[PATCH v2] drm/i915: Run DDC buses at 50 kbps

[Jean Delvare]

A udelay value of 20 leads to an I2C bus running at only 25 kbps. I2C
devices can typically operate faster than this, 50 kbps should be fine
for all devices (and compliant devices can always stretch the clock if
needed.)

FWIW, the vast majority of framebuffer drivers set udelay to 10
already. So set it to 10 in DRM drivers too, this will make EDID block
reads faster. We might even lower the udelay value later if no problem
is reported.

Signed-off-by: Jean Delvare <jdelvare at suse.de>
Acked-by: Eugeni Dodonov <eugeni.dodonov at intel.com>
Cc: Dave Airlie <airlied at gmail.com>
Cc: Keith Packard <keithp at keithp.com>
---
Changes since v1:
* Split per driver to make merging easier.
* Make the subject line more accurate.

 drivers/gpu/drm/i915/intel_i2c.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- linux-3.4-rc0.orig/drivers/gpu/drm/i915/intel_i2c.c	2012-03-21 13:43:33.750915151 +0100
+++ linux-3.4-rc0/drivers/gpu/drm/i915/intel_i2c.c	2012-03-21 13:44:05.923915628 +0100
@@ -37,7 +37,7 @@
 
 /* Intel GPIO access functions */
 
-#define I2C_RISEFALL_TIME 20
+#define I2C_RISEFALL_TIME 10
 
 static inline struct intel_gmbus *
 to_intel_gmbus(struct i2c_adapter *i2c)

-- 
Jean Delvare
Suse L3