[RFC v3 5/5] drm/exynos: add gsc ipp driver
Eunchul Kim
chulspro.kim at samsung.com
Thu Dec 13 21:29:35 PST 2012
Thank's for your comment.
please check my answer.
BR
Eunchul Kim
On 12/13/2012 11:29 AM, Joonyoung Shim wrote:
> Hi,
>
> I can't review about logic of driver because i don't know well but i
> feel there are too many checking codes and unused or big size defines.
- I think error handling need. and What is unused defines ?
What is big size define ? you mean the coefficient value ?
> Please refer v4l2 exynos gsc driver in drivers/media/platform/exynos-gsc/.
- I will check exynos gsc.
>
> This v3 patch seems to add many codes than v2. Please write changelog in
> future.
- Thank's I don't have a lot of experience about posting.
> Even if line is short, many lines are split to two lines. Please check
> it overall.
- PATCH description ?
>
> Thanks.
>
> On 12/12/2012 04:34 PM, Eunchul Kim wrote:
>> GSC is stand for General SCaler and supports supports
>
> supports supports
- Thank's, done.
>
>> image scaler/rotator/crop/flip/csc and input/output DMA operations.
>> input DMA reads image data from the memory.
>> output DMA writes image data to memory.
>> GSC supports image rotation and imag effect functions.
>
> s/imag/image
- done.
>
>> also supports writeback and display output operations.
>
> There are to begin a new line unnecessarily. Could you rewrite
> detailedly how this driver operates?
- What kind of ? writeback ? output operation ?
>
>>
>> Signed-off-by: Eunchul Kim <chulspro.kim at samsung.com>
>> Signed-off-by: Jinyoung Jeon <jy0.jeon at samsung.com>
>> ---
>> drivers/gpu/drm/exynos/Kconfig | 5 +
>> drivers/gpu/drm/exynos/Makefile | 1 +
>> drivers/gpu/drm/exynos/exynos_drm_drv.c | 15 +
>> drivers/gpu/drm/exynos/exynos_drm_drv.h | 1 +
>> drivers/gpu/drm/exynos/exynos_drm_gsc.c | 1927
>> +++++++++++++++++++++++++++++++
>> drivers/gpu/drm/exynos/exynos_drm_gsc.h | 34 +
>> drivers/gpu/drm/exynos/regs-gsc.h | 295 +++++
>> 7 files changed, 2278 insertions(+), 0 deletions(-)
>> create mode 100644 drivers/gpu/drm/exynos/exynos_drm_gsc.c
>> create mode 100644 drivers/gpu/drm/exynos/exynos_drm_gsc.h
>> create mode 100644 drivers/gpu/drm/exynos/regs-gsc.h
>>
>> diff --git a/drivers/gpu/drm/exynos/Kconfig
>> b/drivers/gpu/drm/exynos/Kconfig
>> index 4860835..c93d776 100644
>> --- a/drivers/gpu/drm/exynos/Kconfig
>> +++ b/drivers/gpu/drm/exynos/Kconfig
>> @@ -64,3 +64,8 @@ config DRM_EXYNOS_ROTATOR
>> help
>> Choose this option if you want to use Exynos Rotator for DRM.
>> +config DRM_EXYNOS_GSC
>> + bool "Exynos DRM GSC"
>> + depends on DRM_EXYNOS_IPP && ARCH_EXYNOS5
>> + help
>> + Choose this option if you want to use Exynos GSC for DRM.
>> diff --git a/drivers/gpu/drm/exynos/Makefile
>> b/drivers/gpu/drm/exynos/Makefile
>> index 3b70668..639b49e 100644
>> --- a/drivers/gpu/drm/exynos/Makefile
>> +++ b/drivers/gpu/drm/exynos/Makefile
>> @@ -19,5 +19,6 @@ exynosdrm-$(CONFIG_DRM_EXYNOS_G2D) +=
>> exynos_drm_g2d.o
>> exynosdrm-$(CONFIG_DRM_EXYNOS_IPP) += exynos_drm_ipp.o
>> exynosdrm-$(CONFIG_DRM_EXYNOS_FIMC) += exynos_drm_fimc.o
>> exynosdrm-$(CONFIG_DRM_EXYNOS_ROTATOR) += exynos_drm_rotator.o
>> +exynosdrm-$(CONFIG_DRM_EXYNOS_GSC) += exynos_drm_gsc.o
>> obj-$(CONFIG_DRM_EXYNOS) += exynosdrm.o
>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c
>> b/drivers/gpu/drm/exynos/exynos_drm_drv.c
>> index 09d884b..e0a8e80 100644
>> --- a/drivers/gpu/drm/exynos/exynos_drm_drv.c
>> +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c
>> @@ -384,6 +384,12 @@ static int __init exynos_drm_init(void)
>> goto out_rotator;
>> #endif
>> +#ifdef CONFIG_DRM_EXYNOS_GSC
>> + ret = platform_driver_register(&gsc_driver);
>> + if (ret < 0)
>> + goto out_gsc;
>> +#endif
>> +
>> #ifdef CONFIG_DRM_EXYNOS_IPP
>> ret = platform_driver_register(&ipp_driver);
>> if (ret < 0)
>> @@ -412,6 +418,11 @@ out_drm:
>> out_ipp:
>> #endif
>> +#ifdef CONFIG_DRM_EXYNOS_GSC
>> + platform_driver_unregister(&gsc_driver);
>> +out_gsc:
>> +#endif
>> +
>> #ifdef CONFIG_DRM_EXYNOS_ROTATOR
>> platform_driver_unregister(&rotator_driver);
>> out_rotator:
>> @@ -462,6 +473,10 @@ static void __exit exynos_drm_exit(void)
>> platform_driver_unregister(&ipp_driver);
>> #endif
>> +#ifdef CONFIG_DRM_EXYNOS_GSC
>> + platform_driver_unregister(&gsc_driver);
>> +#endif
>> +
>> #ifdef CONFIG_DRM_EXYNOS_ROTATOR
>> platform_driver_unregister(&rotator_driver);
>> #endif
>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h
>> b/drivers/gpu/drm/exynos/exynos_drm_drv.h
>> index a74e37c..afe556c 100644
>> --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h
>> +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h
>> @@ -354,5 +354,6 @@ extern struct platform_driver vidi_driver;
>> extern struct platform_driver g2d_driver;
>> extern struct platform_driver fimc_driver;
>> extern struct platform_driver rotator_driver;
>> +extern struct platform_driver gsc_driver;
>> extern struct platform_driver ipp_driver;
>> #endif
>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_gsc.c
>> b/drivers/gpu/drm/exynos/exynos_drm_gsc.c
>> new file mode 100644
>> index 0000000..a4475b0
>> --- /dev/null
>> +++ b/drivers/gpu/drm/exynos/exynos_drm_gsc.c
>> @@ -0,0 +1,1927 @@
>> +/*
>> + * Copyright (C) 2012 Samsung Electronics Co.Ltd
>> + * Authors:
>> + * Eunchul Kim <chulspro.kim at samsung.com>
>> + * Jinyoung Jeon <jy0.jeon at samsung.com>
>> + * Sangmin Lee <lsmin.lee at samsung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or
>> modify it
>> + * under the terms of the GNU General Public License as published
>> by the
>> + * Free Software Foundation; either version 2 of the License, or
>> (at your
>> + * option) any later version.
>> + *
>> + */
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/clk.h>
>> +#include <linux/pm_runtime.h>
>> +#include <plat/map-base.h>
>> +
>> +#include <drm/drmP.h>
>> +#include <drm/exynos_drm.h>
>> +#include "regs-gsc.h"
>> +#include "exynos_drm_ipp.h"
>> +#include "exynos_drm_gsc.h"
>> +
>> +/*
>> + * GSC is stand for General SCaler and
>> + * supports image scaler/rotator and input/output DMA operations.
>> + * input DMA reads image data from the memory.
>> + * output DMA writes image data to memory.
>> + * GSC supports image rotation and image effect functions.
>> + */
>
> Please see my comments about commit description.
- operation description ?
>
>> +
>> +#define GSC_MAX_DEVS 4
>> +#define GSC_MAX_SRC 4
>> +#define GSC_MAX_DST 16
>> +#define GSC_RESET_TIMEOUT 50
>> +#define GSC_BUF_STOP 1
>> +#define GSC_BUF_START 2
>> +#define GSC_REG_SZ 16
>> +#define GSC_WIDTH_ITU_709 1280
>> +#define GSC_SC_UP_MAX_RATIO 65536
>> +#define GSC_SC_DOWN_RATIO_7_8 74898
>> +#define GSC_SC_DOWN_RATIO_6_8 87381
>> +#define GSC_SC_DOWN_RATIO_5_8 104857
>> +#define GSC_SC_DOWN_RATIO_4_8 131072
>> +#define GSC_SC_DOWN_RATIO_3_8 174762
>> +#define GSC_SC_DOWN_RATIO_2_8 262144
>> +#define GSC_REFRESH_MIN 12
>> +#define GSC_REFRESH_MAX 60
>> +#define GSC_CROP_MAX 8192
>> +#define GSC_CROP_MIN 32
>> +#define GSC_SCALE_MAX 4224
>> +#define GSC_SCALE_MIN 32
>> +
>> +#define get_gsc_context(dev)
>> platform_get_drvdata(to_platform_device(dev))
>> +#define get_ctx_from_ippdrv(ippdrv) container_of(ippdrv,\
>> + struct gsc_context, ippdrv);
>> +#define gsc_read(offset) readl(ctx->regs + (offset))
>> +#define gsc_write(cfg, offset) writel(cfg, ctx->regs + (offset))
>> +
>> +/*
>> + * A structure of scaler.
>> + *
>> + * @range: narrow, wide.
>> + * @pre_shfactor: pre sclaer shift factor.
>> + * @pre_hratio: horizontal ratio of the prescaler.
>> + * @pre_vratio: vertical ratio of the prescaler.
>> + * @main_hratio: the main scaler's horizontal ratio.
>> + * @main_vratio: the main scaler's vertical ratio.
>> + */
>> +struct gsc_scaler {
>> + bool range;
>> + u32 pre_shfactor;
>> + u32 pre_hratio;
>> + u32 pre_vratio;
>> + unsigned long main_hratio;
>> + unsigned long main_vratio;
>> +};
>> +
>> +/*
>> + * A structure of scaler capability.
>> + *
>> + * find user manual 49.2 features.
>> + * @tile_w: tile mode or rotation width.
>> + * @tile_h: tile mode or rotation height.
>> + * @w: other cases width.
>> + * @h: other cases height.
>> + */
>> +struct gsc_capability {
>> + /* tile or rotation */
>> + u32 tile_w;
>> + u32 tile_h;
>> + /* other cases */
>> + u32 w;
>> + u32 h;
>> +};
>> +
>> +/*
>> + * A structure of gsc context.
>> + *
>> + * @ippdrv: prepare initialization using ippdrv.
>> + * @regs_res: register resources.
>> + * @regs: memory mapped io registers.
>> + * @lock: locking of operations.
>> + * @gsc_clk: gsc gate clock.
>> + * @parent_clk: parent clock e.g aclk_300.
>> + * @child_clk: child clock e.g dout_aclk_300.
>> + * @sc: scaler infomations.
>> + * @id: gsc id.
>> + * @irq: irq number.
>> + * @rotation: supports rotation of src.
>> + * @suspended: qos operations.
>> + */
>> +struct gsc_context {
>> + struct exynos_drm_ippdrv ippdrv;
>> + struct resource *regs_res;
>> + void __iomem *regs;
>> + struct mutex lock;
>> + struct clk *gsc_clk;
>> + struct clk *parent_clk;
>> + struct clk *child_clk;
>> + struct gsc_scaler sc;
>> + int id;
>> + int irq;
>> + bool rotation;
>> + bool suspended;
>> +};
>> +
>> +/* 8-tap Filter Coefficient */
>> +const int h_coef_8t[7][16][8] = {
>
> static? and it is unnecessary to be size of array.
- static OK. if remove size, build error.
what do you want ?
>
>> + { /* Ratio <= 65536 (~8:8) */
>> + { 0, 0, 0, 128, 0, 0, 0, 0 },/* 0 */
>> + { -1, 2, -6, 127, 7, -2, 1, 0 },/* 1 */
>> + { -1, 4, -12, 125, 16, -5, 1, 0 },/* 2 */
>> + { -1, 5, -15, 120, 25, -8, 2, 0 },/* 3 */
>> + { -1, 6, -18, 114, 35, -10, 3, -1 },/* 4 */
>> + { -1, 6, -20, 107, 46, -13, 4, -1 },/* 5 */
>> + { -2, 7, -21, 99, 57, -16, 5, -1 },/* 6 */
>> + { -1, 6, -20, 89, 68, -18, 5, -1 },/* 7 */
>> + { -1, 6, -20, 79, 79, -20, 6, -1 },/* 8 */
>> + { -1, 5, -18, 68, 89, -20, 6, -1 },/* 9 */
>> + { -1, 5, -16, 57, 99, -21, 7, -2 },/* 10 */
>> + { -1, 4, -13, 46, 107, -20, 6, -1 },/* 11 */
>> + { -1, 3, -10, 35, 114, -18, 6, -1 },/* 12 */
>> + { 0, 2, -8, 25, 120, -15, 5, -1 },/* 13 */
>> + { 0, 1, -5, 16, 125, -12, 4, -1 },/* 14 */
>> + { 0, 1, -2, 7, 127, -6, 2, -1 } /* 15 */
>
> The comments for index seem unnecessary.
- done.
>
>> + }, { /* 65536 < Ratio <= 74898 (~8:7) */
>> + { 3, -8, 14, 111, 13, -8, 3, 0 },/* 0 */
>> + { 2, -6, 7, 112, 21, -10, 3, -1 },/* 1 */
>> + { 2, -4, 1, 110, 28, -12, 4, -1 },/* 2 */
>> + { 1, -2, -3, 106, 36, -13, 4, -1 },/* 3 */
>> + { 1, -1, -7, 103, 44, -15, 4, -1 },/* 4 */
>> + { 1, 1, -11, 97, 53, -16, 4, -1 },/* 5 */
>> + { 0, 2, -13, 91, 61, -16, 4, -1 },/* 6 */
>> + { 0, 3, -15, 85, 69, -17, 4, -1 },/* 7 */
>> + { 0, 3, -16, 77, 77, -16, 3, 0 },/* 8 */
>> + { -1, 4, -17, 69, 85, -15, 3, 0 },/* 9 */
>> + { -1, 4, -16, 61, 91, -13, 2, 0 },/* 10 */
>> + { -1, 4, -16, 53, 97, -11, 1, 1 },/* 11 */
>> + { -1, 4, -15, 44, 103, -7, -1, 1 },/* 12 */
>> + { -1, 4, -13, 36, 106, -3, -2, 1 },/* 13 */
>> + { -1, 4, -12, 28, 110, 1, -4, 2 },/* 14 */
>> + { -1, 3, -10, 21, 112, 7, -6, 2 } /* 15 */
>> + }, { /* 74898 < Ratio <= 87381 (~8:6) */
>> + { 2, -11, 25, 96, 25, -11, 2, 0 },/* 0 */
>> + { 2, -10, 19, 96, 31, -12, 2, 0 },/* 1 */
>> + { 2, -9, 14, 94, 37, -12, 2, 0 },/* 2 */
>> + { 2, -8, 10, 92, 43, -12, 1, 0 },/* 3 */
>> + { 2, -7, 5, 90, 49, -12, 1, 0 },/* 4 */
>> + { 2, -5, 1, 86, 55, -12, 0, 1 },/* 5 */
>> + { 2, -4, -2, 82, 61, -11, -1, 1 },/* 6 */
>> + { 1, -3, -5, 77, 67, -9, -1, 1 },/* 7 */
>> + { 1, -2, -7, 72, 72, -7, -2, 1 },/* 8 */
>> + { 1, -1, -9, 67, 77, -5, -3, 1 },/* 9 */
>> + { 1, -1, -11, 61, 82, -2, -4, 2 },/* 10 */
>> + { 1, 0, -12, 55, 86, 1, -5, 2 },/* 11 */
>> + { 0, 1, -12, 49, 90, 5, -7, 2 },/* 12 */
>> + { 0, 1, -12, 43, 92, 10, -8, 2 },/* 13 */
>> + { 0, 2, -12, 37, 94, 14, -9, 2 },/* 14 */
>> + { 0, 2, -12, 31, 96, 19, -10, 2 } /* 15 */
>> + }, { /* 87381 < Ratio <= 104857 (~8:5) */
>> + { -1, -8, 33, 80, 33, -8, -1, 0 },/* 0 */
>> + { -1, -8, 28, 80, 37, -7, -2, 1 },/* 1 */
>> + { 0, -8, 24, 79, 41, -7, -2, 1 },/* 2 */
>> + { 0, -8, 20, 78, 46, -6, -3, 1 },/* 3 */
>> + { 0, -8, 16, 76, 50, -4, -3, 1 },/* 4 */
>> + { 0, -7, 13, 74, 54, -3, -4, 1 },/* 5 */
>> + { 1, -7, 10, 71, 58, -1, -5, 1 },/* 6 */
>> + { 1, -6, 6, 68, 62, 1, -5, 1 },/* 7 */
>> + { 1, -6, 4, 65, 65, 4, -6, 1 },/* 8 */
>> + { 1, -5, 1, 62, 68, 6, -6, 1 },/* 9 */
>> + { 1, -5, -1, 58, 71, 10, -7, 1 },/* 10 */
>> + { 1, -4, -3, 54, 74, 13, -7, 0 },/* 11 */
>> + { 1, -3, -4, 50, 76, 16, -8, 0 },/* 12 */
>> + { 1, -3, -6, 46, 78, 20, -8, 0 },/* 13 */
>> + { 1, -2, -7, 41, 79, 24, -8, 0 },/* 14 */
>> + { 1, -2, -7, 37, 80, 28, -8, -1 } /* 15 */
>> + }, { /* 104857 < Ratio <= 131072 (~8:4) */
>> + { -3, 0, 35, 64, 35, 0, -3, 0 },/* 0 */
>> + { -3, -1, 32, 64, 38, 1, -3, 0 },/* 1 */
>> + { -2, -2, 29, 63, 41, 2, -3, 0 },/* 2 */
>> + { -2, -3, 27, 63, 43, 4, -4, 0 },/* 3 */
>> + { -2, -3, 24, 61, 46, 6, -4, 0 },/* 4 */
>> + { -2, -3, 21, 60, 49, 7, -4, 0 },/* 5 */
>> + { -1, -4, 19, 59, 51, 9, -4, -1 },/* 6 */
>> + { -1, -4, 16, 57, 53, 12, -4, -1 },/* 7 */
>> + { -1, -4, 14, 55, 55, 14, -4, -1 },/* 8 */
>> + { -1, -4, 12, 53, 57, 16, -4, -1 },/* 9 */
>> + { -1, -4, 9, 51, 59, 19, -4, -1 },/* 10 */
>> + { 0, -4, 7, 49, 60, 21, -3, -2 },/* 11 */
>> + { 0, -4, 6, 46, 61, 24, -3, -2 },/* 12 */
>> + { 0, -4, 4, 43, 63, 27, -3, -2 },/* 13 */
>> + { 0, -3, 2, 41, 63, 29, -2, -2 },/* 14 */
>> + { 0, -3, 1, 38, 64, 32, -1, -3 } /* 15 */
>> + }, { /* 131072 < Ratio <= 174762 (~8:3) */
>> + { -1, 8, 33, 48, 33, 8, -1, 0 },/* 0 */
>> + { -1, 7, 31, 49, 35, 9, -1, -1 },/* 1 */
>> + { -1, 6, 30, 49, 36, 10, -1, -1 },/* 2 */
>> + { -1, 5, 28, 48, 38, 12, -1, -1 },/* 3 */
>> + { -1, 4, 26, 48, 39, 13, 0, -1 },/* 4 */
>> + { -1, 3, 24, 47, 41, 15, 0, -1 },/* 5 */
>> + { -1, 2, 23, 47, 42, 16, 0, -1 },/* 6 */
>> + { -1, 2, 21, 45, 43, 18, 1, -1 },/* 7 */
>> + { -1, 1, 19, 45, 45, 19, 1, -1 },/* 8 */
>> + { -1, 1, 18, 43, 45, 21, 2, -1 },/* 9 */
>> + { -1, 0, 16, 42, 47, 23, 2, -1 },/* 10 */
>> + { -1, 0, 15, 41, 47, 24, 3, -1 },/* 11 */
>> + { -1, 0, 13, 39, 48, 26, 4, -1 },/* 12 */
>> + { -1, -1, 12, 38, 48, 28, 5, -1 },/* 13 */
>> + { -1, -1, 10, 36, 49, 30, 6, -1 },/* 14 */
>> + { -1, -1, 9, 35, 49, 31, 7, -1 } /* 15 */
>> + }, { /* 174762 < Ratio <= 262144 (~8:2) */
>> + { 2, 13, 30, 38, 30, 13, 2, 0 },/* 0 */
>> + { 2, 12, 29, 38, 30, 14, 3, 0 },/* 1 */
>> + { 2, 11, 28, 38, 31, 15, 3, 0 },/* 2 */
>> + { 2, 10, 26, 38, 32, 16, 4, 0 },/* 3 */
>> + { 1, 10, 26, 37, 33, 17, 4, 0 },/* 4 */
>> + { 1, 9, 24, 37, 34, 18, 5, 0 },/* 5 */
>> + { 1, 8, 24, 37, 34, 19, 5, 0 },/* 6 */
>> + { 1, 7, 22, 36, 35, 20, 6, 1 },/* 7 */
>> + { 1, 6, 21, 36, 36, 21, 6, 1 },/* 8 */
>> + { 1, 6, 20, 35, 36, 22, 7, 1 },/* 9 */
>> + { 0, 5, 19, 34, 37, 24, 8, 1 },/* 10 */
>> + { 0, 5, 18, 34, 37, 24, 9, 1 },/* 11 */
>> + { 0, 4, 17, 33, 37, 26, 10, 1 },/* 12 */
>> + { 0, 4, 16, 32, 38, 26, 10, 2 },/* 13 */
>> + { 0, 3, 15, 31, 38, 28, 11, 2 },/* 14 */
>> + { 0, 3, 14, 30, 38, 29, 12, 2 } /* 15 */
>> + }
>> +};
>> +
>> +/* 4-tap Filter Coefficient */
>> +const int v_coef_4t[7][16][4] = {
>> + { /* Ratio <= 65536 (~8:8) */
>> + { 0, 128, 0, 0 },/* 0 */
>> + { -4, 127, 5, 0 },/* 1 */
>> + { -6, 124, 11, -1 },/* 2 */
>> + { -8, 118, 19, -1 },/* 3 */
>> + { -8, 111, 27, -2 },/* 4 */
>> + { -8, 102, 37, -3 },/* 5 */
>> + { -8, 92, 48, -4 },/* 6 */
>> + { -7, 81, 59, -5 },/* 7 */
>> + { -6, 70, 70, -6 },/* 8 */
>> + { -5, 59, 81, -7 },/* 9 */
>> + { -4, 48, 92, -8 },/* 10 */
>> + { -3, 37, 102, -8 },/* 11 */
>> + { -2, 27, 111, -8 },/* 12 */
>> + { -1, 19, 118, -8 },/* 13 */
>> + { -1, 11, 124, -6 },/* 14 */
>> + { 0, 5, 127, -4 } /* 15 */
>> + }, { /* 65536 < Ratio <= 74898 (~8:7) */
>> + { 8, 112, 8, 0 },/* 0 */
>> + { 4, 111, 14, -1 },/* 1 */
>> + { 1, 109, 20, -2 },/* 2 */
>> + { -2, 105, 27, -2 },/* 3 */
>> + { -3, 100, 34, -3 },/* 4 */
>> + { -5, 93, 43, -3 },/* 5 */
>> + { -5, 86, 51, -4 },/* 6 */
>> + { -5, 77, 60, -4 },/* 7 */
>> + { -5, 69, 69, -5 },/* 8 */
>> + { -4, 60, 77, -5 },/* 9 */
>> + { -4, 51, 86, -5 },/* 10 */
>> + { -3, 43, 93, -5 },/* 11 */
>> + { -3, 34, 100, -3 },/* 12 */
>> + { -2, 27, 105, -2 },/* 13 */
>> + { -2, 20, 109, 1 },/* 14 */
>> + { -1, 14, 111, 4 } /* 15 */
>> + }, { /* 74898 < Ratio <= 87381 (~8:6) */
>> + { 16, 96, 16, 0 },/* 0 */
>> + { 12, 97, 21, -2 },/* 1 */
>> + { 8, 96, 26, -2 },/* 2 */
>> + { 5, 93, 32, -2 },/* 3 */
>> + { 2, 89, 39, -2 },/* 4 */
>> + { 0, 84, 46, -2 },/* 5 */
>> + { -1, 79, 53, -3 },/* 6 */
>> + { -2, 73, 59, -2 },/* 7 */
>> + { -2, 66, 66, -2 },/* 8 */
>> + { -2, 59, 73, -2 },/* 9 */
>> + { -3, 53, 79, -1 },/* 10 */
>> + { -2, 46, 84, 0 },/* 11 */
>> + { -2, 39, 89, 2 },/* 12 */
>> + { -2, 32, 93, 5 },/* 13 */
>> + { -2, 26, 96, 8 },/* 14 */
>> + { -2, 21, 97, 12 } /* 15 */
>> + }, { /* 87381 < Ratio <= 104857 (~8:5) */
>> + { 22, 84, 22, 0 },/* 0 */
>> + { 18, 85, 26, -1 },/* 1 */
>> + { 14, 84, 31, -1 },/* 2 */
>> + { 11, 82, 36, -1 },/* 3 */
>> + { 8, 79, 42, -1 },/* 4 */
>> + { 6, 76, 47, -1 },/* 5 */
>> + { 4, 72, 52, 0 },/* 6 */
>> + { 2, 68, 58, 0 },/* 7 */
>> + { 1, 63, 63, 1 },/* 8 */
>> + { 0, 58, 68, 2 },/* 9 */
>> + { 0, 52, 72, 4 },/* 10 */
>> + { -1, 47, 76, 6 },/* 11 */
>> + { -1, 42, 79, 8 },/* 12 */
>> + { -1, 36, 82, 11 },/* 13 */
>> + { -1, 31, 84, 14 },/* 14 */
>> + { -1, 26, 85, 18 } /* 15 */
>> + }, { /* 104857 < Ratio <= 131072 (~8:4) */
>> + { 26, 76, 26, 0 },/* 0 */
>> + { 22, 76, 30, 0 },/* 1 */
>> + { 19, 75, 34, 0 },/* 2 */
>> + { 16, 73, 38, 1 },/* 3 */
>> + { 13, 71, 43, 1 },/* 4 */
>> + { 10, 69, 47, 2 },/* 5 */
>> + { 8, 66, 51, 3 },/* 6 */
>> + { 6, 63, 55, 4 },/* 7 */
>> + { 5, 59, 59, 5 },/* 8 */
>> + { 4, 55, 63, 6 },/* 9 */
>> + { 3, 51, 66, 8 },/* 10 */
>> + { 2, 47, 69, 10 },/* 11 */
>> + { 1, 43, 71, 13 },/* 12 */
>> + { 1, 38, 73, 16 },/* 13 */
>> + { 0, 34, 75, 19 },/* 14 */
>> + { 0, 30, 76, 22 } /* 15 */
>> + }, { /* 131072 < Ratio <= 174762 (~8:3) */
>> + { 29, 70, 29, 0 },/* 0 */
>> + { 26, 68, 32, 2 },/* 1 */
>> + { 23, 67, 36, 2 },/* 2 */
>> + { 20, 66, 39, 3 },/* 3 */
>> + { 17, 65, 43, 3 },/* 4 */
>> + { 15, 63, 46, 4 },/* 5 */
>> + { 12, 61, 50, 5 },/* 6 */
>> + { 10, 58, 53, 7 },/* 7 */
>> + { 8, 56, 56, 8 },/* 8 */
>> + { 7, 53, 58, 10 },/* 9 */
>> + { 5, 50, 61, 12 },/* 10 */
>> + { 4, 46, 63, 15 },/* 11 */
>> + { 3, 43, 65, 17 },/* 12 */
>> + { 3, 39, 66, 20 },/* 13 */
>> + { 2, 36, 67, 23 },/* 14 */
>> + { 2, 32, 68, 26 } /* 15 */
>> + }, { /* 174762 < Ratio <= 262144 (~8:2) */
>> + { 32, 64, 32, 0 },/* 0 */
>> + { 28, 63, 34, 3 },/* 1 */
>> + { 25, 62, 37, 4 },/* 2 */
>> + { 22, 62, 40, 4 },/* 3 */
>> + { 19, 61, 43, 5 },/* 4 */
>> + { 17, 59, 46, 6 },/* 5 */
>> + { 15, 58, 48, 7 },/* 6 */
>> + { 13, 55, 51, 9 },/* 7 */
>> + { 11, 53, 53, 11 },/* 8 */
>> + { 9, 51, 55, 13 },/* 9 */
>> + { 7, 48, 58, 15 },/* 10 */
>> + { 6, 46, 59, 17 },/* 11 */
>> + { 5, 43, 61, 19 },/* 12 */
>> + { 4, 40, 62, 22 },/* 13 */
>> + { 4, 37, 62, 25 },/* 14 */
>> + { 3, 34, 63, 28 } /* 15 */
>> + }
>> +};
>> +
>> +static int gsc_sw_reset(struct gsc_context *ctx)
>> +{
>> + u32 cfg;
>> + int count = GSC_RESET_TIMEOUT;
>> +
>> + DRM_DEBUG_KMS("%s\n", __func__);
>> +
>> + /* s/w reset */
>> + cfg = (GSC_SW_RESET_SRESET);
>> + gsc_write(cfg, GSC_SW_RESET);
>> +
>> + /* wait s/w reset complete */
>> + while (count--) {
>> + cfg = gsc_read(GSC_SW_RESET);
>> + if (!cfg)
>> + break;
>> + usleep_range(1000, 2000);
>> + }
>> +
>> + if (cfg) {
>> + DRM_ERROR("failed to reset gsc h/w.\n");
>> + return -EBUSY;
>> + }
>> +
>> + /* display fifo reset */
>> + cfg = readl(SYSREG_GSCBLK_CFG0);
>> + /*
>> + * GSCBLK Pixel asyncy FIFO S/W reset sequence
>> + * set PXLASYNC_SW_RESET as 0 then,
>> + * set PXLASYNC_SW_RESET as 1 again
>> + */
>> + cfg &= ~GSC_PXLASYNC_RST(ctx->id);
>> + writel(cfg, SYSREG_GSCBLK_CFG0);
>> + cfg |= GSC_PXLASYNC_RST(ctx->id);
>> + writel(cfg, SYSREG_GSCBLK_CFG0);
>> +
>> + /* pixel async reset */
>> + cfg = readl(SYSREG_DISP1BLK_CFG);
>> + /*
>> + * DISPBLK1 FIFO S/W reset sequence
>> + * set FIFORST_DISP1 as 0 then,
>> + * set FIFORST_DISP1 as 1 again
>> + */
>> + cfg &= ~FIFORST_DISP1;
>> + writel(cfg, SYSREG_DISP1BLK_CFG);
>> + cfg |= FIFORST_DISP1;
>> + writel(cfg, SYSREG_DISP1BLK_CFG);
>> +
>> + /* reset sequence */
>> + cfg = gsc_read(GSC_IN_BASE_ADDR_Y_MASK);
>> + cfg |= (GSC_IN_BASE_ADDR_MASK |
>> + GSC_IN_BASE_ADDR_PINGPONG(0));
>> + gsc_write(cfg, GSC_IN_BASE_ADDR_Y_MASK);
>> + gsc_write(cfg, GSC_IN_BASE_ADDR_CB_MASK);
>> + gsc_write(cfg, GSC_IN_BASE_ADDR_CR_MASK);
>> +
>> + cfg = gsc_read(GSC_OUT_BASE_ADDR_Y_MASK);
>> + cfg |= (GSC_OUT_BASE_ADDR_MASK |
>> + GSC_OUT_BASE_ADDR_PINGPONG(0));
>> + gsc_write(cfg, GSC_OUT_BASE_ADDR_Y_MASK);
>> + gsc_write(cfg, GSC_OUT_BASE_ADDR_CB_MASK);
>> + gsc_write(cfg, GSC_OUT_BASE_ADDR_CR_MASK);
>> +
>> + return 0;
>> +}
>> +
>> +static void gsc_set_gscblk_fimd_wb(struct gsc_context *ctx, bool enable)
>> +{
>> + u32 gscblk_cfg;
>> +
>> + DRM_DEBUG_KMS("%s\n", __func__);
>> +
>> + gscblk_cfg = readl(SYSREG_GSCBLK_CFG1);
>> +
>> + if (enable)
>> + gscblk_cfg |= GSC_BLK_DISP1WB_DEST(ctx->id) |
>> + GSC_BLK_GSCL_WB_IN_SRC_SEL(ctx->id) |
>> + GSC_BLK_SW_RESET_WB_DEST(ctx->id);
>> + else
>> + gscblk_cfg |= GSC_BLK_PXLASYNC_LO_MASK_WB(ctx->id);
>> +
>> + writel(gscblk_cfg, SYSREG_GSCBLK_CFG1);
>> +}
>> +
>> +static void gsc_handle_irq(struct gsc_context *ctx, bool enable,
>> + bool overflow, bool done)
>
> Overflow and down argument are used to same value always in this driver.
> Is it right?
- It is handle irq flag API. I want to handle irq flags using this api.
so, I added enable/overflow/done argument.
>
>> +{
>> + u32 cfg;
>> +
>> + DRM_DEBUG_KMS("%s:enable[%d]overflow[%d]level[%d]\n", __func__,
>> + enable, overflow, done);
>> +
>> + cfg = gsc_read(GSC_IRQ);
>> + cfg |= (GSC_IRQ_OR_MASK | GSC_IRQ_FRMDONE_MASK);
>
> Unnecessary initialization.
- It is just clear cfg flag. I think that is need.
>
>> +
>> + if (enable)
>> + cfg |= GSC_IRQ_ENABLE;
>> + else
>> + cfg &= ~GSC_IRQ_ENABLE;
>> +
>> + if (overflow)
>> + cfg &= ~GSC_IRQ_OR_MASK;
>> + else
>> + cfg |= GSC_IRQ_OR_MASK;
>> +
>> + if (done)
>> + cfg &= ~GSC_IRQ_FRMDONE_MASK;
>> + else
>> + cfg |= GSC_IRQ_FRMDONE_MASK;
>> +
>> + gsc_write(cfg, GSC_IRQ);
>> +}
>> +
>> +
>> +static int gsc_src_set_fmt(struct device *dev, u32 fmt)
>> +{
>> + struct gsc_context *ctx = get_gsc_context(dev);
>> + struct exynos_drm_ippdrv *ippdrv = &ctx->ippdrv;
>> + u32 cfg;
>> +
>> + DRM_DEBUG_KMS("%s:fmt[0x%x]\n", __func__, fmt);
>> +
>> + cfg = gsc_read(GSC_IN_CON);
>> + cfg &= ~(GSC_IN_RGB_TYPE_MASK | GSC_IN_YUV422_1P_ORDER_MASK |
>> + GSC_IN_CHROMA_ORDER_MASK | GSC_IN_FORMAT_MASK |
>> + GSC_IN_TILE_TYPE_MASK | GSC_IN_TILE_MODE |
>> + GSC_IN_CHROM_STRIDE_SEL_MASK | GSC_IN_RB_SWAP_MASK);
>> +
>> + switch (fmt) {
>> + case DRM_FORMAT_RGB565:
>> + cfg |= GSC_IN_RGB565;
>> + break;
>> + case DRM_FORMAT_XRGB8888:
>> + cfg |= GSC_IN_XRGB8888;
>> + break;
>> + case DRM_FORMAT_BGRX8888:
>> + cfg |= (GSC_IN_XRGB8888 | GSC_IN_RB_SWAP);
>> + break;
>> + case DRM_FORMAT_YUYV:
>> + cfg |= (GSC_IN_YUV422_1P |
>> + GSC_IN_YUV422_1P_ORDER_LSB_Y |
>> + GSC_IN_CHROMA_ORDER_CBCR);
>> + break;
>> + case DRM_FORMAT_YVYU:
>> + cfg |= (GSC_IN_YUV422_1P |
>> + GSC_IN_YUV422_1P_ORDER_LSB_Y |
>> + GSC_IN_CHROMA_ORDER_CRCB);
>> + break;
>> + case DRM_FORMAT_UYVY:
>> + cfg |= (GSC_IN_YUV422_1P |
>> + GSC_IN_YUV422_1P_OEDER_LSB_C |
>> + GSC_IN_CHROMA_ORDER_CBCR);
>> + break;
>> + case DRM_FORMAT_VYUY:
>> + cfg |= (GSC_IN_YUV422_1P |
>> + GSC_IN_YUV422_1P_OEDER_LSB_C |
>> + GSC_IN_CHROMA_ORDER_CRCB);
>> + break;
>> + case DRM_FORMAT_NV21:
>> + case DRM_FORMAT_NV61:
>> + cfg |= (GSC_IN_CHROMA_ORDER_CRCB |
>> + GSC_IN_YUV420_2P);
>> + break;
>> + case DRM_FORMAT_YUV422:
>> + cfg |= GSC_IN_YUV422_3P;
>> + break;
>> + case DRM_FORMAT_YUV420:
>> + case DRM_FORMAT_YVU420:
>> + cfg |= GSC_IN_YUV420_3P;
>> + break;
>> + case DRM_FORMAT_NV12:
>> + case DRM_FORMAT_NV16:
>> + cfg |= (GSC_IN_CHROMA_ORDER_CBCR |
>> + GSC_IN_YUV420_2P);
>> + break;
>> + case DRM_FORMAT_NV12MT:
>> + cfg |= (GSC_IN_TILE_C_16x8 | GSC_IN_TILE_MODE);
>> + break;
>> + default:
>> + dev_err(ippdrv->dev, "inavlid target yuv order 0x%x.\n", fmt);
>> + return -EINVAL;
>> + }
>> +
>> + gsc_write(cfg, GSC_IN_CON);
>> +
>> + return 0;
>> +}
>> +
>> +static int gsc_src_set_transf(struct device *dev,
>> + enum drm_exynos_degree degree,
>> + enum drm_exynos_flip flip)
>> +{
>> + struct gsc_context *ctx = get_gsc_context(dev);
>> + struct exynos_drm_ippdrv *ippdrv = &ctx->ippdrv;
>> + u32 cfg;
>> +
>> + DRM_DEBUG_KMS("%s:degree[%d]flip[0x%x]\n", __func__,
>> + degree, flip);
>> +
>> + cfg = gsc_read(GSC_IN_CON);
>> + cfg &= ~GSC_IN_ROT_MASK;
>> +
>> + switch (degree) {
>> + case EXYNOS_DRM_DEGREE_0:
>> + if (flip & EXYNOS_DRM_FLIP_VERTICAL)
>> + cfg |= GSC_IN_ROT_XFLIP;
>> + if (flip & EXYNOS_DRM_FLIP_HORIZONTAL)
>> + cfg |= GSC_IN_ROT_YFLIP;
>> + break;
>> + case EXYNOS_DRM_DEGREE_90:
>> + if (flip & EXYNOS_DRM_FLIP_VERTICAL)
>> + cfg |= GSC_IN_ROT_90_XFLIP;
>> + else if (flip & EXYNOS_DRM_FLIP_HORIZONTAL)
>> + cfg |= GSC_IN_ROT_90_YFLIP;
>> + else
>> + cfg |= GSC_IN_ROT_90;
>> + break;
>> + case EXYNOS_DRM_DEGREE_180:
>> + cfg |= GSC_IN_ROT_180;
>> + break;
>> + case EXYNOS_DRM_DEGREE_270:
>> + cfg |= GSC_IN_ROT_270;
>> + break;
>> + default:
>> + dev_err(ippdrv->dev, "inavlid degree value %d.\n", degree);
>> + return -EINVAL;
>> + }
>> +
>> + gsc_write(cfg, GSC_IN_CON);
>> +
>> + ctx->rotation = cfg &
>> + (GSC_IN_ROT_90 | GSC_IN_ROT_270) ? 1 : 0;
>> +
>> + return ctx->rotation;
>> +}
>> +
>> +static int gsc_src_set_size(struct device *dev, int swap,
>> + struct drm_exynos_pos *pos, struct drm_exynos_sz *sz)
>> +{
>> + struct gsc_context *ctx = get_gsc_context(dev);
>> + struct drm_exynos_pos img_pos = *pos;
>> + struct gsc_scaler *sc = &ctx->sc;
>> + u32 cfg;
>> +
>> + DRM_DEBUG_KMS("%s:swap[%d]x[%d]y[%d]w[%d]h[%d]\n",
>> + __func__, swap, pos->x, pos->y, pos->w, pos->h);
>> +
>> + if (swap) {
>> + img_pos.w = pos->h;
>> + img_pos.h = pos->w;
>> + }
>> +
>> + /* pixel offset */
>> + cfg = (GSC_SRCIMG_OFFSET_X(img_pos.x) |
>> + GSC_SRCIMG_OFFSET_Y(img_pos.y));
>> + gsc_write(cfg, GSC_SRCIMG_OFFSET);
>> +
>> + /* cropped size */
>> + cfg = (GSC_CROPPED_WIDTH(img_pos.w) |
>> + GSC_CROPPED_HEIGHT(img_pos.h));
>> + gsc_write(cfg, GSC_CROPPED_SIZE);
>> +
>> + DRM_DEBUG_KMS("%s:hsize[%d]vsize[%d]\n",
>> + __func__, sz->hsize, sz->vsize);
>> +
>> + /* original size */
>> + cfg = gsc_read(GSC_SRCIMG_SIZE);
>> + cfg &= ~(GSC_SRCIMG_HEIGHT_MASK |
>> + GSC_SRCIMG_WIDTH_MASK);
>> +
>> + cfg |= (GSC_SRCIMG_WIDTH(sz->hsize) |
>> + GSC_SRCIMG_HEIGHT(sz->vsize));
>> +
>> + gsc_write(cfg, GSC_SRCIMG_SIZE);
>> +
>> + cfg = gsc_read(GSC_IN_CON);
>> + cfg &= ~GSC_IN_RGB_TYPE_MASK;
>> +
>> + DRM_DEBUG_KMS("%s:width[%d]range[%d]\n",
>> + __func__, pos->w, sc->range);
>> +
>> + if (pos->w >= GSC_WIDTH_ITU_709)
>> + if (sc->range)
>> + cfg |= GSC_IN_RGB_HD_WIDE;
>> + else
>> + cfg |= GSC_IN_RGB_HD_NARROW;
>> + else
>> + if (sc->range)
>> + cfg |= GSC_IN_RGB_SD_WIDE;
>> + else
>> + cfg |= GSC_IN_RGB_SD_NARROW;
>> +
>> + gsc_write(cfg, GSC_IN_CON);
>> +
>> + return 0;
>> +}
>> +
>> +static int gsc_src_set_buf_seq(struct gsc_context *ctx, u32 buf_id,
>> + enum drm_exynos_ipp_buf_type buf_type)
>> +{
>> + struct exynos_drm_ippdrv *ippdrv = &ctx->ippdrv;
>> + bool masked;
>> + u32 cfg;
>> + u32 mask = 0x00000001 << buf_id;
>> +
>> + DRM_DEBUG_KMS("%s:buf_id[%d]buf_type[%d]\n", __func__,
>> + buf_id, buf_type);
>> +
>> + /* mask register set */
>> + cfg = gsc_read(GSC_IN_BASE_ADDR_Y_MASK);
>> +
>> + switch (buf_type) {
>> + case IPP_BUF_ENQUEUE:
>> + masked = false;
>> + break;
>> + case IPP_BUF_DEQUEUE:
>> + masked = true;
>> + break;
>> + default:
>> + dev_err(ippdrv->dev, "invalid buf ctrl parameter.\n");
>> + return -EINVAL;
>> + }
>> +
>> + /* sequence id */
>> + cfg &= (~mask);
>
> Unnecessary parenthesis.
- done.
>
>> + cfg |= masked << buf_id;
>> + gsc_write(cfg, GSC_IN_BASE_ADDR_Y_MASK);
>> + gsc_write(cfg, GSC_IN_BASE_ADDR_CB_MASK);
>> + gsc_write(cfg, GSC_IN_BASE_ADDR_CR_MASK);
>> +
>> + return 0;
>> +}
>> +
>> +static int gsc_src_set_addr(struct device *dev,
>> + struct drm_exynos_ipp_buf_info *buf_info, u32 buf_id,
>> + enum drm_exynos_ipp_buf_type buf_type)
>> +{
>> + struct gsc_context *ctx = get_gsc_context(dev);
>> + struct exynos_drm_ippdrv *ippdrv = &ctx->ippdrv;
>> + struct drm_exynos_ipp_cmd_node *c_node = ippdrv->cmd;
>> + struct drm_exynos_ipp_property *property;
>> +
>> + if (!c_node) {
>> + DRM_ERROR("failed to get c_node.\n");
>> + return -EINVAL;
>
> -EFAULT
- done.
>
>> + }
>> +
>> + property = &c_node->property;
>> + if (!property) {
>> + DRM_ERROR("failed to get property.\n");
>> + return -EINVAL;
>
> -EFAULT
- done.
>
>> + }
>> +
>> + DRM_DEBUG_KMS("%s:prop_id[%d]buf_id[%d]buf_type[%d]\n", __func__,
>> + property->prop_id, buf_id, buf_type);
>> +
>> + if (buf_id > GSC_MAX_SRC) {
>> + dev_info(ippdrv->dev, "inavlid buf_id %d.\n", buf_id);
>> + return -ENOMEM;
>
> -EINVAL
- done.
>
>> + }
>> +
>> + /* address register set */
>> + switch (buf_type) {
>> + case IPP_BUF_ENQUEUE:
>> + gsc_write(buf_info->base[EXYNOS_DRM_PLANAR_Y],
>> + GSC_IN_BASE_ADDR_Y(buf_id));
>> + gsc_write(buf_info->base[EXYNOS_DRM_PLANAR_CB],
>> + GSC_IN_BASE_ADDR_CB(buf_id));
>> + gsc_write(buf_info->base[EXYNOS_DRM_PLANAR_CR],
>> + GSC_IN_BASE_ADDR_CR(buf_id));
>> + break;
>> + case IPP_BUF_DEQUEUE:
>> + gsc_write(0x0, GSC_IN_BASE_ADDR_Y(buf_id));
>> + gsc_write(0x0, GSC_IN_BASE_ADDR_CB(buf_id));
>> + gsc_write(0x0, GSC_IN_BASE_ADDR_CR(buf_id));
>> + break;
>> + default:
>> + /* bypass */
>> + break;
>> + }
>> +
>> + return gsc_src_set_buf_seq(ctx, buf_id, buf_type);
>> +}
>> +
>> +static struct exynos_drm_ipp_ops gsc_src_ops = {
>> + .set_fmt = gsc_src_set_fmt,
>> + .set_transf = gsc_src_set_transf,
>> + .set_size = gsc_src_set_size,
>> + .set_addr = gsc_src_set_addr,
>> +};
>> +
>> +static int gsc_dst_set_fmt(struct device *dev, u32 fmt)
>> +{
>> + struct gsc_context *ctx = get_gsc_context(dev);
>> + struct exynos_drm_ippdrv *ippdrv = &ctx->ippdrv;
>> + u32 cfg;
>> +
>> + DRM_DEBUG_KMS("%s:fmt[0x%x]\n", __func__, fmt);
>> +
>> + cfg = gsc_read(GSC_OUT_CON);
>> + cfg &= ~(GSC_OUT_RGB_TYPE_MASK | GSC_OUT_YUV422_1P_ORDER_MASK |
>> + GSC_OUT_CHROMA_ORDER_MASK | GSC_OUT_FORMAT_MASK |
>> + GSC_OUT_CHROM_STRIDE_SEL_MASK | GSC_OUT_RB_SWAP_MASK |
>> + GSC_OUT_GLOBAL_ALPHA_MASK);
>> +
>> + switch (fmt) {
>> + case DRM_FORMAT_RGB565:
>> + cfg |= GSC_OUT_RGB565;
>> + break;
>> + case DRM_FORMAT_XRGB8888:
>> + cfg |= GSC_OUT_XRGB8888;
>> + break;
>> + case DRM_FORMAT_BGRX8888:
>> + cfg |= (GSC_OUT_XRGB8888 | GSC_OUT_RB_SWAP);
>> + break;
>> + case DRM_FORMAT_YUYV:
>> + cfg |= (GSC_OUT_YUV422_1P |
>> + GSC_OUT_YUV422_1P_ORDER_LSB_Y |
>> + GSC_OUT_CHROMA_ORDER_CBCR);
>> + break;
>> + case DRM_FORMAT_YVYU:
>> + cfg |= (GSC_OUT_YUV422_1P |
>> + GSC_OUT_YUV422_1P_ORDER_LSB_Y |
>> + GSC_OUT_CHROMA_ORDER_CRCB);
>> + break;
>> + case DRM_FORMAT_UYVY:
>> + cfg |= (GSC_OUT_YUV422_1P |
>> + GSC_OUT_YUV422_1P_OEDER_LSB_C |
>> + GSC_OUT_CHROMA_ORDER_CBCR);
>> + break;
>> + case DRM_FORMAT_VYUY:
>> + cfg |= (GSC_OUT_YUV422_1P |
>> + GSC_OUT_YUV422_1P_OEDER_LSB_C |
>> + GSC_OUT_CHROMA_ORDER_CRCB);
>> + break;
>> + case DRM_FORMAT_NV21:
>> + case DRM_FORMAT_NV61:
>> + cfg |= (GSC_OUT_CHROMA_ORDER_CRCB |
>> + GSC_OUT_YUV420_2P);
>
> Please check to join to one line overall. This line can be in 80 character.
- Thank's. done.
>
>> + break;
>> + case DRM_FORMAT_YUV422:
>> + case DRM_FORMAT_YUV420:
>> + case DRM_FORMAT_YVU420:
>> + cfg |= GSC_OUT_YUV420_3P;
>> + break;
>> + case DRM_FORMAT_NV12:
>> + case DRM_FORMAT_NV16:
>> + cfg |= (GSC_OUT_CHROMA_ORDER_CBCR |
>> + GSC_OUT_YUV420_2P);
>> + break;
>> + case DRM_FORMAT_NV12MT:
>> + cfg |= (GSC_OUT_TILE_C_16x8 | GSC_OUT_TILE_MODE);
>> + break;
>> + default:
>> + dev_err(ippdrv->dev, "inavlid target yuv order 0x%x.\n", fmt);
>> + return -EINVAL;
>> + }
>> +
>> + gsc_write(cfg, GSC_OUT_CON);
>> +
>> + return 0;
>> +}
>> +
>> +static int gsc_dst_set_transf(struct device *dev,
>> + enum drm_exynos_degree degree,
>> + enum drm_exynos_flip flip)
>> +{
>> + struct gsc_context *ctx = get_gsc_context(dev);
>> + struct exynos_drm_ippdrv *ippdrv = &ctx->ippdrv;
>> + u32 cfg;
>> +
>> + DRM_DEBUG_KMS("%s:degree[%d]flip[0x%x]\n", __func__,
>> + degree, flip);
>> +
>> + cfg = gsc_read(GSC_IN_CON);
>> + cfg &= ~GSC_IN_ROT_MASK;
>> +
>> + switch (degree) {
>> + case EXYNOS_DRM_DEGREE_0:
>> + if (flip & EXYNOS_DRM_FLIP_VERTICAL)
>> + cfg |= GSC_IN_ROT_XFLIP;
>> + if (flip & EXYNOS_DRM_FLIP_HORIZONTAL)
>> + cfg |= GSC_IN_ROT_YFLIP;
>> + break;
>> + case EXYNOS_DRM_DEGREE_90:
>> + if (flip & EXYNOS_DRM_FLIP_VERTICAL)
>> + cfg |= GSC_IN_ROT_90_XFLIP;
>> + else if (flip & EXYNOS_DRM_FLIP_HORIZONTAL)
>> + cfg |= GSC_IN_ROT_90_YFLIP;
>> + else
>> + cfg |= GSC_IN_ROT_90;
>> + break;
>> + case EXYNOS_DRM_DEGREE_180:
>> + cfg |= GSC_IN_ROT_180;
>> + break;
>> + case EXYNOS_DRM_DEGREE_270:
>> + cfg |= GSC_IN_ROT_270;
>> + break;
>> + default:
>> + dev_err(ippdrv->dev, "inavlid degree value %d.\n", degree);
>> + return -EINVAL;
>> + }
>> +
>> + gsc_write(cfg, GSC_IN_CON);
>> +
>> + ctx->rotation = cfg &
>> + (GSC_IN_ROT_90 | GSC_IN_ROT_270) ? 1 : 0;
>> +
>> + return ctx->rotation;
>> +}
>> +
>> +static int gsc_get_ratio_shift(u32 src, u32 dst, u32 *ratio)
>> +{
>> + DRM_DEBUG_KMS("%s:src[%d]dst[%d]\n", __func__, src, dst);
>> +
>> + if (src >= dst * 8) {
>> + DRM_ERROR("failed to make ratio and shift.\n");
>> + return -EINVAL;
>> + } else if (src >= dst * 4)
>> + *ratio = 4;
>> + else if (src >= dst * 2)
>> + *ratio = 2;
>> + else
>> + *ratio = 1;
>> +
>> + return 0;
>> +}
>> +
>> +static void gsc_get_prescaler_shfactor(u32 hratio, u32 vratio, u32
>> *shfactor)
>> +{
>> + if (hratio == 4 && vratio == 4)
>> + *shfactor = 4;
>> + else if ((hratio == 4 && vratio == 2) ||
>> + (hratio == 2 && vratio == 4))
>> + *shfactor = 3;
>> + else if ((hratio == 4 && vratio == 1) ||
>> + (hratio == 1 && vratio == 4) ||
>> + (hratio == 2 && vratio == 2))
>> + *shfactor = 2;
>> + else if (hratio == 1 && vratio == 1)
>> + *shfactor = 0;
>> + else
>> + *shfactor = 1;
>> +}
>> +
>> +static int gsc_set_prescaler(struct gsc_context *ctx, struct
>> gsc_scaler *sc,
>> + struct drm_exynos_pos *src, struct drm_exynos_pos *dst)
>> +{
>> + struct exynos_drm_ippdrv *ippdrv = &ctx->ippdrv;
>> + u32 cfg;
>> + u32 src_w, src_h, dst_w, dst_h;
>> + int ret = 0;
>> +
>> + src_w = src->w;
>> + src_h = src->h;
>> +
>> + if (ctx->rotation) {
>> + dst_w = dst->h;
>> + dst_h = dst->w;
>> + } else {
>> + dst_w = dst->w;
>> + dst_h = dst->h;
>> + }
>> +
>> + ret = gsc_get_ratio_shift(src_w, dst_w, &sc->pre_hratio);
>> + if (ret) {
>> + dev_err(ippdrv->dev, "failed to get ratio horizontal.\n");
>> + return ret;
>> + }
>> +
>> + ret = gsc_get_ratio_shift(src_h, dst_h, &sc->pre_vratio);
>> + if (ret) {
>> + dev_err(ippdrv->dev, "failed to get ratio vertical.\n");
>> + return ret;
>> + }
>> +
>> + DRM_DEBUG_KMS("%s:pre_hratio[%d]pre_vratio[%d]\n",
>> + __func__, sc->pre_hratio, sc->pre_vratio);
>> +
>> + sc->main_hratio = (src_w << 16) / dst_w;
>> + sc->main_vratio = (src_h << 16) / dst_h;
>> +
>> + DRM_DEBUG_KMS("%s:main_hratio[%ld]main_vratio[%ld]\n",
>> + __func__, sc->main_hratio, sc->main_vratio);
>> +
>> + gsc_get_prescaler_shfactor(sc->pre_hratio, sc->pre_vratio,
>> + &sc->pre_shfactor);
>> +
>> + DRM_DEBUG_KMS("%s:pre_shfactor[%d]\n", __func__,
>> + sc->pre_shfactor);
>> +
>> + cfg = (GSC_PRESC_SHFACTOR(sc->pre_shfactor) |
>> + GSC_PRESC_H_RATIO(sc->pre_hratio) |
>> + GSC_PRESC_V_RATIO(sc->pre_vratio));
>> + gsc_write(cfg, GSC_PRE_SCALE_RATIO);
>> +
>> + return ret;
>> +}
>> +
>> +static void gsc_set_h_coef(struct gsc_context *ctx, unsigned long
>> main_hratio)
>> +{
>> + int i, j, k, sc_ratio;
>> +
>> + if (main_hratio <= GSC_SC_UP_MAX_RATIO)
>> + sc_ratio = 0;
>> + else if (main_hratio <= GSC_SC_DOWN_RATIO_7_8)
>> + sc_ratio = 1;
>> + else if (main_hratio <= GSC_SC_DOWN_RATIO_6_8)
>> + sc_ratio = 2;
>> + else if (main_hratio <= GSC_SC_DOWN_RATIO_5_8)
>> + sc_ratio = 3;
>> + else if (main_hratio <= GSC_SC_DOWN_RATIO_4_8)
>> + sc_ratio = 4;
>> + else if (main_hratio <= GSC_SC_DOWN_RATIO_3_8)
>> + sc_ratio = 5;
>> + else
>> + sc_ratio = 6;
>> +
>> + for (i = 0; i < 9; i++)
>> + for (j = 0; j < 8; j++)
>> + for (k = 0; k < 3; k++)
>> + gsc_write(h_coef_8t[sc_ratio][i][j],
>> + GSC_HCOEF(i, j, k));
>
> Please define constants to macro or get array size.
- about for loop ? or value ?
>
>> +}
>> +
>> +static void gsc_set_v_coef(struct gsc_context *ctx, unsigned long
>> main_vratio)
>> +{
>> + int i, j, k, sc_ratio = 0;
>
> Unnecessary initialization.
- done.
>
>> +
>> + if (main_vratio <= GSC_SC_UP_MAX_RATIO)
>> + sc_ratio = 0;
>> + else if (main_vratio <= GSC_SC_DOWN_RATIO_7_8)
>> + sc_ratio = 1;
>> + else if (main_vratio <= GSC_SC_DOWN_RATIO_6_8)
>> + sc_ratio = 2;
>> + else if (main_vratio <= GSC_SC_DOWN_RATIO_5_8)
>> + sc_ratio = 3;
>> + else if (main_vratio <= GSC_SC_DOWN_RATIO_4_8)
>> + sc_ratio = 4;
>> + else if (main_vratio <= GSC_SC_DOWN_RATIO_3_8)
>> + sc_ratio = 5;
>> + else
>> + sc_ratio = 6;
>> +
>> + for (i = 0; i < 9; i++)
>> + for (j = 0; j < 4; j++)
>> + for (k = 0; k < 3; k++)
>> + gsc_write(v_coef_4t[sc_ratio][i][j],
>> + GSC_VCOEF(i, j, k));
>> +}
>> +
>> +static void gsc_set_scaler(struct gsc_context *ctx, struct gsc_scaler
>> *sc)
>> +{
>> + u32 cfg;
>> +
>> + DRM_DEBUG_KMS("%s:main_hratio[%ld]main_vratio[%ld]\n",
>> + __func__, sc->main_hratio, sc->main_vratio);
>> +
>> + gsc_set_h_coef(ctx, sc->main_hratio);
>> + cfg = GSC_MAIN_H_RATIO_VALUE(sc->main_hratio);
>> + gsc_write(cfg, GSC_MAIN_H_RATIO);
>> +
>> + gsc_set_v_coef(ctx, sc->main_vratio);
>> + cfg = GSC_MAIN_V_RATIO_VALUE(sc->main_vratio);
>> + gsc_write(cfg, GSC_MAIN_V_RATIO);
>> +}
>> +
>> +static int gsc_dst_set_size(struct device *dev, int swap,
>> + struct drm_exynos_pos *pos, struct drm_exynos_sz *sz)
>> +{
>> + struct gsc_context *ctx = get_gsc_context(dev);
>> + struct drm_exynos_pos img_pos = *pos;
>> + struct gsc_scaler *sc = &ctx->sc;
>> + u32 cfg;
>> +
>> + DRM_DEBUG_KMS("%s:swap[%d]x[%d]y[%d]w[%d]h[%d]\n",
>> + __func__, swap, pos->x, pos->y, pos->w, pos->h);
>> +
>> + if (swap) {
>> + img_pos.w = pos->h;
>> + img_pos.h = pos->w;
>> + }
>> +
>> + /* pixel offset */
>> + cfg = (GSC_DSTIMG_OFFSET_X(pos->x) |
>> + GSC_DSTIMG_OFFSET_Y(pos->y));
>> + gsc_write(cfg, GSC_DSTIMG_OFFSET);
>> +
>> + /* scaled size */
>> + cfg = (GSC_SCALED_WIDTH(img_pos.w) | GSC_SCALED_HEIGHT(img_pos.h));
>> + gsc_write(cfg, GSC_SCALED_SIZE);
>> +
>> + DRM_DEBUG_KMS("%s:hsize[%d]vsize[%d]\n",
>> + __func__, sz->hsize, sz->vsize);
>> +
>> + /* original size */
>> + cfg = gsc_read(GSC_DSTIMG_SIZE);
>> + cfg &= ~(GSC_DSTIMG_HEIGHT_MASK |
>> + GSC_DSTIMG_WIDTH_MASK);
>> + cfg |= (GSC_DSTIMG_WIDTH(sz->hsize) |
>> + GSC_DSTIMG_HEIGHT(sz->vsize));
>> + gsc_write(cfg, GSC_DSTIMG_SIZE);
>> +
>> + cfg = gsc_read(GSC_OUT_CON);
>> + cfg &= ~GSC_OUT_RGB_TYPE_MASK;
>> +
>> + DRM_DEBUG_KMS("%s:width[%d]range[%d]\n",
>> + __func__, pos->w, sc->range);
>> +
>> + if (pos->w >= GSC_WIDTH_ITU_709)
>> + if (sc->range)
>> + cfg |= GSC_OUT_RGB_HD_WIDE;
>> + else
>> + cfg |= GSC_OUT_RGB_HD_NARROW;
>> + else
>> + if (sc->range)
>> + cfg |= GSC_OUT_RGB_SD_WIDE;
>> + else
>> + cfg |= GSC_OUT_RGB_SD_NARROW;
>> +
>> + gsc_write(cfg, GSC_OUT_CON);
>> +
>> + return 0;
>> +}
>> +
>> +static int gsc_dst_get_buf_seq(struct gsc_context *ctx)
>> +{
>> + u32 cfg, i, buf_num = GSC_REG_SZ;
>> + u32 mask = 0x00000001;
>> +
>> + cfg = gsc_read(GSC_OUT_BASE_ADDR_Y_MASK);
>> +
>> + for (i = 0; i < GSC_REG_SZ; i++)
>> + if (cfg & (mask << i))
>> + buf_num--;
>> +
>> + DRM_DEBUG_KMS("%s:buf_num[%d]\n", __func__, buf_num);
>> +
>> + return buf_num;
>> +}
>> +
>> +static int gsc_dst_set_buf_seq(struct gsc_context *ctx, u32 buf_id,
>> + enum drm_exynos_ipp_buf_type buf_type)
>> +{
>> + struct exynos_drm_ippdrv *ippdrv = &ctx->ippdrv;
>> + bool masked;
>> + u32 cfg;
>> + u32 mask = 0x00000001 << buf_id;
>> + int ret = 0;
>> +
>> + DRM_DEBUG_KMS("%s:buf_id[%d]buf_type[%d]\n", __func__,
>> + buf_id, buf_type);
>> +
>> + mutex_lock(&ctx->lock);
>> +
>> + /* mask register set */
>> + cfg = gsc_read(GSC_OUT_BASE_ADDR_Y_MASK);
>> +
>> + switch (buf_type) {
>> + case IPP_BUF_ENQUEUE:
>> + masked = false;
>> + break;
>> + case IPP_BUF_DEQUEUE:
>> + masked = true;
>> + break;
>> + default:
>> + dev_err(ippdrv->dev, "invalid buf ctrl parameter.\n");
>> + ret = -EINVAL;
>> + goto err_unlock;
>> + }
>> +
>> + /* sequence id */
>> + cfg &= (~mask);
>
> Unnecessary parenthesis.
- done.
>
>> + cfg |= masked << buf_id;
>> + gsc_write(cfg, GSC_OUT_BASE_ADDR_Y_MASK);
>> + gsc_write(cfg, GSC_OUT_BASE_ADDR_CB_MASK);
>> + gsc_write(cfg, GSC_OUT_BASE_ADDR_CR_MASK);
>> +
>> + /* interrupt enable */
>> + if (buf_type == IPP_BUF_ENQUEUE &&
>> + gsc_dst_get_buf_seq(ctx) >= GSC_BUF_START)
>> + gsc_handle_irq(ctx, true, false, true);
>> +
>> + /* interrupt disable */
>> + if (buf_type == IPP_BUF_DEQUEUE &&
>> + gsc_dst_get_buf_seq(ctx) <= GSC_BUF_STOP)
>> + gsc_handle_irq(ctx, false, false, true);
>> +
>> +err_unlock:
>> + mutex_unlock(&ctx->lock);
>> + return ret;
>> +}
>> +
>> +static int gsc_dst_set_addr(struct device *dev,
>> + struct drm_exynos_ipp_buf_info *buf_info, u32 buf_id,
>> + enum drm_exynos_ipp_buf_type buf_type)
>> +{
>> + struct gsc_context *ctx = get_gsc_context(dev);
>> + struct exynos_drm_ippdrv *ippdrv = &ctx->ippdrv;
>> + struct drm_exynos_ipp_cmd_node *c_node = ippdrv->cmd;
>> + struct drm_exynos_ipp_property *property;
>> +
>> + if (!c_node) {
>> + DRM_ERROR("failed to get c_node.\n");
>> + return -EINVAL;
>
> -EFAULT
- done.
>
>> + }
>> +
>> + property = &c_node->property;
>> + if (!property) {
>> + DRM_ERROR("failed to get property.\n");
>> + return -EINVAL;
>
> -EFAULT
- done.
>
>> + }
>> +
>> + DRM_DEBUG_KMS("%s:prop_id[%d]buf_id[%d]buf_type[%d]\n", __func__,
>> + property->prop_id, buf_id, buf_type);
>> +
>> + if (buf_id > GSC_MAX_DST) {
>> + dev_info(ippdrv->dev, "inavlid buf_id %d.\n", buf_id);
>> + return -ENOMEM;
>
> -EINVAL
- done.
>
>> + }
>> +
>> + /* address register set */
>> + switch (buf_type) {
>> + case IPP_BUF_ENQUEUE:
>> + gsc_write(buf_info->base[EXYNOS_DRM_PLANAR_Y],
>> + GSC_OUT_BASE_ADDR_Y(buf_id));
>> + gsc_write(buf_info->base[EXYNOS_DRM_PLANAR_CB],
>> + GSC_OUT_BASE_ADDR_CB(buf_id));
>> + gsc_write(buf_info->base[EXYNOS_DRM_PLANAR_CR],
>> + GSC_OUT_BASE_ADDR_CR(buf_id));
>> + break;
>> + case IPP_BUF_DEQUEUE:
>> + gsc_write(0x0, GSC_OUT_BASE_ADDR_Y(buf_id));
>> + gsc_write(0x0, GSC_OUT_BASE_ADDR_CB(buf_id));
>> + gsc_write(0x0, GSC_OUT_BASE_ADDR_CR(buf_id));
>> + break;
>> + default:
>> + /* bypass */
>> + break;
>> + }
>> +
>> + return gsc_dst_set_buf_seq(ctx, buf_id, buf_type);
>> +}
>> +
>> +static struct exynos_drm_ipp_ops gsc_dst_ops = {
>> + .set_fmt = gsc_dst_set_fmt,
>> + .set_transf = gsc_dst_set_transf,
>> + .set_size = gsc_dst_set_size,
>> + .set_addr = gsc_dst_set_addr,
>> +};
>> +
>> +static int gsc_clk_ctrl(struct gsc_context *ctx, bool enable)
>> +{
>> + DRM_INFO("%s:enable[%d]\n", __func__, enable);
>
> DRM_DEBUG_KMS?
- sorry my mistaken. done.
>
>> +
>> + if (enable) {
>> + clk_set_parent(ctx->child_clk, ctx->parent_clk);
>
> I think this is enough only to one operation.
- Thank's move to probe.
>
>> + clk_enable(ctx->gsc_clk);
>> + ctx->suspended = false;
>> + } else {
>> + clk_disable(ctx->gsc_clk);
>> + ctx->suspended = true;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int gsc_get_src_buf_index(struct gsc_context *ctx)
>> +{
>> + u32 cfg, curr_index, i;
>> + u32 buf_id = GSC_MAX_SRC;
>> +
>> + DRM_DEBUG_KMS("%s:gsc id[%d]\n", __func__, ctx->id);
>> +
>> + cfg = gsc_read(GSC_IN_BASE_ADDR_Y_MASK);
>> + curr_index = GSC_IN_CURR_GET_INDEX(cfg);
>> +
>> + for (i = curr_index; i < GSC_MAX_SRC; i++) {
>> + if (!((cfg >> i) & 0x1)) {
>> + buf_id = i;
>> + break;
>> + }
>> + }
>> +
>> + if (buf_id == GSC_MAX_SRC) {
>> + DRM_ERROR("failed to get in buffer index.\n");
>> + return -EIO;
>
> Is this IO error?
- Do you want to EINVAL ?
>
>> + }
>> +
>> + if (gsc_src_set_buf_seq(ctx, buf_id, IPP_BUF_DEQUEUE) < 0) {
>> + DRM_ERROR("failed to dequeue.\n");
>> + return IRQ_HANDLED;
>
> Is IRQ_HANDLED right return value?
- my missing point. use 'ret' changed it.
>
>> + }
>> +
>> + DRM_DEBUG_KMS("%s:cfg[0x%x]curr_index[%d]buf_id[%d]\n", __func__,
>> cfg,
>> + curr_index, buf_id);
>> +
>> + return buf_id;
>> +}
>> +
>> +static int gsc_get_dst_buf_index(struct gsc_context *ctx)
>> +{
>> + u32 cfg, curr_index, i;
>> + u32 buf_id = GSC_MAX_DST;
>> +
>> + DRM_DEBUG_KMS("%s:gsc id[%d]\n", __func__, ctx->id);
>> +
>> + cfg = gsc_read(GSC_OUT_BASE_ADDR_Y_MASK);
>> + curr_index = GSC_OUT_CURR_GET_INDEX(cfg);
>> +
>> + for (i = curr_index; i < GSC_MAX_DST; i++) {
>> + if (!((cfg >> i) & 0x1)) {
>> + buf_id = i;
>> + break;
>> + }
>> + }
>> +
>> + if (buf_id == GSC_MAX_DST) {
>> + DRM_ERROR("failed to get out buffer index.\n");
>> + return -EIO;
>
> Is this IO error?
- EINVAL OK ?
>
>> + }
>> +
>> + if (gsc_dst_set_buf_seq(ctx, buf_id, IPP_BUF_DEQUEUE) < 0) {
>> + DRM_ERROR("failed to dequeue.\n");
>> + return IRQ_HANDLED;
>
> Is IRQ_HANDLED right return value?
- changed also.
>
>> + }
>> +
>> + DRM_DEBUG_KMS("%s:cfg[0x%x]curr_index[%d]buf_id[%d]\n", __func__,
>> cfg,
>> + curr_index, buf_id);
>> +
>> + return buf_id;
>> +}
>> +
>> +static irqreturn_t gsc_irq_handler(int irq, void *dev_id)
>> +{
>> + struct gsc_context *ctx = dev_id;
>> + struct exynos_drm_ippdrv *ippdrv = &ctx->ippdrv;
>> + struct drm_exynos_ipp_cmd_node *c_node = ippdrv->cmd;
>> + struct drm_exynos_ipp_event_work *event_work =
>> + c_node->event_work;
>> + u32 status;
>> + int buf_id[EXYNOS_DRM_OPS_MAX];
>> +
>> + DRM_DEBUG_KMS("%s:gsc id[%d]\n", __func__, ctx->id);
>> +
>> + status = gsc_read(GSC_IRQ);
>> + if (status & GSC_IRQ_STATUS_OR_IRQ) {
>> + dev_err(ippdrv->dev, "occured overflow at %d, status 0x%x.\n",
>> + ctx->id, status);
>> + return IRQ_NONE;
>> + }
>> +
>> + if (status & GSC_IRQ_STATUS_OR_FRM_DONE) {
>> + dev_dbg(ippdrv->dev, "occured frame done at %d, status 0x%x.\n",
>> + ctx->id, status);
>> +
>> + buf_id[EXYNOS_DRM_OPS_SRC] = gsc_get_src_buf_index(ctx);
>> + if (buf_id[EXYNOS_DRM_OPS_SRC] < 0)
>> + return IRQ_HANDLED;
>> +
>> + buf_id[EXYNOS_DRM_OPS_DST] = gsc_get_dst_buf_index(ctx);
>> + if (buf_id[EXYNOS_DRM_OPS_DST] < 0)
>> + return IRQ_HANDLED;
>> +
>> + DRM_DEBUG_KMS("%s:buf_id_src[%d]buf_id_dst[%d]\n", __func__,
>> + buf_id[EXYNOS_DRM_OPS_SRC], buf_id[EXYNOS_DRM_OPS_DST]);
>> +
>> + event_work->ippdrv = ippdrv;
>> + event_work->buf_id[EXYNOS_DRM_OPS_SRC] =
>> + buf_id[EXYNOS_DRM_OPS_SRC];
>> + event_work->buf_id[EXYNOS_DRM_OPS_DST] =
>> + buf_id[EXYNOS_DRM_OPS_DST];
>> + queue_work(ippdrv->event_workq,
>> + (struct work_struct *)event_work);
>> + }
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static int gsc_init_prop_list(struct exynos_drm_ippdrv *ippdrv)
>> +{
>> + struct drm_exynos_ipp_prop_list *prop_list;
>> +
>> + DRM_DEBUG_KMS("%s\n", __func__);
>> +
>> + prop_list = kzalloc(sizeof(*prop_list), GFP_KERNEL);
>> + if (!prop_list) {
>> + DRM_ERROR("failed to alloc property list.\n");
>> + return -ENOMEM;
>> + }
>> +
>> + /*ToDo : fix supported function list*/
>
> Please remove comments.
- removed it.
>
>> +
>> + prop_list->version = 1;
>> + prop_list->writeback = 1;
>> + prop_list->refresh_min = GSC_REFRESH_MIN;
>> + prop_list->refresh_max = GSC_REFRESH_MAX;
>> + prop_list->flip = (1 << EXYNOS_DRM_FLIP_VERTICAL) |
>> + (1 << EXYNOS_DRM_FLIP_HORIZONTAL);
>> + prop_list->degree = (1 << EXYNOS_DRM_DEGREE_0) |
>> + (1 << EXYNOS_DRM_DEGREE_90) |
>> + (1 << EXYNOS_DRM_DEGREE_180) |
>> + (1 << EXYNOS_DRM_DEGREE_270);
>> + prop_list->csc = 1;
>> + prop_list->crop = 1;
>> + prop_list->crop_max.hsize = GSC_CROP_MAX;
>> + prop_list->crop_max.vsize = GSC_CROP_MAX;
>> + prop_list->crop_min.hsize = GSC_CROP_MIN;
>> + prop_list->crop_min.vsize = GSC_CROP_MIN;
>> + prop_list->scale = 1;
>
> Hardcode. There are too much flags in prop_list and they are just 1 bit
> on/off flags,
> so i think you can join them to one variable.
- I want to remain this one. If we use combine flags,
userland always check bit and operation.
I don't prefer that.
>
>> + prop_list->scale_max.hsize = GSC_SCALE_MAX;
>> + prop_list->scale_max.vsize = GSC_SCALE_MAX;
>> + prop_list->scale_min.hsize = GSC_SCALE_MIN;
>> + prop_list->scale_min.vsize = GSC_SCALE_MIN;
>> +
>> + ippdrv->prop_list = prop_list;
>> +
>> + return 0;
>> +}
>> +
>> +static int gsc_ippdrv_check_property(struct device *dev,
>> + struct drm_exynos_ipp_property *property)
>> +{
>> + struct gsc_context *ctx = get_gsc_context(dev);
>> + struct exynos_drm_ippdrv *ippdrv = &ctx->ippdrv;
>> + struct drm_exynos_ipp_prop_list *pp = ippdrv->prop_list;
>> + struct drm_exynos_ipp_config *config;
>> + struct drm_exynos_pos *pos;
>> + struct drm_exynos_sz *sz;
>> + bool swap;
>> + int i;
>> +
>> + DRM_DEBUG_KMS("%s\n", __func__);
>> +
>> + for_each_ipp_ops(i) {
>> + if ((i == EXYNOS_DRM_OPS_SRC) &&
>> + (property->cmd == IPP_CMD_WB))
>> + continue;
>> +
>> + config = &property->config[i];
>> + pos = &config->pos;
>> + sz = &config->sz;
>> +
>> + /* check for flip */
>> + switch (config->flip) {
>> + case EXYNOS_DRM_FLIP_NONE:
>> + case EXYNOS_DRM_FLIP_VERTICAL:
>> + case EXYNOS_DRM_FLIP_HORIZONTAL:
>> + case EXYNOS_DRM_FLIP_VERTICAL | EXYNOS_DRM_FLIP_HORIZONTAL:
>> + /* No problem */
>> + break;
>> + default:
>> + DRM_ERROR("invalid flip.\n");
>> + goto err_property;
>> + }
>> +
>> + /* check for degree */
>> + switch (config->degree) {
>> + case EXYNOS_DRM_DEGREE_90:
>> + case EXYNOS_DRM_DEGREE_270:
>> + swap = true;
>> + break;
>> + case EXYNOS_DRM_DEGREE_0:
>> + case EXYNOS_DRM_DEGREE_180:
>> + swap = false;
>> + break;
>> + default:
>> + DRM_ERROR("invalid degree.\n");
>> + goto err_property;
>> + }
>> +
>> + /* check for buffer bound */
>> + if ((pos->x + pos->w > sz->hsize) ||
>> + (pos->y + pos->h > sz->vsize)) {
>> + DRM_ERROR("out of buf bound.\n");
>> + goto err_property;
>> + }
>> +
>> + /* check for crop */
>> + if ((i == EXYNOS_DRM_OPS_SRC) && (pp->crop)) {
>> + if (swap) {
>> + if ((pos->h < pp->crop_min.hsize) ||
>> + (sz->vsize > pp->crop_max.hsize) ||
>> + (pos->w < pp->crop_min.vsize) ||
>> + (sz->hsize > pp->crop_max.vsize)) {
>> + DRM_ERROR("out of crop size.\n");
>> + goto err_property;
>> + }
>> + } else {
>> + if ((pos->w < pp->crop_min.hsize) ||
>> + (sz->hsize > pp->crop_max.hsize) ||
>> + (pos->h < pp->crop_min.vsize) ||
>> + (sz->vsize > pp->crop_max.vsize)) {
>> + DRM_ERROR("out of crop size.\n");
>> + goto err_property;
>> + }
>> + }
>> + }
>> +
>> + /* check for scale */
>> + if ((i == EXYNOS_DRM_OPS_DST) && (pp->scale)) {
>> + if (swap) {
>> + if ((pos->h < pp->scale_min.hsize) ||
>> + (sz->vsize > pp->scale_max.hsize) ||
>> + (pos->w < pp->scale_min.vsize) ||
>> + (sz->hsize > pp->scale_max.vsize)) {
>> + DRM_ERROR("out of scale size.\n");
>> + goto err_property;
>> + }
>> + } else {
>> + if ((pos->w < pp->scale_min.hsize) ||
>> + (sz->hsize > pp->scale_max.hsize) ||
>> + (pos->h < pp->scale_min.vsize) ||
>> + (sz->vsize > pp->scale_max.vsize)) {
>> + DRM_ERROR("out of scale size.\n");
>> + goto err_property;
>> + }
>> + }
>> + }
>> + }
>> +
>> + return 0;
>> +
>> +err_property:
>> + for_each_ipp_ops(i) {
>> + if ((i == EXYNOS_DRM_OPS_SRC) &&
>> + (property->cmd == IPP_CMD_WB))
>> + continue;
>> +
>> + config = &property->config[i];
>> + pos = &config->pos;
>> + sz = &config->sz;
>> +
>> + DRM_ERROR("[%s]f[%d]r[%d]pos[%d %d %d %d]sz[%d %d]\n",
>> + i ? "dst" : "src", config->flip, config->degree,
>> + pos->x, pos->y, pos->w, pos->h,
>> + sz->hsize, sz->vsize);
>> + }
>> +
>> + return -EINVAL;
>> +}
>> +
>> +
>> +static int gsc_ippdrv_reset(struct device *dev)
>> +{
>> + struct gsc_context *ctx = get_gsc_context(dev);
>> + struct gsc_scaler *sc = &ctx->sc;
>> + int ret;
>> +
>> + DRM_DEBUG_KMS("%s\n", __func__);
>> +
>> + /* reset h/w block */
>> + ret = gsc_sw_reset(ctx);
>> + if (ret < 0) {
>> + dev_err(dev, "failed to reset hardware.\n");
>> + return ret;
>> + }
>> +
>> + /* scaler setting */
>> + memset(&ctx->sc, 0x0, sizeof(ctx->sc));
>> + sc->range = true;
>> +
>> + return 0;
>> +}
>> +
>> +static int gsc_check_prepare(struct gsc_context *ctx)
>> +{
>> + /* ToDo: check prepare using read register */
>> +
>> + DRM_DEBUG_KMS("%s\n", __func__);
>> +
>> + return 0;
>> +}
>
> I read your comments but i can't understand why this dummy function
> needs still.
> Please remove and if implement it later, send additional patch.
- removed it. please see the v4 patch.
>
>> +
>> +static int gsc_ippdrv_start(struct device *dev, enum
>> drm_exynos_ipp_cmd cmd)
>> +{
>> + struct gsc_context *ctx = get_gsc_context(dev);
>> + struct exynos_drm_ippdrv *ippdrv = &ctx->ippdrv;
>> + struct drm_exynos_ipp_cmd_node *c_node = ippdrv->cmd;
>> + struct drm_exynos_ipp_property *property;
>> + struct drm_exynos_ipp_config *config;
>> + struct drm_exynos_pos img_pos[EXYNOS_DRM_OPS_MAX];
>> + struct drm_exynos_ipp_set_wb set_wb;
>> + u32 cfg;
>> + int ret, i;
>> +
>> + DRM_DEBUG_KMS("%s:cmd[%d]\n", __func__, cmd);
>> +
>> + if (!c_node) {
>> + DRM_ERROR("failed to get c_node.\n");
>> + return -EINVAL;
>> + }
>> +
>> + property = &c_node->property;
>> + if (!property) {
>> + DRM_ERROR("failed to get property.\n");
>> + return -EINVAL;
>> + }
>> +
>> + ret = gsc_check_prepare(ctx);
>> + if (ret) {
>> + dev_err(dev, "failed to check prepare.\n");
>> + return ret;
>> + }
>
> Please remove.
- removed it. please see the v4 patch
>
>> +
>> + gsc_handle_irq(ctx, true, false, true);
>> +
>> + /* ToDo: window size, prescaler config */
>
> Please remove comment.
- done.
>
>> + for_each_ipp_ops(i) {
>> + config = &property->config[i];
>> + img_pos[i] = config->pos;
>> + }
>> +
>> + switch (cmd) {
>> + case IPP_CMD_M2M:
>> + /* enable one shot */
>> + cfg = gsc_read(GSC_ENABLE);
>> + cfg &= ~(GSC_ENABLE_ON_CLEAR_MASK |
>> + GSC_ENABLE_CLK_GATE_MODE_MASK);
>> + cfg |= GSC_ENABLE_ON_CLEAR_ONESHOT;
>> + gsc_write(cfg, GSC_ENABLE);
>> +
>> + /* src dma memory */
>> + cfg = gsc_read(GSC_IN_CON);
>> + cfg &= ~(GSC_IN_PATH_MASK | GSC_IN_LOCAL_SEL_MASK);
>> + cfg |= GSC_IN_PATH_MEMORY;
>> + gsc_write(cfg, GSC_IN_CON);
>> +
>> + /* dst dma memory */
>> + cfg = gsc_read(GSC_OUT_CON);
>> + cfg |= GSC_OUT_PATH_MEMORY;
>> + gsc_write(cfg, GSC_OUT_CON);
>> + break;
>> + case IPP_CMD_WB:
>> + /* ToDo: need to replace the property structure. */
>> + set_wb.enable = 1;
>> + set_wb.refresh = property->refresh_rate;
>> + gsc_set_gscblk_fimd_wb(ctx, set_wb.enable);
>> + exynos_drm_ippnb_send_event(IPP_SET_WRITEBACK, (void *)&set_wb);
>> +
>> + /* src local path */
>> + cfg = readl(GSC_IN_CON);
>> + cfg &= ~(GSC_IN_PATH_MASK | GSC_IN_LOCAL_SEL_MASK);
>> + cfg |= (GSC_IN_PATH_LOCAL | GSC_IN_LOCAL_FIMD_WB);
>> + gsc_write(cfg, GSC_IN_CON);
>> +
>> + /* dst dma memory */
>> + cfg = gsc_read(GSC_OUT_CON);
>> + cfg |= GSC_OUT_PATH_MEMORY;
>> + gsc_write(cfg, GSC_OUT_CON);
>> + break;
>> + case IPP_CMD_OUTPUT:
>> + /* src dma memory */
>> + cfg = gsc_read(GSC_IN_CON);
>> + cfg &= ~(GSC_IN_PATH_MASK | GSC_IN_LOCAL_SEL_MASK);
>> + cfg |= GSC_IN_PATH_MEMORY;
>> + gsc_write(cfg, GSC_IN_CON);
>> +
>> + /* dst local path */
>> + cfg = gsc_read(GSC_OUT_CON);
>> + cfg |= GSC_OUT_PATH_MEMORY;
>> + gsc_write(cfg, GSC_OUT_CON);
>> + break;
>> + default:
>> + ret = -EINVAL;
>> + dev_err(dev, "invalid operations.\n");
>> + return ret;
>> + }
>> +
>> + ret = gsc_set_prescaler(ctx, &ctx->sc,
>> + &img_pos[EXYNOS_DRM_OPS_SRC],
>> + &img_pos[EXYNOS_DRM_OPS_DST]);
>> + if (ret) {
>> + dev_err(dev, "failed to set precalser.\n");
>> + return ret;
>> + }
>> +
>> + gsc_set_scaler(ctx, &ctx->sc);
>> +
>> + cfg = gsc_read(GSC_ENABLE);
>> + cfg |= GSC_ENABLE_ON;
>> + gsc_write(cfg, GSC_ENABLE);
>> +
>> + return 0;
>> +}
>> +
>> +static void gsc_ippdrv_stop(struct device *dev, enum
>> drm_exynos_ipp_cmd cmd)
>> +{
>> + struct gsc_context *ctx = get_gsc_context(dev);
>> + struct drm_exynos_ipp_set_wb set_wb = {0, 0};
>> + u32 cfg;
>> +
>> + DRM_DEBUG_KMS("%s:cmd[%d]\n", __func__, cmd);
>> +
>> + switch (cmd) {
>> + case IPP_CMD_M2M:
>> + /* bypass */
>> + break;
>> + case IPP_CMD_WB:
>> + gsc_set_gscblk_fimd_wb(ctx, set_wb.enable);
>> + exynos_drm_ippnb_send_event(IPP_SET_WRITEBACK, (void *)&set_wb);
>> + break;
>> + case IPP_CMD_OUTPUT:
>> + default:
>> + dev_err(dev, "invalid operations.\n");
>> + break;
>> + }
>> +
>> + gsc_handle_irq(ctx, false, false, true);
>> +
>> + /* reset sequence */
>> + gsc_write(0xff, GSC_OUT_BASE_ADDR_Y_MASK);
>> + gsc_write(0xff, GSC_OUT_BASE_ADDR_CB_MASK);
>> + gsc_write(0xff, GSC_OUT_BASE_ADDR_CR_MASK);
>> +
>> + cfg = gsc_read(GSC_ENABLE);
>> + cfg &= ~GSC_ENABLE_ON;
>> + gsc_write(cfg, GSC_ENABLE);
>> +}
>> +
>> +static int __devinit gsc_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct gsc_context *ctx;
>> + struct resource *res;
>> + struct exynos_drm_ippdrv *ippdrv;
>> + int ret;
>> +
>> + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
>> + if (!ctx)
>> + return -ENOMEM;
>> +
>> + /* clock control */
>> + ctx->gsc_clk = clk_get(dev, "gscl");
>> + if (IS_ERR(ctx->gsc_clk)) {
>> + dev_err(dev, "failed to get gsc clock.\n");
>> + ret = PTR_ERR(ctx->gsc_clk);
>> + goto err_ctx;
>> + }
>> +
>> + ctx->parent_clk = clk_get(NULL, "aclk_300_gscl");
>> + if (IS_ERR(ctx->parent_clk)) {
>> + dev_err(dev, "failed to get parent clock.\n");
>> + ret = PTR_ERR(ctx->parent_clk);
>> + clk_put(ctx->gsc_clk);
>> + goto err_ctx;
>> + }
>> +
>> + ctx->child_clk = clk_get(NULL, "dout_aclk_300_gscl");
>> + if (IS_ERR(ctx->child_clk)) {
>> + dev_err(dev, "failed to get child clock.\n");
>> + ret = PTR_ERR(ctx->child_clk);
>> + clk_put(ctx->gsc_clk);
>> + clk_put(ctx->parent_clk);
>> + goto err_ctx;
>> + }
>
> Why do these clocks need? Please don't decide specific clock source in
> driver.
- we need to parent clk, child clk link at this point if we enable GSC
block.
>
>> +
>> + /* resource memory */
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + if (!res) {
>> + dev_err(dev, "failed to find registers.\n");
>> + ret = -ENOENT;
>> + goto err_clk;
>> + }
>> +
>> + ctx->regs_res = request_mem_region(res->start, resource_size(res),
>> + dev_name(dev));
>> + if (!ctx->regs_res) {
>> + dev_err(dev, "failed to claim register region.\n");
>> + ret = -ENOENT;
>> + goto err_clk;
>> + }
>> +
>> + ctx->regs = ioremap(res->start, resource_size(res));
>> + if (!ctx->regs) {
>> + dev_err(dev, "failed to map registers.\n");
>> + ret = -ENXIO;
>> + goto err_req_region;
>> + }
>
> Use devm_request_and_ioremap()
- Why request devm_request_and_ioremap() in this patch.
I think Exynos DRM module not changed devm_ at current.
so, I think this patch merge at first.
and changed it about all Exynos DRM drivers. I think that is better.
>
>> +
>> + /* resource irq */
>> + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
>> + if (!res) {
>> + dev_err(dev, "failed to request irq resource.\n");
>> + ret = -ENOENT;
>> + goto err_get_regs;
>> + }
>> +
>> + ctx->irq = res->start;
>> + ret = request_threaded_irq(ctx->irq, NULL, gsc_irq_handler,
>> + IRQF_ONESHOT, "drm_gsc", ctx);
>
> Use devm_request_irq
- ditto.
>
>> + if (ret < 0) {
>> + dev_err(dev, "failed to request irq.\n");
>> + goto err_get_regs;
>> + }
>> +
>> + /* context initailization */
>> + ctx->id = pdev->id;
>> +
>> + ippdrv = &ctx->ippdrv;
>> + ippdrv->dev = dev;
>> + ippdrv->ops[EXYNOS_DRM_OPS_SRC] = &gsc_src_ops;
>> + ippdrv->ops[EXYNOS_DRM_OPS_DST] = &gsc_dst_ops;
>> + ippdrv->check_property = gsc_ippdrv_check_property;
>> + ippdrv->reset = gsc_ippdrv_reset;
>> + ippdrv->start = gsc_ippdrv_start;
>> + ippdrv->stop = gsc_ippdrv_stop;
>> + ret = gsc_init_prop_list(ippdrv);
>> + if (ret < 0) {
>> + dev_err(dev, "failed to init property list.\n");
>> + goto err_get_irq;
>> + }
>> +
>> + DRM_DEBUG_KMS("%s:id[%d]ippdrv[0x%x]\n", __func__, ctx->id,
>> + (int)ippdrv);
>> +
>> + mutex_init(&ctx->lock);
>> + platform_set_drvdata(pdev, ctx);
>> +
>> + pm_runtime_set_active(dev);
>> + pm_runtime_enable(dev);
>> +
>> + ret = exynos_drm_ippdrv_register(ippdrv);
>> + if (ret < 0) {
>> + dev_err(dev, "failed to register drm gsc device.\n");
>> + goto err_ippdrv_register;
>> + }
>> +
>> + dev_info(&pdev->dev, "drm gsc registered successfully.\n");
>> +
>> + return 0;
>> +
>> +err_ippdrv_register:
>> + kfree(ippdrv->prop_list);
>> + pm_runtime_disable(dev);
>> + free_irq(ctx->irq, ctx);
>> +err_get_irq:
>> + free_irq(ctx->irq, ctx);
>> +err_get_regs:
>> + iounmap(ctx->regs);
>> +err_req_region:
>> + release_resource(ctx->regs_res);
>> + kfree(ctx->regs_res);
>> +err_clk:
>> + clk_put(ctx->child_clk);
>> + clk_put(ctx->parent_clk);
>> + clk_put(ctx->gsc_clk);
>> +err_ctx:
>> + kfree(ctx);
>> + return ret;
>> +}
>> +
>> +static int __devexit gsc_remove(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct gsc_context *ctx = get_gsc_context(dev);
>> + struct exynos_drm_ippdrv *ippdrv = &ctx->ippdrv;
>> +
>> + kfree(ippdrv->prop_list);
>> + exynos_drm_ippdrv_unregister(ippdrv);
>> + mutex_destroy(&ctx->lock);
>> +
>> + pm_runtime_set_suspended(dev);
>> + pm_runtime_disable(dev);
>> +
>> + free_irq(ctx->irq, ctx);
>> + iounmap(ctx->regs);
>> + release_resource(ctx->regs_res);
>> + kfree(ctx->regs_res);
>> +
>> + clk_put(ctx->child_clk);
>> + clk_put(ctx->parent_clk);
>> + clk_put(ctx->gsc_clk);
>> +
>> + kfree(ctx);
>> +
>> + return 0;
>> +}
>> +
>> +#ifdef CONFIG_PM_SLEEP
>> +static int gsc_suspend(struct device *dev)
>> +{
>> + struct gsc_context *ctx = get_gsc_context(dev);
>> +
>> + /* ToDo */
>
> Remove.
- Why? you request to me about above to top.
so, I moved it. TODO needed
>
>> +
>> + DRM_DEBUG_KMS("%s:id[%d]\n", __func__, ctx->id);
>> +
>> + if (pm_runtime_suspended(dev))
>> + return 0;
>> +
>> + return gsc_clk_ctrl(ctx, false);
>> +}
>> +
>> +static int gsc_resume(struct device *dev)
>> +{
>> + struct gsc_context *ctx = get_gsc_context(dev);
>> +
>> + /* ToDo */
>
> Ditto.
- ditto.
>
>> +
>> + DRM_DEBUG_KMS("%s:id[%d]\n", __func__, ctx->id);
>> +
>> + if (!pm_runtime_suspended(dev))
>> + return gsc_clk_ctrl(ctx, true);
>> +
>> + return 0;
>> +}
>> +#endif
>> +
>> +#ifdef CONFIG_PM_RUNTIME
>> +static int gsc_runtime_suspend(struct device *dev)
>> +{
>> + struct gsc_context *ctx = get_gsc_context(dev);
>> +
>> + /* ToDo */
>
> Ditto.
- ditto.
>
>> +
>> + DRM_DEBUG_KMS("%s:id[%d]\n", __func__, ctx->id);
>> +
>> + return gsc_clk_ctrl(ctx, false);
>> +}
>> +
>> +static int gsc_runtime_resume(struct device *dev)
>> +{
>> + struct gsc_context *ctx = get_gsc_context(dev);
>> +
>> + /* ToDo */
>
> Ditto.
- ditto.
>
>> +
>> + DRM_DEBUG_KMS("%s:id[%d]\n", __FILE__, ctx->id);
>> +
>> + return gsc_clk_ctrl(ctx, true);
>
> If runtime PM isn't enabled, how do you control clock?
- Good point. hmm ~ what is standard ? please recommand your knowledge
to me.
>
>> +}
>> +#endif
>> +
>> +static const struct dev_pm_ops gsc_pm_ops = {
>> + SET_SYSTEM_SLEEP_PM_OPS(gsc_suspend, gsc_resume)
>> + SET_RUNTIME_PM_OPS(gsc_runtime_suspend, gsc_runtime_resume, NULL)
>> +};
>> +
>> +/* ToDo: need to check use case platform_device_id */
>
> Use "TODO" instead of "ToDo".
- removed it.
>
>> +struct platform_driver gsc_driver = {
>> + .probe = gsc_probe,
>> + .remove = __devexit_p(gsc_remove),
>> + .driver = {
>> + .name = "exynos-drm-gsc",
>> + .owner = THIS_MODULE,
>> + .pm = &gsc_pm_ops,
>> + },
>> +};
>> +
>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_gsc.h
>> b/drivers/gpu/drm/exynos/exynos_drm_gsc.h
>> new file mode 100644
>> index 0000000..b3ef7a0
>> --- /dev/null
>> +++ b/drivers/gpu/drm/exynos/exynos_drm_gsc.h
>> @@ -0,0 +1,34 @@
>> +/*
>> + * Copyright (c) 2012 Samsung Electronics Co., Ltd.
>> + *
>> + * Authors:
>> + * Eunchul Kim <chulspro.kim at samsung.com>
>> + * Jinyoung Jeon <jy0.jeon at samsung.com>
>> + * Sangmin Lee <lsmin.lee at samsung.com>
>> + *
>> + * Permission is hereby granted, free of charge, to any person
>> obtaining a
>> + * copy of this software and associated documentation files (the
>> "Software"),
>> + * to deal in the Software without restriction, including without
>> limitation
>> + * the rights to use, copy, modify, merge, publish, distribute,
>> sublicense,
>> + * and/or sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following conditions:
>> + *
>> + * The above copyright notice and this permission notice (including
>> the next
>> + * paragraph) shall be included in all copies or substantial portions
>> of the
>> + * Software.
>> + *
>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> EXPRESS OR
>> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
>> MERCHANTABILITY,
>> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
>> SHALL
>> + * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
>> DAMAGES OR
>> + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
>> + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> + */
>> +
>> +#ifndef _EXYNOS_DRM_GSC_H_
>> +#define _EXYNOS_DRM_GSC_H_
>> +
>> +/* ToDo */
>> +
>
> Please remove this dummy header file.
- I want to finish file creation in this patch.
We need to link with MIxer so, I prepared it.
>
>> +#endif /* _EXYNOS_DRM_GSC_H_ */
>> diff --git a/drivers/gpu/drm/exynos/regs-gsc.h
>> b/drivers/gpu/drm/exynos/regs-gsc.h
>> new file mode 100644
>> index 0000000..ed297b5
>> --- /dev/null
>> +++ b/drivers/gpu/drm/exynos/regs-gsc.h
>> @@ -0,0 +1,295 @@
>> +/* linux/drivers/gpu/drm/exynos/regs-gsc.h
>> + *
>> + * Copyright (c) 2012 Samsung Electronics Co., Ltd.
>> + * http://www.samsung.com
>> + *
>> + * Register definition file for Samsung G-Scaler driver
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#ifndef EXYNOS_REGS_GSC_H_
>> +#define EXYNOS_REGS_GSC_H_
>> +
>> +/* SYSCON. GSCBLK_CFG */
>> +#include <plat/map-base.h>
>> +#include <plat/cpu.h>
>> +#define SYSREG_DISP1BLK_CFG (S3C_VA_SYS + 0x0214)
>> +#define FIFORST_DISP1 (1 << 23)
>> +#define GSC_OUT_MIXER0 (1 << 7)
>> +#define GSC_OUT_MIXER0_GSC3 (3 << 5)
>> +#define SYSREG_GSCBLK_CFG0 (S3C_VA_SYS + 0x0220)
>> +#define GSC_OUT_DST_FIMD_SEL(x) (1 << (8 + 2 * (x)))
>> +#define GSC_OUT_DST_MXR_SEL(x) (2 << (8 + 2 * (x)))
>> +#define GSC_PXLASYNC_RST(x) (1 << (x))
>> +#define PXLASYNC_LO_MASK_CAMIF_TOP (1 << 20)
>> +#define SYSREG_GSCBLK_CFG1 (S3C_VA_SYS + 0x0224)
>> +#define GSC_BLK_DISP1WB_DEST(x) (x << 10)
>> +#define GSC_BLK_SW_RESET_WB_DEST(x) (1 << (18 + x))
>> +#define GSC_BLK_PXLASYNC_LO_MASK_WB(x) (0 << (14 + x))
>> +#define GSC_BLK_GSCL_WB_IN_SRC_SEL(x) (1 << (2 * x))
>> +#define SYSREG_GSCBLK_CFG2 (S3C_VA_SYS + 0x2000)
>> +#define PXLASYNC_LO_MASK_CAMIF_GSCL(x) (1 << (x))
>> +
>> +/* G-Scaler enable */
>> +#define GSC_ENABLE 0x00
>> +#define GSC_ENABLE_PP_UPDATE_TIME_MASK (1 << 9)
>> +#define GSC_ENABLE_PP_UPDATE_TIME_CURR (0 << 9)
>> +#define GSC_ENABLE_PP_UPDATE_TIME_EOPAS (1 << 9)
>> +#define GSC_ENABLE_CLK_GATE_MODE_MASK (1 << 8)
>> +#define GSC_ENABLE_CLK_GATE_MODE_FREE (1 << 8)
>> +#define GSC_ENABLE_IPC_MODE_MASK (1 << 7)
>> +#define GSC_ENABLE_NORM_MODE (0 << 7)
>> +#define GSC_ENABLE_IPC_MODE (1 << 7)
>> +#define GSC_ENABLE_PP_UPDATE_MODE_MASK (1 << 6)
>> +#define GSC_ENABLE_PP_UPDATE_FIRE_MODE (1 << 6)
>> +#define GSC_ENABLE_IN_PP_UPDATE (1 << 5)
>> +#define GSC_ENABLE_ON_CLEAR_MASK (1 << 4)
>> +#define GSC_ENABLE_ON_CLEAR_ONESHOT (1 << 4)
>> +#define GSC_ENABLE_QOS_ENABLE (1 << 3)
>> +#define GSC_ENABLE_OP_STATUS (1 << 2)
>> +#define GSC_ENABLE_SFR_UPDATE (1 << 1)
>> +#define GSC_ENABLE_ON (1 << 0)
>> +
>> +/* G-Scaler S/W reset */
>> +#define GSC_SW_RESET 0x04
>> +#define GSC_SW_RESET_SRESET (1 << 0)
>> +
>> +/* G-Scaler IRQ */
>> +#define GSC_IRQ 0x08
>> +#define GSC_IRQ_STATUS_OR_IRQ (1 << 17)
>> +#define GSC_IRQ_STATUS_OR_FRM_DONE (1 << 16)
>> +#define GSC_IRQ_OR_MASK (1 << 2)
>> +#define GSC_IRQ_FRMDONE_MASK (1 << 1)
>> +#define GSC_IRQ_ENABLE (1 << 0)
>> +
>> +/* G-Scaler input control */
>> +#define GSC_IN_CON 0x10
>> +#define GSC_IN_CHROM_STRIDE_SEL_MASK (1 << 20)
>> +#define GSC_IN_CHROM_STRIDE_SEPAR (1 << 20)
>> +#define GSC_IN_RB_SWAP_MASK (1 << 19)
>> +#define GSC_IN_RB_SWAP (1 << 19)
>> +#define GSC_IN_ROT_MASK (7 << 16)
>> +#define GSC_IN_ROT_270 (7 << 16)
>> +#define GSC_IN_ROT_90_YFLIP (6 << 16)
>> +#define GSC_IN_ROT_90_XFLIP (5 << 16)
>> +#define GSC_IN_ROT_90 (4 << 16)
>> +#define GSC_IN_ROT_180 (3 << 16)
>> +#define GSC_IN_ROT_YFLIP (2 << 16)
>> +#define GSC_IN_ROT_XFLIP (1 << 16)
>> +#define GSC_IN_RGB_TYPE_MASK (3 << 14)
>> +#define GSC_IN_RGB_HD_WIDE (3 << 14)
>> +#define GSC_IN_RGB_HD_NARROW (2 << 14)
>> +#define GSC_IN_RGB_SD_WIDE (1 << 14)
>> +#define GSC_IN_RGB_SD_NARROW (0 << 14)
>> +#define GSC_IN_YUV422_1P_ORDER_MASK (1 << 13)
>> +#define GSC_IN_YUV422_1P_ORDER_LSB_Y (0 << 13)
>> +#define GSC_IN_YUV422_1P_OEDER_LSB_C (1 << 13)
>> +#define GSC_IN_CHROMA_ORDER_MASK (1 << 12)
>> +#define GSC_IN_CHROMA_ORDER_CBCR (0 << 12)
>> +#define GSC_IN_CHROMA_ORDER_CRCB (1 << 12)
>> +#define GSC_IN_FORMAT_MASK (7 << 8)
>> +#define GSC_IN_XRGB8888 (0 << 8)
>> +#define GSC_IN_RGB565 (1 << 8)
>> +#define GSC_IN_YUV420_2P (2 << 8)
>> +#define GSC_IN_YUV420_3P (3 << 8)
>> +#define GSC_IN_YUV422_1P (4 << 8)
>> +#define GSC_IN_YUV422_2P (5 << 8)
>> +#define GSC_IN_YUV422_3P (6 << 8)
>> +#define GSC_IN_TILE_TYPE_MASK (1 << 4)
>> +#define GSC_IN_TILE_C_16x8 (0 << 4)
>> +#define GSC_IN_TILE_C_16x16 (1 << 4)
>> +#define GSC_IN_TILE_MODE (1 << 3)
>> +#define GSC_IN_LOCAL_SEL_MASK (3 << 1)
>> +#define GSC_IN_LOCAL_CAM3 (3 << 1)
>> +#define GSC_IN_LOCAL_FIMD_WB (2 << 1)
>> +#define GSC_IN_LOCAL_CAM1 (1 << 1)
>> +#define GSC_IN_LOCAL_CAM0 (0 << 1)
>> +#define GSC_IN_PATH_MASK (1 << 0)
>> +#define GSC_IN_PATH_LOCAL (1 << 0)
>> +#define GSC_IN_PATH_MEMORY (0 << 0)
>> +
>> +/* G-Scaler source image size */
>> +#define GSC_SRCIMG_SIZE 0x14
>> +#define GSC_SRCIMG_HEIGHT_MASK (0x1fff << 16)
>> +#define GSC_SRCIMG_HEIGHT(x) ((x) << 16)
>> +#define GSC_SRCIMG_WIDTH_MASK (0x3fff << 0)
>> +#define GSC_SRCIMG_WIDTH(x) ((x) << 0)
>> +
>> +/* G-Scaler source image offset */
>> +#define GSC_SRCIMG_OFFSET 0x18
>> +#define GSC_SRCIMG_OFFSET_Y_MASK (0x1fff << 16)
>> +#define GSC_SRCIMG_OFFSET_Y(x) ((x) << 16)
>> +#define GSC_SRCIMG_OFFSET_X_MASK (0x1fff << 0)
>> +#define GSC_SRCIMG_OFFSET_X(x) ((x) << 0)
>> +
>> +/* G-Scaler cropped source image size */
>> +#define GSC_CROPPED_SIZE 0x1C
>> +#define GSC_CROPPED_HEIGHT_MASK (0x1fff << 16)
>> +#define GSC_CROPPED_HEIGHT(x) ((x) << 16)
>> +#define GSC_CROPPED_WIDTH_MASK (0x1fff << 0)
>> +#define GSC_CROPPED_WIDTH(x) ((x) << 0)
>> +
>> +/* G-Scaler output control */
>> +#define GSC_OUT_CON 0x20
>> +#define GSC_OUT_GLOBAL_ALPHA_MASK (0xff << 24)
>> +#define GSC_OUT_GLOBAL_ALPHA(x) ((x) << 24)
>> +#define GSC_OUT_CHROM_STRIDE_SEL_MASK (1 << 13)
>> +#define GSC_OUT_CHROM_STRIDE_SEPAR (1 << 13)
>> +#define GSC_OUT_RB_SWAP_MASK (1 << 12)
>> +#define GSC_OUT_RB_SWAP (1 << 12)
>> +#define GSC_OUT_RGB_TYPE_MASK (3 << 10)
>> +#define GSC_OUT_RGB_HD_NARROW (3 << 10)
>> +#define GSC_OUT_RGB_HD_WIDE (2 << 10)
>> +#define GSC_OUT_RGB_SD_NARROW (1 << 10)
>> +#define GSC_OUT_RGB_SD_WIDE (0 << 10)
>> +#define GSC_OUT_YUV422_1P_ORDER_MASK (1 << 9)
>> +#define GSC_OUT_YUV422_1P_ORDER_LSB_Y (0 << 9)
>> +#define GSC_OUT_YUV422_1P_OEDER_LSB_C (1 << 9)
>> +#define GSC_OUT_CHROMA_ORDER_MASK (1 << 8)
>> +#define GSC_OUT_CHROMA_ORDER_CBCR (0 << 8)
>> +#define GSC_OUT_CHROMA_ORDER_CRCB (1 << 8)
>> +#define GSC_OUT_FORMAT_MASK (7 << 4)
>> +#define GSC_OUT_XRGB8888 (0 << 4)
>> +#define GSC_OUT_RGB565 (1 << 4)
>> +#define GSC_OUT_YUV420_2P (2 << 4)
>> +#define GSC_OUT_YUV420_3P (3 << 4)
>> +#define GSC_OUT_YUV422_1P (4 << 4)
>> +#define GSC_OUT_YUV422_2P (5 << 4)
>> +#define GSC_OUT_YUV444 (7 << 4)
>> +#define GSC_OUT_TILE_TYPE_MASK (1 << 2)
>> +#define GSC_OUT_TILE_C_16x8 (0 << 2)
>> +#define GSC_OUT_TILE_C_16x16 (1 << 2)
>> +#define GSC_OUT_TILE_MODE (1 << 1)
>> +#define GSC_OUT_PATH_MASK (1 << 0)
>> +#define GSC_OUT_PATH_LOCAL (1 << 0)
>> +#define GSC_OUT_PATH_MEMORY (0 << 0)
>> +
>> +/* G-Scaler scaled destination image size */
>> +#define GSC_SCALED_SIZE 0x24
>> +#define GSC_SCALED_HEIGHT_MASK (0x1fff << 16)
>> +#define GSC_SCALED_HEIGHT(x) ((x) << 16)
>> +#define GSC_SCALED_WIDTH_MASK (0x1fff << 0)
>> +#define GSC_SCALED_WIDTH(x) ((x) << 0)
>> +
>> +/* G-Scaler pre scale ratio */
>> +#define GSC_PRE_SCALE_RATIO 0x28
>> +#define GSC_PRESC_SHFACTOR_MASK (7 << 28)
>> +#define GSC_PRESC_SHFACTOR(x) ((x) << 28)
>> +#define GSC_PRESC_V_RATIO_MASK (7 << 16)
>> +#define GSC_PRESC_V_RATIO(x) ((x) << 16)
>> +#define GSC_PRESC_H_RATIO_MASK (7 << 0)
>> +#define GSC_PRESC_H_RATIO(x) ((x) << 0)
>> +
>> +/* G-Scaler main scale horizontal ratio */
>> +#define GSC_MAIN_H_RATIO 0x2C
>> +#define GSC_MAIN_H_RATIO_MASK (0xfffff << 0)
>> +#define GSC_MAIN_H_RATIO_VALUE(x) ((x) << 0)
>> +
>> +/* G-Scaler main scale vertical ratio */
>> +#define GSC_MAIN_V_RATIO 0x30
>> +#define GSC_MAIN_V_RATIO_MASK (0xfffff << 0)
>> +#define GSC_MAIN_V_RATIO_VALUE(x) ((x) << 0)
>> +
>> +/* G-Scaler input chrominance stride */
>> +#define GSC_IN_CHROM_STRIDE 0x3C
>> +#define GSC_IN_CHROM_STRIDE_MASK (0x3fff << 0)
>> +#define GSC_IN_CHROM_STRIDE_VALUE(x) ((x) << 0)
>> +
>> +/* G-Scaler destination image size */
>> +#define GSC_DSTIMG_SIZE 0x40
>> +#define GSC_DSTIMG_HEIGHT_MASK (0x1fff << 16)
>> +#define GSC_DSTIMG_HEIGHT(x) ((x) << 16)
>> +#define GSC_DSTIMG_WIDTH_MASK (0x1fff << 0)
>> +#define GSC_DSTIMG_WIDTH(x) ((x) << 0)
>> +
>> +/* G-Scaler destination image offset */
>> +#define GSC_DSTIMG_OFFSET 0x44
>> +#define GSC_DSTIMG_OFFSET_Y_MASK (0x1fff << 16)
>> +#define GSC_DSTIMG_OFFSET_Y(x) ((x) << 16)
>> +#define GSC_DSTIMG_OFFSET_X_MASK (0x1fff << 0)
>> +#define GSC_DSTIMG_OFFSET_X(x) ((x) << 0)
>> +
>> +/* G-Scaler output chrominance stride */
>> +#define GSC_OUT_CHROM_STRIDE 0x48
>> +#define GSC_OUT_CHROM_STRIDE_MASK (0x3fff << 0)
>> +#define GSC_OUT_CHROM_STRIDE_VALUE(x) ((x) << 0)
>> +
>> +/* G-Scaler input y address mask */
>> +#define GSC_IN_BASE_ADDR_Y_MASK 0x4C
>> +/* G-Scaler input y base address */
>> +#define GSC_IN_BASE_ADDR_Y(n) (0x50 + (n) * 0x4)
>> +/* G-Scaler input y base current address */
>> +#define GSC_IN_BASE_ADDR_Y_CUR(n) (0x60 + (n) * 0x4)
>> +
>> +/* G-Scaler input cb address mask */
>> +#define GSC_IN_BASE_ADDR_CB_MASK 0x7C
>> +/* G-Scaler input cb base address */
>> +#define GSC_IN_BASE_ADDR_CB(n) (0x80 + (n) * 0x4)
>> +/* G-Scaler input cb base current address */
>> +#define GSC_IN_BASE_ADDR_CB_CUR(n) (0x90 + (n) * 0x4)
>> +
>> +/* G-Scaler input cr address mask */
>> +#define GSC_IN_BASE_ADDR_CR_MASK 0xAC
>> +/* G-Scaler input cr base address */
>> +#define GSC_IN_BASE_ADDR_CR(n) (0xB0 + (n) * 0x4)
>> +/* G-Scaler input cr base current address */
>> +#define GSC_IN_BASE_ADDR_CR_CUR(n) (0xC0 + (n) * 0x4)
>> +
>> +/* G-Scaler input address mask */
>> +#define GSC_IN_CURR_ADDR_INDEX (0xf << 24)
>> +#define GSC_IN_CURR_GET_INDEX(x) ((x) >> 24)
>> +#define GSC_IN_BASE_ADDR_PINGPONG(x) ((x) << 16)
>> +#define GSC_IN_BASE_ADDR_MASK (0xff << 0)
>> +
>> +/* G-Scaler output y address mask */
>> +#define GSC_OUT_BASE_ADDR_Y_MASK 0x10C
>> +/* G-Scaler output y base address */
>> +#define GSC_OUT_BASE_ADDR_Y(n) (0x110 + (n) * 0x4)
>> +
>> +/* G-Scaler output cb address mask */
>> +#define GSC_OUT_BASE_ADDR_CB_MASK 0x15C
>> +/* G-Scaler output cb base address */
>> +#define GSC_OUT_BASE_ADDR_CB(n) (0x160 + (n) * 0x4)
>> +
>> +/* G-Scaler output cr address mask */
>> +#define GSC_OUT_BASE_ADDR_CR_MASK 0x1AC
>> +/* G-Scaler output cr base address */
>> +#define GSC_OUT_BASE_ADDR_CR(n) (0x1B0 + (n) * 0x4)
>> +
>> +/* G-Scaler output address mask */
>> +#define GSC_OUT_CURR_ADDR_INDEX (0xf << 24)
>> +#define GSC_OUT_CURR_GET_INDEX(x) ((x) >> 24)
>> +#define GSC_OUT_BASE_ADDR_PINGPONG(x) ((x) << 16)
>> +#define GSC_OUT_BASE_ADDR_MASK (0xffff << 0)
>> +
>> +/* G-Scaler horizontal scaling filter */
>> +#define GSC_HCOEF(n, s, x) (0x300 + (n) * 0x4 + (s) * 0x30 + (x) *
>> 0x300)
>> +
>> +/* G-Scaler vertical scaling filter */
>> +#define GSC_VCOEF(n, s, x) (0x200 + (n) * 0x4 + (s) * 0x30 + (x) *
>> 0x300)
>> +
>> +/* G-Scaler BUS control */
>> +#define GSC_BUSCON 0xA78
>> +#define GSC_BUSCON_INT_TIME_MASK (1 << 8)
>> +#define GSC_BUSCON_INT_DATA_TRANS (0 << 8)
>> +#define GSC_BUSCON_INT_AXI_RESPONSE (1 << 8)
>> +#define GSC_BUSCON_AWCACHE(x) ((x) << 4)
>> +#define GSC_BUSCON_ARCACHE(x) ((x) << 0)
>> +
>> +/* G-Scaler V position */
>> +#define GSC_VPOSITION 0xA7C
>> +#define GSC_VPOS_F(x) ((x) << 0)
>> +
>> +
>> +/* G-Scaler clock initial count */
>> +#define GSC_CLK_INIT_COUNT 0xC00
>> +#define GSC_CLK_GATE_MODE_INIT_CNT(x) ((x) << 0)
>> +
>> +/* G-Scaler clock snoop count */
>> +#define GSC_CLK_SNOOP_COUNT 0xC04
>> +#define GSC_CLK_GATE_MODE_SNOOP_CNT(x) ((x) << 0)
>> +
>> +#endif /* EXYNOS_REGS_GSC_H_ */
>
>
More information about the dri-devel
mailing list