[PATCH 01/10 v2] drm/i915/intel_i2c: cleanup

[Daniel Kurtz]

80 col, spaces around operators and other basic cleanup.

Signed-off-by: Daniel Kurtz <djkurtz at chromium.org>
---
 drivers/gpu/drm/i915/intel_i2c.c |   19 +++++++++++++------
 1 files changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index d30cccc..5e413c4 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -253,11 +253,13 @@ gmbus_xfer(struct i2c_adapter *adapter,
 				   (len << GMBUS_BYTE_COUNT_SHIFT) |
 				   (msgs[i].addr << GMBUS_SLAVE_ADDR_SHIFT) |
 				   GMBUS_SLAVE_READ | GMBUS_SW_RDY);
-			POSTING_READ(GMBUS2+reg_offset);
+			POSTING_READ(GMBUS2 + reg_offset);
 			do {
 				u32 val, loop = 0;
 
-				if (wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_RDY), 50))
+				if (wait_for(I915_READ(GMBUS2 + reg_offset) &
+					     (GMBUS_SATOER | GMBUS_HW_RDY),
+					     50))
 					goto timeout;
 				if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
 					goto clear_err;
@@ -282,10 +284,12 @@ gmbus_xfer(struct i2c_adapter *adapter,
 				   (msgs[i].len << GMBUS_BYTE_COUNT_SHIFT) |
 				   (msgs[i].addr << GMBUS_SLAVE_ADDR_SHIFT) |
 				   GMBUS_SLAVE_WRITE | GMBUS_SW_RDY);
-			POSTING_READ(GMBUS2+reg_offset);
+			POSTING_READ(GMBUS2 + reg_offset);
 
 			while (len) {
-				if (wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_RDY), 50))
+				if (wait_for(I915_READ(GMBUS2 + reg_offset) &
+					     (GMBUS_SATOER | GMBUS_HW_RDY),
+					     50))
 					goto timeout;
 				if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
 					goto clear_err;
@@ -296,11 +300,14 @@ gmbus_xfer(struct i2c_adapter *adapter,
 				} while (--len && ++loop < 4);
 
 				I915_WRITE(GMBUS3 + reg_offset, val);
-				POSTING_READ(GMBUS2+reg_offset);
+				POSTING_READ(GMBUS2 + reg_offset);
 			}
 		}
 
-		if (i + 1 < num && wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_WAIT_PHASE), 50))
+		if (i + 1 < num &&
+		    wait_for(I915_READ(GMBUS2 + reg_offset) &
+			     (GMBUS_SATOER | GMBUS_HW_WAIT_PHASE),
+			     50))
 			goto timeout;
 		if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
 			goto clear_err;
-- 
1.7.7.3