits[CDV_LIMIT_SINGLE_LVDS_100];
+ } else {
+ if (refclk == 27000)
+ limit = &cdv_intel_limits[CDV_LIMIT_DAC_HDMI_27];
+ else
+ limit = &cdv_intel_limits[CDV_LIMIT_DAC_HDMI_96];
+ }
+ return limit;
+}
+
+/* m1 is reserved as 0 in CDV, n is a ring counter */
+static void cdv_intel_clock(struct drm_device *dev,
+ int refclk, struct cdv_intel_clock_t *clock)
+{
+ clock->m = clock->m2 + 2;
+ clock->p = clock->p1 * clock->p2;
+ clock->vco = (refclk * clock->m) / clock->n;
+ clock->dot = clock->vco / clock->p;
+}
+
+
+#define INTELPllInvalid(s) { /* ErrorF (s) */; return false; }
+static bool cdv_intel_PLL_is_valid(struct drm_crtc *crtc,
+ const struct cdv_intel_limit_t *limit,
+ struct cdv_intel_clock_t *clock)
+{
+ if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
+ INTELPllInvalid("p1 out of range\n");
+ if (clock->p < limit->p.min || limit->p.max < clock->p)
+ INTELPllInvalid("p out of range\n");
+ /* unnecessary to check the range of m(m1/M2)/n again */
+ if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
+ INTELPllInvalid("vco out of range\n");
+ /* XXX: We may need to be checking "Dot clock"
+ * depending on the multiplier, connector, etc.,
+ * rather than just a single range.
+ */
+ if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
+ INTELPllInvalid("dot out of range\n");
+
+ return true;
+}
+
+static bool cdv_intel_find_best_PLL(struct drm_crtc *crtc, int target,
+ int refclk,
+ struct cdv_intel_clock_t *best_clock)
+{
+ struct drm_device *dev = crtc->dev;
+ struct cdv_intel_clock_t clock;
+ const struct cdv_intel_limit_t *limit = cdv_intel_limit(crtc, refclk);
+ int err = target;
+
+
+ if (cdv_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+ (REG_READ(LVDS) & LVDS_PORT_EN) != 0) {
+ /*
+ * For LVDS, if the panel is on, just rely on its current
+ * settings for dual-channel. We haven't figured out how to
+ * reliably set up different single/dual channel state, if we
+ * even can.
+ */
+ if ((REG_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
+ LVDS_CLKB_POWER_UP)
+ clock.p2 = limit->p2.p2_fast;
+ else
+ clock.p2 = limit->p2.p2_slow;
+ } else {
+ if (target < limit->p2.dot_limit)
+ clock.p2 = limit->p2.p2_slow;
+ else
+ clock.p2 = limit->p2.p2_fast;
+ }
+
+ memset(best_clock, 0, sizeof(*best_clock));
+ clock.m1 = 0;
+ /* m1 is reserved as 0 in CDV, n is a ring counter.
+ So skip the m1 loop */
+ for (clock.n = limit->n.min; clock.n <= limit->n.max; clock.n++) {
+ for (clock.m2 = limit->m2.min; clock.m2 <= limit->m2.max;
+ clock.m2++) {
+ for (clock.p1 = limit->p1.min;
+ clock.p1 <= limit->p1.max;
+ clock.p1++) {
+ int this_err;
+
+ cdv_intel_clock(dev, refclk, &clock);
+
+ if (!cdv_intel_PLL_is_valid(crtc,
+ limit, &clock))
+ continue;
+
+ this_err = abs(clock.dot - target);
+ if (this_err < err) {
+ *best_clock = clock;
+ err = this_err;
+ }
+ }
+ }
+ }
+
+ return err != target;
+}
+
+int cdv_intel_pipe_set_base(struct drm_crtc *crtc,
+ int x, int y, struct drm_framebuffer *old_fb)
+{
+ struct drm_device *dev = crtc->dev;
+ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+ struct psb_framebuffer *psbfb = to_psb_fb(crtc->fb);
+ int pipe = psb_intel_crtc->pipe;
+ unsigned long start, offset;
+ int dspbase = (pipe == 0 ? DSPABASE : DSPBBASE);
+ int dspsurf = (pipe == 0 ? DSPASURF : DSPBSURF);
+ int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE;
+ int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
+ u32 dspcntr;
+ int ret = 0;
+
+ if (!gma_power_begin(dev, true))
+ return 0;
+
+ /* no fb bound */
+ if (!crtc->fb) {
+ dev_err(dev->dev, "No FB bound\n");
+ goto psb_intel_pipe_cleaner;
+ }
+
+
+ /* We are displaying this buffer, make sure it is actually loaded
+ into the GTT */
+ ret = psb_gtt_pin(psbfb->gtt);
+ if (ret < 0)
+ goto psb_intel_pipe_set_base_exit;
+ start = psbfb->gtt->offset;
+ offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8);
+
+ REG_WRITE(dspstride, crtc->fb->pitch);
+
+ dspcntr = REG_READ(dspcntr_reg);
+ dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
+
+ switch (crtc->fb->bits_per_pixel) {
+ case 8:
+ dspcntr |= DISPPLANE_8BPP;
+ break;
+ case 16:
+ if (crtc->fb->depth == 15)
+ dspcntr |= DISPPLANE_15_16BPP;
+ else
+ dspcntr |= DISPPLANE_16BPP;
+ break;
+ case 24:
+ case 32:
+ dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
+ break;
+ default:
+ dev_err(dev->dev, "Unknown color depth\n");
+ ret = -EINVAL;
+ goto psb_intel_pipe_set_base_exit;
+ }
+ REG_WRITE(dspcntr_reg, dspcntr);
+
+ dev_dbg(dev->dev,
+ "Writing base %08lX %08lX %d %d\n", start, offset, x, y);
+
+ REG_WRITE(dspbase, offset);
+ REG_READ(dspbase);
+ REG_WRITE(dspsurf, start);
+ REG_READ(dspsurf);
+
+psb_intel_pipe_cleaner:
+ /* If there was a previous display we can now unpin it */
+ if (old_fb)
+ psb_gtt_unpin(to_psb_fb(old_fb)->gtt);
+
+psb_intel_pipe_set_base_exit:
+ gma_power_end(dev);
+ return ret;
+}
+
+/**
+ * Sets the power management mode of the pipe and plane.
+ *
+ * This code should probably grow support for turning the cursor off and back
+ * on appropriately at the same time as we're turning the pipe off/on.
+ */
+static void cdv_intel_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+ struct drm_device *dev = crtc->dev;
+ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+ int pipe = psb_intel_crtc->pipe;
+ int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
+ int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
+ int dspbase_reg = (pipe == 0) ? DSPABASE : DSPBBASE;
+ int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
+ u32 temp;
+ bool enabled;
+
+ /* XXX: When our outputs are all unaware of DPMS modes other than off
+ * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
+ */
+ switch (mode) {
+ case DRM_MODE_DPMS_ON:
+ case DRM_MODE_DPMS_STANDBY:
+ case DRM_MODE_DPMS_SUSPEND:
+ /* Enable the DPLL */
+ temp = REG_READ(dpll_reg);
+ if ((temp & DPLL_VCO_ENABLE) == 0) {
+ REG_WRITE(dpll_reg, temp);
+ REG_READ(dpll_reg);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
+ REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
+ REG_READ(dpll_reg);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
+ REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
+ REG_READ(dpll_reg);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
+ }
+
+ /* Jim Bish - switch plan and pipe per scott */
+ /* Enable the plane */
+ temp = REG_READ(dspcntr_reg);
+ if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
+ REG_WRITE(dspcntr_reg,
+ temp | DISPLAY_PLANE_ENABLE);
+ /* Flush the plane changes */
+ REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
+ }
+
+ udelay(150);
+
+ /* Enable the pipe */
+ temp = REG_READ(pipeconf_reg);
+ if ((temp & PIPEACONF_ENABLE) == 0)
+ REG_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE);
+
+ psb_intel_crtc_load_lut(crtc);
+
+ /* Give the overlay scaler a chance to enable
+ * if it's on this pipe */
+ /* psb_intel_crtc_dpms_video(crtc, true); TODO */
+ break;
+ case DRM_MODE_DPMS_OFF:
+ /* Give the overlay scaler a chance to disable
+ * if it's on this pipe */
+ /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */
+
+ /* Disable the VGA plane that we never use */
+ REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
+
+ /* Jim Bish - changed pipe/plane here as well. */
+
+ /* Wait for vblank for the disable to take effect */
+ cdv_intel_wait_for_vblank(dev);
+
+ /* Next, disable display pipes */
+ temp = REG_READ(pipeconf_reg);
+ if ((temp & PIPEACONF_ENABLE) != 0) {
+ REG_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE);
+ REG_READ(pipeconf_reg);
+ }
+
+ /* Wait for vblank for the disable to take effect. */
+ cdv_intel_wait_for_vblank(dev);
+
+ udelay(150);
+
+ /* Disable display plane */
+ temp = REG_READ(dspcntr_reg);
+ if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
+ REG_WRITE(dspcntr_reg,
+ temp & ~DISPLAY_PLANE_ENABLE);
+ /* Flush the plane changes */
+ REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
+ REG_READ(dspbase_reg);
+ }
+
+ temp = REG_READ(dpll_reg);
+ if ((temp & DPLL_VCO_ENABLE) != 0) {
+ REG_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE);
+ REG_READ(dpll_reg);
+ }
+
+ /* Wait for the clocks to turn off. */
+ udelay(150);
+ break;
+ }
+ enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF;
+ /*Set FIFO Watermarks*/
+ REG_WRITE(DSPARB, 0x3F3E);
+}
+
+static void cdv_intel_crtc_prepare(struct drm_crtc *crtc)
+{
+ struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+ crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
+}
+
+static void cdv_intel_crtc_commit(struct drm_crtc *crtc)
+{
+ struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+ crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
+}
+
+void cdv_intel_encoder_prepare(struct drm_encoder *encoder)
+{
+ struct drm_encoder_helper_funcs *encoder_funcs =
+ encoder->helper_private;
+ /* lvds has its own version of prepare see cdv_intel_lvds_prepare */
+ encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
+}
+
+void cdv_intel_encoder_commit(struct drm_encoder *encoder)
+{
+ struct drm_encoder_helper_funcs *encoder_funcs =
+ encoder->helper_private;
+ /* lvds has its own version of commit see cdv_intel_lvds_commit */
+ encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
+}
+
+static bool cdv_intel_crtc_mode_fixup(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ return true;
+}
+
+
+/**
+ * Return the pipe currently connected to the panel fitter,
+ * or -1 if the panel fitter is not present or not in use
+ */
+static int cdv_intel_panel_fitter_pipe(struct drm_device *dev)
+{
+ u32 pfit_control;
+
+ pfit_control = REG_READ(PFIT_CONTROL);
+
+ /* See if the panel fitter is in use */
+ if ((pfit_control & PFIT_ENABLE) == 0)
+ return -1;
+ return (pfit_control >> 29) & 0x3;
+}
+
+static int cdv_intel_crtc_mode_set(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode,
+ int x, int y,
+ struct drm_framebuffer *old_fb)
+{
+ struct drm_device *dev = crtc->dev;
+ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+ int pipe = psb_intel_crtc->pipe;
+ int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
+ int dpll_md_reg = (psb_intel_crtc->pipe == 0) ? DPLL_A_MD : DPLL_B_MD;
+ int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
+ int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
+ int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
+ int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
+ int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
+ int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
+ int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
+ int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
+ int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE;
+ int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS;
+ int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
+ int refclk;
+ struct cdv_intel_clock_t clock;
+ u32 dpll = 0, dspcntr, pipeconf;
+ bool ok, is_sdvo = false, is_dvo = false;
+ bool is_crt = false, is_lvds = false, is_tv = false;
+ bool is_hdmi = false;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct drm_connector *connector;
+
+ list_for_each_entry(connector, &mode_config->connector_list, head) {
+ struct psb_intel_output *psb_intel_output =
+ to_psb_intel_output(connector);
+
+ if (!connector->encoder
+ || connector->encoder->crtc != crtc)
+ continue;
+
+ switch (psb_intel_output->type) {
+ case INTEL_OUTPUT_LVDS:
+ is_lvds = true;
+ break;
+ case INTEL_OUTPUT_SDVO:
+ is_sdvo = true;
+ break;
+ case INTEL_OUTPUT_DVO:
+ is_dvo = true;
+ break;
+ case INTEL_OUTPUT_TVOUT:
+ is_tv = true;
+ break;
+ case INTEL_OUTPUT_ANALOG:
+ is_crt = true;
+ break;
+ case INTEL_OUTPUT_HDMI:
+ is_hdmi = true;
+ break;
+ }
+ }
+
+ refclk = 96000;
+
+ /* Hack selection about ref clk for CRT */
+ /* Select 27MHz as the reference clk for HDMI */
+ if (is_crt || is_hdmi)
+ refclk = 27000;
+
+ drm_mode_debug_printmodeline(adjusted_mode);
+
+ ok = cdv_intel_find_best_PLL(crtc, adjusted_mode->clock, refclk,
+ &clock);
+ if (!ok) {
+ dev_err(dev->dev, "Couldn't find PLL settings for mode!\n");
+ return 0;
+ }
+
+ dpll = DPLL_VGA_MODE_DIS;
+ if (is_tv) {
+ /* XXX: just matching BIOS for now */
+/* dpll |= PLL_REF_INPUT_TVCLKINBC; */
+ dpll |= 3;
+ }
+ dpll |= PLL_REF_INPUT_DREFCLK;
+
+ dpll |= DPLL_SYNCLOCK_ENABLE;
+ dpll |= DPLL_VGA_MODE_DIS;
+ if (is_lvds)
+ dpll |= DPLLB_MODE_LVDS;
+ else
+ dpll |= DPLLB_MODE_DAC_SERIAL;
+ /* dpll |= (2 << 11); */
+
+ /* setup pipeconf */
+ pipeconf = REG_READ(pipeconf_reg);
+
+ /* Set up the display plane register */
+ dspcntr = DISPPLANE_GAMMA_ENABLE;
+
+ if (pipe == 0)
+ dspcntr |= DISPPLANE_SEL_PIPE_A;
+ else
+ dspcntr |= DISPPLANE_SEL_PIPE_B;
+
+ dspcntr |= DISPLAY_PLANE_ENABLE;
+ pipeconf |= PIPEACONF_ENABLE;
+
+ REG_WRITE(dpll_reg, dpll | DPLL_VGA_MODE_DIS | DPLL_SYNCLOCK_ENABLE);
+ REG_READ(dpll_reg);
+
+ cdv_dpll_set_clock_cdv(dev, crtc, &clock);
+
+ udelay(150);
+
+
+ /* The LVDS pin pair needs to be on before the DPLLs are enabled.
+ * This is an exception to the general rule that mode_set doesn't turn
+ * things on.
+ */
+ if (is_lvds) {
+ u32 lvds = REG_READ(LVDS);
+
+ lvds |=
+ LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP |
+ LVDS_PIPEB_SELECT;
+ /* Set the B0-B3 data pairs corresponding to
+ * whether we're going to
+ * set the DPLLs for dual-channel mode or not.
+ */
+ if (clock.p2 == 7)
+ lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
+ else
+ lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
+
+ /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
+ * appropriately here, but we need to look more
+ * thoroughly into how panels behave in the two modes.
+ */
+
+ REG_WRITE(LVDS, lvds);
+ REG_READ(LVDS);
+ }
+
+ dpll |= DPLL_VCO_ENABLE;
+
+ /* Disable the panel fitter if it was on our pipe */
+ if (cdv_intel_panel_fitter_pipe(dev) == pipe)
+ REG_WRITE(PFIT_CONTROL, 0);
+
+ DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
+ drm_mode_debug_printmodeline(mode);
+
+ REG_WRITE(dpll_reg,
+ (REG_READ(dpll_reg) & ~DPLL_LOCK) | DPLL_VCO_ENABLE);
+ REG_READ(dpll_reg);
+ /* Wait for the clocks to stabilize. */
+ udelay(150); /* 42 usec w/o calibration, 110 with. rounded up. */
+
+ if (!(REG_READ(dpll_reg) & DPLL_LOCK)) {
+ dev_err(dev->dev, "Failed to get DPLL lock\n");
+ return -EBUSY;
+ }
+
+ {
+ int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
+ REG_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) | ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT));
+ }
+
+ REG_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) |
+ ((adjusted_mode->crtc_htotal - 1) << 16));
+ REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) |
+ ((adjusted_mode->crtc_hblank_end - 1) << 16));
+ REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) |
+ ((adjusted_mode->crtc_hsync_end - 1) << 16));
+ REG_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) |
+ ((adjusted_mode->crtc_vtotal - 1) << 16));
+ REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) |
+ ((adjusted_mode->crtc_vblank_end - 1) << 16));
+ REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) |
+ ((adjusted_mode->crtc_vsync_end - 1) << 16));
+ /* pipesrc and dspsize control the size that is scaled from,
+ * which should always be the user's requested size.
+ */
+ REG_WRITE(dspsize_reg,
+ ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1));
+ REG_WRITE(dsppos_reg, 0);
+ REG_WRITE(pipesrc_reg,
+ ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
+ REG_WRITE(pipeconf_reg, pipeconf);
+ REG_READ(pipeconf_reg);
+
+ cdv_intel_wait_for_vblank(dev);
+
+ REG_WRITE(dspcntr_reg, dspcntr);
+
+ /* Flush the plane changes */
+ {
+ struct drm_crtc_helper_funcs *crtc_funcs =
+ crtc->helper_private;
+ crtc_funcs->mode_set_base(crtc, x, y, old_fb);
+ }
+
+ cdv_intel_wait_for_vblank(dev);
+
+ return 0;
+}
+
+/** Loads the palette/gamma unit for the CRTC with the prepared values */
+void cdv_intel_crtc_load_lut(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_psb_private *dev_priv =
+ (struct drm_psb_private *)dev->dev_private;
+ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+ int palreg = PALETTE_A;
+ int i;
+
+ /* The clocks have to be on to load the palette. */
+ if (!crtc->enabled)
+ return;
+
+ switch (psb_intel_crtc->pipe) {
+ case 0:
+ break;
+ case 1:
+ palreg = PALETTE_B;
+ break;
+ case 2:
+ palreg = PALETTE_C;
+ break;
+ default:
+ dev_err(dev->dev, "Illegal Pipe Number.\n");
+ return;
+ }
+
+ if (gma_power_begin(dev, false)) {
+ for (i = 0; i < 256; i++) {
+ REG_WRITE(palreg + 4 * i,
+ ((psb_intel_crtc->lut_r[i] +
+ psb_intel_crtc->lut_adj[i]) << 16) |
+ ((psb_intel_crtc->lut_g[i] +
+ psb_intel_crtc->lut_adj[i]) << 8) |
+ (psb_intel_crtc->lut_b[i] +
+ psb_intel_crtc->lut_adj[i]));
+ }
+ gma_power_end(dev);
+ } else {
+ for (i = 0; i < 256; i++) {
+ dev_priv->save_palette_a[i] =
+ ((psb_intel_crtc->lut_r[i] +
+ psb_intel_crtc->lut_adj[i]) << 16) |
+ ((psb_intel_crtc->lut_g[i] +
+ psb_intel_crtc->lut_adj[i]) << 8) |
+ (psb_intel_crtc->lut_b[i] +
+ psb_intel_crtc->lut_adj[i]);
+ }
+
+ }
+}
+
+/**
+ * Save HW states of giving crtc
+ */
+static void cdv_intel_crtc_save(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ /* struct drm_psb_private *dev_priv =
+ (struct drm_psb_private *)dev->dev_private; */
+ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+ struct psb_intel_crtc_state *crtc_state = psb_intel_crtc->crtc_state;
+ int pipeA = (psb_intel_crtc->pipe == 0);
+ uint32_t paletteReg;
+ int i;
+
+ if (!crtc_state) {
+ dev_dbg(dev->dev, "No CRTC state found\n");
+ return;
+ }
+
+ crtc_state->saveDSPCNTR = REG_READ(pipeA ? DSPACNTR : DSPBCNTR);
+ crtc_state->savePIPECONF = REG_READ(pipeA ? PIPEACONF : PIPEBCONF);
+ crtc_state->savePIPESRC = REG_READ(pipeA ? PIPEASRC : PIPEBSRC);
+ crtc_state->saveFP0 = REG_READ(pipeA ? FPA0 : FPB0);
+ crtc_state->saveFP1 = REG_READ(pipeA ? FPA1 : FPB1);
+ crtc_state->saveDPLL = REG_READ(pipeA ? DPLL_A : DPLL_B);
+ crtc_state->saveHTOTAL = REG_READ(pipeA ? HTOTAL_A : HTOTAL_B);
+ crtc_state->saveHBLANK = REG_READ(pipeA ? HBLANK_A : HBLANK_B);
+ crtc_state->saveHSYNC = REG_READ(pipeA ? HSYNC_A : HSYNC_B);
+ crtc_state->saveVTOTAL = REG_READ(pipeA ? VTOTAL_A : VTOTAL_B);
+ crtc_state->saveVBLANK = REG_READ(pipeA ? VBLANK_A : VBLANK_B);
+ crtc_state->saveVSYNC = REG_READ(pipeA ? VSYNC_A : VSYNC_B);
+ crtc_state->saveDSPSTRIDE = REG_READ(pipeA ? DSPASTRIDE : DSPBSTRIDE);
+
+ /*NOTE: DSPSIZE DSPPOS only for psb*/
+ crtc_state->saveDSPSIZE = REG_READ(pipeA ? DSPASIZE : DSPBSIZE);
+ crtc_state->saveDSPPOS = REG_READ(pipeA ? DSPAPOS : DSPBPOS);
+
+ crtc_state->saveDSPBASE = REG_READ(pipeA ? DSPABASE : DSPBBASE);
+
+ DRM_DEBUG("(%x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x)\n",
+ crtc_state->saveDSPCNTR,
+ crtc_state->savePIPECONF,
+ crtc_state->savePIPESRC,
+ crtc_state->saveFP0,
+ crtc_state->saveFP1,
+ crtc_state->saveDPLL,
+ crtc_state->saveHTOTAL,
+ crtc_state->saveHBLANK,
+ crtc_state->saveHSYNC,
+ crtc_state->saveVTOTAL,
+ crtc_state->saveVBLANK,
+ crtc_state->saveVSYNC,
+ crtc_state->saveDSPSTRIDE,
+ crtc_state->saveDSPSIZE,
+ crtc_state->saveDSPPOS,
+ crtc_state->saveDSPBASE
+ );
+
+ paletteReg = pipeA ? PALETTE_A : PALETTE_B;
+ for (i = 0; i < 256; ++i)
+ crtc_state->savePalette[i] = REG_READ(paletteReg + (i << 2));
+}
+
+/**
+ * Restore HW states of giving crtc
+ */
+static void cdv_intel_crtc_restore(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ /* struct drm_psb_private * dev_priv =
+ (struct drm_psb_private *)dev->dev_private; */
+ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+ struct psb_intel_crtc_state *crtc_state = psb_intel_crtc->crtc_state;
+ /* struct drm_crtc_helper_funcs * crtc_funcs = crtc->helper_private; */
+ int pipeA = (psb_intel_crtc->pipe == 0);
+ uint32_t paletteReg;
+ int i;
+
+ if (!crtc_state) {
+ dev_dbg(dev->dev, "No crtc state\n");
+ return;
+ }
+
+ DRM_DEBUG(
+ "current:(%x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x)\n",
+ REG_READ(pipeA ? DSPACNTR : DSPBCNTR),
+ REG_READ(pipeA ? PIPEACONF : PIPEBCONF),
+ REG_READ(pipeA ? PIPEASRC : PIPEBSRC),
+ REG_READ(pipeA ? FPA0 : FPB0),
+ REG_READ(pipeA ? FPA1 : FPB1),
+ REG_READ(pipeA ? DPLL_A : DPLL_B),
+ REG_READ(pipeA ? HTOTAL_A : HTOTAL_B),
+ REG_READ(pipeA ? HBLANK_A : HBLANK_B),
+ REG_READ(pipeA ? HSYNC_A : HSYNC_B),
+ REG_READ(pipeA ? VTOTAL_A : VTOTAL_B),
+ REG_READ(pipeA ? VBLANK_A : VBLANK_B),
+ REG_READ(pipeA ? VSYNC_A : VSYNC_B),
+ REG_READ(pipeA ? DSPASTRIDE : DSPBSTRIDE),
+ REG_READ(pipeA ? DSPASIZE : DSPBSIZE),
+ REG_READ(pipeA ? DSPAPOS : DSPBPOS),
+ REG_READ(pipeA ? DSPABASE : DSPBBASE)
+ );
+
+ DRM_DEBUG(
+ "saved: (%x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x)\n",
+ crtc_state->saveDSPCNTR,
+ crtc_state->savePIPECONF,
+ crtc_state->savePIPESRC,
+ crtc_state->saveFP0,
+ crtc_state->saveFP1,
+ crtc_state->saveDPLL,
+ crtc_state->saveHTOTAL,
+ crtc_state->saveHBLANK,
+ crtc_state->saveHSYNC,
+ crtc_state->saveVTOTAL,
+ crtc_state->saveVBLANK,
+ crtc_state->saveVSYNC,
+ crtc_state->saveDSPSTRIDE,
+ crtc_state->saveDSPSIZE,
+ crtc_state->saveDSPPOS,
+ crtc_state->saveDSPBASE
+ );
+
+
+ if (crtc_state->saveDPLL & DPLL_VCO_ENABLE) {
+ REG_WRITE(pipeA ? DPLL_A : DPLL_B,
+ crtc_state->saveDPLL & ~DPLL_VCO_ENABLE);
+ REG_READ(pipeA ? DPLL_A : DPLL_B);
+ DRM_DEBUG("write dpll: %x\n",
+ REG_READ(pipeA ? DPLL_A : DPLL_B));
+ udelay(150);
+ }
+
+ REG_WRITE(pipeA ? FPA0 : FPB0, crtc_state->saveFP0);
+ REG_READ(pipeA ? FPA0 : FPB0);
+
+ REG_WRITE(pipeA ? FPA1 : FPB1, crtc_state->saveFP1);
+ REG_READ(pipeA ? FPA1 : FPB1);
+
+ REG_WRITE(pipeA ? DPLL_A : DPLL_B, crtc_state->saveDPLL);
+ REG_READ(pipeA ? DPLL_A : DPLL_B);
+ udelay(150);
+
+ REG_WRITE(pipeA ? HTOTAL_A : HTOTAL_B, crtc_state->saveHTOTAL);
+ REG_WRITE(pipeA ? HBLANK_A : HBLANK_B, crtc_state->saveHBLANK);
+ REG_WRITE(pipeA ? HSYNC_A : HSYNC_B, crtc_state->saveHSYNC);
+ REG_WRITE(pipeA ? VTOTAL_A : VTOTAL_B, crtc_state->saveVTOTAL);
+ REG_WRITE(pipeA ? VBLANK_A : VBLANK_B, crtc_state->saveVBLANK);
+ REG_WRITE(pipeA ? VSYNC_A : VSYNC_B, crtc_state->saveVSYNC);
+ REG_WRITE(pipeA ? DSPASTRIDE : DSPBSTRIDE, crtc_state->saveDSPSTRIDE);
+
+ REG_WRITE(pipeA ? DSPASIZE : DSPBSIZE, crtc_state->saveDSPSIZE);
+ REG_WRITE(pipeA ? DSPAPOS : DSPBPOS, crtc_state->saveDSPPOS);
+
+ REG_WRITE(pipeA ? PIPEASRC : PIPEBSRC, crtc_state->savePIPESRC);
+ REG_WRITE(pipeA ? DSPABASE : DSPBBASE, crtc_state->saveDSPBASE);
+ REG_WRITE(pipeA ? PIPEACONF : PIPEBCONF, crtc_state->savePIPECONF);
+
+ cdv_intel_wait_for_vblank(dev);
+
+ REG_WRITE(pipeA ? DSPACNTR : DSPBCNTR, crtc_state->saveDSPCNTR);
+ REG_WRITE(pipeA ? DSPABASE : DSPBBASE, crtc_state->saveDSPBASE);
+
+ cdv_intel_wait_for_vblank(dev);
+
+ paletteReg = pipeA ? PALETTE_A : PALETTE_B;
+ for (i = 0; i < 256; ++i)
+ REG_WRITE(paletteReg + (i << 2), crtc_state->savePalette[i]);
+}
+
+static int cdv_intel_crtc_cursor_set(struct drm_crtc *crtc,
+ struct drm_file *file_priv,
+ uint32_t handle,
+ uint32_t width, uint32_t height)
+{
+ struct drm_device *dev = crtc->dev;
+ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+ int pipe = psb_intel_crtc->pipe;
+ uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR;
+ uint32_t base = (pipe == 0) ? CURABASE : CURBBASE;
+ uint32_t temp;
+ size_t addr = 0;
+ struct gtt_range *gt;
+ struct drm_gem_object *obj;
+ int ret;
+
+ /* if we want to turn of the cursor ignore width and height */
+ if (!handle) {
+ /* turn off the cursor */
+ temp = CURSOR_MODE_DISABLE;
+
+ if (gma_power_begin(dev, false)) {
+ REG_WRITE(control, temp);
+ REG_WRITE(base, 0);
+ gma_power_end(dev);
+ }
+
+ /* unpin the old GEM object */
+ if (psb_intel_crtc->cursor_obj) {
+ gt = container_of(psb_intel_crtc->cursor_obj,
+ struct gtt_range, gem);
+ psb_gtt_unpin(gt);
+ drm_gem_object_unreference(psb_intel_crtc->cursor_obj);
+ psb_intel_crtc->cursor_obj = NULL;
+ }
+
+ return 0;
+ }
+
+ /* Currently we only support 64x64 cursors */
+ if (width != 64 || height != 64) {
+ dev_dbg(dev->dev, "we currently only support 64x64 cursors\n");
+ return -EINVAL;
+ }
+
+ obj = drm_gem_object_lookup(dev, file_priv, handle);
+ if (!obj)
+ return -ENOENT;
+
+ if (obj->size < width * height * 4) {
+ dev_dbg(dev->dev, "buffer is to small\n");
+ return -ENOMEM;
+ }
+
+ gt = container_of(obj, struct gtt_range, gem);
+
+ /* Pin the memory into the GTT */
+ ret = psb_gtt_pin(gt);
+ if (ret) {
+ dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle);
+ return ret;
+ }
+
+ addr = gt->offset; /* Or resource.start ??? */
+
+ psb_intel_crtc->cursor_addr = addr;
+
+ temp = 0;
+ /* set the pipe for the cursor */
+ temp |= (pipe << 28);
+ temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
+
+ if (gma_power_begin(dev, false)) {
+ REG_WRITE(control, temp);
+ REG_WRITE(base, addr);
+ gma_power_end(dev);
+ }
+
+ /* unpin the old GEM object */
+ if (psb_intel_crtc->cursor_obj) {
+ gt = container_of(psb_intel_crtc->cursor_obj,
+ struct gtt_range, gem);
+ psb_gtt_unpin(gt);
+ drm_gem_object_unreference(psb_intel_crtc->cursor_obj);
+ psb_intel_crtc->cursor_obj = obj;
+ }
+ return 0;
+}
+
+static int cdv_intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
+{
+ struct drm_device *dev = crtc->dev;
+ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+ int pipe = psb_intel_crtc->pipe;
+ uint32_t temp = 0;
+ uint32_t adder;
+
+
+ if (x < 0) {
+ temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT);
+ x = -x;
+ }
+ if (y < 0) {
+ temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT);
+ y = -y;
+ }
+
+ temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT);
+ temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT);
+
+ adder = psb_intel_crtc->cursor_addr;
+
+ if (gma_power_begin(dev, false)) {
+ REG_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp);
+ REG_WRITE((pipe == 0) ? CURABASE : CURBBASE, adder);
+ gma_power_end(dev);
+ }
+ return 0;
+}
+
+static void cdv_intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red,
+ u16 *green, u16 *blue, uint32_t start, uint32_t size)
+{
+ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+ int i;
+ int end = (start + size > 256) ? 256 : start + size;
+
+ for (i = start; i < end; i++) {
+ psb_intel_crtc->lut_r[i] = red[i] >> 8;
+ psb_intel_crtc->lut_g[i] = green[i] >> 8;
+ psb_intel_crtc->lut_b[i] = blue[i] >> 8;
+ }
+
+ cdv_intel_crtc_load_lut(crtc);
+}
+
+static int cdv_crtc_set_config(struct drm_mode_set *set)
+{
+ int ret = 0;
+ struct drm_device *dev = set->crtc->dev;
+ struct drm_psb_private *dev_priv = dev->dev_private;
+
+ if (!dev_priv->rpm_enabled)
+ return drm_crtc_helper_set_config(set);
+
+ pm_runtime_forbid(&dev->pdev->dev);
+
+ ret = drm_crtc_helper_set_config(set);
+
+ pm_runtime_allow(&dev->pdev->dev);
+
+ return ret;
+}
+
+/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */
+
+/* FIXME: why are we using this, should it be cdv_ in this tree ? */
+
+static void i8xx_clock(int refclk, struct cdv_intel_clock_t *clock)
+{
+ clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
+ clock->p = clock->p1 * clock->p2;
+ clock->vco = refclk * clock->m / (clock->n + 2);
+ clock->dot = clock->vco / clock->p;
+}
+
+/* Returns the clock of the currently programmed mode of the given pipe. */
+static int cdv_intel_crtc_clock_get(struct drm_device *dev,
+ struct drm_crtc *crtc)
+{
+ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+ int pipe = psb_intel_crtc->pipe;
+ u32 dpll;
+ u32 fp;
+ struct cdv_intel_clock_t clock;
+ bool is_lvds;
+ struct drm_psb_private *dev_priv = dev->dev_private;
+
+ if (gma_power_begin(dev, false)) {
+ dpll = REG_READ((pipe == 0) ? DPLL_A : DPLL_B);
+ if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
+ fp = REG_READ((pipe == 0) ? FPA0 : FPB0);
+ else
+ fp = REG_READ((pipe == 0) ? FPA1 : FPB1);
+ is_lvds = (pipe == 1) && (REG_READ(LVDS) & LVDS_PORT_EN);
+ gma_power_end(dev);
+ } else {
+ dpll = (pipe == 0) ?
+ dev_priv->saveDPLL_A : dev_priv->saveDPLL_B;
+
+ if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
+ fp = (pipe == 0) ?
+ dev_priv->saveFPA0 :
+ dev_priv->saveFPB0;
+ else
+ fp = (pipe == 0) ?
+ dev_priv->saveFPA1 :
+ dev_priv->saveFPB1;
+
+ is_lvds = (pipe == 1) && (dev_priv->saveLVDS & LVDS_PORT_EN);
+ }
+
+ clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
+ clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
+ clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
+
+ if (is_lvds) {
+ clock.p1 =
+ ffs((dpll &
+ DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
+ DPLL_FPA01_P1_POST_DIV_SHIFT);
+ if (clock.p1 == 0) {
+ clock.p1 = 4;
+ dev_err(dev->dev, "PLL %d\n", dpll);
+ }
+ clock.p2 = 14;
+
+ if ((dpll & PLL_REF_INPUT_MASK) ==
+ PLLB_REF_INPUT_SPREADSPECTRUMIN) {
+ /* XXX: might not be 66MHz */
+ i8xx_clock(66000, &clock);
+ } else
+ i8xx_clock(48000, &clock);
+ } else {
+ if (dpll & PLL_P1_DIVIDE_BY_TWO)
+ clock.p1 = 2;
+ else {
+ clock.p1 =
+ ((dpll &
+ DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
+ DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
+ }
+ if (dpll & PLL_P2_DIVIDE_BY_4)
+ clock.p2 = 4;
+ else
+ clock.p2 = 2;
+
+ i8xx_clock(48000, &clock);
+ }
+
+ /* XXX: It would be nice to validate the clocks, but we can't reuse
+ * i830PllIsValid() because it relies on the xf86_config connector
+ * configuration being accurate, which it isn't necessarily.
+ */
+
+ return clock.dot;
+}
+
+/** Returns the currently programmed mode of the given pipe. */
+struct drm_display_mode *cdv_intel_crtc_mode_get(struct drm_device *dev,
+ struct drm_crtc *crtc)
+{
+ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+ int pipe = psb_intel_crtc->pipe;
+ struct drm_display_mode *mode;
+ int htot;
+ int hsync;
+ int vtot;
+ int vsync;
+ struct drm_psb_private *dev_priv = dev->dev_private;
+
+ if (gma_power_begin(dev, false)) {
+ htot = REG_READ((pipe == 0) ? HTOTAL_A : HTOTAL_B);
+ hsync = REG_READ((pipe == 0) ? HSYNC_A : HSYNC_B);
+ vtot = REG_READ((pipe == 0) ? VTOTAL_A : VTOTAL_B);
+ vsync = REG_READ((pipe == 0) ? VSYNC_A : VSYNC_B);
+ gma_power_end(dev);
+ } else {
+ htot = (pipe == 0) ?
+ dev_priv->saveHTOTAL_A : dev_priv->saveHTOTAL_B;
+ hsync = (pipe == 0) ?
+ dev_priv->saveHSYNC_A : dev_priv->saveHSYNC_B;
+ vtot = (pipe == 0) ?
+ dev_priv->saveVTOTAL_A : dev_priv->saveVTOTAL_B;
+ vsync = (pipe == 0) ?
+ dev_priv->saveVSYNC_A : dev_priv->saveVSYNC_B;
+ }
+
+ mode = kzalloc(sizeof(*mode), GFP_KERNEL);
+ if (!mode)
+ return NULL;
+
+ mode->clock = cdv_intel_crtc_clock_get(dev, crtc);
+ mode->hdisplay = (htot & 0xffff) + 1;
+ mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
+ mode->hsync_start = (hsync & 0xffff) + 1;
+ mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
+ mode->vdisplay = (vtot & 0xffff) + 1;
+ mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
+ mode->vsync_start = (vsync & 0xffff) + 1;
+ mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
+
+ drm_mode_set_name(mode);
+ drm_mode_set_crtcinfo(mode, 0);
+
+ return mode;
+}
+
+static void cdv_intel_crtc_destroy(struct drm_crtc *crtc)
+{
+ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+
+ kfree(psb_intel_crtc->crtc_state);
+ drm_crtc_cleanup(crtc);
+ kfree(psb_intel_crtc);
+}
+
+const struct drm_crtc_helper_funcs cdv_intel_helper_funcs = {
+ .dpms = cdv_intel_crtc_dpms,
+ .mode_fixup = cdv_intel_crtc_mode_fixup,
+ .mode_set = cdv_intel_crtc_mode_set,
+ .mode_set_base = cdv_intel_pipe_set_base,
+ .prepare = cdv_intel_crtc_prepare,
+ .commit = cdv_intel_crtc_commit,
+};
+
+const struct drm_crtc_funcs cdv_intel_crtc_funcs = {
+ .save = cdv_intel_crtc_save,
+ .restore = cdv_intel_crtc_restore,
+ .cursor_set = cdv_intel_crtc_cursor_set,
+ .cursor_move = cdv_intel_crtc_cursor_move,
+ .gamma_set = cdv_intel_crtc_gamma_set,
+ .set_config = cdv_crtc_set_config,
+ .destroy = cdv_intel_crtc_destroy,
+};
+
+/*
+ * Set the default value of cursor control and base register
+ * to zero. This is a workaround for h/w defect on oaktrail
+ */
+void cdv_intel_cursor_init(struct drm_device *dev, int pipe)
+{
+ uint32_t control;
+ uint32_t base;
+
+ switch (pipe) {
+ case 0:
+ control = CURACNTR;
+ base = CURABASE;
+ break;
+ case 1:
+ control = CURBCNTR;
+ base = CURBBASE;
+ break;
+ case 2:
+ control = CURCCNTR;
+ base = CURCBASE;
+ break;
+ default:
+ return;
+ }
+
+ REG_WRITE(control, 0);
+ REG_WRITE(base, 0);
+}
+
diff --git a/drivers/gpu/drm/gma500/cdv_intel_hdmi.c b/drivers/gpu/drm/gma500/cdv_intel_hdmi.c
new file mode 100644
index 0000000..cbca2b0
--- /dev/null
+++ b/drivers/gpu/drm/gma500/cdv_intel_hdmi.c
@@ -0,0 +1,376 @@
+/*
+ * Copyright © 2006-2011 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ * jim liu <jim.liu at intel.com>
+ *
+ * FIXME:
+ * We should probably make this generic and share it with Medfield
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_edid.h>
+#include "psb_intel_drv.h"
+#include "psb_drv.h"
+#include "psb_intel_reg.h"
+#include <linux/pm_runtime.h>
+
+/* hdmi control bits */
+#define HDMI_NULL_PACKETS_DURING_VSYNC (1 << 9)
+#define HDMI_BORDER_ENABLE (1 << 7)
+#define HDMI_AUDIO_ENABLE (1 << 6)
+#define HDMI_VSYNC_ACTIVE_HIGH (1 << 4)
+#define HDMI_HSYNC_ACTIVE_HIGH (1 << 3)
+/* hdmi-b control bits */
+#define HDMIB_PIPE_B_SELECT (1 << 30)
+
+
+struct mid_intel_hdmi_priv {
+ u32 hdmi_reg;
+ u32 save_HDMIB;
+ bool has_hdmi_sink;
+ bool has_hdmi_audio;
+ /* Should set this when detect hotplug */
+ bool hdmi_device_connected;
+ struct mdfld_hdmi_i2c *i2c_bus;
+ struct i2c_adapter *hdmi_i2c_adapter; /* for control functions */
+ struct drm_device *dev;
+};
+
+static void cdv_hdmi_mode_set(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct drm_device *dev = encoder->dev;
+ struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+ struct mid_intel_hdmi_priv *hdmi_priv = output->dev_priv;
+ u32 hdmib;
+ struct drm_crtc *crtc = encoder->crtc;
+ struct psb_intel_crtc *intel_crtc = to_psb_intel_crtc(crtc);
+
+ hdmib = (2 << 10);
+
+ if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+ hdmib |= HDMI_VSYNC_ACTIVE_HIGH;
+ if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+ hdmib |= HDMI_HSYNC_ACTIVE_HIGH;
+
+ if (intel_crtc->pipe == 1)
+ hdmib |= HDMIB_PIPE_B_SELECT;
+
+ if (hdmi_priv->has_hdmi_audio) {
+ hdmib |= HDMI_AUDIO_ENABLE;
+ hdmib |= HDMI_NULL_PACKETS_DURING_VSYNC;
+ }
+
+ REG_WRITE(hdmi_priv->hdmi_reg, hdmib);
+ REG_READ(hdmi_priv->hdmi_reg);
+}
+
+static bool cdv_hdmi_mode_fixup(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ return true;
+}
+
+static void cdv_hdmi_dpms(struct drm_encoder *encoder, int mode)
+{
+ struct drm_device *dev = encoder->dev;
+ struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+ struct mid_intel_hdmi_priv *hdmi_priv = output->dev_priv;
+ u32 hdmib;
+
+ hdmib = REG_READ(hdmi_priv->hdmi_reg);
+
+ if (mode != DRM_MODE_DPMS_ON)
+ REG_WRITE(hdmi_priv->hdmi_reg, hdmib & ~HDMIB_PORT_EN);
+ else
+ REG_WRITE(hdmi_priv->hdmi_reg, hdmib | HDMIB_PORT_EN);
+ REG_READ(hdmi_priv->hdmi_reg);
+}
+
+static void cdv_hdmi_save(struct drm_connector *connector)
+{
+ struct drm_device *dev = connector->dev;
+ struct psb_intel_output *output = to_psb_intel_output(connector);
+ struct mid_intel_hdmi_priv *hdmi_priv = output->dev_priv;
+
+ hdmi_priv->save_HDMIB = REG_READ(hdmi_priv->hdmi_reg);
+}
+
+static void cdv_hdmi_restore(struct drm_connector *connector)
+{
+ struct drm_device *dev = connector->dev;
+ struct psb_intel_output *output = to_psb_intel_output(connector);
+ struct mid_intel_hdmi_priv *hdmi_priv = output->dev_priv;
+
+ REG_WRITE(hdmi_priv->hdmi_reg, hdmi_priv->save_HDMIB);
+ REG_READ(hdmi_priv->hdmi_reg);
+}
+
+static enum drm_connector_status cdv_hdmi_detect(
+ struct drm_connector *connector, bool force)
+{
+ struct psb_intel_output *psb_intel_output =
+ to_psb_intel_output(connector);
+ struct mid_intel_hdmi_priv *hdmi_priv = psb_intel_output->dev_priv;
+ struct edid *edid = NULL;
+ enum drm_connector_status status = connector_status_disconnected;
+
+ edid = drm_get_edid(&psb_intel_output->base,
+ psb_intel_output->hdmi_i2c_adapter);
+
+ hdmi_priv->has_hdmi_sink = false;
+ hdmi_priv->has_hdmi_audio = false;
+ if (edid) {
+ if (edid->input & DRM_EDID_INPUT_DIGITAL) {
+ status = connector_status_connected;
+ hdmi_priv->has_hdmi_sink =
+ drm_detect_hdmi_monitor(edid);
+ hdmi_priv->has_hdmi_audio =
+ drm_detect_monitor_audio(edid);
+ }
+
+ psb_intel_output->base.display_info.raw_edid = NULL;
+ kfree(edid);
+ }
+ return status;
+}
+
+static int cdv_hdmi_set_property(struct drm_connector *connector,
+ struct drm_property *property,
+ uint64_t value)
+{
+ struct drm_encoder *encoder = connector->encoder;
+
+ if (!strcmp(property->name, "scaling mode") && encoder) {
+ struct psb_intel_crtc *crtc = to_psb_intel_crtc(encoder->crtc);
+ bool centre;
+ uint64_t curValue;
+
+ if (!crtc)
+ return -1;
+
+ switch (value) {
+ case DRM_MODE_SCALE_FULLSCREEN:
+ break;
+ case DRM_MODE_SCALE_NO_SCALE:
+ break;
+ case DRM_MODE_SCALE_ASPECT:
+ break;
+ default:
+ return -1;
+ }
+
+ if (drm_connector_property_get_value(connector,
+ property, &curValue))
+ return -1;
+
+ if (curValue == value)
+ return 0;
+
+ if (drm_connector_property_set_value(connector,
+ property, value))
+ return -1;
+
+ centre = (curValue == DRM_MODE_SCALE_NO_SCALE) ||
+ (value == DRM_MODE_SCALE_NO_SCALE);
+
+ if (crtc->saved_mode.hdisplay != 0 &&
+ crtc->saved_mode.vdisplay != 0) {
+ if (centre) {
+ if (!drm_crtc_helper_set_mode(encoder->crtc, &crtc->saved_mode,
+ encoder->crtc->x, encoder->crtc->y, encoder->crtc->fb))
+ return -1;
+ } else {
+ struct drm_encoder_helper_funcs *helpers
+ = encoder->helper_private;
+ helpers->mode_set(encoder, &crtc->saved_mode,
+ &crtc->saved_adjusted_mode);
+ }
+ }
+ }
+ return 0;
+}
+
+/*
+ * Return the list of HDMI DDC modes if available.
+ */
+static int cdv_hdmi_get_modes(struct drm_connector *connector)
+{
+ struct psb_intel_output *psb_intel_output =
+ to_psb_intel_output(connector);
+ struct edid *edid = NULL;
+ int ret = 0;
+
+ edid = drm_get_edid(&psb_intel_output->base,
+ psb_intel_output->hdmi_i2c_adapter);
+ if (edid) {
+ drm_mode_connector_update_edid_property(&psb_intel_output->
+ base, edid);
+ ret = drm_add_edid_modes(&psb_intel_output->base, edid);
+ kfree(edid);
+ }
+ return ret;
+}
+
+static int cdv_hdmi_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+
+ if (mode->clock > 165000)
+ return MODE_CLOCK_HIGH;
+ if (mode->clock < 20000)
+ return MODE_CLOCK_HIGH;
+
+ /* just in case */
+ if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+ return MODE_NO_DBLESCAN;
+
+ /* just in case */
+ if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+ return MODE_NO_INTERLACE;
+
+ /*
+ * FIXME: for now we limit the size to 1680x1050 on CDV, otherwise it
+ * will go beyond the stolen memory size allocated to the framebuffer
+ */
+ if (mode->hdisplay > 1680)
+ return MODE_PANEL;
+ if (mode->vdisplay > 1050)
+ return MODE_PANEL;
+ return MODE_OK;
+}
+
+static void cdv_hdmi_destroy(struct drm_connector *connector)
+{
+ struct psb_intel_output *psb_intel_output =
+ to_psb_intel_output(connector);
+
+ if (psb_intel_output->ddc_bus)
+ psb_intel_i2c_destroy(psb_intel_output->ddc_bus);
+ drm_sysfs_connector_remove(connector);
+ drm_connector_cleanup(connector);
+ kfree(connector);
+}
+
+static const struct drm_encoder_helper_funcs cdv_hdmi_helper_funcs = {
+ .dpms = cdv_hdmi_dpms,
+ .mode_fixup = cdv_hdmi_mode_fixup,
+ .prepare = psb_intel_encoder_prepare,
+ .mode_set = cdv_hdmi_mode_set,
+ .commit = psb_intel_encoder_commit,
+};
+
+static const struct drm_connector_helper_funcs
+ cdv_hdmi_connector_helper_funcs = {
+ .get_modes = cdv_hdmi_get_modes,
+ .mode_valid = cdv_hdmi_mode_valid,
+ .best_encoder = psb_intel_best_encoder,
+};
+
+static const struct drm_connector_funcs cdv_hdmi_connector_funcs = {
+ .dpms = drm_helper_connector_dpms,
+ .save = cdv_hdmi_save,
+ .restore = cdv_hdmi_restore,
+ .detect = cdv_hdmi_detect,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .set_property = cdv_hdmi_set_property,
+ .destroy = cdv_hdmi_destroy,
+};
+
+void cdv_hdmi_init(struct drm_device *dev,
+ struct psb_intel_mode_device *mode_dev, int reg)
+{
+ struct psb_intel_output *psb_intel_output;
+ struct drm_connector *connector;
+ struct drm_encoder *encoder;
+ struct mid_intel_hdmi_priv *hdmi_priv;
+ int ddc_bus;
+
+ psb_intel_output = kzalloc(sizeof(struct psb_intel_output) +
+ sizeof(struct mid_intel_hdmi_priv), GFP_KERNEL);
+ if (!psb_intel_output)
+ return;
+
+ hdmi_priv = (struct mid_intel_hdmi_priv *)(psb_intel_output + 1);
+ psb_intel_output->mode_dev = mode_dev;
+ connector = &psb_intel_output->base;
+ encoder = &psb_intel_output->enc;
+ drm_connector_init(dev, &psb_intel_output->base,
+ &cdv_hdmi_connector_funcs,
+ DRM_MODE_CONNECTOR_DVID);
+
+ drm_encoder_init(dev, &psb_intel_output->enc, &psb_intel_lvds_enc_funcs,
+ DRM_MODE_ENCODER_TMDS);
+
+ drm_mode_connector_attach_encoder(&psb_intel_output->base,
+ &psb_intel_output->enc);
+ psb_intel_output->type = INTEL_OUTPUT_HDMI;
+ hdmi_priv->hdmi_reg = reg;
+ hdmi_priv->has_hdmi_sink = false;
+ psb_intel_output->dev_priv = hdmi_priv;
+
+ drm_encoder_helper_add(encoder, &cdv_hdmi_helper_funcs);
+ drm_connector_helper_add(connector,
+ &cdv_hdmi_connector_helper_funcs);
+ connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+ connector->interlace_allowed = false;
+ connector->doublescan_allowed = false;
+
+ drm_connector_attach_property(connector,
+ dev->mode_config.scaling_mode_property, DRM_MODE_SCALE_FULLSCREEN);
+
+ switch (reg) {
+ case SDVOB:
+ ddc_bus = GPIOE;
+ break;
+ case SDVOC:
+ ddc_bus = GPIOD;
+ break;
+ default:
+ DRM_ERROR("unknown reg 0x%x for HDMI\n", reg);
+ goto failed_ddc;
+ break;
+ }
+
+ psb_intel_output->ddc_bus = psb_intel_i2c_create(dev,
+ ddc_bus, (reg == SDVOB) ? "HDMIB" : "HDMIC");
+
+ if (!psb_intel_output->ddc_bus) {
+ dev_err(dev->dev, "No ddc adapter available!\n");
+ goto failed_ddc;
+ }
+ psb_intel_output->hdmi_i2c_adapter =
+ &(psb_intel_output->ddc_bus->adapter);
+ hdmi_priv->dev = dev;
+ drm_sysfs_connector_add(connector);
+ return;
+
+failed_ddc:
+ drm_encoder_cleanup(&psb_intel_output->enc);
+ drm_connector_cleanup(&psb_intel_output->base);
+ kfree(psb_intel_output);
+}
diff --git a/drivers/gpu/drm/gma500/cdv_intel_lvds.c b/drivers/gpu/drm/gma500/cdv_intel_lvds.c
new file mode 100644
index 0000000..988b2d0
--- /dev/null
+++ b/drivers/gpu/drm/gma500/cdv_intel_lvds.c
@@ -0,0 +1,721 @@
+/*
+ * Copyright © 2006-2011 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authors:
+ * Eric Anholt <eric at anholt.net>
+ * Dave Airlie <airlied at linux.ie>
+ * Jesse Barnes <jesse.barnes at intel.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/dmi.h>
+#include <drm/drmP.h>
+
+#include "intel_bios.h"
+#include "psb_drv.h"
+#include "psb_intel_drv.h"
+#include "psb_intel_reg.h"
+#include "power.h"
+#include <linux/pm_runtime.h>
+#include "cdv_device.h"
+
+/**
+ * LVDS I2C backlight control macros
+ */
+#define BRIGHTNESS_MAX_LEVEL 100
+#define BRIGHTNESS_MASK 0xFF
+#define BLC_I2C_TYPE 0x01
+#define BLC_PWM_TYPT 0x02
+
+#define BLC_POLARITY_NORMAL 0
+#define BLC_POLARITY_INVERSE 1
+
+#define PSB_BLC_MAX_PWM_REG_FREQ (0xFFFE)
+#define PSB_BLC_MIN_PWM_REG_FREQ (0x2)
+#define PSB_BLC_PWM_PRECISION_FACTOR (10)
+#define PSB_BACKLIGHT_PWM_CTL_SHIFT (16)
+#define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)
+
+struct cdv_intel_lvds_priv {
+ /**
+ * Saved LVDO output states
+ */
+ uint32_t savePP_ON;
+ uint32_t savePP_OFF;
+ uint32_t saveLVDS;
+ uint32_t savePP_CONTROL;
+ uint32_t savePP_CYCLE;
+ uint32_t savePFIT_CONTROL;
+ uint32_t savePFIT_PGM_RATIOS;
+ uint32_t saveBLC_PWM_CTL;
+};
+
+/*
+ * Returns the maximum level of the backlight duty cycle field.
+ */
+static u32 cdv_intel_lvds_get_max_backlight(struct drm_device *dev)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ u32 retval;
+
+ if (gma_power_begin(dev, false)) {
+ retval = ((REG_READ(BLC_PWM_CTL) &
+ BACKLIGHT_MODULATION_FREQ_MASK) >>
+ BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
+
+ gma_power_end(dev);
+ } else
+ retval = ((dev_priv->saveBLC_PWM_CTL &
+ BACKLIGHT_MODULATION_FREQ_MASK) >>
+ BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
+
+ return retval;
+}
+
+/*
+ * Set LVDS backlight level by I2C command
+ */
+static int cdv_lvds_i2c_set_brightness(struct drm_device *dev,
+ unsigned int level)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ struct psb_intel_i2c_chan *lvds_i2c_bus = dev_priv->lvds_i2c_bus;
+ u8 out_buf[2];
+ unsigned int blc_i2c_brightness;
+
+ struct i2c_msg msgs[] = {
+ {
+ .addr = lvds_i2c_bus->slave_addr,
+ .flags = 0,
+ .len = 2,
+ .buf = out_buf,
+ }
+ };
+
+ blc_i2c_brightness = BRIGHTNESS_MASK & ((unsigned int)level *
+ BRIGHTNESS_MASK /
+ BRIGHTNESS_MAX_LEVEL);
+
+ if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE)
+ blc_i2c_brightness = BRIGHTNESS_MASK - blc_i2c_brightness;
+
+ out_buf[0] = dev_priv->lvds_bl->brightnesscmd;
+ out_buf[1] = (u8)blc_i2c_brightness;
+
+ if (i2c_transfer(&lvds_i2c_bus->adapter, msgs, 1) == 1)
+ return 0;
+
+ DRM_ERROR("I2C transfer error\n");
+ return -1;
+}
+
+
+static int cdv_lvds_pwm_set_brightness(struct drm_device *dev, int level)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+
+ u32 max_pwm_blc;
+ u32 blc_pwm_duty_cycle;
+
+ max_pwm_blc = cdv_intel_lvds_get_max_backlight(dev);
+
+ /*BLC_PWM_CTL Should be initiated while backlight device init*/
+ BUG_ON((max_pwm_blc & PSB_BLC_MAX_PWM_REG_FREQ) == 0);
+
+ blc_pwm_duty_cycle = level * max_pwm_blc / BRIGHTNESS_MAX_LEVEL;
+
+ if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE)
+ blc_pwm_duty_cycle = max_pwm_blc - blc_pwm_duty_cycle;
+
+ blc_pwm_duty_cycle &= PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR;
+ REG_WRITE(BLC_PWM_CTL,
+ (max_pwm_blc << PSB_BACKLIGHT_PWM_CTL_SHIFT) |
+ (blc_pwm_duty_cycle));
+
+ return 0;
+}
+
+/*
+ * Set LVDS backlight level either by I2C or PWM
+ */
+void cdv_intel_lvds_set_brightness(struct drm_device *dev, int level)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+
+ if (!dev_priv->lvds_bl) {
+ DRM_ERROR("NO LVDS Backlight Info\n");
+ return;
+ }
+
+ if (dev_priv->lvds_bl->type == BLC_I2C_TYPE)
+ cdv_lvds_i2c_set_brightness(dev, level);
+ else
+ cdv_lvds_pwm_set_brightness(dev, level);
+}
+
+/**
+ * Sets the backlight level.
+ *
+ * level backlight level, from 0 to cdv_intel_lvds_get_max_backlight().
+ */
+static void cdv_intel_lvds_set_backlight(struct drm_device *dev, int level)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ u32 blc_pwm_ctl;
+
+ if (gma_power_begin(dev, false)) {
+ blc_pwm_ctl =
+ REG_READ(BLC_PWM_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK;
+ REG_WRITE(BLC_PWM_CTL,
+ (blc_pwm_ctl |
+ (level << BACKLIGHT_DUTY_CYCLE_SHIFT)));
+ gma_power_end(dev);
+ } else {
+ blc_pwm_ctl = dev_priv->saveBLC_PWM_CTL &
+ ~BACKLIGHT_DUTY_CYCLE_MASK;
+ dev_priv->saveBLC_PWM_CTL = (blc_pwm_ctl |
+ (level << BACKLIGHT_DUTY_CYCLE_SHIFT));
+ }
+}
+
+/**
+ * Sets the power state for the panel.
+ */
+static void cdv_intel_lvds_set_power(struct drm_device *dev,
+ struct psb_intel_output *output, bool on)
+{
+ u32 pp_status;
+
+ if (!gma_power_begin(dev, true))
+ return;
+
+ if (on) {
+ REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) |
+ POWER_TARGET_ON);
+ do {
+ pp_status = REG_READ(PP_STATUS);
+ } while ((pp_status & PP_ON) == 0);
+
+ cdv_intel_lvds_set_backlight(dev,
+ output->
+ mode_dev->backlight_duty_cycle);
+ } else {
+ cdv_intel_lvds_set_backlight(dev, 0);
+
+ REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) &
+ ~POWER_TARGET_ON);
+ do {
+ pp_status = REG_READ(PP_STATUS);
+ } while (pp_status & PP_ON);
+ }
+ gma_power_end(dev);
+}
+
+static void cdv_intel_lvds_encoder_dpms(struct drm_encoder *encoder, int mode)
+{
+ struct drm_device *dev = encoder->dev;
+ struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+ if (mode == DRM_MODE_DPMS_ON)
+ cdv_intel_lvds_set_power(dev, output, true);
+ else
+ cdv_intel_lvds_set_power(dev, output, false);
+ /* XXX: We never power down the LVDS pairs. */
+}
+
+static void cdv_intel_lvds_save(struct drm_connector *connector)
+{
+}
+
+static void cdv_intel_lvds_restore(struct drm_connector *connector)
+{
+}
+
+int cdv_intel_lvds_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ struct psb_intel_output *psb_intel_output =
+ to_psb_intel_output(connector);
+ struct drm_display_mode *fixed_mode =
+ psb_intel_output->mode_dev->panel_fixed_mode;
+
+ /* just in case */
+ if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+ return MODE_NO_DBLESCAN;
+
+ /* just in case */
+ if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+ return MODE_NO_INTERLACE;
+
+ if (fixed_mode) {
+ if (mode->hdisplay > fixed_mode->hdisplay)
+ return MODE_PANEL;
+ if (mode->vdisplay > fixed_mode->vdisplay)
+ return MODE_PANEL;
+ }
+ return MODE_OK;
+}
+
+bool cdv_intel_lvds_mode_fixup(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct psb_intel_mode_device *mode_dev =
+ enc_to_psb_intel_output(encoder)->mode_dev;
+ struct drm_device *dev = encoder->dev;
+ struct drm_encoder *tmp_encoder;
+ struct drm_display_mode *panel_fixed_mode = mode_dev->panel_fixed_mode;
+
+ /* Should never happen!! */
+ list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list,
+ head) {
+ if (tmp_encoder != encoder
+ && tmp_encoder->crtc == encoder->crtc) {
+ printk(KERN_ERR "Can't enable LVDS and another "
+ "encoder on the same pipe\n");
+ return false;
+ }
+ }
+
+ /*
+ * If we have timings from the BIOS for the panel, put them in
+ * to the adjusted mode. The CRTC will be set up for this mode,
+ * with the panel scaling set up to source from the H/VDisplay
+ * of the original mode.
+ */
+ if (panel_fixed_mode != NULL) {
+ adjusted_mode->hdisplay = panel_fixed_mode->hdisplay;
+ adjusted_mode->hsync_start = panel_fixed_mode->hsync_start;
+ adjusted_mode->hsync_end = panel_fixed_mode->hsync_end;
+ adjusted_mode->htotal = panel_fixed_mode->htotal;
+ adjusted_mode->vdisplay = panel_fixed_mode->vdisplay;
+ adjusted_mode->vsync_start = panel_fixed_mode->vsync_start;
+ adjusted_mode->vsync_end = panel_fixed_mode->vsync_end;
+ adjusted_mode->vtotal = panel_fixed_mode->vtotal;
+ adjusted_mode->clock = panel_fixed_mode->clock;
+ drm_mode_set_crtcinfo(adjusted_mode,
+ CRTC_INTERLACE_HALVE_V);
+ }
+
+ /*
+ * XXX: It would be nice to support lower refresh rates on the
+ * panels to reduce power consumption, and perhaps match the
+ * user's requested refresh rate.
+ */
+
+ return true;
+}
+
+static void cdv_intel_lvds_prepare(struct drm_encoder *encoder)
+{
+ struct drm_device *dev = encoder->dev;
+ struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+ struct psb_intel_mode_device *mode_dev = output->mode_dev;
+
+ if (!gma_power_begin(dev, true))
+ return;
+
+ mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL);
+ mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL &
+ BACKLIGHT_DUTY_CYCLE_MASK);
+
+ cdv_intel_lvds_set_power(dev, output, false);
+
+ gma_power_end(dev);
+}
+
+static void cdv_intel_lvds_commit(struct drm_encoder *encoder)
+{
+ struct drm_device *dev = encoder->dev;
+ struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+ struct psb_intel_mode_device *mode_dev = output->mode_dev;
+
+ if (mode_dev->backlight_duty_cycle == 0)
+ mode_dev->backlight_duty_cycle =
+ cdv_intel_lvds_get_max_backlight(dev);
+
+ cdv_intel_lvds_set_power(dev, output, true);
+}
+
+static void cdv_intel_lvds_mode_set(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct drm_device *dev = encoder->dev;
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ u32 pfit_control;
+
+ /*
+ * The LVDS pin pair will already have been turned on in the
+ * cdv_intel_crtc_mode_set since it has a large impact on the DPLL
+ * settings.
+ */
+
+ /*
+ * Enable automatic panel scaling so that non-native modes fill the
+ * screen. Should be enabled before the pipe is enabled, according to
+ * register description and PRM.
+ */
+ if (mode->hdisplay != adjusted_mode->hdisplay ||
+ mode->vdisplay != adjusted_mode->vdisplay)
+ pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE |
+ HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR |
+ HORIZ_INTERP_BILINEAR);
+ else
+ pfit_control = 0;
+
+ if (dev_priv->lvds_dither)
+ pfit_control |= PANEL_8TO6_DITHER_ENABLE;
+
+ REG_WRITE(PFIT_CONTROL, pfit_control);
+}
+
+/**
+ * Detect the LVDS connection.
+ *
+ * This always returns CONNECTOR_STATUS_CONNECTED.
+ * This connector should only have
+ * been set up if the LVDS was actually connected anyway.
+ */
+static enum drm_connector_status cdv_intel_lvds_detect(
+ struct drm_connector *connector, bool force)
+{
+ return connector_status_connected;
+}
+
+/**
+ * Return the list of DDC modes if available, or the BIOS fixed mode otherwise.
+ */
+static int cdv_intel_lvds_get_modes(struct drm_connector *connector)
+{
+ struct drm_device *dev = connector->dev;
+ struct psb_intel_output *psb_intel_output =
+ to_psb_intel_output(connector);
+ struct psb_intel_mode_device *mode_dev =
+ psb_intel_output->mode_dev;
+ int ret;
+
+ ret = psb_intel_ddc_get_modes(psb_intel_output);
+
+ if (ret)
+ return ret;
+
+ /* Didn't get an EDID, so
+ * Set wide sync ranges so we get all modes
+ * handed to valid_mode for checking
+ */
+ connector->display_info.min_vfreq = 0;
+ connector->display_info.max_vfreq = 200;
+ connector->display_info.min_hfreq = 0;
+ connector->display_info.max_hfreq = 200;
+ if (mode_dev->panel_fixed_mode != NULL) {
+ struct drm_display_mode *mode =
+ drm_mode_duplicate(dev, mode_dev->panel_fixed_mode);
+ drm_mode_probed_add(connector, mode);
+ return 1;
+ }
+
+ return 0;
+}
+
+/**
+ * cdv_intel_lvds_destroy - unregister and free LVDS structures
+ * @connector: connector to free
+ *
+ * Unregister the DDC bus for this connector then free the driver private
+ * structure.
+ */
+void cdv_intel_lvds_destroy(struct drm_connector *connector)
+{
+ struct psb_intel_output *psb_intel_output =
+ to_psb_intel_output(connector);
+
+ if (psb_intel_output->ddc_bus)
+ psb_intel_i2c_destroy(psb_intel_output->ddc_bus);
+ drm_sysfs_connector_remove(connector);
+ drm_connector_cleanup(connector);
+ kfree(connector);
+}
+
+int cdv_intel_lvds_set_property(struct drm_connector *connector,
+ struct drm_property *property,
+ uint64_t value)
+{
+ struct drm_encoder *encoder = connector->encoder;
+
+ if (!strcmp(property->name, "scaling mode") && encoder) {
+ struct psb_intel_crtc *crtc =
+ to_psb_intel_crtc(encoder->crtc);
+ uint64_t curValue;
+
+ if (!crtc)
+ return -1;
+
+ switch (value) {
+ case DRM_MODE_SCALE_FULLSCREEN:
+ break;
+ case DRM_MODE_SCALE_NO_SCALE:
+ break;
+ case DRM_MODE_SCALE_ASPECT:
+ break;
+ default:
+ return -1;
+ }
+
+ if (drm_connector_property_get_value(connector,
+ property,
+ &curValue))
+ return -1;
+
+ if (curValue == value)
+ return 0;
+
+ if (drm_connector_property_set_value(connector,
+ property,
+ value))
+ return -1;
+
+ if (crtc->saved_mode.hdisplay != 0 &&
+ crtc->saved_mode.vdisplay != 0) {
+ if (!drm_crtc_helper_set_mode(encoder->crtc,
+ &crtc->saved_mode,
+ encoder->crtc->x,
+ encoder->crtc->y,
+ encoder->crtc->fb))
+ return -1;
+ }
+ } else if (!strcmp(property->name, "backlight") && encoder) {
+ if (drm_connector_property_set_value(connector,
+ property,
+ value))
+ return -1;
+ else {
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+ struct drm_psb_private *dev_priv =
+ encoder->dev->dev_private;
+ struct backlight_device *bd =
+ dev_priv->backlight_device;
+ bd->props.brightness = value;
+ backlight_update_status(bd);
+#endif
+ }
+ } else if (!strcmp(property->name, "DPMS") && encoder) {
+ struct drm_encoder_helper_funcs *helpers =
+ encoder->helper_private;
+ helpers->dpms(encoder, value);
+ }
+ return 0;
+}
+
+static const struct drm_encoder_helper_funcs
+ cdv_intel_lvds_helper_funcs = {
+ .dpms = cdv_intel_lvds_encoder_dpms,
+ .mode_fixup = cdv_intel_lvds_mode_fixup,
+ .prepare = cdv_intel_lvds_prepare,
+ .mode_set = cdv_intel_lvds_mode_set,
+ .commit = cdv_intel_lvds_commit,
+};
+
+static const struct drm_connector_helper_funcs
+ cdv_intel_lvds_connector_helper_funcs = {
+ .get_modes = cdv_intel_lvds_get_modes,
+ .mode_valid = cdv_intel_lvds_mode_valid,
+ .best_encoder = psb_intel_best_encoder,
+};
+
+static const struct drm_connector_funcs cdv_intel_lvds_connector_funcs = {
+ .dpms = drm_helper_connector_dpms,
+ .save = cdv_intel_lvds_save,
+ .restore = cdv_intel_lvds_restore,
+ .detect = cdv_intel_lvds_detect,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .set_property = cdv_intel_lvds_set_property,
+ .destroy = cdv_intel_lvds_destroy,
+};
+
+
+static void cdv_intel_lvds_enc_destroy(struct drm_encoder *encoder)
+{
+ drm_encoder_cleanup(encoder);
+}
+
+const struct drm_encoder_funcs cdv_intel_lvds_enc_funcs = {
+ .destroy = cdv_intel_lvds_enc_destroy,
+};
+
+/**
+ * cdv_intel_lvds_init - setup LVDS connectors on this device
+ * @dev: drm device
+ *
+ * Create the connector, register the LVDS DDC bus, and try to figure out what
+ * modes we can display on the LVDS panel (if present).
+ */
+void cdv_intel_lvds_init(struct drm_device *dev,
+ struct psb_intel_mode_device *mode_dev)
+{
+ struct psb_intel_output *psb_intel_output;
+ struct cdv_intel_lvds_priv *lvds_priv;
+ struct drm_connector *connector;
+ struct drm_encoder *encoder;
+ struct drm_display_mode *scan;
+ struct drm_crtc *crtc;
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ u32 lvds;
+ int pipe;
+
+ psb_intel_output = kzalloc(sizeof(struct psb_intel_output) +
+ sizeof(struct cdv_intel_lvds_priv), GFP_KERNEL);
+ if (!psb_intel_output)
+ return;
+
+ lvds_priv = (struct cdv_intel_lvds_priv *)(psb_intel_output + 1);
+
+ psb_intel_output->dev_priv = lvds_priv;
+
+ psb_intel_output->mode_dev = mode_dev;
+ connector = &psb_intel_output->base;
+ encoder = &psb_intel_output->enc;
+
+
+ drm_connector_init(dev, &psb_intel_output->base,
+ &cdv_intel_lvds_connector_funcs,
+ DRM_MODE_CONNECTOR_LVDS);
+
+ drm_encoder_init(dev, &psb_intel_output->enc,
+ &cdv_intel_lvds_enc_funcs,
+ DRM_MODE_ENCODER_LVDS);
+
+
+ drm_mode_connector_attach_encoder(&psb_intel_output->base,
+ &psb_intel_output->enc);
+ psb_intel_output->type = INTEL_OUTPUT_LVDS;
+
+ drm_encoder_helper_add(encoder, &cdv_intel_lvds_helper_funcs);
+ drm_connector_helper_add(connector,
+ &cdv_intel_lvds_connector_helper_funcs);
+ connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+ connector->interlace_allowed = false;
+ connector->doublescan_allowed = false;
+
+ /*Attach connector properties*/
+ drm_connector_attach_property(connector,
+ dev->mode_config.scaling_mode_property,
+ DRM_MODE_SCALE_FULLSCREEN);
+ drm_connector_attach_property(connector,
+ dev_priv->backlight_property,
+ BRIGHTNESS_MAX_LEVEL);
+
+ /**
+ * Set up I2C bus
+ * FIXME: distroy i2c_bus when exit
+ */
+ psb_intel_output->i2c_bus = psb_intel_i2c_create(dev,
+ GPIOB,
+ "LVDSBLC_B");
+ if (!psb_intel_output->i2c_bus) {
+ dev_printk(KERN_ERR,
+ &dev->pdev->dev, "I2C bus registration failed.\n");
+ goto failed_blc_i2c;
+ }
+ psb_intel_output->i2c_bus->slave_addr = 0x2C;
+ dev_priv->lvds_i2c_bus = psb_intel_output->i2c_bus;
+
+ /*
+ * LVDS discovery:
+ * 1) check for EDID on DDC
+ * 2) check for VBT data
+ * 3) check to see if LVDS is already on
+ * if none of the above, no panel
+ * 4) make sure lid is open
+ * if closed, act like it's not there for now
+ */
+
+ /* Set up the DDC bus. */
+ psb_intel_output->ddc_bus = psb_intel_i2c_create(dev,
+ GPIOC,
+ "LVDSDDC_C");
+ if (!psb_intel_output->ddc_bus) {
+ dev_printk(KERN_ERR, &dev->pdev->dev,
+ "DDC bus registration " "failed.\n");
+ goto failed_ddc;
+ }
+
+ /*
+ * Attempt to get the fixed panel mode from DDC. Assume that the
+ * preferred mode is the right one.
+ */
+ psb_intel_ddc_get_modes(psb_intel_output);
+ list_for_each_entry(scan, &connector->probed_modes, head) {
+ if (scan->type & DRM_MODE_TYPE_PREFERRED) {
+ mode_dev->panel_fixed_mode =
+ drm_mode_duplicate(dev, scan);
+ goto out; /* FIXME: check for quirks */
+ }
+ }
+
+ /* Failed to get EDID, what about VBT? do we need this?*/
+ if (dev_priv->lfp_lvds_vbt_mode) {
+ mode_dev->panel_fixed_mode =
+ drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
+ if (mode_dev->panel_fixed_mode) {
+ mode_dev->panel_fixed_mode->type |=
+ DRM_MODE_TYPE_PREFERRED;
+ goto out; /* FIXME: check for quirks */
+ }
+ }
+ /*
+ * If we didn't get EDID, try checking if the panel is already turned
+ * on. If so, assume that whatever is currently programmed is the
+ * correct mode.
+ */
+ lvds = REG_READ(LVDS);
+ pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0;
+ crtc = psb_intel_get_crtc_from_pipe(dev, pipe);
+
+ if (crtc && (lvds & LVDS_PORT_EN)) {
+ mode_dev->panel_fixed_mode =
+ cdv_intel_crtc_mode_get(dev, crtc);
+ if (mode_dev->panel_fixed_mode) {
+ mode_dev->panel_fixed_mode->type |=
+ DRM_MODE_TYPE_PREFERRED;
+ goto out; /* FIXME: check for quirks */
+ }
+ }
+
+ /* If we still don't have a mode after all that, give up. */
+ if (!mode_dev->panel_fixed_mode) {
+ DRM_DEBUG
+ ("Found no modes on the lvds, ignoring the LVDS\n");
+ goto failed_find;
+ }
+
+out:
+ drm_sysfs_connector_add(connector);
+ return;
+
+failed_find:
+ printk(KERN_ERR "Failed find\n");
+ if (psb_intel_output->ddc_bus)
+ psb_intel_i2c_destroy(psb_intel_output->ddc_bus);
+failed_ddc:
+ printk(KERN_ERR "Failed DDC\n");
+ if (psb_intel_output->i2c_bus)
+ psb_intel_i2c_destroy(psb_intel_output->i2c_bus);
+failed_blc_i2c:
+ printk(KERN_ERR "Failed BLC\n");
+ drm_encoder_cleanup(encoder);
+ drm_connector_cleanup(connector);
+ kfree(connector);
+}
More information about the dri-devel
mailing list