[PATCH 04/10] drm/exynos: Use devm_clk_get in exynos_drm_fimc.c
Sachin Kamat
sachin.kamat at linaro.org
Wed Dec 26 05:22:01 PST 2012
On Wednesday, 26 December 2012, Inki Dae <inki.dae at samsung.com> wrote:
>
>
> 2012/12/24 Sachin Kamat <sachin.kamat at linaro.org>
>>
>> This eliminates the need for explicit clk_put and makes the
>> cleanup and exit path code simpler.
>>
>> Cc: Eunchul Kim <chulspro.kim at samsung.com>
>> Signed-off-by: Sachin Kamat <sachin.kamat at linaro.org>
>> ---
>> drivers/gpu/drm/exynos/exynos_drm_fimc.c | 46
++++++-----------------------
>> 1 files changed, 10 insertions(+), 36 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimc.c
b/drivers/gpu/drm/exynos/exynos_drm_fimc.c
>> index 972aa70..c4006b8 100644
>> --- a/drivers/gpu/drm/exynos/exynos_drm_fimc.c
>> +++ b/drivers/gpu/drm/exynos/exynos_drm_fimc.c
>> @@ -1739,64 +1739,50 @@ static int __devinit fimc_probe(struct
platform_device *pdev)
>> platform_get_device_id(pdev)->driver_data;
>>
>> /* clock control */
>> - ctx->sclk_fimc_clk = clk_get(dev, "sclk_fimc");
>> + ctx->sclk_fimc_clk = devm_clk_get(dev, "sclk_fimc");
>> if (IS_ERR(ctx->sclk_fimc_clk)) {
>> dev_err(dev, "failed to get src fimc clock.\n");
>> return PTR_ERR(ctx->sclk_fimc_clk);
>> }
>> clk_enable(ctx->sclk_fimc_clk);
>>
>> - ctx->fimc_clk = clk_get(dev, "fimc");
>> + ctx->fimc_clk = devm_clk_get(dev, "fimc");
>> if (IS_ERR(ctx->fimc_clk)) {
>> dev_err(dev, "failed to get fimc clock.\n");
>> clk_disable(ctx->sclk_fimc_clk);
>> - clk_put(ctx->sclk_fimc_clk);
>> return PTR_ERR(ctx->fimc_clk);
>> }
>>
>> - ctx->wb_clk = clk_get(dev, "pxl_async0");
>> + ctx->wb_clk = devm_clk_get(dev, "pxl_async0");
>> if (IS_ERR(ctx->wb_clk)) {
>> dev_err(dev, "failed to get writeback a clock.\n");
>> clk_disable(ctx->sclk_fimc_clk);
>> - clk_put(ctx->sclk_fimc_clk);
>> - clk_put(ctx->fimc_clk);
>> return PTR_ERR(ctx->wb_clk);
>> }
>>
>> - ctx->wb_b_clk = clk_get(dev, "pxl_async1");
>> + ctx->wb_b_clk = devm_clk_get(dev, "pxl_async1");
>> if (IS_ERR(ctx->wb_b_clk)) {
>> dev_err(dev, "failed to get writeback b clock.\n");
>> clk_disable(ctx->sclk_fimc_clk);
>> - clk_put(ctx->sclk_fimc_clk);
>> - clk_put(ctx->fimc_clk);
>> - clk_put(ctx->wb_clk);
>> return PTR_ERR(ctx->wb_b_clk);
>> }
>>
>> - parent_clk = clk_get(dev, ddata->parent_clk);
>> + parent_clk = devm_clk_get(dev, ddata->parent_clk);
>>
>> if (IS_ERR(parent_clk)) {
>> dev_err(dev, "failed to get parent clock.\n");
>> clk_disable(ctx->sclk_fimc_clk);
>> - clk_put(ctx->sclk_fimc_clk);
>> - clk_put(ctx->fimc_clk);
>> - clk_put(ctx->wb_clk);
>> - clk_put(ctx->wb_b_clk);
>> return PTR_ERR(parent_clk);
>> }
>>
>> if (clk_set_parent(ctx->sclk_fimc_clk, parent_clk)) {
>> dev_err(dev, "failed to set parent.\n");
>> - clk_put(parent_clk);
>> + devm_clk_put(dev, parent_clk);
>
> remove the above call. is there any reason that devm_clk_put should be
called here?
Devm resources are freed/released automatically only when the device
detaches. In the above case the clock was released explicitly (for whatever
reasons) earlier. Hence i have used devm call to keep the code logic same
as i do not know the behavior if this clock is 'put' when the device
detaches instead of here.
>
>>
>> clk_disable(ctx->sclk_fimc_clk);
>> - clk_put(ctx->sclk_fimc_clk);
>> - clk_put(ctx->fimc_clk);
>> - clk_put(ctx->wb_clk);
>> - clk_put(ctx->wb_b_clk);
>> return -EINVAL;
>> }
>>
>> - clk_put(parent_clk);
>> + devm_clk_put(dev, parent_clk);
>
> ditto.
>
>>
>> clk_set_rate(ctx->sclk_fimc_clk, pdata->clk_rate);
>>
>> /* resource memory */
>> @@ -1804,16 +1790,14 @@ static int __devinit fimc_probe(struct
platform_device *pdev)
>> ctx->regs = devm_request_and_ioremap(dev, ctx->regs_res);
>> if (!ctx->regs) {
>> dev_err(dev, "failed to map registers.\n");
>> - ret = -ENXIO;
>> - goto err_clk;
>> + return -ENXIO;
>> }
>>
>> /* resource irq */
>> res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
>> if (!res) {
>> dev_err(dev, "failed to request irq resource.\n");
>> - ret = -ENOENT;
>> - goto err_clk;
>> + return -ENOENT;
>> }
>>
>> ctx->irq = res->start;
>> @@ -1821,7 +1805,7 @@ static int __devinit fimc_probe(struct
platform_device *pdev)
>> IRQF_ONESHOT, "drm_fimc", ctx);
>> if (ret < 0) {
>> dev_err(dev, "failed to request irq.\n");
>> - goto err_clk;
>> + return ret;
>> }
>>
>> /* context initailization */
>> @@ -1867,11 +1851,6 @@ err_ippdrv_register:
>> pm_runtime_disable(dev);
>> err_get_irq:
>> free_irq(ctx->irq, ctx);
>> -err_clk:
>> - clk_put(ctx->sclk_fimc_clk);
>> - clk_put(ctx->fimc_clk);
>> - clk_put(ctx->wb_clk);
>> - clk_put(ctx->wb_b_clk);
>>
>> return ret;
>> }
>> @@ -1891,11 +1870,6 @@ static int __devexit fimc_remove(struct
platform_device *pdev)
>>
>> free_irq(ctx->irq, ctx);
>>
>> - clk_put(ctx->sclk_fimc_clk);
>> - clk_put(ctx->fimc_clk);
>> - clk_put(ctx->wb_clk);
>> - clk_put(ctx->wb_b_clk);
>> -
>> return 0;
>> }
>>
>> --
>> 1.7.4.1
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel at lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/dri-devel
>
>
--
With warm regards,
Sachin
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/dri-devel/attachments/20121226/f8f07618/attachment.html>
More information about the dri-devel
mailing list