[PATCH 13/13 v4] drm/i915/intel_i2c: reuse GMBUS2 value read in polling loop

[Chris Wilson]

On Wed, 28 Mar 2012 02:36:22 +0800, Daniel Kurtz <djkurtz at chromium.org> wrote:
> Save the GMBUS2 value read while polling for state changes, and then
> reuse this value when determining for which reason the loops were exited.
> This is a small optimization which saves a couple of bus accesses for
> memory mapped IO registers.
> 
> To avoid "assigning in if clause" checkpatch errors", use a ret variable
> to store the wait_for macro return value.
> 
> Signed-off-by: Daniel Kurtz <djkurtz at chromium.org>
> ---
>  drivers/gpu/drm/i915/intel_i2c.c |   32 ++++++++++++++++++++------------
>  1 files changed, 20 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
> index c71f3dc..174fc71 100644
> --- a/drivers/gpu/drm/i915/intel_i2c.c
> +++ b/drivers/gpu/drm/i915/intel_i2c.c
> @@ -210,6 +210,7 @@ gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg,
>  	int reg_offset = dev_priv->gpio_mmio_base;
>  	u16 len = msg->len;
>  	u8 *buf = msg->buf;
> +	u32 gmbus2;
Does the temporary really need such broad scoping?

>  	I915_WRITE(GMBUS1 + reg_offset,
>  		   gmbus1 |
> @@ -219,13 +220,15 @@ gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg,
>  		   GMBUS_SLAVE_READ | GMBUS_SW_RDY);
>  	POSTING_READ(GMBUS2 + reg_offset);
Might as well shave this read as well.

>  	do {
> +		int ret;
>  		u32 val, loop = 0;
>  
> -		if (wait_for(I915_READ(GMBUS2 + reg_offset) &
> -			     (GMBUS_SATOER | GMBUS_HW_RDY),
> -			     50))
> +		ret = wait_for((gmbus2 = I915_READ(GMBUS2 + reg_offset)) &
> +			       (GMBUS_SATOER | GMBUS_HW_RDY),
> +			       50);
> +		if (ret)
>  			return -ETIMEDOUT;
> -		if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
> +		if (gmbus2 & GMBUS_SATOER)
>  			return -ENXIO;
>  
>  		val = I915_READ(GMBUS3 + reg_offset);
> @@ -245,6 +248,7 @@ gmbus_xfer_write(struct drm_i915_private *dev_priv, struct i2c_msg *msg)
>  	u16 len = msg->len;
>  	u8 *buf = msg->buf;
>  	u32 val, loop;
> +	u32 gmbus2;
>  
>  	val = loop = 0;
>  	while (len && loop < 4) {
> @@ -260,6 +264,7 @@ gmbus_xfer_write(struct drm_i915_private *dev_priv, struct i2c_msg *msg)
>  		   GMBUS_SLAVE_WRITE | GMBUS_SW_RDY);
>  	POSTING_READ(GMBUS2 + reg_offset);
>  	while (len) {
> +		int ret;
>  		val = loop = 0;
>  		do {
>  			val |= *buf++ << (8 * loop);
> @@ -268,11 +273,12 @@ gmbus_xfer_write(struct drm_i915_private *dev_priv, struct i2c_msg *msg)
>  		I915_WRITE(GMBUS3 + reg_offset, val);
>  		POSTING_READ(GMBUS2 + reg_offset);

And here.

-- 
Chris Wilson, Intel Open Source Technology Centre