[PATCH 7/7 v6] drm/i915/intel_i2c: remove POSTING_READ() from gmbus transfers

[Daniel Kurtz]

The POSTING_READ() calls were originally added to make sure the writes
were flushed before any timing delays and across loops.
Now that the code has settled a bit, let's remove them.

Signed-off-by: Daniel Kurtz <djkurtz at chromium.org>
---
 drivers/gpu/drm/i915/intel_i2c.c |    3 ---
 1 files changed, 0 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index 60f90cb..73431ed 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -217,7 +217,6 @@ gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg,
 		   (len << GMBUS_BYTE_COUNT_SHIFT) |
 		   (msg->addr << GMBUS_SLAVE_ADDR_SHIFT) |
 		   GMBUS_SLAVE_READ | GMBUS_SW_RDY);
-	POSTING_READ(GMBUS2 + reg_offset);
 	do {
 		int ret;
 		u32 val, loop = 0;
@@ -261,7 +260,6 @@ gmbus_xfer_write(struct drm_i915_private *dev_priv, struct i2c_msg *msg)
 		   (msg->len << GMBUS_BYTE_COUNT_SHIFT) |
 		   (msg->addr << GMBUS_SLAVE_ADDR_SHIFT) |
 		   GMBUS_SLAVE_WRITE | GMBUS_SW_RDY);
-	POSTING_READ(GMBUS2 + reg_offset);
 	while (len) {
 		int ret;
 		u32 gmbus2;
@@ -272,7 +270,6 @@ gmbus_xfer_write(struct drm_i915_private *dev_priv, struct i2c_msg *msg)
 		} while (--len && ++loop < 4);
 
 		I915_WRITE(GMBUS3 + reg_offset, val);
-		POSTING_READ(GMBUS2 + reg_offset);
 
 		ret = wait_for((gmbus2 = I915_READ(GMBUS2 + reg_offset)) &
 			       (GMBUS_SATOER | GMBUS_HW_RDY),
-- 
1.7.7.3