[PATCH V4] drm: edid: add support for E-DDC
Ville Syrjälä
ville.syrjala at linux.intel.com
Wed Aug 29 04:08:44 PDT 2012
On Sat, Aug 25, 2012 at 03:13:56PM +0530, Shirish S wrote:
> The current logic for probing ddc is limited to
> 2 blocks (256 bytes), this patch adds support
> for the 4 block (512) data.
>
> To do this, a single 8-bit segment index is
> passed to the display via the I2C address 30h.
> Data from the selected segment is then immediately
> read via the regular DDC2 address using a repeated
> I2C 'START' signal.
>
> Signed-off-by: Shirish S <s.shirish at samsung.com>
> ---
> drivers/gpu/drm/drm_edid.c | 22 ++++++++++++++++++----
> 1 files changed, 18 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> index a8743c3..cde7af0 100644
> --- a/drivers/gpu/drm/drm_edid.c
> +++ b/drivers/gpu/drm/drm_edid.c
> @@ -254,6 +254,8 @@ drm_do_probe_ddc_edid(struct i2c_adapter *adapter, unsigned char *buf,
> int block, int len)
> {
> unsigned char start = block * EDID_LENGTH;
> + unsigned char segment = block >> 1;
> + unsigned char xfers = segment ? 3 : 2;
> int ret, retries = 5;
>
> /* The core i2c driver will automatically retry the transfer if the
> @@ -264,7 +266,12 @@ drm_do_probe_ddc_edid(struct i2c_adapter *adapter, unsigned char *buf,
> */
> do {
> struct i2c_msg msgs[] = {
> - {
> + { /*set segment pointer */
Missing whitespace after '/*'. Perhaps just drop the comment. I don't
see much value in it.
> + .addr = DDC_SEGMENT_ADDR,
> + .flags = segment ? 0 : I2C_M_IGNORE_NAK,
> + .len = 1,
> + .buf = &segment,
> + }, {
> .addr = DDC_ADDR,
> .flags = 0,
> .len = 1,
> @@ -276,15 +283,22 @@ drm_do_probe_ddc_edid(struct i2c_adapter *adapter, unsigned char *buf,
> .buf = buf,
> }
> };
> - ret = i2c_transfer(adapter, msgs, 2);
> + /* Avoid sending the segment addr to not upset non-compliant ddc
> + * monitors.
> + */
Wrong indentation and comment style is wrong. I'm guessing this didn't go
through checkpatch.pl.
Otherwise looks OK to me.
--
Ville Syrjälä
Intel OTC
More information about the dri-devel
mailing list