[PATCH 08/11] v4l: vb2-dma-contig: add support for scatterlist in userptr mode

[Laurent Pinchart]

Hi Marek,

On Tuesday 17 April 2012 13:25:56 Marek Szyprowski wrote:
> On Tuesday, April 17, 2012 2:41 AM Laurent Pinchart wrote:
> 
> (snipped)
> 
> > > >> +static struct vm_area_struct *vb2_dc_get_user_vma(
> > > >> +	unsigned long start, unsigned long size)
> > > >> +{
> > > >> +	struct vm_area_struct *vma;
> > > >> +
> > > >> +	/* current->mm->mmap_sem is taken by videobuf2 core */
> > > >> +	vma = find_vma(current->mm, start);
> > > >> +	if (!vma) {
> > > >> +		printk(KERN_ERR "no vma for address %lu\n", start);
> > > >> +		return ERR_PTR(-EFAULT);
> > > >> +	}
> > > >> +
> > > >> +	if (vma->vm_end - vma->vm_start < size) {
> > > >> +		printk(KERN_ERR "vma at %lu is too small for %lu bytes\n",
> > > >> +			start, size);
> > > >> +		return ERR_PTR(-EFAULT);
> > > >> +	}
> > > > 
> > > > Should we support multiple VMAs, or do you think that's not worth it ?
> > > 
> > > What do you mean by multiple VMAs?
> > 
> > I mean multiple VMAs for a single userspace buffer. It's probably
> > overkill, but I'm not familiar enough with the memory management code to
> > be sure. Do you have more insight ?
> 
> Multiple VMAs means that userspace did something really hacky in the
> specified address range, I'm really convinced that we should not bother
> supporting such cases.

I agree. I just wanted to make sure that I wasn't forgetting an important use 
case.

> With user pointer mode You usually want to get access to either anonymous
> pages (malloc and friends) or the memory somehow allocated by the other
> device (mmaped to userspace). In both cases it available as a single VMA.
> VMAs with anonymous memory are merged together if they get extended to meet
> side-by-side each other.
> 
> > > >> +	vma = vb2_get_vma(vma);
> > > >> +	if (!vma) {
> > > >> +		printk(KERN_ERR "failed to copy vma\n");
> > > >> +		return ERR_PTR(-ENOMEM);
> > > >> +	}
> > > > 
> > > > I still think there's no need to copy the VMA. get_user_pages() will
> > > > make sure the memory doesn't get paged out, and we don't need to
> > > > ensure that the userspace mapping stays in place as our cache
> > > > operations use a scatter list. Storing the result of vma_is_io() in
> > > > vb2_dc_buf should be enough.
> > > 
> > > As I understand calling get_user_pages ensures that pages are not going
> > > to be swapped or freed. I agree that it provides enough protection for
> > > the memory.
> > > 
> > > IO mappings are the problem. As you mentioned few mails ago get_page
> > > would likely crash for such pages. AFAIK increasing reference count for
> > > VMA could be a reliable mechanism for protecting the memory from being
> > > freed.
> > 
> > The main use case here (which is actually the only use case I have
> > encountered) is memory reserved at boot time to be used by specific
> > devices such as frame buffers. That memory will never be paged out, so I
> > don't think there's an issue here. Regarding freeing, it will likely not
> > be freed either, and if it does, I doubt that duplicating the VMA will
> > make any difference.
>
> We use user pointer method also to access buffers allocated dynamically by
> other v4l2 devices (we have quite a lot of the in our system). In this case
> duplicating VMA is necessary.
> 
> > > The problem is that VMA has no reference counters in it. Calling open
> > > ops will protect the memory. However it will not protect VMA structure
> > > from being freed!
> > > 
> > > Analyze following scenario:
> > > 
> > > - mmap -> returns userptr
> > > - qbuf (userptr)
> > > - unmap (userptr)
> > > - dqbuf
> > > 
> > > The VMA will be destroyed at unmap but memory will not be released.
> > > 
> > > The reason is that open ops was called at qbuf.
> > 
> > I think I see your point. You want to make sure that the exporter driver
> > (on which mmap() has been called) will not release the memory, and to do
> > so you call the exporter's open() vm operation when you acquire the
> > memory. To call the exporter's close() operation when you release the
> > memory you need a pointer to the VMA, but the original VMA might have
> > disappeared. To work around the problem you make a copy of the VMA and
> > use it when releasing the memory.
> > 
> > That's a pretty dirty hack. Most of the copy VMA fields will be invalid
> > when you use it. On a side note, would storing vm_ops and vm_private_data
> > be enough ? I'm also not sure if we need to call get_file() and
> > put_file().
> 
> This code is there from the beginning of the videobuf2. The main problem is
> the fact that you cannot get a reliable access to user pointer memory which
> is not described with anonymous pages. The hacks/workarounds we use at
> works really well with the memory mmaped by the other v4l2 devices (which
> use vm_open/ vm_close refcounting) and framebuffers which use no
> refcounting on vma, but we force them not to release memory by calling
> get_file() (so the framebuffer driver cannot be removed/unloaded once we
> use its memory, yes, pretty theoretical case).
> 
> Copying vma was the only solution for the races that usually happen on
> process cleanup or special 'nasty' test case which closed the device before
> closing the other v4l2 which used its memory with user pointer method.
> 
> The most critical parts of vma are NULLed (vm_mm, vm_next, vm_prev) to catch
> possible issues, but the sane close callback should not touch them anyway.
> Besides vm_private_data, close callback might need to access vm_file,
> vm_start/vm_end and vm_flags. Maybe coping them explicitly while keeping
> everything else NULLed would be a better idea.

Thank you for the clarification. I'm very eager to see DMABUF being adopted 
everywhere, so that we can get rid of those hacks :-)

-- 
Regards,

Laurent Pinchart