[PATCH 3/9] drv/i915: Pull display_clock_mode out of VBT table
Keith Packard
keithp at keithp.com
Mon Sep 26 23:11:40 PDT 2011
This tells the driver whether a CK505 clock source is available on
pre-PCH hardware. If so, it should be used as the non-SSC source,
leaving the internal clock for use as the SSC source.
Signed-off-by: Keith Packard <keithp at keithp.com>
---
drivers/gpu/drm/i915/i915_drv.h | 1 +
drivers/gpu/drm/i915/intel_bios.c | 6 ++++--
drivers/gpu/drm/i915/intel_bios.h | 4 +++-
3 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 7916bd9..18df595 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -357,6 +357,7 @@ typedef struct drm_i915_private {
unsigned int lvds_vbt:1;
unsigned int int_crt_support:1;
unsigned int lvds_use_ssc:1;
+ unsigned int display_clock_mode:1;
int lvds_ssc_freq;
struct {
int rate;
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index dcbc839..eb58784 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -309,11 +309,13 @@ parse_general_features(struct drm_i915_private *dev_priv,
dev_priv->lvds_use_ssc = general->enable_ssc;
dev_priv->lvds_ssc_freq =
intel_bios_ssc_frequency(dev, general->ssc_freq);
- DRM_DEBUG_KMS("BDB_GENERAL_FEATURES int_tv_support %d int_crt_support %d lvds_use_ssc %d lvds_ssc_freq %d\n",
+ dev_priv->display_clock_mode = general->display_clock_mode;
+ DRM_DEBUG_KMS("BDB_GENERAL_FEATURES int_tv_support %d int_crt_support %d lvds_use_ssc %d lvds_ssc_freq %d display_clock_mode %d\n",
dev_priv->int_tv_support,
dev_priv->int_crt_support,
dev_priv->lvds_use_ssc,
- dev_priv->lvds_ssc_freq);
+ dev_priv->lvds_ssc_freq,
+ dev_priv->display_clock_mode);
}
}
diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h
index 5f8e4ed..02b1b624 100644
--- a/drivers/gpu/drm/i915/intel_bios.h
+++ b/drivers/gpu/drm/i915/intel_bios.h
@@ -120,7 +120,9 @@ struct bdb_general_features {
u8 ssc_freq:1;
u8 enable_lfp_on_override:1;
u8 disable_ssc_ddt:1;
- u8 rsvd8:3; /* finish byte */
+ u8 rsvd7:1;
+ u8 display_clock_mode:1;
+ u8 rsvd8:1; /* finish byte */
/* bits 3 */
u8 disable_smooth_vision:1;
--
1.7.6.3
More information about the dri-devel
mailing list