Linux 3.2: After resume screen only turned on after switching terminals
Paul Menzel
paulepanter at users.sourceforge.net
Mon Jun 25 12:14:07 PDT 2012
Dear Linux folks,
resuming from suspend to RAM the monitor was indicating by a blinking
LED that it did not receive any signal. This is the first time this
happened. Resuming from suspend to RAM had worked without problems
before (and probably will work again the next tries).
Logging in from SSH worked fine though. Switching terminal to tty1
nothing changed but going back to tty7, where X was supposed to run),
and the monitor detected a signal and showed the screensaver.
Switching to tty1 still does not work though, that means the monitor
indicates that it gets no signal.
The motherboard is an ASRock A780FullHD [1] and the OS is Debian
Sid/unstable.
I attach the output of `dmesg` and `/var/log/Xorg.0.log`.
Thanks,
Paul
[1] http://www.asrock.com/mb/overview.asp?model=a780fullhd
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-2-686-pae (Debian 3.2.20-1) (debian-kernel at lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-7) ) #1 SMP Mon Jun 11 18:27:04 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfeb0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfeb0000 - 00000000cfec0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfec0000 - 00000000cfef0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./A780FullHD, BIOS P1.00 08/01/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000130000000 aka 4864M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[ 0.000000] RAMDISK: 368ee000 - 3746f000
[ 0.000000] ACPI: RSDP 000fa160 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT cfeb0000 00038 (v01 080108 RSDT2148 20080801 MSFT 00000097)
[ 0.000000] ACPI: FACP cfeb0200 00084 (v02 A M I OEMFACP 12000601 MSFT 00000097)
[ 0.000000] ACPI: DSDT cfeb0440 07737 (v01 AS146 AS146012 00000012 INTL 20051117)
[ 0.000000] ACPI: FACS cfec0000 00040
[ 0.000000] ACPI: APIC cfeb0390 0006C (v01 080108 APIC2148 20080801 MSFT 00000097)
[ 0.000000] ACPI: MCFG cfeb0400 0003C (v01 080108 OEMMCFG 20080801 MSFT 00000097)
[ 0.000000] ACPI: OEMB cfec0040 00071 (v01 080108 OEMB2148 20080801 MSFT 00000097)
[ 0.000000] ACPI: SSDT cfeb7b80 0028A (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 3718MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cfeb0
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 982591
[ 0.000000] free_area_init_node: node 0, pgdat c1411d80, node_mem_map f44ee200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 7437 pages used for memmap
[ 0.000000] HighMem zone: 747429 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:30000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f79b3000 s33024 r0 d24320 u57344
[ 0.000000] pcpu-alloc: s33024 r0 d24320 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 973374
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-686-pae root=/dev/mapper/speicher-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:00120000)
[ 0.000000] Memory: 3875392k/4718592k available (2845k kernel code, 54972k reserved, 1352k data, 416k init, 3019464k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc141a000 - 0xc1482000 ( 416 kB)
[ 0.000000] .data : 0xc12c75ec - 0xc1419640 (1352 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12c75ec (2845 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f4006000 soft=f4008000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2494.400 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.80 BogoMIPS (lpj=9977600)
[ 0.004010] pid_max: default: 32768 minimum: 301
[ 0.004059] Security Framework initialized
[ 0.004067] AppArmor: AppArmor disabled by boot time parameter
[ 0.004086] Mount-cache hash table entries: 512
[ 0.004236] Initializing cgroup subsys cpuacct
[ 0.004242] Initializing cgroup subsys memory
[ 0.004252] Initializing cgroup subsys devices
[ 0.004254] Initializing cgroup subsys freezer
[ 0.004257] Initializing cgroup subsys net_cls
[ 0.004260] Initializing cgroup subsys blkio
[ 0.004267] Initializing cgroup subsys perf_event
[ 0.004298] CPU: Physical Processor ID: 0
[ 0.004300] CPU: Processor Core ID: 0
[ 0.004303] mce: CPU supports 5 MCE banks
[ 0.004315] using AMD E400 aware idle routine
[ 0.008252] ACPI: Core revision 20110623
[ 0.011297] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.011675] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.051363] CPU0: AMD Athlon(tm) Dual Core Processor 4850e stepping 02
[ 0.052002] Performance Events: AMD PMU driver.
[ 0.052002] ... version: 0
[ 0.052002] ... bit width: 48
[ 0.052002] ... generic registers: 4
[ 0.052002] ... value mask: 0000ffffffffffff
[ 0.052002] ... max period: 00007fffffffffff
[ 0.052002] ... fixed-purpose events: 0
[ 0.052002] ... event mask: 000000000000000f
[ 0.052002] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.052002] CPU 1 irqstacks, hard=f4094000 soft=f4096000
[ 0.052002] Booting Node 0, Processors #1
[ 0.052002] smpboot cpu 1: start_ip = 9b000
[ 0.008000] Initializing CPU#1
[ 0.136134] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.136156] Brought up 2 CPUs
[ 0.136159] Total of 2 processors activated (9978.31 BogoMIPS).
[ 0.136820] devtmpfs: initialized
[ 0.136820] PM: Registering ACPI NVS region at cfec0000 (196608 bytes)
[ 0.136820] print_constraints: dummy:
[ 0.136820] NET: Registered protocol family 16
[ 0.136820] node 0 link 0: io port [1000, ffffff]
[ 0.136820] TOM: 00000000d0000000 aka 3328M
[ 0.136820] node 0 link 0: mmio [a0000, bffff]
[ 0.136820] node 0 link 0: mmio [d0000000, efffffff]
[ 0.136820] node 0 link 0: mmio [f0000000, fddfffff]
[ 0.136820] node 0 link 0: mmio [fde00000, fdefffff]
[ 0.136820] node 0 link 0: mmio [fdf00000, ffefffff]
[ 0.136820] TOM2: 0000000130000000 aka 4864M
[ 0.136820] bus: [00, 07] on node 0 link 0
[ 0.136820] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.136820] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.136820] bus: 00 index 2 [mem 0xd0000000-0xffffffff]
[ 0.136820] bus: 00 index 3 [mem 0x130000000-0xfcffffffff]
[ 0.136820] ACPI: bus type pci registered
[ 0.136820] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.136820] PCI: not using MMCONFIG
[ 0.137225] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
[ 0.137302] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.137303] PCI: Using configuration type 1 for base access
[ 0.137886] bio: create slab <bio-0> at 0
[ 0.137886] ACPI: Added _OSI(Module Device)
[ 0.137886] ACPI: Added _OSI(Processor Device)
[ 0.137886] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.137886] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.140054] ACPI: EC: Look up EC in DSDT
[ 0.141069] ACPI: Executed 4 blocks of module-level executable AML code
[ 0.156286] ACPI: Interpreter enabled
[ 0.156294] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.156318] ACPI: Using IOAPIC for interrupt routing
[ 0.156340] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.157113] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.157115] PCI: Using MMCONFIG for extended config space
[ 0.161913] ACPI: No dock devices found.
[ 0.161915] HEST: Table not found.
[ 0.161921] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.162120] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.162312] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.162314] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.162317] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.162320] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.162322] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xdfffffff]
[ 0.162325] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.162331] pci_root PNP0A03:00: ignoring host bridge window [mem 0x000d0000-0x000dffff] (conflicts with Adapter ROM [mem 0x000cf000-0x000d09ff])
[ 0.162352] pci 0000:00:00.0: [1022:9600] type 0 class 0x000600
[ 0.162415] pci 0000:00:01.0: [1849:9602] type 1 class 0x000604
[ 0.162465] pci 0000:00:09.0: [1022:9608] type 1 class 0x000604
[ 0.162508] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.162511] pci 0000:00:09.0: PME# disabled
[ 0.162528] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604
[ 0.162568] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.162571] pci 0000:00:0a.0: PME# disabled
[ 0.162602] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.162623] pci 0000:00:11.0: reg 10: [io 0xb000-0xb007]
[ 0.162634] pci 0000:00:11.0: reg 14: [io 0xa000-0xa003]
[ 0.162645] pci 0000:00:11.0: reg 18: [io 0x9000-0x9007]
[ 0.162656] pci 0000:00:11.0: reg 1c: [io 0x8000-0x8003]
[ 0.162667] pci 0000:00:11.0: reg 20: [io 0x7000-0x700f]
[ 0.162678] pci 0000:00:11.0: reg 24: [mem 0xfddff800-0xfddffbff]
[ 0.162742] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.162757] pci 0000:00:12.0: reg 10: [mem 0xfddfe000-0xfddfefff]
[ 0.162830] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[ 0.162845] pci 0000:00:12.1: reg 10: [mem 0xfddfd000-0xfddfdfff]
[ 0.162923] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.162944] pci 0000:00:12.2: reg 10: [mem 0xfddff000-0xfddff0ff]
[ 0.163034] pci 0000:00:12.2: supports D1 D2
[ 0.163037] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.163042] pci 0000:00:12.2: PME# disabled
[ 0.163067] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.163082] pci 0000:00:13.0: reg 10: [mem 0xfddfc000-0xfddfcfff]
[ 0.163154] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[ 0.163169] pci 0000:00:13.1: reg 10: [mem 0xfddf7000-0xfddf7fff]
[ 0.163248] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.163269] pci 0000:00:13.2: reg 10: [mem 0xfddf6800-0xfddf68ff]
[ 0.163359] pci 0000:00:13.2: supports D1 D2
[ 0.163361] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.163365] pci 0000:00:13.2: PME# disabled
[ 0.163393] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.163504] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.163522] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.163533] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.163543] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.163554] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.163564] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 0.163630] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.163654] pci 0000:00:14.2: reg 10: [mem 0xfddf0000-0xfddf3fff 64bit]
[ 0.163726] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.163731] pci 0000:00:14.2: PME# disabled
[ 0.163747] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.163831] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.163880] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.163895] pci 0000:00:14.5: reg 10: [mem 0xfddf5000-0xfddf5fff]
[ 0.163970] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.163991] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.164017] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.164034] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.164087] pci 0000:01:05.0: [1002:9610] type 0 class 0x000300
[ 0.164097] pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[ 0.164103] pci 0000:01:05.0: reg 14: [io 0xc000-0xc0ff]
[ 0.164108] pci 0000:01:05.0: reg 18: [mem 0xfdff0000-0xfdffffff]
[ 0.164119] pci 0000:01:05.0: reg 24: [mem 0xfde00000-0xfdefffff]
[ 0.164139] pci 0000:01:05.0: supports D1 D2
[ 0.164182] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.164186] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.164190] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdffffff]
[ 0.164194] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.164222] pci 0000:00:09.0: PCI bridge to [bus 02-03]
[ 0.164226] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 0.164230] pci 0000:00:09.0: bridge window [mem 0xfe000000-0xfeafffff]
[ 0.164234] pci 0000:00:09.0: bridge window [mem 0xfa000000-0xfcefffff 64bit pref]
[ 0.164277] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
[ 0.164291] pci 0000:04:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.164313] pci 0000:04:00.0: reg 18: [mem 0xfcfff000-0xfcffffff 64bit pref]
[ 0.164328] pci 0000:04:00.0: reg 20: [mem 0xfcfe0000-0xfcfeffff 64bit pref]
[ 0.164338] pci 0000:04:00.0: reg 30: [mem 0xfebf0000-0xfebfffff pref]
[ 0.164388] pci 0000:04:00.0: supports D1 D2
[ 0.164390] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.164395] pci 0000:04:00.0: PME# disabled
[ 0.172025] pci 0000:00:0a.0: PCI bridge to [bus 04-04]
[ 0.172029] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.172033] pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.172037] pci 0000:00:0a.0: bridge window [mem 0xfcf00000-0xfcffffff 64bit pref]
[ 0.172102] pci 0000:00:14.4: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.172113] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.172115] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.172118] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.172121] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode)
[ 0.172124] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.172138] pci_bus 0000:00: on NUMA node 0
[ 0.172141] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.172397] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.172447] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.172492] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.172565] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 0.172711] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.173027] pci0000:00: ACPI _OSC control (0x18) granted
[ 0.178162] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[ 0.178205] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
[ 0.178245] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 12 14 15)
[ 0.178286] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 0.178325] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.178365] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.178406] ACPI: PCI Interrupt Link [LNKG] (IRQs *4 10 11 12 14 15)
[ 0.178446] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.178561] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.178561] vgaarb: loaded
[ 0.178561] vgaarb: bridge control possible 0000:01:05.0
[ 0.178561] PCI: Using ACPI for IRQ routing
[ 0.178561] PCI: pci_cache_line_size set to 64 bytes
[ 0.178561] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.178561] reserve RAM buffer: 00000000cfeb0000 - 00000000cfffffff
[ 0.180669] pnp: PnP ACPI init
[ 0.180694] ACPI: bus type pnp registered
[ 0.180848] pnp 00:00: [bus 00-ff]
[ 0.180851] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.180853] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.180856] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.180858] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.180861] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.180864] pnp 00:00: [mem 0xcff00000-0xdfffffff window]
[ 0.180866] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.180937] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.181028] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.181031] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.181102] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.181150] pnp 00:02: [dma 4]
[ 0.181152] pnp 00:02: [io 0x0000-0x000f]
[ 0.181154] pnp 00:02: [io 0x0081-0x0083]
[ 0.181156] pnp 00:02: [io 0x0087]
[ 0.181158] pnp 00:02: [io 0x0089-0x008b]
[ 0.181160] pnp 00:02: [io 0x008f]
[ 0.181162] pnp 00:02: [io 0x00c0-0x00df]
[ 0.181193] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.181204] pnp 00:03: [io 0x0070-0x0071]
[ 0.181220] pnp 00:03: [irq 8]
[ 0.181251] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.181259] pnp 00:04: [io 0x0061]
[ 0.181288] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.181296] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.181301] pnp 00:05: [irq 13]
[ 0.181331] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.181560] pnp 00:06: [mem 0xfed00000-0xfed003ff]
[ 0.181594] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.181635] pnp 00:07: [mem 0xfec00000-0xfec00fff]
[ 0.181638] pnp 00:07: [mem 0xfee00000-0xfee00fff]
[ 0.181690] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.181693] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.181696] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.181792] pnp 00:08: [io 0x0010-0x001f]
[ 0.181795] pnp 00:08: [io 0x0022-0x003f]
[ 0.181797] pnp 00:08: [io 0x0062-0x0063]
[ 0.181799] pnp 00:08: [io 0x0065-0x006f]
[ 0.181801] pnp 00:08: [io 0x0072-0x007f]
[ 0.181803] pnp 00:08: [io 0x0080]
[ 0.181805] pnp 00:08: [io 0x0084-0x0086]
[ 0.181807] pnp 00:08: [io 0x0088]
[ 0.181809] pnp 00:08: [io 0x008c-0x008e]
[ 0.181811] pnp 00:08: [io 0x0090-0x009f]
[ 0.181813] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.181815] pnp 00:08: [io 0x00b1]
[ 0.181817] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.181820] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.181822] pnp 00:08: [io 0x040b]
[ 0.181824] pnp 00:08: [io 0x04d6]
[ 0.181826] pnp 00:08: [io 0x0c00-0x0c01]
[ 0.181828] pnp 00:08: [io 0x0c14]
[ 0.181830] pnp 00:08: [io 0x0c50-0x0c51]
[ 0.181832] pnp 00:08: [io 0x0c52]
[ 0.181834] pnp 00:08: [io 0x0c6c]
[ 0.181836] pnp 00:08: [io 0x0c6f]
[ 0.181839] pnp 00:08: [io 0x0cd0-0x0cd1]
[ 0.181842] pnp 00:08: [io 0x0cd2-0x0cd3]
[ 0.181844] pnp 00:08: [io 0x0cd4-0x0cd5]
[ 0.181846] pnp 00:08: [io 0x0cd6-0x0cd7]
[ 0.181848] pnp 00:08: [io 0x0cd8-0x0cdf]
[ 0.181850] pnp 00:08: [io 0x0800-0x089f]
[ 0.181852] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 0.181855] pnp 00:08: [io 0x0b00-0x0b0f]
[ 0.181857] pnp 00:08: [io 0x0b20-0x0b3f]
[ 0.181859] pnp 00:08: [io 0x0900-0x090f]
[ 0.181861] pnp 00:08: [io 0x0910-0x091f]
[ 0.181863] pnp 00:08: [io 0xfe00-0xfefe]
[ 0.181865] pnp 00:08: [mem 0xffb80000-0xffbfffff]
[ 0.181868] pnp 00:08: [mem 0xfec10000-0xfec1001f]
[ 0.181956] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.181959] system 00:08: [io 0x040b] has been reserved
[ 0.181962] system 00:08: [io 0x04d6] has been reserved
[ 0.181965] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.181968] system 00:08: [io 0x0c14] has been reserved
[ 0.181971] system 00:08: [io 0x0c50-0x0c51] has been reserved
[ 0.181974] system 00:08: [io 0x0c52] has been reserved
[ 0.181977] system 00:08: [io 0x0c6c] has been reserved
[ 0.181979] system 00:08: [io 0x0c6f] has been reserved
[ 0.181982] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
[ 0.181985] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
[ 0.181988] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 0.181992] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 0.181995] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 0.181997] system 00:08: [io 0x0800-0x089f] has been reserved
[ 0.182000] system 00:08: [io 0x0b00-0x0b0f] has been reserved
[ 0.182003] system 00:08: [io 0x0b20-0x0b3f] has been reserved
[ 0.182006] system 00:08: [io 0x0900-0x090f] has been reserved
[ 0.182009] system 00:08: [io 0x0910-0x091f] has been reserved
[ 0.182012] system 00:08: [io 0xfe00-0xfefe] has been reserved
[ 0.182016] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.182019] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.182022] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.182205] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.182208] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.182210] pnp 00:09: [io 0x0290-0x029f]
[ 0.182260] system 00:09: [io 0x0290-0x029f] has been reserved
[ 0.182263] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.182294] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 0.182343] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.182346] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.182486] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[ 0.182489] pnp 00:0b: [mem 0x000c0000-0x000cffff]
[ 0.182491] pnp 00:0b: [mem 0x000e0000-0x000fffff]
[ 0.182493] pnp 00:0b: [mem 0x00100000-0xcfefffff]
[ 0.182496] pnp 00:0b: [mem 0xfec00000-0xffffffff]
[ 0.182549] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.182552] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.182555] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.182558] system 00:0b: [mem 0x00100000-0xcfefffff] could not be reserved
[ 0.182561] system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.182564] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.182665] pnp: PnP ACPI: found 12 devices
[ 0.182667] ACPI: ACPI bus type pnp unregistered
[ 0.182670] PnPBIOS: Disabled by ACPI PNP
[ 0.219626] Switching to clocksource acpi_pm
[ 0.219654] PCI: max bus depth: 1 pci_try_num: 2
[ 0.219679] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.219682] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.219686] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdffffff]
[ 0.219689] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.219694] pci 0000:00:09.0: PCI bridge to [bus 02-03]
[ 0.219697] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 0.219700] pci 0000:00:09.0: bridge window [mem 0xfe000000-0xfeafffff]
[ 0.219704] pci 0000:00:09.0: bridge window [mem 0xfa000000-0xfcefffff 64bit pref]
[ 0.219708] pci 0000:00:0a.0: PCI bridge to [bus 04-04]
[ 0.219711] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.219715] pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.219718] pci 0000:00:0a.0: bridge window [mem 0xfcf00000-0xfcffffff 64bit pref]
[ 0.219723] pci 0000:00:14.4: PCI bridge to [bus 05-05]
[ 0.219756] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.219759] pci 0000:00:09.0: setting latency timer to 64
[ 0.219768] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.219771] pci 0000:00:0a.0: setting latency timer to 64
[ 0.219779] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.219782] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.219784] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.219787] pci_bus 0000:00: resource 7 [mem 0xcff00000-0xdfffffff]
[ 0.219789] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff]
[ 0.219792] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.219795] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdffffff]
[ 0.219798] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.219801] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.219803] pci_bus 0000:02: resource 1 [mem 0xfe000000-0xfeafffff]
[ 0.219805] pci_bus 0000:02: resource 2 [mem 0xfa000000-0xfcefffff 64bit pref]
[ 0.219808] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.219811] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.219813] pci_bus 0000:04: resource 2 [mem 0xfcf00000-0xfcffffff 64bit pref]
[ 0.219816] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.219819] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.219821] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.219823] pci_bus 0000:05: resource 7 [mem 0xcff00000-0xdfffffff]
[ 0.219826] pci_bus 0000:05: resource 8 [mem 0xf0000000-0xfebfffff]
[ 0.219908] NET: Registered protocol family 2
[ 0.219998] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.219998] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.219998] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.219998] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.219998] TCP reno registered
[ 0.219998] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.219998] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.219998] NET: Registered protocol family 1
[ 0.219998] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.219998] pci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.320030] pci 0000:00:12.0: PCI INT A disabled
[ 0.320040] pci 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.400026] pci 0000:00:12.1: PCI INT A disabled
[ 0.400035] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.400051] pci 0000:00:12.2: PCI INT B disabled
[ 0.400058] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.480027] pci 0000:00:13.0: PCI INT A disabled
[ 0.480035] pci 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.552026] pci 0000:00:13.1: PCI INT A disabled
[ 0.552039] pci 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.552055] pci 0000:00:13.2: PCI INT B disabled
[ 0.552076] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.624026] pci 0000:00:14.5: PCI INT C disabled
[ 0.624039] pci 0000:01:05.0: Boot video device
[ 0.624045] PCI: CLS 64 bytes, default 64
[ 0.624119] Unpacking initramfs...
[ 0.932916] Freeing initrd memory: 11780k freed
[ 0.943853] audit: initializing netlink socket (disabled)
[ 0.943878] type=2000 audit(1340629377.940:1): initialized
[ 0.969353] highmem bounce pool size: 64 pages
[ 0.969358] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.991983] VFS: Disk quotas dquot_6.5.2
[ 0.992036] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.992112] msgmni has been set to 1694
[ 0.992337] alg: No test for stdrng (krng)
[ 0.992385] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.992390] io scheduler noop registered
[ 0.992392] io scheduler deadline registered
[ 0.992411] io scheduler cfq registered (default)
[ 0.992520] pcieport 0000:00:09.0: setting latency timer to 64
[ 0.992557] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[ 0.992613] pcieport 0000:00:0a.0: setting latency timer to 64
[ 0.992638] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 0.992713] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.992744] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.992746] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.992921] acpiphp: Slot [1] registered
[ 0.993047] ERST: Table is not found!
[ 0.993048] GHES: HEST is not enabled!
[ 0.993061] isapnp: Scanning for PnP cards...
[ 1.346837] isapnp: No Plug & Play device found
[ 1.346929] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.352359] hpet_acpi_add: no address or irqs in _CRS
[ 1.352372] Linux agpgart interface v0.103
[ 1.352764] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.355496] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.355503] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.355608] mousedev: PS/2 mouse device common for all mice
[ 1.355663] rtc_cmos 00:03: RTC can wake from S4
[ 1.355789] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.355818] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 1.355833] cpuidle: using governor ladder
[ 1.355835] cpuidle: using governor menu
[ 1.356082] TCP cubic registered
[ 1.356137] NET: Registered protocol family 10
[ 1.356685] Mobile IPv6
[ 1.356687] NET: Registered protocol family 17
[ 1.356691] Registering the dns_resolver key type
[ 1.356716] Using IPI No-Shortcut mode
[ 1.356867] PM: Hibernation image not present or could not be loaded.
[ 1.356882] registered taskstats version 1
[ 1.368202] rtc_cmos 00:03: setting system clock to 2012-06-25 13:02:59 UTC (1340629379)
[ 1.368253] Initializing network drop monitor service
[ 1.368379] Freeing unused kernel memory: 416k freed
[ 1.368675] Write protecting the kernel text: 2848k
[ 1.368708] Write protecting the kernel read-only data: 1092k
[ 1.368710] NX-protecting the kernel data: 3296k
[ 1.439112] udevd[52]: starting version 175
[ 1.495587] usbcore: registered new interface driver usbfs
[ 1.495618] usbcore: registered new interface driver hub
[ 1.501688] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.501713] r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.501742] r8169 0000:04:00.0: setting latency timer to 64
[ 1.501789] r8169 0000:04:00.0: irq 42 for MSI/MSI-X
[ 1.502309] r8169 0000:04:00.0: eth0: RTL8168c/8111c at 0xf820a000, 00:19:66:8b:09:1a, XID 1c4000c0 IRQ 42
[ 1.502312] r8169 0000:04:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 1.503389] SCSI subsystem initialized
[ 1.517565] usbcore: registered new device driver usb
[ 1.518119] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.518151] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.518177] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.518208] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.518220] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.518250] QUIRK: Enable AMD PLL fix
[ 1.518253] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[ 1.518268] ehci_hcd 0000:00:12.2: debug port 1
[ 1.518297] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfddff000
[ 1.518722] libata version 3.00 loaded.
[ 1.528085] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.528156] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.528159] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.528162] usb usb1: Product: EHCI Host Controller
[ 1.528164] usb usb1: Manufacturer: Linux 3.2.0-2-686-pae ehci_hcd
[ 1.528166] usb usb1: SerialNumber: 0000:00:12.2
[ 1.529851] hub 1-0:1.0: USB hub found
[ 1.529862] hub 1-0:1.0: 6 ports detected
[ 1.529990] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.530019] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.530032] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.530043] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.530070] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[ 1.530085] ehci_hcd 0000:00:13.2: debug port 1
[ 1.530120] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfddf6800
[ 1.532510] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.540076] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.540114] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.540117] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.540120] usb usb2: Product: EHCI Host Controller
[ 1.540122] usb usb2: Manufacturer: Linux 3.2.0-2-686-pae ehci_hcd
[ 1.540124] usb usb2: SerialNumber: 0000:00:13.2
[ 1.541144] hub 2-0:1.0: USB hub found
[ 1.541151] hub 2-0:1.0: 6 ports detected
[ 1.541634] ahci 0000:00:11.0: version 3.0
[ 1.541668] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.541871] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.541875] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.551328] scsi0 : ahci
[ 1.557479] scsi1 : ahci
[ 1.557610] scsi2 : ahci
[ 1.559293] scsi3 : ahci
[ 1.559418] scsi4 : ahci
[ 1.559491] scsi5 : ahci
[ 1.559559] ata1: SATA max UDMA/133 abar m1024 at 0xfddff800 port 0xfddff900 irq 22
[ 1.559563] ata2: SATA max UDMA/133 abar m1024 at 0xfddff800 port 0xfddff980 irq 22
[ 1.559567] ata3: SATA max UDMA/133 abar m1024 at 0xfddff800 port 0xfddffa00 irq 22
[ 1.559571] ata4: SATA max UDMA/133 abar m1024 at 0xfddff800 port 0xfddffa80 irq 22
[ 1.559574] ata5: SATA max UDMA/133 abar m1024 at 0xfddff800 port 0xfddffb00 irq 22
[ 1.559578] ata6: SATA max UDMA/133 abar m1024 at 0xfddff800 port 0xfddffb80 irq 22
[ 1.559659] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.559689] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.559706] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.559747] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfddfe000
[ 1.616059] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.616064] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.616067] usb usb3: Product: OHCI Host Controller
[ 1.616070] usb usb3: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd
[ 1.616072] usb usb3: SerialNumber: 0000:00:12.0
[ 1.616244] hub 3-0:1.0: USB hub found
[ 1.616252] hub 3-0:1.0: 3 ports detected
[ 1.616584] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.616612] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.616624] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.616648] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfddfd000
[ 1.676036] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.676039] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.676041] usb usb4: Product: OHCI Host Controller
[ 1.676043] usb usb4: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd
[ 1.676046] usb usb4: SerialNumber: 0000:00:12.1
[ 1.676200] hub 4-0:1.0: USB hub found
[ 1.676207] hub 4-0:1.0: 3 ports detected
[ 1.676927] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.676980] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 1.677390] scsi6 : pata_atiixp
[ 1.677464] scsi7 : pata_atiixp
[ 1.678159] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.678162] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.678218] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.678244] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.678261] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.678299] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfddfc000
[ 1.736044] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.736047] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.736050] usb usb5: Product: OHCI Host Controller
[ 1.736052] usb usb5: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd
[ 1.736054] usb usb5: SerialNumber: 0000:00:13.0
[ 1.736211] hub 5-0:1.0: USB hub found
[ 1.736219] hub 5-0:1.0: 3 ports detected
[ 1.736289] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.736303] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.736310] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.736331] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfddf7000
[ 1.796060] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.796063] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.796065] usb usb6: Product: OHCI Host Controller
[ 1.796067] usb usb6: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd
[ 1.796069] usb usb6: SerialNumber: 0000:00:13.1
[ 1.796198] hub 6-0:1.0: USB hub found
[ 1.796204] hub 6-0:1.0: 3 ports detected
[ 1.796541] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.796556] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.796565] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.796585] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfddf5000
[ 1.848580] ata8.00: ATAPI: TOSHIBA DVD-ROM SD-M1712, 1004, max UDMA/33
[ 1.848588] ata8.01: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL12, max UDMA/33
[ 1.856053] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.856056] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.856059] usb usb7: Product: OHCI Host Controller
[ 1.856061] usb usb7: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd
[ 1.856063] usb usb7: SerialNumber: 0000:00:14.5
[ 1.856259] hub 7-0:1.0: USB hub found
[ 1.856266] hub 7-0:1.0: 2 ports detected
[ 1.864549] ata8.00: configured for UDMA/33
[ 1.876045] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.876085] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.876123] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.876176] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.876211] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.880433] ata8.01: configured for UDMA/33
[ 2.048027] ata1: softreset failed (device not ready)
[ 2.048072] ata1: applying PMP SRST workaround and retrying
[ 2.216022] usb 3-2: new low-speed USB device number 2 using ohci_hcd
[ 2.220034] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.226146] ata1.00: ATA-8: WDC WD20EARS-60MVWB0, 51.0AB51, max UDMA/100
[ 2.226149] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.232196] ata1.00: configured for UDMA/100
[ 2.232324] scsi 0:0:0:0: Direct-Access ATA WDC WD20EARS-60M 51.0 PQ: 0 ANSI: 5
[ 2.287551] scsi 7:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-M1712 1004 PQ: 0 ANSI: 5
[ 2.291458] scsi 7:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL12 PQ: 0 ANSI: 5
[ 2.302192] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 2.302197] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.302240] sd 0:0:0:0: [sda] Write Protect is off
[ 2.302243] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.302267] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.319893] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 2.319898] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.320126] sr 7:0:0:0: Attached scsi CD-ROM sr0
[ 2.325106] sda: sda1 sda2
[ 2.325487] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.327243] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.327396] sr 7:0:1:0: Attached scsi CD-ROM sr1
[ 2.381097] usb 3-2: New USB device found, idVendor=1241, idProduct=1122
[ 2.381103] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.393383] input: HID 1241:1122 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input0
[ 2.393485] generic-usb 0003:1241:1122.0001: input,hidraw0: USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:12.0-2/input0
[ 2.393511] usbcore: registered new interface driver usbhid
[ 2.393514] usbhid: USB HID core driver
[ 2.644039] usb 4-2: new low-speed USB device number 2 using ohci_hcd
[ 2.705368] md: raid1 personality registered for level 1
[ 2.770483] mdadm: sending ioctl 800c0910 to a partition!
[ 2.770488] mdadm: sending ioctl 800c0910 to a partition!
[ 2.770500] mdadm: sending ioctl 1261 to a partition!
[ 2.770502] mdadm: sending ioctl 1261 to a partition!
[ 2.770704] mdadm: sending ioctl 1261 to a partition!
[ 2.770706] mdadm: sending ioctl 1261 to a partition!
[ 2.770834] mdadm: sending ioctl 1261 to a partition!
[ 2.770836] mdadm: sending ioctl 1261 to a partition!
[ 2.770951] mdadm: sending ioctl 1261 to a partition!
[ 2.770953] mdadm: sending ioctl 1261 to a partition!
[ 2.774018] md: md0 stopped.
[ 2.774992] md: bind<sda1>
[ 2.776690] bio: create slab <bio-1> at 1
[ 2.776764] md/raid1:md0: active with 1 out of 2 mirrors
[ 2.776795] md0: detected capacity change from 0 to 509804544
[ 2.778380] md0: unknown partition table
[ 2.806888] md: md1 stopped.
[ 2.807478] md: bind<sda2>
[ 2.809378] md/raid1:md1: active with 1 out of 2 mirrors
[ 2.809410] md1: detected capacity change from 0 to 1999886286848
[ 2.811609] md1: unknown partition table
[ 2.815216] device-mapper: uevent: version 1.0.3
[ 2.815568] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel at redhat.com
[ 2.817102] usb 4-2: New USB device found, idVendor=046d, idProduct=c30f
[ 2.817107] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.817110] usb 4-2: Product: Logitech USB Keyboard
[ 2.817112] usb 4-2: Manufacturer: Logitech
[ 2.825437] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input1
[ 2.825514] generic-usb 0003:046D:C30F.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:12.1-2/input0
[ 2.838161] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.1/input/input2
[ 2.838205] generic-usb 0003:046D:C30F.0003: input,hidraw2: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:12.1-2/input1
[ 3.100025] usb 4-3: new full-speed USB device number 3 using ohci_hcd
[ 3.267106] usb 4-3: New USB device found, idVendor=058f, idProduct=9254
[ 3.267109] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.267111] usb 4-3: Product: Generic USB Hub
[ 3.267113] usb 4-3: Manufacturer: ALCOR
[ 3.269150] hub 4-3:1.0: USB hub found
[ 3.271106] hub 4-3:1.0: 4 ports detected
[ 17.228048] Intel AES-NI instructions are not detected.
[ 29.917656] scsi_verify_blk_ioctl: 60 callbacks suppressed
[ 29.917661] mdadm: sending ioctl 1261 to a partition!
[ 29.917665] mdadm: sending ioctl 1261 to a partition!
[ 30.828596] fstype: sending ioctl 540f to a partition!
[ 30.945625] PM: Starting manual resume from disk
[ 30.945631] PM: Hibernation image partition 253:2 present
[ 30.945633] PM: Looking for hibernation image.
[ 30.945919] PM: Image not found (code -22)
[ 30.945924] PM: Hibernation image not present or could not be loaded.
[ 30.955584] kjournald starting. Commit interval 5 seconds
[ 30.955619] EXT3-fs (dm-1): mounted filesystem with ordered data mode
[ 32.220800] udevd[440]: starting version 175
[ 32.521563] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 32.521574] ACPI: Power Button [PWRB]
[ 32.521650] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 32.521654] ACPI: Power Button [PWRF]
[ 32.534302] wmi: Mapper loaded
[ 32.566008] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 32.568564] udevd[488]: renamed network interface eth0 to eth3
[ 32.887906] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 32.903774] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
[ 32.903780] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 33.088462] [drm] Initialized drm 1.1.0 20060810
[ 33.144790] mdadm: sending ioctl 1261 to a partition!
[ 33.144795] mdadm: sending ioctl 1261 to a partition!
[ 33.144824] mdadm: sending ioctl 1261 to a partition!
[ 33.144830] mdadm: sending ioctl 1261 to a partition!
[ 33.214172] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 33.214269] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 33.609309] [drm] radeon kernel modesetting enabled.
[ 33.609437] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 33.609444] radeon 0000:01:05.0: setting latency timer to 64
[ 33.609650] [drm] initializing kernel modesetting (RS780 0x1002:0x9610 0x1849:0x9610).
[ 33.609678] [drm] register mmio base: 0xFDFF0000
[ 33.609680] [drm] register mmio size: 65536
[ 33.615088] ATOM BIOS: ASROCK
[ 33.615116] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
[ 33.615120] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 33.615512] [drm] Detected VRAM RAM=256M, BAR=256M
[ 33.615517] [drm] RAM width 32bits DDR
[ 33.615639] [TTM] Zone kernel: Available graphics memory: 434062 kiB.
[ 33.615643] [TTM] Zone highmem: Available graphics memory: 1943794 kiB.
[ 33.615645] [TTM] Initializing pool allocator.
[ 33.615681] [drm] radeon: 256M of VRAM memory ready
[ 33.615684] [drm] radeon: 512M of GTT memory ready.
[ 33.615705] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 33.615707] [drm] Driver supports precise vblank timestamp query.
[ 33.615726] [drm] radeon: irq initialized.
[ 33.615732] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 33.618453] [drm] Loading RS780 Microcode
[ 33.822562] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 33.868291] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 33.868390] radeon 0000:01:05.0: WB enabled
[ 33.899525] [drm] ring test succeeded in 1 usecs
[ 33.899700] [drm] radeon: ib pool ready.
[ 33.899775] [drm] ib test succeeded in 0 usecs
[ 33.900954] [drm] Radeon Display Connectors
[ 33.900958] [drm] Connector 0:
[ 33.900960] [drm] VGA
[ 33.900962] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 33.900964] [drm] Encoders:
[ 33.900966] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 33.900968] [drm] Connector 1:
[ 33.900969] [drm] DVI-D
[ 33.900970] [drm] HPD3
[ 33.900972] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 33.900974] [drm] Encoders:
[ 33.900976] [drm] DFP3: INTERNAL_KLDSCP_LVTMA
[ 33.901033] [drm] radeon: power management initialized
[ 33.938064] mdadm: sending ioctl 800c0910 to a partition!
[ 33.938070] mdadm: sending ioctl 800c0910 to a partition!
[ 33.938081] mdadm: sending ioctl 1261 to a partition!
[ 34.002402] [drm] fb mappable at 0xD0142000
[ 34.002406] [drm] vram apper at 0xD0000000
[ 34.002408] [drm] size 5242880
[ 34.002409] [drm] fb depth is 24
[ 34.002411] [drm] pitch is 5120
[ 34.002512] fbcon: radeondrmfb (fb0) is primary device
[ 34.045051] Console: switching to colour frame buffer device 160x64
[ 34.061976] fb0: radeondrmfb frame buffer device
[ 34.061978] drm: registered panic notifier
[ 34.061985] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:05.0 on minor 0
[ 34.619595] EXT3-fs (dm-1): using internal journal
[ 35.384933] loop: module loaded
[ 35.433130] powernow-k8: Found 1 AMD Athlon(tm) Dual Core Processor 4850e (2 cpu cores) (version 2.20.00)
[ 35.433189] powernow-k8: fid 0x11 (2500 MHz), vid 0xe
[ 35.433191] powernow-k8: fid 0x10 (2400 MHz), vid 0xf
[ 35.433193] powernow-k8: fid 0xe (2200 MHz), vid 0x11
[ 35.433195] powernow-k8: fid 0xc (2000 MHz), vid 0x13
[ 35.433197] powernow-k8: fid 0xa (1800 MHz), vid 0x15
[ 35.433199] powernow-k8: fid 0x2 (1000 MHz), vid 0x16
[ 35.460371] w83627ehf: Found W83627EHG chip at 0x290
[ 35.603053] kvm: Nested Virtualization enabled
[ 35.780586] scsi_verify_blk_ioctl: 33 callbacks suppressed
[ 35.780596] mdadm: sending ioctl 800c0910 to a partition!
[ 35.780608] mdadm: sending ioctl 1261 to a partition!
[ 35.790411] mdadm: sending ioctl 1261 to a partition!
[ 35.790875] mdadm: sending ioctl 1261 to a partition!
[ 35.817107] mdadm: sending ioctl 1261 to a partition!
[ 35.818008] mdadm: sending ioctl 1261 to a partition!
[ 35.818241] mdadm: sending ioctl 1261 to a partition!
[ 35.911030] mdadm: sending ioctl 800c0910 to a partition!
[ 35.911040] mdadm: sending ioctl 1261 to a partition!
[ 35.921199] mdadm: sending ioctl 1261 to a partition!
[ 37.626858] Adding 4194300k swap on /dev/mapper/speicher-swap. Priority:-1 extents:1 across:4194300k
[ 39.817055] kjournald starting. Commit interval 5 seconds
[ 39.849102] EXT3-fs (md0): using internal journal
[ 39.849114] EXT3-fs (md0): mounted filesystem with ordered data mode
[ 39.955959] kjournald starting. Commit interval 5 seconds
[ 40.031613] EXT3-fs (dm-6): using internal journal
[ 40.031628] EXT3-fs (dm-6): mounted filesystem with ordered data mode
[ 40.328302] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 40.329236] SGI XFS Quota Management subsystem
[ 40.386736] XFS (dm-7): Mounting Filesystem
[ 40.639142] XFS (dm-7): Ending clean mount
[ 40.660972] XFS (dm-8): Mounting Filesystem
[ 40.904494] XFS (dm-8): Ending clean mount
[ 41.026725] REISERFS (device dm-5): found reiserfs format "3.6" with standard journal
[ 41.026744] REISERFS (device dm-5): using ordered data mode
[ 41.026748] reiserfs: using flush barriers
[ 41.036450] REISERFS (device dm-5): journal params: device dm-5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 41.037955] REISERFS (device dm-5): checking transaction log (dm-5)
[ 41.078611] REISERFS (device dm-5): Using r5 hash to sort names
[ 41.130697] kjournald starting. Commit interval 5 seconds
[ 41.131191] EXT3-fs (dm-3): using internal journal
[ 41.131205] EXT3-fs (dm-3): mounted filesystem with ordered data mode
[ 41.163368] kjournald starting. Commit interval 5 seconds
[ 41.163855] EXT3-fs (dm-4): using internal journal
[ 41.163863] EXT3-fs (dm-4): mounted filesystem with ordered data mode
[ 66.833515] postgres (1935): /proc/1935/oom_adj is deprecated, please use /proc/1935/oom_score_adj instead.
[ 82.556056] r8169 0000:04:00.0: eth3: link down
[ 82.556075] r8169 0000:04:00.0: eth3: link down
[ 82.556558] ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 84.641858] r8169 0000:04:00.0: eth3: link up
[ 84.642218] ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
[ 86.680226] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 87.221851] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 95.792032] eth3: no IPv6 routers present
[ 1892.793210] ata1: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x7
[ 1892.793218] ata1: SError: { HostInt }
[ 1892.793226] ata1: hard resetting link
[ 1893.284037] ata1: softreset failed (device not ready)
[ 1893.284045] ata1: applying PMP SRST workaround and retrying
[ 1893.456064] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1893.468090] ata1.00: configured for UDMA/100
[ 1893.484043] ata1: EH complete
[ 1895.488146] PM: Syncing filesystems ... done.
[ 1896.653805] PM: Preparing system for mem sleep
[ 1896.752411] Freezing user space processes ... (elapsed 0.04 seconds) done.
[ 1896.800029] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 1896.816037] PM: Entering mem sleep
[ 1896.816072] Suspending console(s) (use no_console_suspend to debug)
[ 1896.816617] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1896.817022] sd 0:0:0:0: [sda] Stopping disk
[ 1896.817314] r8169 0000:04:00.0: eth3: link down
[ 1896.820481] pata_atiixp 0000:00:14.1: PCI INT A disabled
[ 1896.832087] ohci_hcd 0000:00:12.0: PCI INT A disabled
[ 1896.860034] ehci_hcd 0000:00:13.2: PCI INT B disabled
[ 1896.884027] ehci_hcd 0000:00:12.2: PCI INT B disabled
[ 1896.888060] ohci_hcd 0000:00:12.1: PCI INT A disabled
[ 1896.896086] ohci_hcd 0000:00:14.5: PCI INT C disabled
[ 1896.896105] ohci_hcd 0000:00:13.1: PCI INT A disabled
[ 1896.896122] ohci_hcd 0000:00:13.0: PCI INT A disabled
[ 1896.947190] radeon 0000:01:05.0: PCI INT A disabled
[ 1897.128079] snd_hda_intel 0000:00:14.2: PCI INT A disabled
[ 1897.253983] ahci 0000:00:11.0: PCI INT A disabled
[ 1897.268055] PM: suspend of devices complete after 451.731 msecs
[ 1897.268264] r8169 0000:04:00.0: PME# enabled
[ 1897.268275] pcieport 0000:00:0a.0: wake-up capability enabled by ACPI
[ 1897.284138] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
[ 1897.284240] ehci_hcd 0000:00:13.2: PME# enabled
[ 1897.284245] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
[ 1897.300041] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
[ 1897.300069] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
[ 1897.300102] ehci_hcd 0000:00:12.2: PME# enabled
[ 1897.300106] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
[ 1897.316041] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
[ 1897.316068] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
[ 1897.316126] PM: late suspend of devices complete after 48.066 msecs
[ 1897.316265] ACPI: Preparing to enter system sleep state S3
[ 1897.716282] PM: Saving platform NVS memory
[ 1897.716732] Disabling non-boot CPUs ...
[ 1897.820023] CPU 1 is now offline
[ 1897.820581] ACPI: Low-level resume complete
[ 1897.820581] PM: Restoring platform NVS memory
[ 1897.820581] Enabling non-boot CPUs ...
[ 1897.820581] Booting Node 0 Processor 1 APIC 0x1
[ 1897.820581] smpboot cpu 1: start_ip = 9b000
[ 1897.718074] Initializing CPU#1
[ 1897.718074] Calibrating delay loop (skipped) already calibrated this CPU
[ 1897.832387] NMI watchdog enabled, takes one hw-pmu counter.
[ 1897.832618] CPU1 is up
[ 1897.833230] ACPI: Waking up from system sleep state S3
[ 1897.833743] pcieport 0000:00:09.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 1897.833774] pcieport 0000:00:0a.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 1897.833799] ahci 0000:00:11.0: restoring config space at offset 0xf (was 0x100, writing 0x104)
[ 1897.833856] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
[ 1897.833884] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
[ 1897.848034] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xfddff000-0xfddff0ff] (PCI address [0xfddff000-0xfddff0ff])
[ 1897.848065] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00112)
[ 1897.848079] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
[ 1897.848085] ehci_hcd 0000:00:12.2: PME# disabled
[ 1897.848112] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
[ 1897.848139] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
[ 1897.864028] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xfddf6800-0xfddf68ff] (PCI address [0xfddf6800-0xfddf68ff])
[ 1897.864058] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00113)
[ 1897.864072] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
[ 1897.864077] ehci_hcd 0000:00:13.2: PME# disabled
[ 1897.864131] pata_atiixp 0000:00:14.1: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
[ 1897.864169] snd_hda_intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002)
[ 1897.864250] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
[ 1897.864278] radeon 0000:01:05.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
[ 1897.864288] radeon 0000:01:05.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[ 1897.864292] radeon 0000:01:05.0: restoring config space at offset 0x1 (was 0x40100107, writing 0x100107)
[ 1897.864318] r8169 0000:04:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfebf0000)
[ 1897.864326] r8169 0000:04:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xfcfe000c)
[ 1897.864332] r8169 0000:04:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xfcfff00c)
[ 1897.864341] r8169 0000:04:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 1897.864506] PM: early resume of devices complete after 30.841 msecs
[ 1897.864599] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1897.864691] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1897.864715] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1897.864817] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1897.864839] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1897.864852] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1897.864888] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1897.864923] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1897.864941] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1897.864973] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1897.864996] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1897.864999] radeon 0000:01:05.0: setting latency timer to 64
[ 1897.865459] pcieport 0000:00:0a.0: wake-up capability disabled by ACPI
[ 1897.865465] r8169 0000:04:00.0: PME# disabled
[ 1897.869214] sd 0:0:0:0: [sda] Starting disk
[ 1897.884157] r8169 0000:04:00.0: eth3: link down
[ 1897.894642] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 1897.894839] radeon 0000:01:05.0: WB enabled
[ 1897.925766] [drm] ring test succeeded in 1 usecs
[ 1897.925779] [drm] ib test succeeded in 0 usecs
[ 1898.036501] ata8.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
[ 1898.036505] ata8.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out
[ 1898.036508] ata8.01: ACPI cmd f5/00:00:00:00:00:b0 (SECURITY FREEZE LOCK) filtered out
[ 1898.044508] ata8.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 1898.044512] ata8.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[ 1898.044516] ata8.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1898.052440] ata8.00: configured for UDMA/33
[ 1898.068439] ata8.01: configured for UDMA/33
[ 1898.184045] ata5: SATA link down (SStatus 0 SControl 300)
[ 1898.184078] ata3: SATA link down (SStatus 0 SControl 300)
[ 1898.188042] ata6: SATA link down (SStatus 0 SControl 300)
[ 1898.188082] ata2: SATA link down (SStatus 0 SControl 300)
[ 1898.188112] ata4: SATA link down (SStatus 0 SControl 300)
[ 1899.923379] r8169 0000:04:00.0: eth3: link up
[ 1907.880021] ata1: softreset failed (device not ready)
[ 1911.396019] ata1: softreset failed (device not ready)
[ 1911.396022] ata1: applying PMP SRST workaround and retrying
[ 1911.568043] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1911.580517] ata1.00: configured for UDMA/100
[ 1911.626955] PM: resume of devices complete after 13762.414 msecs
[ 1911.627388] PM: Finishing wakeup.
[ 1911.627390] Restarting tasks ... done.
[ 2720.428422] PM: Syncing filesystems ... done.
[ 2720.850634] PM: Preparing system for mem sleep
[ 2720.864540] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 2720.880060] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 2720.896037] PM: Entering mem sleep
[ 2720.896076] Suspending console(s) (use no_console_suspend to debug)
[ 2720.896600] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2720.896899] sd 0:0:0:0: [sda] Stopping disk
[ 2720.897436] r8169 0000:04:00.0: eth3: link down
[ 2720.908185] pata_atiixp 0000:00:14.1: PCI INT A disabled
[ 2720.912074] ohci_hcd 0000:00:12.0: PCI INT A disabled
[ 2720.940037] ehci_hcd 0000:00:13.2: PCI INT B disabled
[ 2720.964027] ehci_hcd 0000:00:12.2: PCI INT B disabled
[ 2720.968061] ohci_hcd 0000:00:12.1: PCI INT A disabled
[ 2720.976049] ohci_hcd 0000:00:14.5: PCI INT C disabled
[ 2720.976094] ohci_hcd 0000:00:13.0: PCI INT A disabled
[ 2720.976113] ohci_hcd 0000:00:13.1: PCI INT A disabled
[ 2721.033691] radeon 0000:01:05.0: PCI INT A disabled
[ 2721.204101] snd_hda_intel 0000:00:14.2: PCI INT A disabled
[ 2721.334134] ahci 0000:00:11.0: PCI INT A disabled
[ 2721.348053] PM: suspend of devices complete after 451.754 msecs
[ 2721.348276] r8169 0000:04:00.0: PME# enabled
[ 2721.348292] pcieport 0000:00:0a.0: wake-up capability enabled by ACPI
[ 2721.364140] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
[ 2721.364241] ehci_hcd 0000:00:13.2: PME# enabled
[ 2721.364245] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
[ 2721.380042] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
[ 2721.380069] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
[ 2721.380101] ehci_hcd 0000:00:12.2: PME# enabled
[ 2721.380106] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
[ 2721.396042] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
[ 2721.396069] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
[ 2721.396176] PM: late suspend of devices complete after 48.117 msecs
[ 2721.396312] ACPI: Preparing to enter system sleep state S3
[ 2721.796270] PM: Saving platform NVS memory
[ 2721.796679] Disabling non-boot CPUs ...
[ 2721.900016] CPU 1 is now offline
[ 2721.900626] ACPI: Low-level resume complete
[ 2721.900626] PM: Restoring platform NVS memory
[ 2721.900626] Enabling non-boot CPUs ...
[ 2721.900626] Booting Node 0 Processor 1 APIC 0x1
[ 2721.900626] smpboot cpu 1: start_ip = 9b000
[ 2721.798058] Initializing CPU#1
[ 2721.798058] Calibrating delay loop (skipped) already calibrated this CPU
[ 2721.912465] NMI watchdog enabled, takes one hw-pmu counter.
[ 2721.912700] CPU1 is up
[ 2721.913319] ACPI: Waking up from system sleep state S3
[ 2721.913826] pcieport 0000:00:09.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 2721.913857] pcieport 0000:00:0a.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 2721.913882] ahci 0000:00:11.0: restoring config space at offset 0xf (was 0x100, writing 0x104)
[ 2721.913938] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
[ 2721.913966] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
[ 2721.928034] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xfddff000-0xfddff0ff] (PCI address [0xfddff000-0xfddff0ff])
[ 2721.928063] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00112)
[ 2721.928078] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
[ 2721.928083] ehci_hcd 0000:00:12.2: PME# disabled
[ 2721.928110] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
[ 2721.928137] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
[ 2721.944031] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xfddf6800-0xfddf68ff] (PCI address [0xfddf6800-0xfddf68ff])
[ 2721.944061] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00113)
[ 2721.944075] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
[ 2721.944080] ehci_hcd 0000:00:13.2: PME# disabled
[ 2721.944134] pata_atiixp 0000:00:14.1: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
[ 2721.944172] snd_hda_intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002)
[ 2721.944253] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
[ 2721.944281] radeon 0000:01:05.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
[ 2721.944291] radeon 0000:01:05.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[ 2721.944318] r8169 0000:04:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfebf0000)
[ 2721.944326] r8169 0000:04:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xfcfe000c)
[ 2721.944332] r8169 0000:04:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xfcfff00c)
[ 2721.944342] r8169 0000:04:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 2721.944506] PM: early resume of devices complete after 30.758 msecs
[ 2721.944599] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2721.944637] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2721.944700] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2721.944743] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2721.944842] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2721.944864] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2721.944887] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2721.944906] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2721.944924] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2721.944951] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2721.944963] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2721.944966] radeon 0000:01:05.0: setting latency timer to 64
[ 2721.945996] pcieport 0000:00:0a.0: wake-up capability disabled by ACPI
[ 2721.946002] r8169 0000:04:00.0: PME# disabled
[ 2721.949755] sd 0:0:0:0: [sda] Starting disk
[ 2721.964160] r8169 0000:04:00.0: eth3: link down
[ 2721.974414] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 2721.974650] radeon 0000:01:05.0: WB enabled
[ 2722.005577] [drm] ring test succeeded in 1 usecs
[ 2722.005590] [drm] ib test succeeded in 0 usecs
[ 2722.108501] ata8.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
[ 2722.108505] ata8.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out
[ 2722.108508] ata8.01: ACPI cmd f5/00:00:00:00:00:b0 (SECURITY FREEZE LOCK) filtered out
[ 2722.116507] ata8.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 2722.116511] ata8.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[ 2722.116515] ata8.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2722.124441] ata8.00: configured for UDMA/33
[ 2722.140440] ata8.01: configured for UDMA/33
[ 2722.264045] ata2: SATA link down (SStatus 0 SControl 300)
[ 2722.268042] ata5: SATA link down (SStatus 0 SControl 300)
[ 2722.268073] ata6: SATA link down (SStatus 0 SControl 300)
[ 2722.268103] ata4: SATA link down (SStatus 0 SControl 300)
[ 2722.268132] ata3: SATA link down (SStatus 0 SControl 300)
[ 2723.626328] r8169 0000:04:00.0: eth3: link up
[ 2731.956023] ata1: softreset failed (device not ready)
[ 2735.472019] ata1: softreset failed (device not ready)
[ 2735.472022] ata1: applying PMP SRST workaround and retrying
[ 2735.644031] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2735.655657] ata1.00: configured for UDMA/100
[ 2735.697070] PM: resume of devices complete after 13752.529 msecs
[ 2735.697506] PM: Finishing wakeup.
[ 2735.697508] Restarting tasks ... done.
[ 6581.481318] ata1: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x7
[ 6581.481333] ata1: SError: { HostInt }
[ 6581.481348] ata1: hard resetting link
[ 6581.972034] ata1: softreset failed (device not ready)
[ 6581.972040] ata1: applying PMP SRST workaround and retrying
[ 6582.144037] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6582.156249] ata1.00: configured for UDMA/100
[ 6582.172019] ata1: EH complete
[ 6584.408144] PM: Syncing filesystems ... done.
[ 6584.753594] PM: Preparing system for mem sleep
[ 6584.772392] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 6584.788076] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 6584.804036] PM: Entering mem sleep
[ 6584.804076] Suspending console(s) (use no_console_suspend to debug)
[ 6584.804591] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 6584.804907] sd 0:0:0:0: [sda] Stopping disk
[ 6584.812457] pata_atiixp 0000:00:14.1: PCI INT A disabled
[ 6584.820075] ohci_hcd 0000:00:12.0: PCI INT A disabled
[ 6584.848048] ehci_hcd 0000:00:13.2: PCI INT B disabled
[ 6584.872032] ehci_hcd 0000:00:12.2: PCI INT B disabled
[ 6584.876064] ohci_hcd 0000:00:12.1: PCI INT A disabled
[ 6584.884070] ohci_hcd 0000:00:14.5: PCI INT C disabled
[ 6584.884099] ohci_hcd 0000:00:13.0: PCI INT A disabled
[ 6584.884118] ohci_hcd 0000:00:13.1: PCI INT A disabled
[ 6584.960204] radeon 0000:01:05.0: PCI INT A disabled
[ 6585.120097] snd_hda_intel 0000:00:14.2: PCI INT A disabled
[ 6585.243513] ahci 0000:00:11.0: PCI INT A disabled
[ 6585.256050] PM: suspend of devices complete after 451.747 msecs
[ 6585.256258] r8169 0000:04:00.0: PME# enabled
[ 6585.256272] pcieport 0000:00:0a.0: wake-up capability enabled by ACPI
[ 6585.272140] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
[ 6585.272242] ehci_hcd 0000:00:13.2: PME# enabled
[ 6585.272246] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
[ 6585.288056] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
[ 6585.288084] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
[ 6585.288117] ehci_hcd 0000:00:12.2: PME# enabled
[ 6585.288121] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
[ 6585.304043] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
[ 6585.304070] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
[ 6585.304166] PM: late suspend of devices complete after 48.111 msecs
[ 6585.304273] ACPI: Preparing to enter system sleep state S3
[ 6585.704283] PM: Saving platform NVS memory
[ 6585.704699] Disabling non-boot CPUs ...
[ 6585.808018] CPU 1 is now offline
[ 6585.808639] ACPI: Low-level resume complete
[ 6585.808639] PM: Restoring platform NVS memory
[ 6585.808639] Enabling non-boot CPUs ...
[ 6585.808639] Booting Node 0 Processor 1 APIC 0x1
[ 6585.808639] smpboot cpu 1: start_ip = 9b000
[ 6585.706080] Initializing CPU#1
[ 6585.706080] Calibrating delay loop (skipped) already calibrated this CPU
[ 6585.820480] NMI watchdog enabled, takes one hw-pmu counter.
[ 6585.820714] CPU1 is up
[ 6585.821349] ACPI: Waking up from system sleep state S3
[ 6585.821830] pcieport 0000:00:09.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 6585.821861] pcieport 0000:00:0a.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 6585.821886] ahci 0000:00:11.0: restoring config space at offset 0xf (was 0x100, writing 0x104)
[ 6585.821943] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
[ 6585.821971] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
[ 6585.836034] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xfddff000-0xfddff0ff] (PCI address [0xfddff000-0xfddff0ff])
[ 6585.836064] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00112)
[ 6585.836078] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
[ 6585.836083] ehci_hcd 0000:00:12.2: PME# disabled
[ 6585.836111] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
[ 6585.836138] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
[ 6585.852033] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xfddf6800-0xfddf68ff] (PCI address [0xfddf6800-0xfddf68ff])
[ 6585.852062] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00113)
[ 6585.852076] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
[ 6585.852081] ehci_hcd 0000:00:13.2: PME# disabled
[ 6585.852135] pata_atiixp 0000:00:14.1: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
[ 6585.852173] snd_hda_intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002)
[ 6585.852254] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
[ 6585.852282] radeon 0000:01:05.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
[ 6585.852292] radeon 0000:01:05.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[ 6585.852320] r8169 0000:04:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfebf0000)
[ 6585.852328] r8169 0000:04:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xfcfe000c)
[ 6585.852334] r8169 0000:04:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xfcfff00c)
[ 6585.852343] r8169 0000:04:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 6585.852509] PM: early resume of devices complete after 30.756 msecs
[ 6585.852602] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6585.852642] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6585.852704] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6585.852750] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 6585.852848] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 6585.852871] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 6585.852895] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 6585.852905] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6585.852924] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6585.852935] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6585.853041] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 6585.853045] radeon 0000:01:05.0: setting latency timer to 64
[ 6585.853412] sd 0:0:0:0: [sda] Starting disk
[ 6585.856044] pcieport 0000:00:0a.0: wake-up capability disabled by ACPI
[ 6585.856050] r8169 0000:04:00.0: PME# disabled
[ 6585.882090] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 6585.882483] radeon 0000:01:05.0: WB enabled
[ 6585.913421] [drm] ring test succeeded in 1 usecs
[ 6585.913438] [drm] ib test succeeded in 0 usecs
[ 6586.024507] ata8.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
[ 6586.024511] ata8.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out
[ 6586.024515] ata8.01: ACPI cmd f5/00:00:00:00:00:b0 (SECURITY FREEZE LOCK) filtered out
[ 6586.032500] ata8.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 6586.032504] ata8.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[ 6586.032507] ata8.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 6586.040434] ata8.00: configured for UDMA/33
[ 6586.056451] ata8.01: configured for UDMA/33
[ 6586.172048] ata2: SATA link down (SStatus 0 SControl 300)
[ 6586.172081] ata6: SATA link down (SStatus 0 SControl 300)
[ 6586.172110] ata4: SATA link down (SStatus 0 SControl 300)
[ 6586.172140] ata5: SATA link down (SStatus 0 SControl 300)
[ 6586.172168] ata3: SATA link down (SStatus 0 SControl 300)
[ 6595.864020] ata1: softreset failed (device not ready)
[ 6599.268018] ata1: softreset failed (device not ready)
[ 6599.268022] ata1: applying PMP SRST workaround and retrying
[ 6599.440029] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6599.452026] ata1.00: configured for UDMA/100
[ 6599.500642] PM: resume of devices complete after 13648.099 msecs
[ 6599.501074] PM: Finishing wakeup.
[ 6599.501075] Restarting tasks ... done.
[ 6600.589989] r8169 0000:04:00.0: eth3: link down
[ 6600.590007] r8169 0000:04:00.0: eth3: link down
[ 6600.590720] ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 6602.235285] r8169 0000:04:00.0: eth3: link up
[ 6602.235636] ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
[ 6612.544035] eth3: no IPv6 routers present
[ 6634.812653] fuse init (API version 7.17)
[ 8333.340485] ata1: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x7
[ 8333.340498] ata1: SError: { HostInt }
[ 8333.340512] ata1: hard resetting link
[ 8333.832037] ata1: softreset failed (device not ready)
[ 8333.832043] ata1: applying PMP SRST workaround and retrying
[ 8334.004061] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8334.015186] ata1.00: configured for UDMA/100
[ 8334.028051] ata1: EH complete
[ 8336.129136] PM: Syncing filesystems ... done.
[ 8336.469618] PM: Preparing system for mem sleep
[ 8336.491946] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 8336.508102] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 8336.524042] PM: Entering mem sleep
[ 8336.524082] Suspending console(s) (use no_console_suspend to debug)
[ 8336.524640] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 8336.524993] sd 0:0:0:0: [sda] Stopping disk
[ 8336.526761] pata_atiixp 0000:00:14.1: PCI INT A disabled
[ 8336.540072] ohci_hcd 0000:00:12.0: PCI INT A disabled
[ 8336.568031] ehci_hcd 0000:00:13.2: PCI INT B disabled
[ 8336.592026] ehci_hcd 0000:00:12.2: PCI INT B disabled
[ 8336.596062] ohci_hcd 0000:00:12.1: PCI INT A disabled
[ 8336.604089] ohci_hcd 0000:00:13.0: PCI INT A disabled
[ 8336.604108] ohci_hcd 0000:00:13.1: PCI INT A disabled
[ 8336.604127] ohci_hcd 0000:00:14.5: PCI INT C disabled
[ 8336.658148] radeon 0000:01:05.0: PCI INT A disabled
[ 8336.832108] snd_hda_intel 0000:00:14.2: PCI INT A disabled
[ 8336.962416] ahci 0000:00:11.0: PCI INT A disabled
[ 8336.976055] PM: suspend of devices complete after 451.719 msecs
[ 8336.976271] r8169 0000:04:00.0: PME# enabled
[ 8336.976282] pcieport 0000:00:0a.0: wake-up capability enabled by ACPI
[ 8336.992146] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
[ 8336.992247] ehci_hcd 0000:00:13.2: PME# enabled
[ 8336.992251] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
[ 8337.008043] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
[ 8337.008070] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
[ 8337.008103] ehci_hcd 0000:00:12.2: PME# enabled
[ 8337.008107] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
[ 8337.024043] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
[ 8337.024069] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
[ 8337.024166] PM: late suspend of devices complete after 48.106 msecs
[ 8337.024298] ACPI: Preparing to enter system sleep state S3
[ 8337.424272] PM: Saving platform NVS memory
[ 8337.424699] Disabling non-boot CPUs ...
[ 8337.528016] CPU 1 is now offline
[ 8337.528613] ACPI: Low-level resume complete
[ 8337.528613] PM: Restoring platform NVS memory
[ 8337.528613] Enabling non-boot CPUs ...
[ 8337.528613] Booting Node 0 Processor 1 APIC 0x1
[ 8337.528613] smpboot cpu 1: start_ip = 9b000
[ 8337.426072] Initializing CPU#1
[ 8337.426072] Calibrating delay loop (skipped) already calibrated this CPU
[ 8337.540399] NMI watchdog enabled, takes one hw-pmu counter.
[ 8337.540645] CPU1 is up
[ 8337.541256] ACPI: Waking up from system sleep state S3
[ 8337.541741] pcieport 0000:00:09.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 8337.541772] pcieport 0000:00:0a.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 8337.541797] ahci 0000:00:11.0: restoring config space at offset 0xf (was 0x100, writing 0x104)
[ 8337.541854] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
[ 8337.541882] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
[ 8337.556034] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xfddff000-0xfddff0ff] (PCI address [0xfddff000-0xfddff0ff])
[ 8337.556063] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00112)
[ 8337.556078] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
[ 8337.556083] ehci_hcd 0000:00:12.2: PME# disabled
[ 8337.556110] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
[ 8337.556138] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
[ 8337.572028] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xfddf6800-0xfddf68ff] (PCI address [0xfddf6800-0xfddf68ff])
[ 8337.572057] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00113)
[ 8337.572072] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
[ 8337.572077] ehci_hcd 0000:00:13.2: PME# disabled
[ 8337.572131] pata_atiixp 0000:00:14.1: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
[ 8337.572169] snd_hda_intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002)
[ 8337.572250] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
[ 8337.572278] radeon 0000:01:05.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
[ 8337.572289] radeon 0000:01:05.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[ 8337.572315] r8169 0000:04:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfebf0000)
[ 8337.572324] r8169 0000:04:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xfcfe000c)
[ 8337.572330] r8169 0000:04:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xfcfff00c)
[ 8337.572339] r8169 0000:04:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 8337.572505] PM: early resume of devices complete after 30.843 msecs
[ 8337.572598] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 8337.572643] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8337.572696] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8337.572750] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 8337.572850] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8337.572872] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8337.572896] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8337.572906] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8337.572924] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8337.572937] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 8337.572963] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8337.572966] radeon 0000:01:05.0: setting latency timer to 64
[ 8337.572971] pcieport 0000:00:0a.0: wake-up capability disabled by ACPI
[ 8337.572977] r8169 0000:04:00.0: PME# disabled
[ 8337.577375] sd 0:0:0:0: [sda] Starting disk
[ 8337.602329] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 8337.602496] radeon 0000:01:05.0: WB enabled
[ 8337.633423] [drm] ring test succeeded in 1 usecs
[ 8337.633436] [drm] ib test succeeded in 0 usecs
[ 8337.740507] ata8.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
[ 8337.740511] ata8.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out
[ 8337.740515] ata8.01: ACPI cmd f5/00:00:00:00:00:b0 (SECURITY FREEZE LOCK) filtered out
[ 8337.748498] ata8.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 8337.748502] ata8.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[ 8337.748506] ata8.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 8337.756435] ata8.00: configured for UDMA/33
[ 8337.772445] ata8.01: configured for UDMA/33
[ 8337.892046] ata2: SATA link down (SStatus 0 SControl 300)
[ 8337.896042] ata5: SATA link down (SStatus 0 SControl 300)
[ 8337.896072] ata6: SATA link down (SStatus 0 SControl 300)
[ 8337.896102] ata3: SATA link down (SStatus 0 SControl 300)
[ 8337.896132] ata4: SATA link down (SStatus 0 SControl 300)
[ 8347.584019] ata1: softreset failed (device not ready)
[ 8351.044017] ata1: softreset failed (device not ready)
[ 8351.044021] ata1: applying PMP SRST workaround and retrying
[ 8351.216028] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8351.227823] ata1.00: configured for UDMA/100
[ 8351.266188] PM: resume of devices complete after 13693.649 msecs
[ 8351.266569] PM: Finishing wakeup.
[ 8351.266571] Restarting tasks ... done.
[ 8352.629887] r8169 0000:04:00.0: eth3: link down
[ 8352.629908] r8169 0000:04:00.0: eth3: link down
[ 8352.630299] ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 8354.285762] r8169 0000:04:00.0: eth3: link up
[ 8354.286121] ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
[ 8364.992029] eth3: no IPv6 routers present
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20120625.Xorg.0.log
Type: text/x-log
Size: 66995 bytes
Desc: not available
URL: <http://lists.freedesktop.org/archives/dri-devel/attachments/20120625/5f1f9d82/attachment-0001.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part
URL: <http://lists.freedesktop.org/archives/dri-devel/attachments/20120625/5f1f9d82/attachment-0001.pgp>
More information about the dri-devel
mailing list