[PATCH 09/16] drm/radeon: make cp init on cayman more robust
Jerome Glisse
j.glisse at gmail.com
Mon Jul 9 07:43:05 PDT 2012
On Mon, Jul 9, 2012 at 6:41 AM, Christian König <deathsimple at vodafone.de> wrote:
> It's not critical, but the current code isn't
> 100% correct.
>
> Signed-off-by: Christian König <deathsimple at vodafone.de>
> ---
> drivers/gpu/drm/radeon/ni.c | 133 ++++++++++++++++++-------------------------
> 1 file changed, 56 insertions(+), 77 deletions(-)
>
> diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c
> index 32a6082..8b1df33 100644
> --- a/drivers/gpu/drm/radeon/ni.c
> +++ b/drivers/gpu/drm/radeon/ni.c
> @@ -987,10 +987,33 @@ static void cayman_cp_fini(struct radeon_device *rdev)
>
> int cayman_cp_resume(struct radeon_device *rdev)
> {
> + static const int ridx[] = {
> + RADEON_RING_TYPE_GFX_INDEX,
> + CAYMAN_RING_TYPE_CP1_INDEX,
> + CAYMAN_RING_TYPE_CP2_INDEX
> + };
> + static const unsigned cp_rb_cntl[] = {
> + CP_RB0_CNTL,
> + CP_RB1_CNTL,
> + CP_RB2_CNTL,
> + };
> + static const unsigned cp_rb_rptr_addr[] = {
> + CP_RB0_RPTR_ADDR,
> + CP_RB1_RPTR_ADDR,
> + CP_RB2_RPTR_ADDR
> + };
> + static const unsigned cp_rb_rptr_addr_hi[] = {
> + CP_RB0_RPTR_ADDR_HI,
> + CP_RB1_RPTR_ADDR_HI,
> + CP_RB2_RPTR_ADDR_HI
> + };
> + static const unsigned cp_rb_base[] = {
> + CP_RB0_BASE,
> + CP_RB1_BASE,
> + CP_RB2_BASE
> + };
> struct radeon_ring *ring;
> - u32 tmp;
> - u32 rb_bufsz;
> - int r;
> + int i, r;
>
> /* Reset cp; if cp is reset, then PA, SH, VGT also need to be reset */
> WREG32(GRBM_SOFT_RESET, (SOFT_RESET_CP |
> @@ -1012,91 +1035,47 @@ int cayman_cp_resume(struct radeon_device *rdev)
>
> WREG32(CP_DEBUG, (1 << 27));
>
> - /* ring 0 - compute and gfx */
> - /* Set ring buffer size */
> - ring = &rdev->ring[RADEON_RING_TYPE_GFX_INDEX];
> - rb_bufsz = drm_order(ring->ring_size / 8);
> - tmp = (drm_order(RADEON_GPU_PAGE_SIZE/8) << 8) | rb_bufsz;
> -#ifdef __BIG_ENDIAN
> - tmp |= BUF_SWAP_32BIT;
> -#endif
> - WREG32(CP_RB0_CNTL, tmp);
> -
> - /* Initialize the ring buffer's read and write pointers */
> - WREG32(CP_RB0_CNTL, tmp | RB_RPTR_WR_ENA);
> - ring->wptr = 0;
> - WREG32(CP_RB0_WPTR, ring->wptr);
> -
> /* set the wb address wether it's enabled or not */
> - WREG32(CP_RB0_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFFFFFFFC);
> - WREG32(CP_RB0_RPTR_ADDR_HI, upper_32_bits(rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFF);
> WREG32(SCRATCH_ADDR, ((rdev->wb.gpu_addr + RADEON_WB_SCRATCH_OFFSET) >> 8) & 0xFFFFFFFF);
> + WREG32(SCRATCH_UMSK, 0xff);
This looks wrong you set the mask unconditionaly even if writeback is disabled.
> - if (rdev->wb.enabled)
> - WREG32(SCRATCH_UMSK, 0xff);
> - else {
> - tmp |= RB_NO_UPDATE;
> - WREG32(SCRATCH_UMSK, 0);
> - }
> -
> - mdelay(1);
> - WREG32(CP_RB0_CNTL, tmp);
> -
> - WREG32(CP_RB0_BASE, ring->gpu_addr >> 8);
> -
> - ring->rptr = RREG32(CP_RB0_RPTR);
> + for (i = 0; i < 3; ++i) {
> + uint32_t rb_cntl;
> + uint64_t addr;
>
> - /* ring1 - compute only */
> - /* Set ring buffer size */
> - ring = &rdev->ring[CAYMAN_RING_TYPE_CP1_INDEX];
> - rb_bufsz = drm_order(ring->ring_size / 8);
> - tmp = (drm_order(RADEON_GPU_PAGE_SIZE/8) << 8) | rb_bufsz;
> + /* Set ring buffer size */
> + ring = &rdev->ring[ridx[i]];
> + rb_cntl = drm_order(ring->ring_size / 8);
> + rb_cntl |= drm_order(RADEON_GPU_PAGE_SIZE/8) << 8;
> #ifdef __BIG_ENDIAN
> - tmp |= BUF_SWAP_32BIT;
> + rb_cntl |= BUF_SWAP_32BIT;
> #endif
> - WREG32(CP_RB1_CNTL, tmp);
> + WREG32(cp_rb_cntl[i], rb_cntl);
>
> - /* Initialize the ring buffer's read and write pointers */
> - WREG32(CP_RB1_CNTL, tmp | RB_RPTR_WR_ENA);
> - ring->wptr = 0;
> - WREG32(CP_RB1_WPTR, ring->wptr);
> -
> - /* set the wb address wether it's enabled or not */
> - WREG32(CP_RB1_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP1_RPTR_OFFSET) & 0xFFFFFFFC);
> - WREG32(CP_RB1_RPTR_ADDR_HI, upper_32_bits(rdev->wb.gpu_addr + RADEON_WB_CP1_RPTR_OFFSET) & 0xFF);
> -
> - mdelay(1);
> - WREG32(CP_RB1_CNTL, tmp);
> -
> - WREG32(CP_RB1_BASE, ring->gpu_addr >> 8);
> -
> - ring->rptr = RREG32(CP_RB1_RPTR);
> -
> - /* ring2 - compute only */
> - /* Set ring buffer size */
> - ring = &rdev->ring[CAYMAN_RING_TYPE_CP2_INDEX];
> - rb_bufsz = drm_order(ring->ring_size / 8);
> - tmp = (drm_order(RADEON_GPU_PAGE_SIZE/8) << 8) | rb_bufsz;
> -#ifdef __BIG_ENDIAN
> - tmp |= BUF_SWAP_32BIT;
> -#endif
> - WREG32(CP_RB2_CNTL, tmp);
> -
> - /* Initialize the ring buffer's read and write pointers */
> - WREG32(CP_RB2_CNTL, tmp | RB_RPTR_WR_ENA);
> - ring->wptr = 0;
> - WREG32(CP_RB2_WPTR, ring->wptr);
> + /* set the wb address wether it's enabled or not */
> + addr = rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET;
> + WREG32(cp_rb_rptr_addr[i], addr & 0xFFFFFFFC);
> + WREG32(cp_rb_rptr_addr_hi[i], upper_32_bits(addr) & 0xFF);
> + }
>
> - /* set the wb address wether it's enabled or not */
> - WREG32(CP_RB2_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP2_RPTR_OFFSET) & 0xFFFFFFFC);
> - WREG32(CP_RB2_RPTR_ADDR_HI, upper_32_bits(rdev->wb.gpu_addr + RADEON_WB_CP2_RPTR_OFFSET) & 0xFF);
> + /* set the rb base addr, this causes an internal reset of ALL rings */
> + for (i = 0; i < 3; ++i) {
> + ring = &rdev->ring[ridx[i]];
> + WREG32(cp_rb_base[i], ring->gpu_addr >> 8);
> + }
>
> - mdelay(1);
> - WREG32(CP_RB2_CNTL, tmp);
> + for (i = 0; i < 3; ++i) {
> + /* Initialize the ring buffer's read and write pointers */
> + ring = &rdev->ring[ridx[i]];
> + WREG32_P(cp_rb_cntl[i], RB_RPTR_WR_ENA, ~RB_RPTR_WR_ENA);
>
> - WREG32(CP_RB2_BASE, ring->gpu_addr >> 8);
> + ring->rptr = ring->wptr = 0;
> + WREG32(ring->rptr_reg, ring->rptr);
> + WREG32(ring->wptr_reg, ring->wptr);
>
> - ring->rptr = RREG32(CP_RB2_RPTR);
> + mdelay(1);
> + WREG32_P(cp_rb_cntl[i], 0, ~RB_RPTR_WR_ENA);
> + }
>
> /* start the rings */
> cayman_cp_start(rdev);
> --
> 1.7.9.5
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
More information about the dri-devel
mailing list