[PATCH 06/20] drm fb helper: use drm_helper_connector_dpms to do dpms
Sascha Hauer
s.hauer at pengutronix.de
Wed Feb 1 02:38:24 PST 2012
drm_fb_helper_on|off currently manually searches for encoders
to turn on/off. Make this simpler by using the helper function.
Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
drivers/gpu/drm/drm_fb_helper.c | 80 +++++----------------------------------
1 files changed, 10 insertions(+), 70 deletions(-)
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index 77fec5a..4fc38a7f 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -306,91 +306,31 @@ static struct sysrq_key_op sysrq_drm_fb_helper_restore_op = {
static struct sysrq_key_op sysrq_drm_fb_helper_restore_op = { };
#endif
-static void drm_fb_helper_on(struct fb_info *info)
+static void drm_fb_helper_dpms(struct fb_info *info, int dpms_mode)
{
struct drm_fb_helper *fb_helper = info->par;
struct drm_device *dev = fb_helper->dev;
struct drm_crtc *crtc;
- struct drm_crtc_helper_funcs *crtc_funcs;
struct drm_connector *connector;
- struct drm_encoder *encoder;
int i, j;
/*
- * For each CRTC in this fb, turn the crtc on then,
- * find all associated encoders and turn them on.
+ * For each CRTC in this fb, turn the connectors on/off.
*/
mutex_lock(&dev->mode_config.mutex);
for (i = 0; i < fb_helper->crtc_count; i++) {
crtc = fb_helper->crtc_info[i].mode_set.crtc;
- crtc_funcs = crtc->helper_private;
if (!crtc->enabled)
continue;
- crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
-
- /* Walk the connectors & encoders on this fb turning them on */
+ /* Walk the connectors & encoders on this fb turning them on/off */
for (j = 0; j < fb_helper->connector_count; j++) {
connector = fb_helper->connector_info[j]->connector;
- connector->dpms = DRM_MODE_DPMS_ON;
+ drm_helper_connector_dpms(connector, dpms_mode);
drm_connector_property_set_value(connector,
- dev->mode_config.dpms_property,
- DRM_MODE_DPMS_ON);
- }
- /* Found a CRTC on this fb, now find encoders */
- list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
- if (encoder->crtc == crtc) {
- struct drm_encoder_helper_funcs *encoder_funcs;
-
- encoder_funcs = encoder->helper_private;
- encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
- }
- }
- }
- mutex_unlock(&dev->mode_config.mutex);
-}
-
-static void drm_fb_helper_off(struct fb_info *info, int dpms_mode)
-{
- struct drm_fb_helper *fb_helper = info->par;
- struct drm_device *dev = fb_helper->dev;
- struct drm_crtc *crtc;
- struct drm_crtc_helper_funcs *crtc_funcs;
- struct drm_connector *connector;
- struct drm_encoder *encoder;
- int i, j;
-
- /*
- * For each CRTC in this fb, find all associated encoders
- * and turn them off, then turn off the CRTC.
- */
- mutex_lock(&dev->mode_config.mutex);
- for (i = 0; i < fb_helper->crtc_count; i++) {
- crtc = fb_helper->crtc_info[i].mode_set.crtc;
- crtc_funcs = crtc->helper_private;
-
- if (!crtc->enabled)
- continue;
-
- /* Walk the connectors on this fb and mark them off */
- for (j = 0; j < fb_helper->connector_count; j++) {
- connector = fb_helper->connector_info[j]->connector;
- connector->dpms = dpms_mode;
- drm_connector_property_set_value(connector,
- dev->mode_config.dpms_property,
- dpms_mode);
- }
- /* Found a CRTC on this fb, now find encoders */
- list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
- if (encoder->crtc == crtc) {
- struct drm_encoder_helper_funcs *encoder_funcs;
-
- encoder_funcs = encoder->helper_private;
- encoder_funcs->dpms(encoder, dpms_mode);
- }
+ dev->mode_config.dpms_property, dpms_mode);
}
- crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
}
mutex_unlock(&dev->mode_config.mutex);
}
@@ -400,23 +340,23 @@ int drm_fb_helper_blank(int blank, struct fb_info *info)
switch (blank) {
/* Display: On; HSync: On, VSync: On */
case FB_BLANK_UNBLANK:
- drm_fb_helper_on(info);
+ drm_fb_helper_dpms(info, DRM_MODE_DPMS_ON);
break;
/* Display: Off; HSync: On, VSync: On */
case FB_BLANK_NORMAL:
- drm_fb_helper_off(info, DRM_MODE_DPMS_STANDBY);
+ drm_fb_helper_dpms(info, DRM_MODE_DPMS_STANDBY);
break;
/* Display: Off; HSync: Off, VSync: On */
case FB_BLANK_HSYNC_SUSPEND:
- drm_fb_helper_off(info, DRM_MODE_DPMS_STANDBY);
+ drm_fb_helper_dpms(info, DRM_MODE_DPMS_STANDBY);
break;
/* Display: Off; HSync: On, VSync: Off */
case FB_BLANK_VSYNC_SUSPEND:
- drm_fb_helper_off(info, DRM_MODE_DPMS_SUSPEND);
+ drm_fb_helper_dpms(info, DRM_MODE_DPMS_SUSPEND);
break;
/* Display: Off; HSync: Off, VSync: Off */
case FB_BLANK_POWERDOWN:
- drm_fb_helper_off(info, DRM_MODE_DPMS_OFF);
+ drm_fb_helper_dpms(info, DRM_MODE_DPMS_OFF);
break;
}
return 0;
--
1.7.8.3
More information about the dri-devel
mailing list