[PATCH 04/10] drm/exynos: Use devm_clk_get in exynos_drm_fimc.c
Inki Dae
inki.dae at samsung.com
Thu Dec 27 02:13:18 PST 2012
2012/12/26 Sachin Kamat <sachin.kamat at linaro.org>
>
>
> On Wednesday, 26 December 2012, Inki Dae <inki.dae at samsung.com> wrote:
> >
> >
> > 2012/12/24 Sachin Kamat <sachin.kamat at linaro.org>
> >>
> >> This eliminates the need for explicit clk_put and makes the
> >> cleanup and exit path code simpler.
> >>
> >> Cc: Eunchul Kim <chulspro.kim at samsung.com>
> >> Signed-off-by: Sachin Kamat <sachin.kamat at linaro.org>
> >> ---
> >> drivers/gpu/drm/exynos/exynos_drm_fimc.c | 46
> ++++++-----------------------
> >> 1 files changed, 10 insertions(+), 36 deletions(-)
> >>
> >> diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimc.c
> b/drivers/gpu/drm/exynos/exynos_drm_fimc.c
> >> index 972aa70..c4006b8 100644
> >> --- a/drivers/gpu/drm/exynos/exynos_drm_fimc.c
> >> +++ b/drivers/gpu/drm/exynos/exynos_drm_fimc.c
> >> @@ -1739,64 +1739,50 @@ static int __devinit fimc_probe(struct
> platform_device *pdev)
> >> platform_get_device_id(pdev)->driver_data;
> >>
> >> /* clock control */
> >> - ctx->sclk_fimc_clk = clk_get(dev, "sclk_fimc");
> >> + ctx->sclk_fimc_clk = devm_clk_get(dev, "sclk_fimc");
> >> if (IS_ERR(ctx->sclk_fimc_clk)) {
> >> dev_err(dev, "failed to get src fimc clock.\n");
> >> return PTR_ERR(ctx->sclk_fimc_clk);
> >> }
> >> clk_enable(ctx->sclk_fimc_clk);
> >>
> >> - ctx->fimc_clk = clk_get(dev, "fimc");
> >> + ctx->fimc_clk = devm_clk_get(dev, "fimc");
> >> if (IS_ERR(ctx->fimc_clk)) {
> >> dev_err(dev, "failed to get fimc clock.\n");
> >> clk_disable(ctx->sclk_fimc_clk);
> >> - clk_put(ctx->sclk_fimc_clk);
> >> return PTR_ERR(ctx->fimc_clk);
> >> }
> >>
> >> - ctx->wb_clk = clk_get(dev, "pxl_async0");
> >> + ctx->wb_clk = devm_clk_get(dev, "pxl_async0");
> >> if (IS_ERR(ctx->wb_clk)) {
> >> dev_err(dev, "failed to get writeback a clock.\n");
> >> clk_disable(ctx->sclk_fimc_clk);
> >> - clk_put(ctx->sclk_fimc_clk);
> >> - clk_put(ctx->fimc_clk);
> >> return PTR_ERR(ctx->wb_clk);
> >> }
> >>
> >> - ctx->wb_b_clk = clk_get(dev, "pxl_async1");
> >> + ctx->wb_b_clk = devm_clk_get(dev, "pxl_async1");
> >> if (IS_ERR(ctx->wb_b_clk)) {
> >> dev_err(dev, "failed to get writeback b clock.\n");
> >> clk_disable(ctx->sclk_fimc_clk);
> >> - clk_put(ctx->sclk_fimc_clk);
> >> - clk_put(ctx->fimc_clk);
> >> - clk_put(ctx->wb_clk);
> >> return PTR_ERR(ctx->wb_b_clk);
> >> }
> >>
> >> - parent_clk = clk_get(dev, ddata->parent_clk);
> >> + parent_clk = devm_clk_get(dev, ddata->parent_clk);
> >>
> >> if (IS_ERR(parent_clk)) {
> >> dev_err(dev, "failed to get parent clock.\n");
> >> clk_disable(ctx->sclk_fimc_clk);
> >> - clk_put(ctx->sclk_fimc_clk);
> >> - clk_put(ctx->fimc_clk);
> >> - clk_put(ctx->wb_clk);
> >> - clk_put(ctx->wb_b_clk);
> >> return PTR_ERR(parent_clk);
> >> }
> >>
> >> if (clk_set_parent(ctx->sclk_fimc_clk, parent_clk)) {
> >> dev_err(dev, "failed to set parent.\n");
> >> - clk_put(parent_clk);
> >> + devm_clk_put(dev, parent_clk);
> >
> > remove the above call. is there any reason that devm_clk_put should be
> called here?
>
> Devm resources are freed/released automatically only when the device
> detaches. In the above case the clock was released explicitly (for whatever
> reasons) earlier. Hence i have used devm call to keep the code logic same
> as i do not know the behavior if this clock is 'put' when the device
> detaches instead of here.
>
>
If probe is failed, devm resources are released by devres_release_all(). So
that is unnecessary call. Remove it.
>
> >
> >>
> >> clk_disable(ctx->sclk_fimc_clk);
> >> - clk_put(ctx->sclk_fimc_clk);
> >> - clk_put(ctx->fimc_clk);
> >> - clk_put(ctx->wb_clk);
> >> - clk_put(ctx->wb_b_clk);
> >> return -EINVAL;
> >> }
> >>
> >> - clk_put(parent_clk);
> >> + devm_clk_put(dev, parent_clk);
> >
> > ditto.
> >
> >>
> >> clk_set_rate(ctx->sclk_fimc_clk, pdata->clk_rate);
> >>
> >> /* resource memory */
> >> @@ -1804,16 +1790,14 @@ static int __devinit fimc_probe(struct
> platform_device *pdev)
> >> ctx->regs = devm_request_and_ioremap(dev, ctx->regs_res);
> >> if (!ctx->regs) {
> >> dev_err(dev, "failed to map registers.\n");
> >> - ret = -ENXIO;
> >> - goto err_clk;
> >> + return -ENXIO;
> >> }
> >>
> >> /* resource irq */
> >> res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> >> if (!res) {
> >> dev_err(dev, "failed to request irq resource.\n");
> >> - ret = -ENOENT;
> >> - goto err_clk;
> >> + return -ENOENT;
> >> }
> >>
> >> ctx->irq = res->start;
> >> @@ -1821,7 +1805,7 @@ static int __devinit fimc_probe(struct
> platform_device *pdev)
> >> IRQF_ONESHOT, "drm_fimc", ctx);
> >> if (ret < 0) {
> >> dev_err(dev, "failed to request irq.\n");
> >> - goto err_clk;
> >> + return ret;
> >> }
> >>
> >> /* context initailization */
> >> @@ -1867,11 +1851,6 @@ err_ippdrv_register:
> >> pm_runtime_disable(dev);
> >> err_get_irq:
> >> free_irq(ctx->irq, ctx);
> >> -err_clk:
> >> - clk_put(ctx->sclk_fimc_clk);
> >> - clk_put(ctx->fimc_clk);
> >> - clk_put(ctx->wb_clk);
> >> - clk_put(ctx->wb_b_clk);
> >>
> >> return ret;
> >> }
> >> @@ -1891,11 +1870,6 @@ static int __devexit fimc_remove(struct
> platform_device *pdev)
> >>
> >> free_irq(ctx->irq, ctx);
> >>
> >> - clk_put(ctx->sclk_fimc_clk);
> >> - clk_put(ctx->fimc_clk);
> >> - clk_put(ctx->wb_clk);
> >> - clk_put(ctx->wb_b_clk);
> >> -
> >> return 0;
> >> }
> >>
> >> --
> >> 1.7.4.1
> >>
> >> _______________________________________________
> >> dri-devel mailing list
> >> dri-devel at lists.freedesktop.org
> >> http://lists.freedesktop.org/mailman/listinfo/dri-devel
> >
> >
>
> --
> With warm regards,
> Sachin
>
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/dri-devel/attachments/20121227/8b567a0e/attachment-0001.html>
More information about the dri-devel
mailing list