[PATCH v5] intel: wait render timeout implementation

[Daniel Vetter]

On Thu, Jun 07, 2012 at 09:12:41AM -0700, Ben Widawsky wrote:
> int drm_intel_gem_bo_wait(drm_intel_bo *bo, uint64_t timeout_ns)
> 
> This should bump the libdrm version. We're waiting for context support
> so we can do both features in one bump.
> 
> v2: don't return remaining timeout amount
> use get param and fallback for older kernels
> 
> v3: only doing getparam at init
> prototypes now have a signed input value
> 
> v4: update comments
> fall back to correct polling behavior with new userspace and old kernel
> 
> v5: since the drmIoctl patch was not well received, return appropriate
> values in this function instead. As Daniel pointed out, the polling
> case (timeout == 0) should also return -ETIME.
> 
> Cc: Eric Anholt <eric at anholt.net>
> Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
> Signed-off-by: Ben Widawsky <ben at bwidawsk.net>

Reviewed-by: Daniel Vetter <daniel.vetter at ffwll.ch>

> ---
>  intel/intel_bufmgr.h     |    1 +
>  intel/intel_bufmgr_gem.c |   57 ++++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 58 insertions(+)
> 
> diff --git a/intel/intel_bufmgr.h b/intel/intel_bufmgr.h
> index c197abc..fa6c4dd 100644
> --- a/intel/intel_bufmgr.h
> +++ b/intel/intel_bufmgr.h
> @@ -184,6 +184,7 @@ int drm_intel_get_pipe_from_crtc_id(drm_intel_bufmgr *bufmgr, int crtc_id);
>  
>  int drm_intel_get_aperture_sizes(int fd, size_t *mappable, size_t *total);
>  int drm_intel_bufmgr_gem_get_devid(drm_intel_bufmgr *bufmgr);
> +int drm_intel_gem_bo_wait(drm_intel_bo *bo, int64_t timeout_ns);
>  
>  /* drm_intel_bufmgr_fake.c */
>  drm_intel_bufmgr *drm_intel_bufmgr_fake_init(int fd,
> diff --git a/intel/intel_bufmgr_gem.c b/intel/intel_bufmgr_gem.c
> index b776d2f..e90f8bd 100644
> --- a/intel/intel_bufmgr_gem.c
> +++ b/intel/intel_bufmgr_gem.c
> @@ -119,6 +119,7 @@ typedef struct _drm_intel_bufmgr_gem {
>  	unsigned int has_blt : 1;
>  	unsigned int has_relaxed_fencing : 1;
>  	unsigned int has_llc : 1;
> +	unsigned int has_wait_timeout : 1;
>  	unsigned int bo_reuse : 1;
>  	unsigned int no_exec : 1;
>  	bool fenced_relocs;
> @@ -1479,6 +1480,58 @@ drm_intel_gem_bo_wait_rendering(drm_intel_bo *bo)
>  }
>  
>  /**
> + * Waits on a BO for the given amount of time.
> + *
> + * @bo: buffer object to wait for
> + * @timeout_ns: amount of time to wait in nanoseconds.
> + *   If value is less than 0, an infinite wait will occur.
> + *
> + * Returns 0 if the wait was successful ie. the last batch referencing the
> + * object has completed within the allotted time. Otherwise some negative return
> + * value describes the error. Of particular interest is -ETIME when the wait has
> + * failed to yield the desired result.
> + *
> + * Similar to drm_intel_gem_bo_wait_rendering except a timeout parameter allows
> + * the operation to give up after a certain amount of time. Another subtle
> + * difference is the internal locking semantics are different (this variant does
> + * not hold the lock for the duration of the wait). This makes the wait subject
> + * to a larger userspace race window.
> + *
> + * The implementation shall wait until the object is no longer actively
> + * referenced within a batch buffer at the time of the call. The wait will
> + * not guarantee that the buffer is re-issued via another thread, or an flinked
> + * handle. Userspace must make sure this race does not occur if such precision
> + * is important.
> + */
> +int drm_intel_gem_bo_wait(drm_intel_bo *bo, int64_t timeout_ns)
> +{
> +	drm_intel_bufmgr_gem *bufmgr_gem = (drm_intel_bufmgr_gem *) bo->bufmgr;
> +	drm_intel_bo_gem *bo_gem = (drm_intel_bo_gem *) bo;
> +	struct drm_i915_gem_wait wait;
> +	int ret;
> +
> +	if (!bufmgr_gem->has_wait_timeout) {
> +		DBG("%s:%d: Timed wait is not supported. Falling back to "
> +		    "infinite wait\n", __FILE__, __LINE__);
> +		if (timeout_ns) {
> +			drm_intel_gem_bo_wait_rendering(bo);
> +			return 0;
> +		} else {
> +			return drm_intel_gem_bo_busy(bo) ? -ETIME : 0;
> +		}
> +	}
> +
> +	wait.bo_handle = bo_gem->gem_handle;
> +	wait.timeout_ns = timeout_ns;
> +	wait.flags = 0;
> +	ret = drmIoctl(bufmgr_gem->fd, DRM_IOCTL_I915_GEM_WAIT, &wait);
> +	if (ret == -1)
> +		return -errno;
> +
> +	return ret;
> +}
> +
> +/**
>   * Sets the object to the GTT read and possibly write domain, used by the X
>   * 2D driver in the absence of kernel support to do drm_intel_gem_bo_map_gtt().
>   *
> @@ -2898,6 +2951,10 @@ drm_intel_bufmgr_gem_init(int fd, int batch_size)
>  	ret = drmIoctl(bufmgr_gem->fd, DRM_IOCTL_I915_GETPARAM, &gp);
>  	bufmgr_gem->has_relaxed_fencing = ret == 0;
>  
> +	gp.param = I915_PARAM_HAS_WAIT_TIMEOUT;
> +	ret = drmIoctl(bufmgr_gem->fd, DRM_IOCTL_I915_GETPARAM, &gp);
> +	bufmgr_gem->has_wait_timeout = ret == 0;
> +
>  	gp.param = I915_PARAM_HAS_LLC;
>  	ret = drmIoctl(bufmgr_gem->fd, DRM_IOCTL_I915_GETPARAM, &gp);
>  	if (ret != 0) {
> -- 
> 1.7.10.3
> 

-- 
Daniel Vetter
Mail: daniel at ffwll.ch
Mobile: +41 (0)79 365 57 48