3.5-rc6 nouveau and no text/graphics
Jan Engelhardt
jengelh at inai.de
Mon Jul 16 03:28:58 PDT 2012
Hi,
I have here some old classy laptop (Dell Precision M40 PP01X, Pentium3
Mobile CPU) which has, according to lspci,
01:00.0 VGA compatible controller: nVidia Corporation NV11GL [Quadro2
MXR/EX/Go] (rev b2)
01:00.0 0300: 10de:0113 (rev b2)
Unfortunately, when loading nouveaufb.ko, all that happens is that the
screen goes blank. This occurs on both 2.6.37, 3.1.0, 3.4.4 . The
backlight remains on, but there is no more tty1 text or X showing,
though, the machine is running and ssh-able. "nomodeset" is possible as
a boot option, but of course does not get me the luxury of framebuffer
or Xorg.
Anything to try?
thanks,
Jan
-- full dmesg --
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.0-rc6-2-desktop (geeko at buildhost) (gcc version 4.7.1 20120615 [gcc-4_7-branch revision 188649] (SUSE Linux) ) #1 SMP PREEMPT Tue Jul 10 18:52:42 UTC 2012 (8442da0)
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffea7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001ffea800-0x000000001fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feea0000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: Dell Computer Corporation Precision M40 /Precision M40 , BIOS A04 09/13/2001
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1ffea max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 0FEEA0000 mask FFFFE0000 write-through
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped: [mem 0x00000000-0x011fffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x1ffe9fff]
[ 0.000000] [mem 0x00000000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fdfffff] page 2M
[ 0.000000] [mem 0x1fe00000-0x1ffe9fff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x1ffe9fff @ [mem 0x011f5000-0x011fffff]
[ 0.000000] RAMDISK: [mem 0x1f6df000-0x1ffd9fff]
[ 0.000000] ACPI: RSDP 000fde50 00014 (v00 DELL )
[ 0.000000] ACPI: RSDT 000fde64 00028 (v01 DELL CPi R 27D1090D ASL 00000061)
[ 0.000000] ACPI: FACP 000fde90 00074 (v01 DELL CPi R 27D1090D ASL 00000061)
[ 0.000000] ACPI: DSDT fffe4000 02BB7 (v01 INT430 SYSFexxx 00001001 MSFT 0100000D)
[ 0.000000] ACPI: FACS 1ffff800 00040
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ffe9fff]
[ 0.000000] node 0 pfn: [0 - 1ffea]
[ 0.000000] remap_alloc: node 0 [1f000000-1f600000) -> [dea00000-df000000)
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1ffe9fff]
[ 0.000000] NODE_DATA [mem 0x1ea00000-0x1ea01fff] (remapped)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] max_low_pfn = 1ffea, highstart_pfn = 1ffea
[ 0.000000] Low memory ends at vaddr dffea000
[ 0.000000] High memory starts at vaddr dffea000
[ 0.000000] mapped low ram: 0 - 1ffea000
[ 0.000000] low ram: 0 - 1ffea000
[ 0.000000] Node: 0, start_pfn: 10, end_pfn: 9f
[ 0.000000] Setting physnode_map array to node 0 for pfns:
[ 0.000000] 10
[ 0.000000] Node: 0, start_pfn: 100, end_pfn: 1ffea
[ 0.000000] Setting physnode_map array to node 0 for pfns:
[ 0.000000] 100 4100 8100 c100 10100 14100 18100 1c100
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x1ffe9fff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x1ffe9fff]
[ 0.000000] On node 0 totalpages: 130937
[ 0.000000] free_area_init_node: node 0, pgdat dea00000, node_mem_map dea02200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 125962 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] e820: [mem 0x20000000-0xfee9ffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @df6d2000 s31424 r0 d21824 u53248
[ 0.000000] pcpu-alloc: s31424 r0 d21824 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129913
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-FUJITSU_MHT2060AT_NN59T4B18MJR-part2 resume=/dev/disk/by-id/ata-FUJITSU_MHT2060AT_NN59T4B18MJR-part1 splash=silent quiet
[ 0.000000] bootsplash: silent mode.
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 1048272 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 490204k/524200k available (5217k kernel code, 33544k reserved, 3754k data, 500k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xff5b4000 - 0xfffff000 (10540 kB)
[ 0.000000] pkmap : 0xff200000 - 0xff400000 (2048 kB)
[ 0.000000] vmalloc : 0xe07ea000 - 0xff1fe000 ( 490 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdffea000 ( 511 MB)
[ 0.000000] .init : 0xc0ac3000 - 0xc0b40000 ( 500 kB)
[ 0.000000] .data : 0xc07184c0 - 0xc0ac2fc0 (3754 kB)
[ 0.000000] .text : 0xc0200000 - 0xc07184c0 (5217 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:8448 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=de406000 soft=de408000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1196.052 MHz processor.
[ 0.002003] Calibrating delay loop (skipped), value calculated using timer frequency.. 2392.10 BogoMIPS (lpj=1196052)
[ 0.002012] pid_max: default: 32768 minimum: 301
[ 0.003052] Security Framework initialized
[ 0.003101] AppArmor: AppArmor initialized
[ 0.003220] Mount-cache hash table entries: 512
[ 0.003732] Initializing cgroup subsys cpuacct
[ 0.003739] Initializing cgroup subsys memory
[ 0.003765] Initializing cgroup subsys devices
[ 0.003770] Initializing cgroup subsys freezer
[ 0.003775] Initializing cgroup subsys net_cls
[ 0.003779] Initializing cgroup subsys blkio
[ 0.003784] Initializing cgroup subsys perf_event
[ 0.003856] mce: CPU supports 5 MCE banks
[ 0.003952] SMP alternatives: switching to UP code
[ 0.016012] Freeing SMP alternatives: 24k freed
[ 0.016035] ACPI: Core revision 20120320
[ 0.046372] ACPI: setting ELCR to 0200 (from 0c20)
[ 0.047158] weird, boot CPU (#0) not listed by the BIOS.
[ 0.047162] SMP motherboard not detected.
[ 0.047166] Local APIC not detected. Using dummy APIC emulation.
[ 0.047169] SMP disabled
[ 0.047174] Performance Events:
[ 0.047180] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.047183] no hardware sampling interrupt available.
[ 0.047187] p6 PMU driver.
[ 0.047194] ... version: 0
[ 0.047197] ... bit width: 32
[ 0.047200] ... generic registers: 2
[ 0.047203] ... value mask: 00000000ffffffff
[ 0.047206] ... max period: 000000007fffffff
[ 0.047209] ... fixed-purpose events: 0
[ 0.047212] ... event mask: 0000000000000003
[ 0.056630] NMI watchdog: disabled (cpu0): not supported (no LAPIC?)
[ 0.056792] Brought up 1 CPUs
[ 0.056799] Total of 1 processors activated (2392.10 BogoMIPS).
[ 0.057319] devtmpfs: initialized
[ 0.058102] RTC time: 10:25:10, date: 07/16/12
[ 0.058229] NET: Registered protocol family 16
[ 0.058749] ACPI: bus type pci registered
[ 0.081846] PCI: PCI BIOS revision 2.10 entry at 0xfc06e, last bus=2
[ 0.081851] PCI: Using configuration type 1 for base access
[ 0.084404] bio: create slab <bio-0> at 0
[ 0.084594] ACPI: Added _OSI(Module Device)
[ 0.084599] ACPI: Added _OSI(Processor Device)
[ 0.084604] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.084610] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.086155] ACPI: EC: Look up EC in DSDT
[ 0.126358] ACPI: Interpreter enabled
[ 0.126385] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.126453] ACPI: Using PIC for interrupt routing
[ 0.191662] ACPI: Power Resource [PADA] (on)
[ 0.201450] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.201470] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.226781] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.277318] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.277325] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.277331] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.277337] pci_root PNP0A03:00: host bridge window [mem 0x000cc000-0x000dffff] (ignored)
[ 0.277343] pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xfee9ffff] (ignored)
[ 0.277349] pci_root PNP0A03:00: host bridge window [mem 0xfef00000-0xffb7ffff] (ignored)
[ 0.277354] pci_root PNP0A03:00: host bridge window [mem 0xfef00000-0xff27ffff] (ignored)
[ 0.277359] PCI: root bus 00: using default resources
[ 0.277465] PCI host bridge to bus 0000:00
[ 0.277474] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.277480] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.277509] pci 0000:00:00.0: [8086:1130] type 00 class 0x060000
[ 0.277528] pci 0000:00:00.0: reg 10: [mem 0xe8000000-0xebffffff pref]
[ 0.277601] pci 0000:00:01.0: [8086:1131] type 01 class 0x060400
[ 0.277680] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060400
[ 0.277737] pci 0000:00:1f.0: [8086:244c] type 00 class 0x060100
[ 0.277834] pci 0000:00:1f.1: [8086:244a] type 00 class 0x010180
[ 0.277885] pci 0000:00:1f.1: reg 20: [io 0xbfa0-0xbfaf]
[ 0.277933] pci 0000:00:1f.2: [8086:2442] type 00 class 0x0c0300
[ 0.277995] pci 0000:00:1f.2: reg 20: [io 0xdce0-0xdcff]
[ 0.278068] pci 0000:01:00.0: [10de:0113] type 00 class 0x030000
[ 0.278089] pci 0000:01:00.0: reg 10: [mem 0xfc000000-0xfcffffff]
[ 0.278102] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xe7ffffff pref]
[ 0.278138] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.278214] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.278222] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.278230] pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfdffffff]
[ 0.278237] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe7ffffff pref]
[ 0.278275] pci 0000:02:03.0: [125d:1998] type 00 class 0x040100
[ 0.278297] pci 0000:02:03.0: reg 10: [io 0xec00-0xecff]
[ 0.278312] pci 0000:02:03.0: reg 14: [mem 0xf8ffe000-0xf8ffffff]
[ 0.278387] pci 0000:02:03.0: supports D1 D2
[ 0.278393] pci 0000:02:03.0: PME# supported from D1 D2 D3hot
[ 0.278425] pci 0000:02:06.0: [10b7:6055] type 00 class 0x020000
[ 0.278447] pci 0000:02:06.0: reg 10: [io 0xe800-0xe8ff]
[ 0.278461] pci 0000:02:06.0: reg 14: [mem 0xf8ffdc00-0xf8ffdc7f]
[ 0.278474] pci 0000:02:06.0: reg 18: [mem 0xf8ffd800-0xf8ffd87f]
[ 0.278511] pci 0000:02:06.0: reg 30: [mem 0xf9000000-0xf901ffff pref]
[ 0.278542] pci 0000:02:06.0: supports D1 D2
[ 0.278547] pci 0000:02:06.0: PME# supported from D1 D2 D3hot D3cold
[ 0.278575] pci 0000:02:06.1: [10b7:1007] type 00 class 0x078000
[ 0.278596] pci 0000:02:06.1: reg 10: [io 0xe400-0xe4ff]
[ 0.278609] pci 0000:02:06.1: reg 14: [mem 0xf8ffd400-0xf8ffd4ff]
[ 0.278623] pci 0000:02:06.1: reg 18: [mem 0xf8ffd000-0xf8ffd07f]
[ 0.278684] pci 0000:02:06.1: supports D2
[ 0.278690] pci 0000:02:06.1: PME# supported from D2 D3hot D3cold
[ 0.278736] pci 0000:02:0f.0: [104c:ac42] type 02 class 0x060700
[ 0.278759] pci 0000:02:0f.0: reg 10: [mem 0x00000000-0x00000fff]
[ 0.278792] pci 0000:02:0f.0: supports D1 D2
[ 0.278798] pci 0000:02:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.278826] pci 0000:02:0f.1: [104c:ac42] type 02 class 0x060700
[ 0.278848] pci 0000:02:0f.1: reg 10: [mem 0x00000000-0x00000fff]
[ 0.278881] pci 0000:02:0f.1: supports D1 D2
[ 0.278886] pci 0000:02:0f.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.278917] pci 0000:02:0f.2: [104c:8027] type 00 class 0x0c0010
[ 0.278939] pci 0000:02:0f.2: reg 10: [mem 0xf8ffc800-0xf8ffcfff]
[ 0.278954] pci 0000:02:0f.2: reg 14: [mem 0xf8ff8000-0xf8ffbfff]
[ 0.279040] pci 0000:02:0f.2: supports D2
[ 0.279046] pci 0000:02:0f.2: PME# supported from D2 D3hot
[ 0.279087] pci 0000:00:1e.0: PCI bridge to [bus 02-10] (subtractive decode)
[ 0.279095] pci 0000:00:1e.0: bridge window [io 0xe000-0xffff]
[ 0.279104] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xfbffffff]
[ 0.279113] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.279119] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.279126] pci 0000:02:0f.0: Primary bus is hard wired to 0
[ 0.279135] pci 0000:02:0f.1: Primary bus is hard wired to 0
[ 0.279144] pci 0000:02:0f.0: Primary bus is hard wired to 0
[ 0.279182] pci 0000:02:0f.1: Primary bus is hard wired to 0
[ 0.279233] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.279402] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.279464] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 0.279644] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.340107] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.340620] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.341049] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.341560] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.341910] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.341921] vgaarb: loaded
[ 0.341924] vgaarb: bridge control possible 0000:01:00.0
[ 0.342242] SCSI subsystem initialized
[ 0.342387] libata version 3.00 loaded.
[ 0.342460] ACPI: bus type usb registered
[ 0.342523] usbcore: registered new interface driver usbfs
[ 0.342553] usbcore: registered new interface driver hub
[ 0.342615] usbcore: registered new device driver usb
[ 0.342787] PCI: Using ACPI for IRQ routing
[ 0.342796] PCI: pci_cache_line_size set to 32 bytes
[ 0.342884] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.342891] e820: reserve RAM buffer [mem 0x1ffea800-0x1fffffff]
[ 0.343176] NetLabel: Initializing
[ 0.343181] NetLabel: domain hash size = 128
[ 0.343183] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.343214] NetLabel: unlabeled traffic allowed by default
[ 0.343308] Switching to clocksource pit
[ 0.352355] AppArmor: AppArmor Filesystem Enabled
[ 0.352477] pnp: PnP ACPI init
[ 0.352530] ACPI: bus type pnp registered
[ 0.374397] pnp 00:00: [mem 0x00000000-0x0009fbff]
[ 0.374406] pnp 00:00: [mem 0x0009fc00-0x0009ffff]
[ 0.374412] pnp 00:00: [mem 0x000c0000-0x000d3fff]
[ 0.374417] pnp 00:00: [mem 0x000e0000-0x000fffff]
[ 0.374423] pnp 00:00: [mem 0x00100000-0x1ffeffff]
[ 0.374429] pnp 00:00: [mem 0x1fff0000-0x1fffffff]
[ 0.374435] pnp 00:00: [mem 0xfeea0000-0xfeefffff]
[ 0.374440] pnp 00:00: [mem 0xfff80000-0xffffffff]
[ 0.374628] system 00:00: [mem 0x00000000-0x0009fbff] could not be reserved
[ 0.374636] system 00:00: [mem 0x0009fc00-0x0009ffff] could not be reserved
[ 0.374644] system 00:00: [mem 0x000c0000-0x000d3fff] could not be reserved
[ 0.374652] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.374659] system 00:00: [mem 0x00100000-0x1ffeffff] could not be reserved
[ 0.374667] system 00:00: [mem 0x1fff0000-0x1fffffff] has been reserved
[ 0.374674] system 00:00: [mem 0xfeea0000-0xfeefffff] has been reserved
[ 0.374681] system 00:00: [mem 0xfff80000-0xffffffff] has been reserved
[ 0.374693] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.400263] pnp 00:01: [bus 00-ff]
[ 0.400272] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.400278] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.400284] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.400291] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.400297] pnp 00:01: [mem 0x000cc000-0x000dffff window]
[ 0.400303] pnp 00:01: [mem 0x20000000-0xfee9ffff window]
[ 0.400309] pnp 00:01: [mem 0xfef00000-0xffb7ffff window]
[ 0.400315] pnp 00:01: [mem 0xfef00000-0xff27ffff window]
[ 0.400445] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.400532] pnp 00:02: [io 0x0092]
[ 0.400538] pnp 00:02: [io 0x00b2]
[ 0.400544] pnp 00:02: [io 0x0020-0x0021]
[ 0.400549] pnp 00:02: [io 0x00a0-0x00a1]
[ 0.400556] pnp 00:02: [irq 2 disabled]
[ 0.400562] pnp 00:02: [io 0x04d0-0x04d1]
[ 0.400588] pnp 00:02: [io 0x0800-0x0805]
[ 0.400595] pnp 00:02: [io 0x0808-0x080f]
[ 0.400692] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.400700] system 00:02: [io 0x0800-0x0805] has been reserved
[ 0.400708] system 00:02: [io 0x0808-0x080f] has been reserved
[ 0.400715] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.400801] pnp 00:03: [io 0x00b3]
[ 0.400807] pnp 00:03: [io 0x0806-0x0807]
[ 0.400813] pnp 00:03: [io 0x0810-0x085f]
[ 0.400818] pnp 00:03: [io 0x0860-0x087f]
[ 0.400824] pnp 00:03: [io 0x0880-0x08bf]
[ 0.400829] pnp 00:03: [io 0x08c0-0x08ff]
[ 0.400835] pnp 00:03: [io 0x0600-0x067f]
[ 0.400840] pnp 00:03: [io 0x0680-0x06ff]
[ 0.400933] system 00:03: [io 0x0806-0x0807] has been reserved
[ 0.400942] system 00:03: [io 0x0810-0x085f] has been reserved
[ 0.400949] system 00:03: [io 0x0860-0x087f] has been reserved
[ 0.400956] system 00:03: [io 0x0880-0x08bf] has been reserved
[ 0.400963] system 00:03: [io 0x08c0-0x08ff] has been reserved
[ 0.400970] system 00:03: [io 0x0600-0x067f] has been reserved
[ 0.400977] system 00:03: [io 0x0680-0x06ff] has been reserved
[ 0.400984] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.402333] pnp 00:04: [io 0xf000-0xf0fe]
[ 0.402339] pnp 00:04: [io 0xf100-0xf1fe]
[ 0.402345] pnp 00:04: [io 0xf200-0xf2fe]
[ 0.402354] pnp 00:04: [io 0xf400-0xf4fe]
[ 0.402360] pnp 00:04: [io 0xf500-0xf5fe]
[ 0.402365] pnp 00:04: [io 0xf600-0xf6fe]
[ 0.402371] pnp 00:04: [io 0xf800-0xf8fe]
[ 0.402376] pnp 00:04: [io 0xf900-0xf9fe]
[ 0.402382] pnp 00:04: [io 0xfa00-0xfafe]
[ 0.402387] pnp 00:04: [io 0xfc00-0xfcfe]
[ 0.402393] pnp 00:04: [io 0xfd00-0xfdfe]
[ 0.402398] pnp 00:04: [io 0xfe00-0xfefe]
[ 0.402404] pnp 00:04: [mem 0xfa000000-0xfbffffff]
[ 0.402421] pnp 00:04: disabling [io 0xf000-0xf0fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
[ 0.402428] pnp 00:04: disabling [io 0xf100-0xf1fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
[ 0.402435] pnp 00:04: disabling [io 0xf200-0xf2fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
[ 0.402442] pnp 00:04: disabling [io 0xf400-0xf4fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
[ 0.402449] pnp 00:04: disabling [io 0xf500-0xf5fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
[ 0.402456] pnp 00:04: disabling [io 0xf600-0xf6fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
[ 0.402463] pnp 00:04: disabling [io 0xf800-0xf8fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
[ 0.402470] pnp 00:04: disabling [io 0xf900-0xf9fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
[ 0.402477] pnp 00:04: disabling [io 0xfa00-0xfafe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
[ 0.402484] pnp 00:04: disabling [io 0xfc00-0xfcfe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
[ 0.402491] pnp 00:04: disabling [io 0xfd00-0xfdfe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
[ 0.402499] pnp 00:04: disabling [io 0xfe00-0xfefe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
[ 0.402506] pnp 00:04: disabling [mem 0xfa000000-0xfbffffff] because it overlaps 0000:00:1e.0 BAR 14 [mem 0xf4000000-0xfbffffff]
[ 0.402619] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.402711] pnp 00:05: [irq 12]
[ 0.402772] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.402853] pnp 00:06: [io 0x0060]
[ 0.402859] pnp 00:06: [io 0x0064]
[ 0.402865] pnp 00:06: [irq 1]
[ 0.402926] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.403012] pnp 00:07: [io 0x0070-0x0071]
[ 0.403019] pnp 00:07: [irq 8]
[ 0.403025] pnp 00:07: [io 0x0072-0x0077]
[ 0.403089] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.403179] pnp 00:08: [io 0x0061]
[ 0.403186] pnp 00:08: [io 0x0063]
[ 0.403191] pnp 00:08: [io 0x0065]
[ 0.403196] pnp 00:08: [io 0x0067]
[ 0.403259] pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.403343] pnp 00:09: [io 0x002e-0x002f]
[ 0.403349] pnp 00:09: [io 0x0900-0x091f]
[ 0.403355] pnp 00:09: [io 0x03f0-0x03f1]
[ 0.403449] system 00:09: [io 0x0900-0x091f] has been reserved
[ 0.403457] system 00:09: [io 0x03f0-0x03f1] has been reserved
[ 0.403465] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.403557] pnp 00:0a: [dma 4]
[ 0.403564] pnp 00:0a: [io 0x0000-0x000f]
[ 0.403592] pnp 00:0a: [io 0x0080-0x008f]
[ 0.403598] pnp 00:0a: [io 0x00c0-0x00df]
[ 0.403603] pnp 00:0a: [io 0x0010-0x001f]
[ 0.403609] pnp 00:0a: [io 0x0090-0x0091]
[ 0.403614] pnp 00:0a: [io 0x0093-0x009f]
[ 0.403683] pnp 00:0a: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.403767] pnp 00:0b: [io 0x00f0-0x00ff]
[ 0.403775] pnp 00:0b: [irq 13]
[ 0.403840] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.439629] pnp 00:0c: [irq 6]
[ 0.439636] pnp 00:0c: [io 0x03f2-0x03f5]
[ 0.439642] pnp 00:0c: [io 0x03f7]
[ 0.439647] pnp 00:0c: [dma 2]
[ 0.439745] pnp 00:0c: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.466064] pnp 00:0d: [irq 4]
[ 0.466071] pnp 00:0d: [io 0x03f8-0x03ff]
[ 0.466364] pnp 00:0d: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.507065] pnp 00:0e: [dma 3]
[ 0.507071] pnp 00:0e: [irq 7]
[ 0.507080] pnp 00:0e: [io 0x0378-0x037f]
[ 0.507086] pnp 00:0e: [io 0x0778-0x077b]
[ 0.507309] pnp 00:0e: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.509103] pnp: PnP ACPI: found 15 devices
[ 0.509107] ACPI: ACPI bus type pnp unregistered
[ 0.548391] Switching to clocksource acpi_pm
[ 0.548511] pci 0000:02:0f.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.548520] pci 0000:02:0f.1: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.548534] pci 0000:00:1e.0: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 02-10] add_size 8000000
[ 0.548552] pci 0000:00:1e.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 8000000
[ 0.548607] pci 0000:00:1e.0: BAR 15: assigned [mem 0x20000000-0x27ffffff pref]
[ 0.548620] pci 0000:01:00.0: BAR 6: assigned [mem 0xfd000000-0xfd00ffff pref]
[ 0.548629] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.548637] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.548646] pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfdffffff]
[ 0.548654] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe7ffffff pref]
[ 0.548675] pci 0000:02:0f.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.548682] pci 0000:02:0f.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.548689] pci 0000:02:0f.1: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.548695] pci 0000:02:0f.1: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.548702] pci 0000:02:0f.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.548708] pci 0000:02:0f.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.548714] pci 0000:02:0f.1: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.548720] pci 0000:02:0f.1: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.548727] pci 0000:02:0f.0: BAR 0: assigned [mem 0xf4000000-0xf4000fff]
[ 0.548738] pci 0000:02:0f.0: BAR 15: assigned [mem 0x20000000-0x23ffffff pref]
[ 0.548748] pci 0000:02:0f.0: BAR 16: assigned [mem 0x28000000-0x2bffffff]
[ 0.548756] pci 0000:02:0f.1: BAR 0: assigned [mem 0xf8000000-0xf8000fff]
[ 0.548765] pci 0000:02:0f.1: BAR 15: assigned [mem 0x24000000-0x27ffffff pref]
[ 0.548776] pci 0000:02:0f.1: BAR 16: assigned [mem 0x2c000000-0x2fffffff]
[ 0.548783] pci 0000:02:0f.0: BAR 13: assigned [io 0xe000-0xe0ff]
[ 0.548790] pci 0000:02:0f.0: BAR 14: assigned [io 0xf000-0xf0ff]
[ 0.548797] pci 0000:02:0f.1: BAR 13: assigned [io 0xf400-0xf4ff]
[ 0.548804] pci 0000:02:0f.1: BAR 14: assigned [io 0xf800-0xf8ff]
[ 0.548813] pci 0000:02:0f.0: CardBus bridge to [bus 03-06]
[ 0.548819] pci 0000:02:0f.0: bridge window [io 0xe000-0xe0ff]
[ 0.548827] pci 0000:02:0f.0: bridge window [io 0xf000-0xf0ff]
[ 0.548835] pci 0000:02:0f.0: bridge window [mem 0x20000000-0x23ffffff pref]
[ 0.548843] pci 0000:02:0f.0: bridge window [mem 0x28000000-0x2bffffff]
[ 0.548850] pci 0000:02:0f.1: CardBus bridge to [bus 07-0a]
[ 0.548856] pci 0000:02:0f.1: bridge window [io 0xf400-0xf4ff]
[ 0.548863] pci 0000:02:0f.1: bridge window [io 0xf800-0xf8ff]
[ 0.548871] pci 0000:02:0f.1: bridge window [mem 0x24000000-0x27ffffff pref]
[ 0.548879] pci 0000:02:0f.1: bridge window [mem 0x2c000000-0x2fffffff]
[ 0.548887] pci 0000:00:1e.0: PCI bridge to [bus 02-10]
[ 0.548894] pci 0000:00:1e.0: bridge window [io 0xe000-0xffff]
[ 0.548903] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xfbffffff]
[ 0.548911] pci 0000:00:1e.0: bridge window [mem 0x20000000-0x27ffffff pref]
[ 0.548945] pci 0000:00:1e.0: setting latency timer to 64
[ 0.548957] pci 0000:02:0f.0: enabling device (0000 -> 0003)
[ 0.549761] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 0.549768] PCI: setting IRQ 10 as level-triggered
[ 0.549786] pci 0000:02:0f.1: enabling device (0000 -> 0003)
[ 0.549802] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.549808] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.549815] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.549821] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfdffffff]
[ 0.549827] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe7ffffff pref]
[ 0.549833] pci_bus 0000:02: resource 0 [io 0xe000-0xffff]
[ 0.549839] pci_bus 0000:02: resource 1 [mem 0xf4000000-0xfbffffff]
[ 0.549845] pci_bus 0000:02: resource 2 [mem 0x20000000-0x27ffffff pref]
[ 0.549851] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.549856] pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.549863] pci_bus 0000:03: resource 0 [io 0xe000-0xe0ff]
[ 0.549868] pci_bus 0000:03: resource 1 [io 0xf000-0xf0ff]
[ 0.549874] pci_bus 0000:03: resource 2 [mem 0x20000000-0x23ffffff pref]
[ 0.549880] pci_bus 0000:03: resource 3 [mem 0x28000000-0x2bffffff]
[ 0.549886] pci_bus 0000:07: resource 0 [io 0xf400-0xf4ff]
[ 0.549892] pci_bus 0000:07: resource 1 [io 0xf800-0xf8ff]
[ 0.549898] pci_bus 0000:07: resource 2 [mem 0x24000000-0x27ffffff pref]
[ 0.549904] pci_bus 0000:07: resource 3 [mem 0x2c000000-0x2fffffff]
[ 0.550077] NET: Registered protocol family 2
[ 0.550241] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.550576] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.550973] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.551428] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.551436] TCP: reno registered
[ 0.551450] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.551482] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.551743] NET: Registered protocol family 1
[ 0.551875] pci 0000:01:00.0: Boot video device
[ 0.551911] PCI: CLS 32 bytes, default 32
[ 0.552161] Unpacking initramfs...
[ 1.029345] Freeing initrd memory: 9196k freed
[ 1.071431] audit: initializing netlink socket (disabled)
[ 1.071477] type=2000 audit(1342434311.070:1): initialized
[ 1.109883] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.110268] VFS: Disk quotas dquot_6.5.2
[ 1.110328] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.110745] msgmni has been set to 975
[ 1.111255] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.111314] io scheduler noop registered
[ 1.111319] io scheduler deadline registered
[ 1.111344] io scheduler cfq registered (default)
[ 1.111842] intel_idle: does not run on family 6 model 11
[ 1.111911] GHES: HEST is not enabled!
[ 1.112059] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 1.132599] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.154040] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.154402] Non-volatile memory driver v1.3
[ 1.154407] Linux agpgart interface v0.103
[ 1.154664] agpgart-intel 0000:00:00.0: Intel i815 Chipset
[ 1.159316] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe8000000
[ 1.159761] Fixed MDIO Bus: probed
[ 1.159767] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.159818] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.159857] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.159927] uhci_hcd 0000:00:1f.2: setting latency timer to 64
[ 1.159934] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 1.159952] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[ 1.160001] uhci_hcd 0000:00:1f.2: irq 10, io base 0x0000dce0
[ 1.160129] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.160135] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.160141] usb usb1: Product: UHCI Host Controller
[ 1.160146] usb usb1: Manufacturer: Linux 3.5.0-rc6-2-desktop uhci_hcd
[ 1.160151] usb usb1: SerialNumber: 0000:00:1f.2
[ 1.160494] hub 1-0:1.0: USB hub found
[ 1.160512] hub 1-0:1.0: 2 ports detected
[ 1.160787] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.165998] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.166092] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.166298] mousedev: PS/2 mouse device common for all mice
[ 1.166762] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.166789] rtc0: alarms up to one day, 114 bytes nvram
[ 1.166810] cpuidle: using governor ladder
[ 1.166814] cpuidle: using governor menu
[ 1.167384] usbcore: registered new interface driver usbhid
[ 1.167387] usbhid: USB HID core driver
[ 1.167817] TCP: cubic registered
[ 1.167886] NET: Registered protocol family 10
[ 1.168417] lib80211: common routines for IEEE802.11 drivers
[ 1.168423] lib80211_crypt: registered algorithm 'NULL'
[ 1.168452] Key type dns_resolver registered
[ 1.168556] Using IPI No-Shortcut mode
[ 1.168810] PM: Checking hibernation image partition /dev/disk/by-id/ata-FUJITSU_MHT2060AT_NN59T4B18MJR-part1
[ 1.169821] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.874776] psmouse serio1: synaptics: Touchpad model: 1, fw: 5.7, id: 0x8146b1, caps: 0x804793/0x0/0x0
[ 1.874789] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 1.918004] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1
[ 1.921156] PM: Hibernation image not present or could not be loaded.
[ 1.921193] registered taskstats version 1
[ 1.921916] Magic number: 4:641:426
[ 1.922086] rtc_cmos 00:07: setting system clock to 2012-07-16 10:25:12 UTC (1342434312)
[ 1.922302] Freeing unused kernel memory: 500k freed
[ 1.923534] Write protecting the kernel text: 5220k
[ 1.923621] Write protecting the kernel read-only data: 3392k
[ 2.059230] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.059249] ACPI: Thermal Zone [THM] (32 C)
[ 2.077470] ata_piix 0000:00:1f.1: version 2.13
[ 2.077601] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2.078294] scsi0 : ata_piix
[ 2.078515] scsi1 : ata_piix
[ 2.078971] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[ 2.078976] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[ 2.080046] Refined TSC clocksource calibration: 1196.012 MHz.
[ 2.080059] Switching to clocksource tsc
[ 2.252544] ata1.00: ATA-6: FUJITSU MHT2060AT, 0022, max UDMA/100
[ 2.252551] ata1.00: 117210240 sectors, multi 8: LBA
[ 2.252564] ata1.01: ATAPI: Samsung CD-RW/DVD-ROM SN-308B, U003, max MWDMA2
[ 2.274413] ata1.00: configured for UDMA/100
[ 2.280277] ata1.01: configured for MWDMA2
[ 2.282274] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2060A 0022 PQ: 0 ANSI: 5
[ 2.282706] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 2.282837] sd 0:0:0:0: [sda] Write Protect is off
[ 2.282844] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.282902] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.324139] sda: sda1 sda2
[ 2.324696] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.326198] scsi 0:0:1:0: CD-ROM SAMSUNG CDRW/DVD SN-308B U003 PQ: 0 ANSI: 5
[ 2.337356] Marking TSC unstable due to TSC halts in idle
[ 2.337473] ACPI: acpi_idle registered with cpuidle
[ 2.345240] Switching to clocksource acpi_pm
[ 2.424384] udevd[87]: starting version 173
[ 2.564274] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 2.605452] ACPI: Lid Switch [LID]
[ 2.606268] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 2.611106] ACPI: Power Button [PBTN]
[ 2.613294] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 2.622363] ACPI: Sleep Button [SBTN]
[ 2.669905] wmi: Mapper loaded
[ 2.687431] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 2.687603] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:09/LNXVIDEO:00/input/input5
[ 2.761984] [drm] Initialized drm 1.1.0 20060810
[ 2.945616] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 2.945628] PCI: setting IRQ 11 as level-triggered
[ 2.959181] [drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x011300b2)
[ 2.964524] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[ 3.198040] [drm] nouveau 0000:01:00.0: ... BIOS checksum invalid
[ 3.198052] [drm] nouveau 0000:01:00.0: Checking PROM for VBIOS
[ 3.198372] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[ 3.198375] [drm] nouveau 0000:01:00.0: Checking ACPI for VBIOS
[ 3.198379] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[ 3.198383] [drm] nouveau 0000:01:00.0: Checking PCIROM for VBIOS
[ 3.198973] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 3.198977] [drm] nouveau 0000:01:00.0: Using VBIOS from PCIROM
[ 3.199285] [drm] nouveau 0000:01:00.0: BMP BIOS found
[ 3.199289] [drm] nouveau 0000:01:00.0: BMP version 5.19
[ 3.199295] [drm] nouveau 0000:01:00.0: Bios version 03.11.01.13
[ 3.199302] [drm] nouveau 0000:01:00.0: No useful DCB data in VBIOS
[ 3.199690] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[ 3.200842] [drm] nouveau 0000:01:00.0: Detected TV encoder: ch7006
[ 3.201189] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xB662
[ 3.201211] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xBD3E
[ 3.201223] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xB67D
[ 3.201252] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xB710
[ 3.201259] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xB852
[ 3.201305] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xB735
[ 3.201392] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xBCE5
[ 3.201407] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 7 at offset 0xB7ED
[ 3.201418] [drm] nouveau 0000:01:00.0: Pointer to LVDS manufacturer table invalid
[ 3.201716] [TTM] Zone kernel: Available graphics memory: 249962 kiB
[ 3.201720] [TTM] Initializing pool allocator
[ 3.201749] [drm] nouveau 0000:01:00.0: Detected 32MiB VRAM (DDR1)
[ 3.202434] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[ 3.202467] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 3.202492] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
[ 3.202535] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
[ 3.202650] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[ 3.281549] [drm] nouveau 0000:01:00.0: Detected TV encoder: ch7006
[ 3.293574] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.293584] [drm] No driver support for vblank timestamp query.
[ 3.293606] [drm] nouveau 0000:01:00.0: 0 available performance level(s)
[ 3.293613] [drm] nouveau 0000:01:00.0: c: core 17MHz memory 350MHz
[ 3.297368] [drm] nouveau 0000:01:00.0: MM: using M2MF for buffer copies
[ 3.298620] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[ 3.334055] No connectors reported connected with modes
[ 3.334063] [drm] Cannot find any crtc or sizes - going 1024x768
[ 3.334340] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x48000, bo df829800
[ 3.334676] fbcon: nouveaufb (fb0) is primary device
[ 3.340228] Console: switching to colour frame buffer device 128x48
[ 3.343688] fb0: nouveaufb frame buffer device
[ 3.343692] drm: registered panic notifier
[ 3.343704] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
[ 3.445955] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[ 3.445975] PM: Basic memory bitmaps created
[ 7.526413] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0b, buttons: 2/3
[ 7.757823] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input6
[ 7.852459] PM: Basic memory bitmaps freed
[ 7.852479] video LNXVIDEO:00: Restoring backlight state
[ 7.987137] PM: Starting manual resume from disk
[ 7.987152] PM: Hibernation image partition 8:1 present
[ 7.987156] PM: Looking for hibernation image.
[ 7.987585] PM: Image not found (code -22)
[ 7.987590] PM: Hibernation image not present or could not be loaded.
[ 8.226390] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 8.450314] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr
[ 9.301183] systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; suse)
[ 9.803562] systemd[1]: Set hostname to <nmngt.uni-math.gwdg.de>.
[ 12.626710] udevd[312]: starting version 173
[ 12.738221] systemd-readahead-replay[310]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day.
[ 21.706215] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr
[ 26.132165] boot.lvm[337]: Waiting for udev to settle...
[ 27.017975] boot.localnet[338]: Using boot-specified hostname 'nmngt.uni-math.gwdg.de'
[ 27.025211] boot.localnet[338]: Setting up hostname 'nmngt'..done
[ 27.074076] boot.localnet[338]: Setting up loopback interface RTNETLINK answers: File exists
[ 27.084115] boot.localnet[338]: ..done
[ 31.915566] microcode: CPU0 sig=0x6b1, pf=0x20, revision=0x1d
[ 32.221497] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 32.255732] microcode: Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
[ 32.292728] intel_rng: FWH not detected
[ 32.319108] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 32.321392] ACPI: AC Adapter [AC] (on-line)
[ 32.355866] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 32.355885] ACPI: Battery Slot [BAT0] (battery absent)
[ 32.392835] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 32.395324] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 32.395737] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 32.395798] sr0: scsi3-mmc drive: 0x/24x writer cd/rw xa/form2 cdda tray
[ 32.395806] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 32.396509] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 32.398616] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 32.399648] Floppy drive(s): fd0 is 1.44M
[ 32.411950] FDC 0 is a post-1991 82077
[ 32.435736] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 32.544741] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 32.544761] ACPI: Battery Slot [BAT1] (battery present)
[ 32.578394] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized
[ 32.582324] parport_pc 00:0e: reported by Plug and Play ACPI
[ 32.582380] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 32.762479] ppdev: user-space parallel port driver
[ 32.838726] yenta_cardbus 0000:02:0f.0: CardBus bridge found [1028:00e5]
[ 32.838788] yenta_cardbus 0000:02:0f.0: Using CSCINT to route CSC interrupts to PCI
[ 32.838794] yenta_cardbus 0000:02:0f.0: Routing CardBus interrupts to PCI
[ 32.838802] yenta_cardbus 0000:02:0f.0: TI: mfunc 0x05033002, devctl 0x64
[ 32.894714] udev-configure-printer[540]: add /module/lpc_ich
[ 32.894864] udev-configure-printer[539]: add /bus/pci/drivers/lpc_ich
[ 32.895450] udev-configure-printer[540]: Failed to get parent
[ 32.896923] udev-configure-printer[539]: Failed to get parent
[ 32.970533] iTCO_vendor_support: vendor-support=0
[ 32.978412] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 32.978480] iTCO_wdt: Found a ICH2-M TCO device (Version=1, TCOBASE=0x0860)
[ 32.979182] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 33.061397] yenta_cardbus 0000:02:0f.0: ISA IRQ mask 0x0038, PCI irq 10
[ 33.061409] yenta_cardbus 0000:02:0f.0: Socket status: 30000006
[ 33.061424] yenta_cardbus 0000:02:0f.0: pcmcia: parent PCI bridge window: [io 0xe000-0xffff]
[ 33.061432] yenta_cardbus 0000:02:0f.0: pcmcia: parent PCI bridge window: [mem 0xf4000000-0xfbffffff]
[ 33.061439] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4000000-0xfbffffff:
[ 33.061450] excluding 0xf4000000-0xf47fffff 0xf8000000-0xf97fffff
[ 33.061478] yenta_cardbus 0000:02:0f.0: pcmcia: parent PCI bridge window: [mem 0x20000000-0x27ffffff pref]
[ 33.061485] pcmcia_socket pcmcia_socket0: cs: memory probe 0x20000000-0x27ffffff:
[ 33.061510] excluding 0x20000000-0x27ffffff
[ 33.062393] yenta_cardbus 0000:02:0f.1: CardBus bridge found [1028:00e5]
[ 33.062419] yenta_cardbus 0000:02:0f.1: Using CSCINT to route CSC interrupts to PCI
[ 33.062424] yenta_cardbus 0000:02:0f.1: Routing CardBus interrupts to PCI
[ 33.062432] yenta_cardbus 0000:02:0f.1: TI: mfunc 0x05033002, devctl 0x64
[ 33.285399] yenta_cardbus 0000:02:0f.1: ISA IRQ mask 0x0038, PCI irq 10
[ 33.285412] yenta_cardbus 0000:02:0f.1: Socket status: 30000006
[ 33.285429] yenta_cardbus 0000:02:0f.1: pcmcia: parent PCI bridge window: [io 0xe000-0xffff]
[ 33.285437] yenta_cardbus 0000:02:0f.1: pcmcia: parent PCI bridge window: [mem 0xf4000000-0xfbffffff]
[ 33.285444] pcmcia_socket pcmcia_socket1: cs: memory probe 0xf4000000-0xfbffffff:
[ 33.285455] excluding 0xf4000000-0xf47fffff 0xf8000000-0xf97fffff
[ 33.285484] yenta_cardbus 0000:02:0f.1: pcmcia: parent PCI bridge window: [mem 0x20000000-0x27ffffff pref]
[ 33.285490] pcmcia_socket pcmcia_socket1: cs: memory probe 0x20000000-0x27ffffff:
[ 33.285515] excluding 0x20000000-0x27ffffff
[ 33.286512] 3c59x: Donald Becker and others.
[ 33.286543] 0000:02:06.0: 3Com PCI 3c556 Laptop Tornado at e08f2c00.
[ 33.313450] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff:
[ 33.313476] excluding 0xc0000-0xd3fff 0xf0000-0xfffff
[ 33.313578] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff:
[ 33.313607] clean.
[ 33.313691] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff:
[ 33.313720] clean.
[ 33.361795] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 33.361820] excluding 0xc0000-0xd3fff 0xf0000-0xfffff
[ 33.361923] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 33.361952] clean.
[ 33.363595] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 33.363635] clean.
[ 33.376219] firewire_ohci 0000:02:0f.2: added OHCI v1.0 device as card 0, 4 IR + 4 IT contexts, quirks 0x2
[ 33.378626] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 33.378637] PCI: setting IRQ 5 as level-triggered
[ 33.492075] ifup[570]: Service network not started and mode 'auto' -> skipping
[ 33.600669] Adding 2104476k swap on /dev/sda1. Priority:0 extents:1 across:2104476k
[ 33.608318] boot.lvm[337]: Scanning for LVM volume groups...
[ 33.656648] boot.lvm[337]: No volume groups found
[ 33.714671] device-mapper: uevent: version 1.0.3
[ 33.715791] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel at redhat.com
[ 33.717172] boot.lvm[337]: No volume groups found
[ 33.741083] boot.lvm[337]: Reading all physical volumes. This may take a while...
[ 33.741927] boot.lvm[337]: Activating LVM volume groups...
[ 33.752444] boot.lvm[337]: No volume groups found
[ 33.754904] boot.lvm[337]: ..done
[ 33.877330] firewire_core 0000:02:0f.2: created device fw0: GUID 324fc00030d0a810, S400
[ 47.901735] CPUFREQ: ondemand sampling rate set to 300 ms
[ 48.297623] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 48.344672] eth0: setting full-duplex.
[ 48.395652] nf_conntrack version 0.5.0 (7811 buckets, 31244 max)
[ 48.490105] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 49.318353] NET: Registered protocol family 17
[ 56.069968] fuse init (API version 7.19)
[ 56.643725] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
More information about the dri-devel
mailing list