[PATCH 06/12] gma500: panel presence check

Alan Cox alan at lxorguk.ukuu.org.uk
Wed Apr 25 06:37:27 PDT 2012


From: Alan Cox <alan at linux.intel.com>

Introduce a panel presence check for Cedartrail. Non netbook devices don't
necessarily have a panel attached.

Signed-off-by: Alan Cox <alan at linux.intel.com>
---

 drivers/gpu/drm/gma500/cdv_intel_lvds.c |   57 +++++++++++++++++++++++++++++++
 1 files changed, 57 insertions(+), 0 deletions(-)

diff --git a/drivers/gpu/drm/gma500/cdv_intel_lvds.c b/drivers/gpu/drm/gma500/cdv_intel_lvds.c
index 8359c1a..c87b179 100644
--- a/drivers/gpu/drm/gma500/cdv_intel_lvds.c
+++ b/drivers/gpu/drm/gma500/cdv_intel_lvds.c
@@ -556,6 +556,56 @@ const struct drm_encoder_funcs cdv_intel_lvds_enc_funcs = {
 	.destroy = cdv_intel_lvds_enc_destroy,
 };
 
+/*
+ * Enumerate the child dev array parsed from VBT to check whether
+ * the LVDS is present.
+ * If it is present, return 1.
+ * If it is not present, return false.
+ * If no child dev is parsed from VBT, it assumes that the LVDS is present.
+ */
+static bool lvds_is_present_in_vbt(struct drm_device *dev,
+				   u8 *i2c_pin)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	int i;
+
+	if (!dev_priv->child_dev_num)
+		return true;
+
+	for (i = 0; i < dev_priv->child_dev_num; i++) {
+		struct child_device_config *child = dev_priv->child_dev + i;
+
+		/* If the device type is not LFP, continue.
+		 * We have to check both the new identifiers as well as the
+		 * old for compatibility with some BIOSes.
+		 */
+		if (child->device_type != DEVICE_TYPE_INT_LFP &&
+		    child->device_type != DEVICE_TYPE_LFP)
+			continue;
+
+		if (child->i2c_pin)
+		    *i2c_pin = child->i2c_pin;
+
+		/* However, we cannot trust the BIOS writers to populate
+		 * the VBT correctly.  Since LVDS requires additional
+		 * information from AIM blocks, a non-zero addin offset is
+		 * a good indicator that the LVDS is actually present.
+		 */
+		if (child->addin_offset)
+			return true;
+
+		/* But even then some BIOS writers perform some black magic
+		 * and instantiate the device without reference to any
+		 * additional data.  Trust that if the VBT was written into
+		 * the OpRegion then they have validated the LVDS's existence.
+		 */
+		if (dev_priv->opregion.vbt)
+			return true;
+	}
+
+	return false;
+}
+
 /**
  * cdv_intel_lvds_init - setup LVDS connectors on this device
  * @dev: drm device
@@ -576,6 +626,13 @@ void cdv_intel_lvds_init(struct drm_device *dev,
 	struct drm_psb_private *dev_priv = dev->dev_private;
 	u32 lvds;
 	int pipe;
+	u8 pin;
+
+	pin = GMBUS_PORT_PANEL;
+	if (!lvds_is_present_in_vbt(dev, &pin)) {
+		DRM_DEBUG_KMS("LVDS is not present in VBT\n");
+		return;
+	}
 
 	psb_intel_encoder = kzalloc(sizeof(struct psb_intel_encoder),
 				    GFP_KERNEL);



More information about the dri-devel mailing list