[PATCH 38/47] gma500: oaktrail_hdmi: drop dead code
Alan Cox
alan at lxorguk.ukuu.org.uk
Thu Mar 8 08:12:28 PST 2012
From: Kirill A. Shutemov <kirill.shutemov at linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov at linux.intel.com>
Signed-off-by: Alan Cox <alan at linux.intel.com>
---
drivers/gpu/drm/gma500/oaktrail_hdmi.c | 327 --------------------------------
1 files changed, 0 insertions(+), 327 deletions(-)
diff --git a/drivers/gpu/drm/gma500/oaktrail_hdmi.c b/drivers/gpu/drm/gma500/oaktrail_hdmi.c
index e4c73c6..f3fc693 100644
--- a/drivers/gpu/drm/gma500/oaktrail_hdmi.c
+++ b/drivers/gpu/drm/gma500/oaktrail_hdmi.c
@@ -125,59 +125,6 @@ static const struct oaktrail_hdmi_limit oaktrail_hdmi_limit = {
.nf = { .min = NF_MIN, .max = NF_MAX },
};
-static void wait_for_vblank(struct drm_device *dev)
-{
- /* FIXME: Can we do this as a sleep ? */
- /* Wait for 20ms, i.e. one cycle at 50hz. */
- mdelay(20);
-}
-
-static void scu_busy_loop(void *scu_base)
-{
- u32 status = 0;
- u32 loop_count = 0;
-
- status = readl(scu_base + 0x04);
- while (status & 1) {
- udelay(1); /* scu processing time is in few u secods */
- status = readl(scu_base + 0x04);
- loop_count++;
- /* break if scu doesn't reset busy bit after huge retry */
- if (loop_count > 1000) {
- DRM_DEBUG_KMS("SCU IPC timed out");
- return;
- }
- }
-}
-
-static void oaktrail_hdmi_reset(struct drm_device *dev)
-{
- void *base;
- /* FIXME: at least make these defines */
- unsigned int scu_ipc_mmio = 0xff11c000;
- int scu_len = 1024;
-
- base = ioremap((resource_size_t)scu_ipc_mmio, scu_len);
- if (base == NULL) {
- DRM_ERROR("failed to map SCU mmio\n");
- return;
- }
-
- /* scu ipc: assert hdmi controller reset */
- writel(0xff11d118, base + 0x0c);
- writel(0x7fffffdf, base + 0x80);
- writel(0x42005, base + 0x0);
- scu_busy_loop(base);
-
- /* scu ipc: de-assert hdmi controller reset */
- writel(0xff11d118, base + 0x0c);
- writel(0x7fffffff, base + 0x80);
- writel(0x42005, base + 0x0);
- scu_busy_loop(base);
-
- iounmap(base);
-}
-
static void oaktrail_hdmi_audio_enable(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
@@ -208,104 +155,6 @@ static void oaktrail_hdmi_audio_disable(struct drm_device *dev)
HDMI_READ(HDMI_HCR);
}
-void oaktrail_crtc_hdmi_dpms(struct drm_crtc *crtc, int mode)
-{
- struct drm_device *dev = crtc->dev;
- u32 temp;
-
- switch (mode) {
- case DRM_MODE_DPMS_OFF:
- /* Disable VGACNTRL */
- REG_WRITE(VGACNTRL, 0x80000000);
-
- /* Disable plane */
- temp = REG_READ(DSPBCNTR);
- if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
- REG_WRITE(DSPBCNTR, temp & ~DISPLAY_PLANE_ENABLE);
- REG_READ(DSPBCNTR);
- /* Flush the plane changes */
- REG_WRITE(DSPBSURF, REG_READ(DSPBSURF));
- REG_READ(DSPBSURF);
- }
-
- /* Disable pipe B */
- temp = REG_READ(PIPEBCONF);
- if ((temp & PIPEACONF_ENABLE) != 0) {
- REG_WRITE(PIPEBCONF, temp & ~PIPEACONF_ENABLE);
- REG_READ(PIPEBCONF);
- }
-
- /* Disable LNW Pipes, etc */
- temp = REG_READ(PCH_PIPEBCONF);
- if ((temp & PIPEACONF_ENABLE) != 0) {
- REG_WRITE(PCH_PIPEBCONF, temp & ~PIPEACONF_ENABLE);
- REG_READ(PCH_PIPEBCONF);
- }
- /* wait for pipe off */
- udelay(150);
- /* Disable dpll */
- temp = REG_READ(DPLL_CTRL);
- if ((temp & DPLL_PWRDN) == 0) {
- REG_WRITE(DPLL_CTRL, temp | (DPLL_PWRDN | DPLL_RESET));
- REG_WRITE(DPLL_STATUS, 0x1);
- }
- /* wait for dpll off */
- udelay(150);
- break;
- case DRM_MODE_DPMS_ON:
- case DRM_MODE_DPMS_STANDBY:
- case DRM_MODE_DPMS_SUSPEND:
- /* Enable dpll */
- temp = REG_READ(DPLL_CTRL);
- if ((temp & DPLL_PWRDN) != 0) {
- REG_WRITE(DPLL_CTRL, temp & ~(DPLL_PWRDN | DPLL_RESET));
- temp = REG_READ(DPLL_CLK_ENABLE);
- REG_WRITE(DPLL_CLK_ENABLE, temp | DPLL_EN_DISP | DPLL_SEL_HDMI | DPLL_EN_HDMI);
- REG_READ(DPLL_CLK_ENABLE);
- }
- /* wait for dpll warm up */
- udelay(150);
-
- /* Enable pipe B */
- temp = REG_READ(PIPEBCONF);
- if ((temp & PIPEACONF_ENABLE) == 0) {
- REG_WRITE(PIPEBCONF, temp | PIPEACONF_ENABLE);
- REG_READ(PIPEBCONF);
- }
-
- /* Enable LNW Pipe B */
- temp = REG_READ(PCH_PIPEBCONF);
- if ((temp & PIPEACONF_ENABLE) == 0) {
- REG_WRITE(PCH_PIPEBCONF, temp | PIPEACONF_ENABLE);
- REG_READ(PCH_PIPEBCONF);
- }
- wait_for_vblank(dev);
-
- /* Enable plane */
- temp = REG_READ(DSPBCNTR);
- if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
- REG_WRITE(DSPBCNTR, temp | DISPLAY_PLANE_ENABLE);
- /* Flush the plane changes */
- REG_WRITE(DSPBSURF, REG_READ(DSPBSURF));
- REG_READ(DSPBSURF);
- }
- psb_intel_crtc_load_lut(crtc);
- }
- /* DSPARB */
- REG_WRITE(DSPARB, 0x00003fbf);
- /* FW1 */
- REG_WRITE(0x70034, 0x3f880a0a);
- /* FW2 */
- REG_WRITE(0x70038, 0x0b060808);
- /* FW4 */
- REG_WRITE(0x70050, 0x08030404);
- /* FW5 */
- REG_WRITE(0x70054, 0x04040404);
- /* LNC Chicken Bits */
- REG_WRITE(0x70400, 0x4000);
-}
-
-
static void oaktrail_hdmi_dpms(struct drm_encoder *encoder, int mode)
{
static int dpms_mode = -1;
@@ -327,182 +176,6 @@ static void oaktrail_hdmi_dpms(struct drm_encoder *encoder, int mode)
HDMI_WRITE(HDMI_VIDEO_REG, temp);
}
-static unsigned int htotal_calculate(struct drm_display_mode *mode)
-{
- u32 htotal, new_crtc_htotal;
-
- htotal = (mode->crtc_hdisplay - 1) | ((mode->crtc_htotal - 1) << 16);
-
- /*
- * 1024 x 768 new_crtc_htotal = 0x1024;
- * 1280 x 1024 new_crtc_htotal = 0x0c34;
- */
- new_crtc_htotal = (mode->crtc_htotal - 1) * 200 * 1000 / mode->clock;
-
- return (mode->crtc_hdisplay - 1) | (new_crtc_htotal << 16);
-}
-
-static void oaktrail_hdmi_find_dpll(struct drm_crtc *crtc, int target,
- int refclk, struct oaktrail_hdmi_clock *best_clock)
-{
- int np_min, np_max, nr_min, nr_max;
- int np, nr, nf;
-
- np_min = DIV_ROUND_UP(oaktrail_hdmi_limit.vco.min, target * 10);
- np_max = oaktrail_hdmi_limit.vco.max / (target * 10);
- if (np_min < oaktrail_hdmi_limit.np.min)
- np_min = oaktrail_hdmi_limit.np.min;
- if (np_max > oaktrail_hdmi_limit.np.max)
- np_max = oaktrail_hdmi_limit.np.max;
-
- nr_min = DIV_ROUND_UP((refclk * 1000), (target * 10 * np_max));
- nr_max = DIV_ROUND_UP((refclk * 1000), (target * 10 * np_min));
- if (nr_min < oaktrail_hdmi_limit.nr.min)
- nr_min = oaktrail_hdmi_limit.nr.min;
- if (nr_max > oaktrail_hdmi_limit.nr.max)
- nr_max = oaktrail_hdmi_limit.nr.max;
-
- np = DIV_ROUND_UP((refclk * 1000), (target * 10 * nr_max));
- nr = DIV_ROUND_UP((refclk * 1000), (target * 10 * np));
- nf = DIV_ROUND_CLOSEST((target * 10 * np * nr), refclk);
- DRM_DEBUG_KMS("np, nr, nf %d %d %d\n", np, nr, nf);
-
- /*
- * 1024 x 768 np = 1; nr = 0x26; nf = 0x0fd8000;
- * 1280 x 1024 np = 1; nr = 0x17; nf = 0x1034000;
- */
- best_clock->np = np;
- best_clock->nr = nr - 1;
- best_clock->nf = (nf << 14);
-}
-
-int oaktrail_crtc_hdmi_mode_set(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
- int x, int y,
- struct drm_framebuffer *old_fb)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct oaktrail_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv;
- int pipe = 1;
- int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
- int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
- int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
- int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
- int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
- int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
- int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE;
- int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS;
- int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
- int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
- int refclk;
- struct oaktrail_hdmi_clock clock;
- u32 dspcntr, pipeconf, dpll, temp;
- int dspcntr_reg = DSPBCNTR;
-
- /* Disable the VGA plane that we never use */
- REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
-
- /* XXX: Disable the panel fitter if it was on our pipe */
-
- /* Disable dpll if necessary */
- dpll = REG_READ(DPLL_CTRL);
- if ((dpll & DPLL_PWRDN) == 0) {
- REG_WRITE(DPLL_CTRL, dpll | (DPLL_PWRDN | DPLL_RESET));
- REG_WRITE(DPLL_DIV_CTRL, 0x00000000);
- REG_WRITE(DPLL_STATUS, 0x1);
- }
- udelay(150);
-
- /* reset controller: FIXME - can we sort out the ioremap mess ? */
- iounmap(hdmi_dev->regs);
- oaktrail_hdmi_reset(dev);
-
- /* program and enable dpll */
- refclk = 25000;
- oaktrail_hdmi_find_dpll(crtc, adjusted_mode->clock, refclk, &clock);
-
- /* Setting DPLL */
- dpll = REG_READ(DPLL_CTRL);
- dpll &= ~DPLL_PDIV_MASK;
- dpll &= ~(DPLL_PWRDN | DPLL_RESET);
- REG_WRITE(DPLL_CTRL, 0x00000008);
- REG_WRITE(DPLL_DIV_CTRL, ((clock.nf << 6) | clock.nr));
- REG_WRITE(DPLL_ADJUST, ((clock.nf >> 14) - 1));
- REG_WRITE(DPLL_CTRL, (dpll | (clock.np << DPLL_PDIV_SHIFT) | DPLL_ENSTAT | DPLL_DITHEN));
- REG_WRITE(DPLL_UPDATE, 0x80000000);
- REG_WRITE(DPLL_CLK_ENABLE, 0x80050102);
- udelay(150);
-
- hdmi_dev->regs = ioremap(hdmi_dev->mmio, hdmi_dev->mmio_len);
- if (hdmi_dev->regs == NULL) {
- DRM_ERROR("failed to do hdmi mmio mapping\n");
- return -ENOMEM;
- }
-
- /* configure HDMI */
- HDMI_WRITE(0x1004, 0x1fd);
- HDMI_WRITE(0x2000, 0x1);
- HDMI_WRITE(0x2008, 0x0);
- HDMI_WRITE(0x3130, 0x8);
- HDMI_WRITE(0x101c, 0x1800810);
-
- temp = htotal_calculate(adjusted_mode);
- REG_WRITE(htot_reg, temp);
- REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) | ((adjusted_mode->crtc_hblank_end - 1) << 16));
- REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) | ((adjusted_mode->crtc_hsync_end - 1) << 16));
- REG_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) | ((adjusted_mode->crtc_vtotal - 1) << 16));
- REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) | ((adjusted_mode->crtc_vblank_end - 1) << 16));
- REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16));
- REG_WRITE(pipesrc_reg,
- ((mode->crtc_hdisplay - 1) << 16) | (mode->crtc_vdisplay - 1));
-
- REG_WRITE(PCH_HTOTAL_B, (adjusted_mode->crtc_hdisplay - 1) | ((adjusted_mode->crtc_htotal - 1) << 16));
- REG_WRITE(PCH_HBLANK_B, (adjusted_mode->crtc_hblank_start - 1) | ((adjusted_mode->crtc_hblank_end - 1) << 16));
- REG_WRITE(PCH_HSYNC_B, (adjusted_mode->crtc_hsync_start - 1) | ((adjusted_mode->crtc_hsync_end - 1) << 16));
- REG_WRITE(PCH_VTOTAL_B, (adjusted_mode->crtc_vdisplay - 1) | ((adjusted_mode->crtc_vtotal - 1) << 16));
- REG_WRITE(PCH_VBLANK_B, (adjusted_mode->crtc_vblank_start - 1) | ((adjusted_mode->crtc_vblank_end - 1) << 16));
- REG_WRITE(PCH_VSYNC_B, (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16));
- REG_WRITE(PCH_PIPEBSRC,
- ((mode->crtc_hdisplay - 1) << 16) | (mode->crtc_vdisplay - 1));
-
- temp = adjusted_mode->crtc_hblank_end - adjusted_mode->crtc_hblank_start;
- HDMI_WRITE(HDMI_HBLANK_A, ((adjusted_mode->crtc_hdisplay - 1) << 16) | temp);
-
- REG_WRITE(dspsize_reg,
- ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1));
- REG_WRITE(dsppos_reg, 0);
-
- /* Flush the plane changes */
- {
- struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
- crtc_funcs->mode_set_base(crtc, x, y, old_fb);
- }
-
- /* Set up the display plane register */
- dspcntr = REG_READ(dspcntr_reg);
- dspcntr |= DISPPLANE_GAMMA_ENABLE;
- dspcntr |= DISPPLANE_SEL_PIPE_B;
- dspcntr |= DISPLAY_PLANE_ENABLE;
-
- /* setup pipeconf */
- pipeconf = REG_READ(pipeconf_reg);
- pipeconf |= PIPEACONF_ENABLE;
-
- REG_WRITE(pipeconf_reg, pipeconf);
- REG_READ(pipeconf_reg);
-
- REG_WRITE(PCH_PIPEBCONF, pipeconf);
- REG_READ(PCH_PIPEBCONF);
- wait_for_vblank(dev);
-
- REG_WRITE(dspcntr_reg, dspcntr);
- wait_for_vblank(dev);
-
- return 0;
-}
-
static int oaktrail_hdmi_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
More information about the dri-devel
mailing list