[PATCH RESEND] gpu/mfd/usb: Fix USB randconfig problems

[Guenter Roeck]

Fix config warning:

warning: ( ... && DRM_USB) selects USB which has unmet direct dependencies
(USB_SUPPORT && USB_ARCH_HAS_HCD)

and build error:
ERROR: "usb_speed_string" [drivers/usb/core/usbcore.ko] undefined!

by adding the missing dependency on USB_ARCH_HAS_HCD to DRM_UDL and DRM_USB.

This exposes:
drivers/video/Kconfig:36:error: recursive dependency detected!
drivers/video/Kconfig:36:       symbol FB is selected by DRM_KMS_HELPER
drivers/gpu/drm/Kconfig:28:     symbol DRM_KMS_HELPER is selected by DRM_UDL
drivers/gpu/drm/udl/Kconfig:1:  symbol DRM_UDL depends on USB_ARCH_HAS_HCD
drivers/usb/Kconfig:78: symbol USB_ARCH_HAS_HCD depends on USB_ARCH_HAS_OHCI
drivers/usb/Kconfig:16: symbol USB_ARCH_HAS_OHCI depends on I2C
drivers/i2c/Kconfig:5:  symbol I2C is selected by FB_DDC
drivers/video/Kconfig:86:       symbol FB_DDC is selected by FB_CYBER2000_DDC
drivers/video/Kconfig:385:      symbol FB_CYBER2000_DDC depends on FB_CYBER2000
drivers/video/Kconfig:373:      symbol FB_CYBER2000 depends on FB

which is due to drivers/usb/Kconfig:
config USB_ARCH_HAS_OHCI
	...
	default y if ARCH_PNX4008 && I2C

Fix by dropping I2C from the above dependency; logic is that this is not a
platform dependency but a configuration dependency: the _architecture_ still
supports USB even is I2C is not selected.

This exposes:
drivers/video/Kconfig:36:error: recursive dependency detected!
drivers/video/Kconfig:36:       symbol FB is selected by DRM_KMS_HELPER
drivers/gpu/drm/Kconfig:28:     symbol DRM_KMS_HELPER is selected by DRM_UDL
drivers/gpu/drm/udl/Kconfig:1:  symbol DRM_UDL depends on USB_ARCH_HAS_HCD
drivers/usb/Kconfig:78: symbol USB_ARCH_HAS_HCD depends on USB_ARCH_HAS_OHCI
drivers/usb/Kconfig:17: symbol USB_ARCH_HAS_OHCI depends on MFD_TC6393XB
drivers/mfd/Kconfig:396:        symbol MFD_TC6393XB depends on GPIOLIB
drivers/gpio/Kconfig:35:        symbol GPIOLIB is selected by FB_VIA
drivers/video/Kconfig:1560:     symbol FB_VIA depends on FB

which can be fixed by having MFD_TC6393XB select GPIOLIB instead of depending on
it.

Signed-off-by: Guenter Roeck <linux at roeck-us.net>
---
The USB build problem causes 15-20% of my randconfig builds to fail (6 of 36
failures last night).

I'll be happy to split the patch into three if it helps to get it accepted.

 drivers/gpu/drm/Kconfig     |    1 +
 drivers/gpu/drm/udl/Kconfig |    1 +
 drivers/mfd/Kconfig         |    3 ++-
 drivers/usb/Kconfig         |    2 +-
 4 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 23120c0..90e2808 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -22,6 +22,7 @@ menuconfig DRM
 config DRM_USB
 	tristate
 	depends on DRM
+	depends on USB_ARCH_HAS_HCD
 	select USB
 
 config DRM_KMS_HELPER
diff --git a/drivers/gpu/drm/udl/Kconfig b/drivers/gpu/drm/udl/Kconfig
index 0b5e096..56e0bf3 100644
--- a/drivers/gpu/drm/udl/Kconfig
+++ b/drivers/gpu/drm/udl/Kconfig
@@ -1,6 +1,7 @@
 config DRM_UDL
 	tristate "DisplayLink"
 	depends on DRM && EXPERIMENTAL
+	depends on USB_ARCH_HAS_HCD
 	select DRM_USB
 	select FB_SYS_FILLRECT
 	select FB_SYS_COPYAREA
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index d1facef..b1a1462 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -395,7 +395,8 @@ config MFD_TC6387XB
 
 config MFD_TC6393XB
 	bool "Support Toshiba TC6393XB"
-	depends on GPIOLIB && ARM && HAVE_CLK
+	depends on ARM && HAVE_CLK
+	select GPIOLIB
 	select MFD_CORE
 	select MFD_TMIO
 	help
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index a7773a3..7065df6 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -13,7 +13,7 @@ config USB_ARCH_HAS_OHCI
 	default y if PXA3xx
 	default y if ARCH_EP93XX
 	default y if ARCH_AT91
-	default y if ARCH_PNX4008 && I2C
+	default y if ARCH_PNX4008
 	default y if MFD_TC6393XB
 	default y if ARCH_W90X900
 	default y if ARCH_DAVINCI_DA8XX
-- 
1.7.9.7