[PATCH V5] drm: edid: add support for E-DDC

Daniel Vetter daniel at ffwll.ch
Wed Aug 29 09:12:46 PDT 2012


On Wed, Aug 29, 2012 at 4:46 PM, Shirish S <s.shirish at samsung.com> wrote:
> The current logic for probing ddc is limited to
> 2 blocks (256 bytes), this patch adds support
> for the 4 block (512) data.
>
> To do this, a single 8-bit segment index is
> passed to the display via the I2C address 30h.
> Data from the selected segment is then immediately
> read via the regular DDC2 address using a repeated
> I2C 'START' signal.
>
> Signed-off-by: Shirish S <s.shirish at samsung.com>

If you resend patches it'd be nice to keep a changelog of the patch
itself somewhere, otherwise it's just more work to figure that out for
reviewers. Also, you can usually attach reviewed-by tags (like mine)
to a patch resend if you don't change the patch massively ...
-Daniel

> ---
>  drivers/gpu/drm/drm_edid.c |   22 +++++++++++++++++++---
>  1 files changed, 19 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> index bcc4725..b9ffc30 100644
> --- a/drivers/gpu/drm/drm_edid.c
> +++ b/drivers/gpu/drm/drm_edid.c
> @@ -254,6 +254,8 @@ drm_do_probe_ddc_edid(struct i2c_adapter *adapter, unsigned char *buf,
>                       int block, int len)
>  {
>         unsigned char start = block * EDID_LENGTH;
> +       unsigned char segment = block >> 1;
> +       unsigned char xfers = segment ? 3 : 2;
>         int ret, retries = 5;
>
>         /* The core i2c driver will automatically retry the transfer if the
> @@ -265,6 +267,11 @@ drm_do_probe_ddc_edid(struct i2c_adapter *adapter, unsigned char *buf,
>         do {
>                 struct i2c_msg msgs[] = {
>                         {
> +                               .addr   = DDC_SEGMENT_ADDR,
> +                               .flags  = segment ? 0 : I2C_M_IGNORE_NAK,
> +                               .len    = 1,
> +                               .buf    = &segment,
> +                       }, {
>                                 .addr   = DDC_ADDR,
>                                 .flags  = 0,
>                                 .len    = 1,
> @@ -276,15 +283,24 @@ drm_do_probe_ddc_edid(struct i2c_adapter *adapter, unsigned char *buf,
>                                 .buf    = buf,
>                         }
>                 };
> -               ret = i2c_transfer(adapter, msgs, 2);
> +
> +       /*
> +        * Avoid sending the segment addr to not upset non-compliant ddc
> +        * monitors.
> +        */
> +               if (!segment)
> +                       ret = i2c_transfer(adapter, &msgs[1], xfers);
> +               else
> +                       ret = i2c_transfer(adapter, msgs, xfers);
> +
>                 if (ret == -ENXIO) {
>                         DRM_DEBUG_KMS("drm: skipping non-existent adapter %s\n",
>                                         adapter->name);
>                         break;
>                 }
> -       } while (ret != 2 && --retries);
> +       } while (ret != xfers && --retries);
>
> -       return ret == 2 ? 0 : -1;
> +       return ret == xfers ? 0 : -1;
>  }
>
>  static bool drm_edid_is_zero(u8 *in_edid, int length)
> --
> 1.7.0.4
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel



-- 
Daniel Vetter
daniel.vetter at ffwll.ch - +41 (0) 79 364 57 48 - http://blog.ffwll.ch


More information about the dri-devel mailing list