[PATCH 11/11] v4l: vb2: Add dma-contig allocator as dma_buf user

[Tomasz Stanislawski]

Hi Laurent,
Thanks for review.

On 04/06/2012 05:12 PM, Laurent Pinchart wrote:
> Hi Tomasz,
> 
> On Thursday 05 April 2012 16:00:08 Tomasz Stanislawski wrote:
>> From: Sumit Semwal <sumit.semwal at ti.com>
>>
>> This patch makes changes for adding dma-contig as a dma_buf user. It
>> provides function implementations for the {attach, detach, map,
>> unmap}_dmabuf() mem_ops of DMABUF memory type.
>>
>> Signed-off-by: Sumit Semwal <sumit.semwal at ti.com>
>> Signed-off-by: Sumit Semwal <sumit.semwal at linaro.org>
>> 	[author of the original patch]
>> Signed-off-by: Tomasz Stanislawski <t.stanislaws at samsung.com>
>> 	[integration with refactored dma-contig allocator]
>> ---
>>  drivers/media/video/videobuf2-dma-contig.c |  117 +++++++++++++++++++++++++
>>  1 files changed, 117 insertions(+), 0 deletions(-)
>>
>> diff --git a/drivers/media/video/videobuf2-dma-contig.c
>> b/drivers/media/video/videobuf2-dma-contig.c index 30f316588..6329483
>> 100644
>> --- a/drivers/media/video/videobuf2-dma-contig.c
>> +++ b/drivers/media/video/videobuf2-dma-contig.c
>> @@ -10,6 +10,7 @@
>>   * the Free Software Foundation.
>>   */
>>
>> +#include <linux/dma-buf.h>
>>  #include <linux/module.h>
>>  #include <linux/scatterlist.h>
>>  #include <linux/sched.h>
>> @@ -33,6 +34,9 @@ struct vb2_dc_buf {
>>
>>  	/* USERPTR related */
>>  	struct vm_area_struct		*vma;
>> +
>> +	/* DMABUF related */
>> +	struct dma_buf_attachment	*db_attach;
>>  };
>>
>>  /*********************************************/
>> @@ -425,6 +429,115 @@ fail_buf:
>>  }
>>
>>  /*********************************************/
>> +/*       callbacks for DMABUF buffers        */
>> +/*********************************************/
>> +
>> +static int vb2_dc_map_dmabuf(void *mem_priv)
>> +{
>> +	struct vb2_dc_buf *buf = mem_priv;
>> +	struct sg_table *sgt;
>> +	unsigned long contig_size;
>> +	int ret = 0;
>> +
>> +	if (WARN_ON(!buf->db_attach)) {
>> +		printk(KERN_ERR "trying to pin a non attached buffer\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	if (WARN_ON(buf->dma_sgt)) {
>> +		printk(KERN_ERR "dmabuf buffer is already pinned\n");
>> +		return 0;
>> +	}
>> +
>> +	/* get the associated scatterlist for this buffer */
>> +	sgt = dma_buf_map_attachment(buf->db_attach, buf->dma_dir);
>> +	if (IS_ERR_OR_NULL(sgt)) {
>> +		printk(KERN_ERR "Error getting dmabuf scatterlist\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	/* checking if dmabuf is big enough to store contiguous chunk */
>> +	contig_size = vb2_dc_get_contiguous_size(sgt);
>> +	if (contig_size < buf->size) {
>> +		printk(KERN_ERR "contiguous chunk of dmabuf is too small\n");
>> +		ret = -EFAULT;
>> +		goto fail_map;
> 
> The fail_map label is only used here, you can move the 
> dma_buf_unmap_attachment() call here and return -EFAULT directly.
> 

Patch "[RFC 07/13] v4l: vb2-dma-contig: change map/unmap behaviour for importers"
introduces other cleanup labels. Anyway I will remove this redundant label as
you proposed.

>> +	}
>> +
>> +	buf->dma_addr = sg_dma_address(sgt->sgl);
>> +	buf->dma_sgt = sgt;
>> +
>> +	return 0;
>> +
>> +fail_map:
>> +	dma_buf_unmap_attachment(buf->db_attach, sgt, buf->dma_dir);
>> +
>> +	return ret;
>> +}
>> +
>> +static void vb2_dc_unmap_dmabuf(void *mem_priv)
>> +{
>> +	struct vb2_dc_buf *buf = mem_priv;
>> +	struct sg_table *sgt = buf->dma_sgt;
>> +
>> +	if (WARN_ON(!buf->db_attach)) {
>> +		printk(KERN_ERR "trying to unpin a not attached buffer\n");
>> +		return;
>> +	}
>> +
>> +	if (WARN_ON(!sgt)) {
>> +		printk(KERN_ERR "dmabuf buffer is already unpinned\n");
>> +		return;
>> +	}
>> +
>> +	dma_buf_unmap_attachment(buf->db_attach, sgt, buf->dma_dir);
>> +
>> +	buf->dma_addr = 0;
>> +	buf->dma_sgt = NULL;
>> +}
>> +
>> +static void vb2_dc_detach_dmabuf(void *mem_priv)
>> +{
>> +	struct vb2_dc_buf *buf = mem_priv;
>> +
>> +	if (buf->dma_addr)
>> +		vb2_dc_unmap_dmabuf(buf);
> 
> What would you think about calling vb2_dc_unmap_dmabuf() from vb2 core 
> instead, to keep the map/unmap calls symmetrical (the second WARN_ON and the 
> related printk in vb2_dc_unmap_dmabuf() might need to go then) ?
> 

Detach without unmap may happen in a case of closing a video fd
without prior dequeuing of all buffers.

A call map_dmabuf should be moved to __enqueue_in_driver and add calling
unmap_dmabuf to vb2_buffer_done in order to keep map/unmap calls
symmetrical. I'll check if this could work.

Regards,
Tomasz Stanislawski