[PATCH v3 1/3] Rename i2f() to int2float(), and make it global so one copy can be removed.
Steven Fuerst
svfuerst at gmail.com
Wed Aug 15 15:07:14 PDT 2012
Remove the copy of i2f() in r600_blit_kms.c
We rename the function to something longer now that it is a global
symbol. This reduces the likelyhood of unintended clashes later.
This might be a candidate for inclusion inside general drm infrastructure.
However, at the moment only the radeon driver uses it.
Signed-off-by: Steven Fuerst <svfuerst at gmail.com>
---
drivers/gpu/drm/radeon/r600_blit.c | 66 ++++++++++++++--------------
drivers/gpu/drm/radeon/r600_blit_kms.c | 52 +++-------------------
drivers/gpu/drm/radeon/r600_blit_shaders.h | 1 +
3 files changed, 40 insertions(+), 79 deletions(-)
diff --git a/drivers/gpu/drm/radeon/r600_blit.c b/drivers/gpu/drm/radeon/r600_blit.c
index 3c031a4..ee1b815 100644
--- a/drivers/gpu/drm/radeon/r600_blit.c
+++ b/drivers/gpu/drm/radeon/r600_blit.c
@@ -489,7 +489,7 @@ set_default_state(drm_radeon_private_t *dev_priv)
ADVANCE_RING();
}
-static uint32_t i2f(uint32_t input)
+uint32_t int2float(uint32_t input)
{
u32 result, i, exponent, fraction;
@@ -632,20 +632,20 @@ r600_blit_copy(struct drm_device *dev,
vb = r600_nomm_get_vb_ptr(dev);
}
- vb[0] = i2f(dst_x);
+ vb[0] = int2float(dst_x);
vb[1] = 0;
- vb[2] = i2f(src_x);
+ vb[2] = int2float(src_x);
vb[3] = 0;
- vb[4] = i2f(dst_x);
- vb[5] = i2f(h);
- vb[6] = i2f(src_x);
- vb[7] = i2f(h);
+ vb[4] = int2float(dst_x);
+ vb[5] = int2float(h);
+ vb[6] = int2float(src_x);
+ vb[7] = int2float(h);
- vb[8] = i2f(dst_x + cur_size);
- vb[9] = i2f(h);
- vb[10] = i2f(src_x + cur_size);
- vb[11] = i2f(h);
+ vb[8] = int2float(dst_x + cur_size);
+ vb[9] = int2float(h);
+ vb[10] = int2float(src_x + cur_size);
+ vb[11] = int2float(h);
/* src */
set_tex_resource(dev_priv, FMT_8,
@@ -721,20 +721,20 @@ r600_blit_copy(struct drm_device *dev,
vb = r600_nomm_get_vb_ptr(dev);
}
- vb[0] = i2f(dst_x / 4);
+ vb[0] = int2float(dst_x / 4);
vb[1] = 0;
- vb[2] = i2f(src_x / 4);
+ vb[2] = int2float(src_x / 4);
vb[3] = 0;
- vb[4] = i2f(dst_x / 4);
- vb[5] = i2f(h);
- vb[6] = i2f(src_x / 4);
- vb[7] = i2f(h);
+ vb[4] = int2float(dst_x / 4);
+ vb[5] = int2float(h);
+ vb[6] = int2float(src_x / 4);
+ vb[7] = int2float(h);
- vb[8] = i2f((dst_x + cur_size) / 4);
- vb[9] = i2f(h);
- vb[10] = i2f((src_x + cur_size) / 4);
- vb[11] = i2f(h);
+ vb[8] = int2float((dst_x + cur_size) / 4);
+ vb[9] = int2float(h);
+ vb[10] = int2float((src_x + cur_size) / 4);
+ vb[11] = int2float(h);
/* src */
set_tex_resource(dev_priv, FMT_8_8_8_8,
@@ -804,20 +804,20 @@ r600_blit_swap(struct drm_device *dev,
dx2 = dx + w;
dy2 = dy + h;
- vb[0] = i2f(dx);
- vb[1] = i2f(dy);
- vb[2] = i2f(sx);
- vb[3] = i2f(sy);
+ vb[0] = int2float(dx);
+ vb[1] = int2float(dy);
+ vb[2] = int2float(sx);
+ vb[3] = int2float(sy);
- vb[4] = i2f(dx);
- vb[5] = i2f(dy2);
- vb[6] = i2f(sx);
- vb[7] = i2f(sy2);
+ vb[4] = int2float(dx);
+ vb[5] = int2float(dy2);
+ vb[6] = int2float(sx);
+ vb[7] = int2float(sy2);
- vb[8] = i2f(dx2);
- vb[9] = i2f(dy2);
- vb[10] = i2f(sx2);
- vb[11] = i2f(sy2);
+ vb[8] = int2float(dx2);
+ vb[9] = int2float(dy2);
+ vb[10] = int2float(sx2);
+ vb[11] = int2float(sy2);
switch(cpp) {
case 4:
diff --git a/drivers/gpu/drm/radeon/r600_blit_kms.c b/drivers/gpu/drm/radeon/r600_blit_kms.c
index 2bef854..1c7ed3a 100644
--- a/drivers/gpu/drm/radeon/r600_blit_kms.c
+++ b/drivers/gpu/drm/radeon/r600_blit_kms.c
@@ -455,46 +455,6 @@ set_default_state(struct radeon_device *rdev)
radeon_ring_write(ring, sq_stack_resource_mgmt_2);
}
-#define I2F_MAX_BITS 15
-#define I2F_MAX_INPUT ((1 << I2F_MAX_BITS) - 1)
-#define I2F_SHIFT (24 - I2F_MAX_BITS)
-
-/*
- * Converts unsigned integer into 32-bit IEEE floating point representation.
- * Conversion is not universal and only works for the range from 0
- * to 2^I2F_MAX_BITS-1. Currently we only use it with inputs between
- * 0 and 16384 (inclusive), so I2F_MAX_BITS=15 is enough. If necessary,
- * I2F_MAX_BITS can be increased, but that will add to the loop iterations
- * and slow us down. Conversion is done by shifting the input and counting
- * down until the first 1 reaches bit position 23. The resulting counter
- * and the shifted input are, respectively, the exponent and the fraction.
- * The sign is always zero.
- */
-static uint32_t i2f(uint32_t input)
-{
- u32 result, i, exponent, fraction;
-
- WARN_ON_ONCE(input > I2F_MAX_INPUT);
-
- if ((input & I2F_MAX_INPUT) == 0)
- result = 0;
- else {
- exponent = 126 + I2F_MAX_BITS;
- fraction = (input & I2F_MAX_INPUT) << I2F_SHIFT;
-
- for (i = 0; i < I2F_MAX_BITS; i++) {
- if (fraction & 0x800000)
- break;
- else {
- fraction = fraction << 1;
- exponent = exponent - 1;
- }
- }
- result = exponent << 23 | (fraction & 0x7fffff);
- }
- return result;
-}
-
int r600_blit_init(struct radeon_device *rdev)
{
u32 obj_size;
@@ -766,14 +726,14 @@ void r600_kms_blit_copy(struct radeon_device *rdev,
vb_cpu_addr[3] = 0;
vb_cpu_addr[4] = 0;
- vb_cpu_addr[5] = i2f(h);
+ vb_cpu_addr[5] = int2float(h);
vb_cpu_addr[6] = 0;
- vb_cpu_addr[7] = i2f(h);
+ vb_cpu_addr[7] = int2float(h);
- vb_cpu_addr[8] = i2f(w);
- vb_cpu_addr[9] = i2f(h);
- vb_cpu_addr[10] = i2f(w);
- vb_cpu_addr[11] = i2f(h);
+ vb_cpu_addr[8] = int2float(w);
+ vb_cpu_addr[9] = int2float(h);
+ vb_cpu_addr[10] = int2float(w);
+ vb_cpu_addr[11] = int2float(h);
rdev->r600_blit.primitives.set_tex_resource(rdev, FMT_8_8_8_8,
w, h, w, src_gpu_addr, size_in_bytes);
diff --git a/drivers/gpu/drm/radeon/r600_blit_shaders.h b/drivers/gpu/drm/radeon/r600_blit_shaders.h
index f437d36..e17c2cb 100644
--- a/drivers/gpu/drm/radeon/r600_blit_shaders.h
+++ b/drivers/gpu/drm/radeon/r600_blit_shaders.h
@@ -35,4 +35,5 @@ extern const u32 r6xx_default_state[];
extern const u32 r6xx_ps_size, r6xx_vs_size;
extern const u32 r6xx_default_size, r7xx_default_size;
+uint32_t int2float(uint32_t x);
#endif
--
1.7.10.4
More information about the dri-devel
mailing list