WARNING: at drivers/gpu/drm/i915/intel_display.c:1009 ironlake_crtc_disable+0xaf/0x8e0
Meelis Roos
mroos at linux.ee
Mon Nov 12 11:29:54 PST 2012
I tried 3.7-rc5 on an ironlale PC and got the warning in subject. The
computer last ran 3.6.0 without any warnings. Second reboot showed the
same warning plus a couple of EDID warnings (also below).
[ 0.000000] Linux version 3.7.0-rc5 (mroos at prometheus) (gcc version 4.7.2 (Debian 4.7.2-4) ) #70 SMP Mon Nov 12 18:20:25 EET 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.7.0-rc5 root=/dev/sda1 ro
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000db7ac43f] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db7ac440-0x00000000db7ae49f] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000db7ae4a0-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fed3ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed45000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000117ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Hewlett-Packard HP Compaq 8100 Elite SFF PC/304Ah, BIOS 786H1 v01.13 07/14/2011
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x118000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E3FFF write-protect
[ 0.000000] E4000-EFFFF write-back
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 0DB800000 mask FFF800000 uncachable
[ 0.000000] 2 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdb7ac max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f9bf0-0x000f9bff] mapped at [ffff8800000f9bf0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xdb7abfff]
[ 0.000000] [mem 0x00000000-0xdb5fffff] page 2M
[ 0.000000] [mem 0xdb600000-0xdb7abfff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xdb7abfff @ [mem 0x1fffa000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x117ffffff]
[ 0.000000] [mem 0x100000000-0x117ffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x117ffffff @ [mem 0xdb7aa000-0xdb7abfff]
[ 0.000000] ACPI: RSDP 00000000000e5210 00014 (v00 COMPAQ)
[ 0.000000] ACPI: RSDT 00000000db7d0540 00040 (v01 HPQOEM SLIC-BPC 20110714 00000000)
[ 0.000000] ACPI: FACP 00000000db7d05e8 00074 (v01 COMPAQ IBEXPEAK 00000001 00000000)
[ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000050/0x0 (20120913/tbfadt-598)
[ 0.000000] ACPI BIOS Bug: Warning: Invalid length for FADT/Pm2ControlBlock: 0, using default 8 (20120913/tbfadt-648)
[ 0.000000] ACPI: DSDT 00000000db7d0a4f 0A69E (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
[ 0.000000] ACPI: FACS 00000000db7d0500 00040
[ 0.000000] ACPI: APIC 00000000db7d065c 000BC (v01 COMPAQ IBEXPEAK 00000001 00000000)
[ 0.000000] ACPI: ASF! 00000000db7d0718 00063 (v32 COMPAQ IBEXPEAK 00000001 00000000)
[ 0.000000] ACPI: MCFG 00000000db7d077b 0003C (v01 COMPAQ IBEXPEAK 00000001 00000000)
[ 0.000000] ACPI: TCPA 00000000db7d07b7 00032 (v01 COMPAQ IBEXPEAK 00000001 00000000)
[ 0.000000] ACPI: SLIC 00000000db7d07e9 00176 (v01 HPQOEM SLIC-BPC 00000001 00000000)
[ 0.000000] ACPI: HPET 00000000db7d095f 00038 (v01 COMPAQ IBEXPEAK 00000001 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880113800000-ffff8801175fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x117ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xdb7abfff]
[ 0.000000] node 0: [mem 0x100000000-0x117ffffff]
[ 0.000000] On node 0 totalpages: 997179
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 878572 pages, LIFO batch:31
[ 0.000000] Normal zone: 1536 pages used for memmap
[ 0.000000] Normal zone: 96768 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0xf808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
[ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000db7ac000 - 00000000db7ad000
[ 0.000000] PM: Registered nosave memory: 00000000db7ad000 - 00000000db7ae000
[ 0.000000] PM: Registered nosave memory: 00000000db7ae000 - 00000000db7af000
[ 0.000000] PM: Registered nosave memory: 00000000db7af000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fe000000
[ 0.000000] PM: Registered nosave memory: 00000000fe000000 - 00000000fed40000
[ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000
[ 0.000000] PM: Registered nosave memory: 00000000fed45000 - 0000000100000000
[ 0.000000] e820: [mem 0xe0000000-0xf3ffffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880117c00000 s74048 r8192 d24256 u262144
[ 0.000000] pcpu-alloc: s74048 r8192 d24256 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 979253
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.7.0-rc5 root=/dev/sda1 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 3842432k/4587520k available (4385k kernel code, 598804k absent, 146284k reserved, 4154k data, 492k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 3325.358 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6650.71 BogoMIPS (lpj=13301432)
[ 0.000062] pid_max: default: 32768 minimum: 301
[ 0.000111] Mount-cache hash table entries: 256
[ 0.000264] CPU: Physical Processor ID: 0
[ 0.000291] CPU: Processor Core ID: 0
[ 0.000319] mce: CPU supports 9 MCE banks
[ 0.000353] CPU0: Thermal monitoring enabled (TM1)
[ 0.000385] process: using mwait in idle threads
[ 0.000415] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.000415] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.000415] tlb_flushall_shift: 6
[ 0.000565] Freeing SMP alternatives: 20k freed
[ 0.000599] ACPI: Core revision 20120913
[ 0.004737] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.044336] smpboot: CPU0: Intel(R) Core(TM) i5 CPU 660 @ 3.33GHz (fam: 06, model: 25, stepping: 05)
[ 0.151286] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.151366] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.151406] ... version: 3
[ 0.151438] ... bit width: 48
[ 0.151470] ... generic registers: 4
[ 0.151502] ... value mask: 0000ffffffffffff
[ 0.151538] ... max period: 000000007fffffff
[ 0.151573] ... fixed-purpose events: 3
[ 0.151605] ... event mask: 000000070000000f
[ 0.165018] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.151762] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.191397] Brought up 4 CPUs
[ 0.191452] smpboot: Total of 4 processors activated (26602.86 BogoMIPS)
[ 0.193278] PM: Registering ACPI NVS region [mem 0xdb7ac440-0xdb7ae49f] (8288 bytes)
[ 0.193345] reboot: BIOS series board detected. Selecting HP Compaq Laptop-method for reboots.
[ 0.193447] NET: Registered protocol family 16
[ 0.193550] ACPI: bus type pci registered
[ 0.193620] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[ 0.193684] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[ 0.196308] PCI: Using configuration type 1 for base access
[ 0.196724] bio: create slab <bio-0> at 0
[ 0.196791] ACPI: Added _OSI(Module Device)
[ 0.196825] ACPI: Added _OSI(Processor Device)
[ 0.196858] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.196892] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.197445] ACPI: EC: Look up EC in DSDT
[ 0.238080] ACPI: SSDT 00000000db7dc771 003BA (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
[ 0.238307] ACPI: Dynamic OEM Table Load:
[ 0.238348] ACPI: SSDT (null) 003BA (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
[ 0.269977] ACPI: SSDT 00000000db7dc399 003D8 (v01 COMPAQ CST 00000001 MSFT 0100000E)
[ 0.270190] ACPI: Dynamic OEM Table Load:
[ 0.270231] ACPI: SSDT (null) 003D8 (v01 COMPAQ CST 00000001 MSFT 0100000E)
[ 0.317970] ACPI: Interpreter enabled
[ 0.318004] ACPI: (supports S0 S3 S4 S5)
[ 0.318061] ACPI: Using IOAPIC for interrupt routing
[ 0.335638] ACPI: No dock devices found.
[ 0.335672] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.335880] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20120913/dsfield-211)
[ 0.335957] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880113442668), AE_ALREADY_EXISTS (20120913/psparse-536)
[ 0.336046] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[ 0.336116] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20120913/nspredef-359)
[ 0.336194] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.336406] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.336496] PCI host bridge to bus 0000:00
[ 0.337022] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.337058] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfdffffff]
[ 0.337098] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.337135] pci_bus 0000:00: root bus resource [io 0x1000-0x2fff]
[ 0.337174] pci_bus 0000:00: root bus resource [io 0x3000-0x6fff]
[ 0.337211] pci_bus 0000:00: root bus resource [io 0x7000-0xafff]
[ 0.337249] pci_bus 0000:00: root bus resource [io 0xb000-0xffff]
[ 0.337287] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.337327] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf3ffffff]
[ 0.337367] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 0.337411] pci 0000:00:00.0: [8086:0040] type 00 class 0x060000
[ 0.337424] DMAR: Disabling batched IOTLB flush on Ironlake
[ 0.337473] pci 0000:00:02.0: [8086:0042] type 00 class 0x030000
[ 0.337481] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.337485] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.337489] pci 0000:00:02.0: reg 20: [io 0x1170-0x1177]
[ 0.337531] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.337556] pci 0000:00:16.0: reg 10: [mem 0xf0427100-0xf042710f 64bit]
[ 0.337643] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.337663] pci 0000:00:16.3: [8086:3b67] type 00 class 0x070002
[ 0.337677] pci 0000:00:16.3: reg 10: [io 0x1188-0x118f]
[ 0.337683] pci 0000:00:16.3: reg 14: [mem 0xf0424000-0xf0424fff]
[ 0.337768] pci 0000:00:19.0: [8086:10ef] type 00 class 0x020000
[ 0.337781] pci 0000:00:19.0: reg 10: [mem 0xf0400000-0xf041ffff]
[ 0.337787] pci 0000:00:19.0: reg 14: [mem 0xf0425000-0xf0425fff]
[ 0.337793] pci 0000:00:19.0: reg 18: [io 0x1100-0x111f]
[ 0.337840] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.337859] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.337875] pci 0000:00:1a.0: reg 10: [mem 0xf0426800-0xf0426bff]
[ 0.337947] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.337966] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.337978] pci 0000:00:1b.0: reg 10: [mem 0xf0420000-0xf0423fff 64bit]
[ 0.338030] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.338046] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.338098] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.338116] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[ 0.338168] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.338184] pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400
[ 0.338236] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.338256] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.338272] pci 0000:00:1d.0: reg 10: [mem 0xf0426c00-0xf0426fff]
[ 0.338343] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.338358] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.338405] pci 0000:00:1f.0: [8086:3b0a] type 00 class 0x060100
[ 0.338507] pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601
[ 0.338521] pci 0000:00:1f.2: reg 10: [io 0x1190-0x1197]
[ 0.338526] pci 0000:00:1f.2: reg 14: [io 0x11a8-0x11ab]
[ 0.338533] pci 0000:00:1f.2: reg 18: [io 0x1198-0x119f]
[ 0.338539] pci 0000:00:1f.2: reg 1c: [io 0x11ac-0x11af]
[ 0.338544] pci 0000:00:1f.2: reg 20: [io 0x1120-0x113f]
[ 0.338550] pci 0000:00:1f.2: reg 24: [mem 0xf0426000-0xf04267ff]
[ 0.338584] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.338625] pci 0000:00:1c.0: PCI bridge to [bus 18]
[ 0.338693] pci 0000:00:1c.4: PCI bridge to [bus 24]
[ 0.338763] pci 0000:00:1c.6: PCI bridge to [bus 30]
[ 0.338847] pci 0000:00:1e.0: PCI bridge to [bus 0d] (subtractive decode)
[ 0.338891] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfdffffff] (subtractive decode)
[ 0.338892] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.338894] pci 0000:00:1e.0: bridge window [io 0x1000-0x2fff] (subtractive decode)
[ 0.338895] pci 0000:00:1e.0: bridge window [io 0x3000-0x6fff] (subtractive decode)
[ 0.338896] pci 0000:00:1e.0: bridge window [io 0x7000-0xafff] (subtractive decode)
[ 0.338897] pci 0000:00:1e.0: bridge window [io 0xb000-0xffff] (subtractive decode)
[ 0.338898] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.338899] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf3ffffff] (subtractive decode)
[ 0.338901] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.338913] pci_bus 0000:00: on NUMA node 0
[ 0.338916] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.339003] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
[ 0.339028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX5._PRT]
[ 0.339050] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX7._PRT]
[ 0.339072] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[ 0.339151] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20120913/dsfield-211)
[ 0.339227] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880113442668), AE_ALREADY_EXISTS (20120913/psparse-536)
[ 0.339316] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20120913/nspredef-359)
[ 0.339395] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.339455] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.342593] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.342703] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.342809] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.342914] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.343018] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.343123] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.343228] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.343332] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.343476] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.343538] vgaarb: loaded
[ 0.343567] vgaarb: bridge control possible 0000:00:02.0
[ 0.343631] SCSI subsystem initialized
[ 0.343663] ACPI: bus type scsi registered
[ 0.343714] libata version 3.00 loaded.
[ 0.343729] PCI: Using ACPI for IRQ routing
[ 0.344864] PCI: Discovered peer bus 3f
[ 0.344896] PCI: root bus 3f: using default resources
[ 0.344897] PCI: Probing PCI hardware (bus 3f)
[ 0.344910] PCI host bridge to bus 0000:3f
[ 0.344944] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
[ 0.344982] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.345021] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
[ 0.345085] pci 0000:3f:00.0: [8086:2c61] type 00 class 0x060000
[ 0.345098] pci 0000:3f:00.1: [8086:2d01] type 00 class 0x060000
[ 0.345111] pci 0000:3f:02.0: [8086:2d10] type 00 class 0x060000
[ 0.345123] pci 0000:3f:02.1: [8086:2d11] type 00 class 0x060000
[ 0.345135] pci 0000:3f:02.2: [8086:2d12] type 00 class 0x060000
[ 0.345147] pci 0000:3f:02.3: [8086:2d13] type 00 class 0x060000
[ 0.345165] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
[ 0.345227] PCI: pci_cache_line_size set to 64 bytes
[ 0.345259] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.345260] e820: reserve RAM buffer [mem 0xdb7ac440-0xdbffffff]
[ 0.345321] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.345396] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.347436] Switching to clocksource hpet
[ 0.347499] pnp: PnP ACPI init
[ 0.347534] ACPI: bus type pnp registered
[ 0.347665] pnp 00:00: [mem 0xf8000000-0xfdffffff window]
[ 0.347667] pnp 00:00: [bus 00-ff]
[ 0.347668] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.347669] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.347670] pnp 00:00: [io 0x1000-0x2fff window]
[ 0.347672] pnp 00:00: [io 0x3000-0x6fff window]
[ 0.347673] pnp 00:00: [io 0x7000-0xafff window]
[ 0.347674] pnp 00:00: [io 0xb000-0xffff window]
[ 0.347675] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.347676] pnp 00:00: [mem 0xe0000000-0xf3ffffff window]
[ 0.347677] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.347691] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.347698] pnp 00:01: [io 0x00f0-0x00ff]
[ 0.347704] pnp 00:01: [irq 13]
[ 0.347714] pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.347720] pnp 00:02: [io 0x0000-0x000f]
[ 0.347721] pnp 00:02: [io 0x0080-0x008f]
[ 0.347722] pnp 00:02: [io 0x00c0-0x00df]
[ 0.347723] pnp 00:02: [dma 4]
[ 0.347732] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.347736] pnp 00:03: [io 0x0070-0x0071]
[ 0.347739] pnp 00:03: [irq 8]
[ 0.347748] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.347753] pnp 00:04: [io 0x0061]
[ 0.347761] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.347768] pnp 00:05: [irq 12]
[ 0.347778] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
[ 0.347782] pnp 00:06: [io 0x0060]
[ 0.347783] pnp 00:06: [io 0x0064]
[ 0.347787] pnp 00:06: [irq 1]
[ 0.347796] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.347943] pnp 00:07: [irq 7]
[ 0.347944] pnp 00:07: [dma 3]
[ 0.347945] pnp 00:07: [io 0x0378-0x037f]
[ 0.347946] pnp 00:07: [io 0x0778-0x077d]
[ 0.347981] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.348100] pnp 00:08: [irq 4]
[ 0.348101] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.348136] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[ 0.348164] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.348174] pnp 00:09: Plug and Play ACPI device, IDs PNP0003 (active)
[ 0.348179] pnp 00:0a: [io 0x004e-0x004f]
[ 0.348180] pnp 00:0a: [io 0x0cb0-0x0cbb]
[ 0.348181] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.348191] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.348209] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
[ 0.348218] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.348316] pnp 00:0c: [io 0x0010-0x001f]
[ 0.348317] pnp 00:0c: [io 0x0050-0x0053]
[ 0.348318] pnp 00:0c: [io 0x0072-0x0077]
[ 0.348319] pnp 00:0c: [io 0x0090-0x009f]
[ 0.348337] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.348347] pnp 00:0d: [io 0x04d0-0x04d1]
[ 0.348363] system 00:0d: [io 0x04d0-0x04d1] has been reserved
[ 0.348401] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.348410] pnp 00:0e: [io 0x0400-0x041f]
[ 0.348412] pnp 00:0e: [io 0x0420-0x043f]
[ 0.348413] pnp 00:0e: [io 0x0440-0x045f]
[ 0.348414] pnp 00:0e: [io 0x0460-0x047f]
[ 0.348415] pnp 00:0e: [io 0x0480-0x048f]
[ 0.348416] pnp 00:0e: [io 0xf800-0xf81f]
[ 0.348417] pnp 00:0e: [io 0xf820-0xf83f]
[ 0.348418] pnp 00:0e: [io 0xf840-0xf85f]
[ 0.348419] pnp 00:0e: [io 0xf860-0xf87f]
[ 0.348420] pnp 00:0e: [io 0xfa00-0xfa3f]
[ 0.348421] pnp 00:0e: [io 0xfc00-0xfc7f]
[ 0.348422] pnp 00:0e: [io 0xfc80-0xfcff]
[ 0.348423] pnp 00:0e: [io 0xfe00-0xfe7f]
[ 0.348424] pnp 00:0e: [io 0xfe80-0xfeff]
[ 0.348441] system 00:0e: [io 0x0400-0x041f] has been reserved
[ 0.348479] system 00:0e: [io 0x0420-0x043f] has been reserved
[ 0.348516] system 00:0e: [io 0x0440-0x045f] has been reserved
[ 0.348554] system 00:0e: [io 0x0460-0x047f] has been reserved
[ 0.348591] system 00:0e: [io 0x0480-0x048f] has been reserved
[ 0.348629] system 00:0e: [io 0xf800-0xf81f] has been reserved
[ 0.348666] system 00:0e: [io 0xf820-0xf83f] has been reserved
[ 0.348703] system 00:0e: [io 0xf840-0xf85f] has been reserved
[ 0.348740] system 00:0e: [io 0xf860-0xf87f] has been reserved
[ 0.348778] system 00:0e: [io 0xfa00-0xfa3f] has been reserved
[ 0.348815] system 00:0e: [io 0xfc00-0xfc7f] has been reserved
[ 0.348852] system 00:0e: [io 0xfc80-0xfcff] has been reserved
[ 0.348889] system 00:0e: [io 0xfe00-0xfe7f] has been reserved
[ 0.348927] system 00:0e: [io 0xfe80-0xfeff] has been reserved
[ 0.348965] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.349118] pnp 00:0f: [mem 0x00000000-0x0009ffff]
[ 0.349119] pnp 00:0f: [mem 0x00100000-0xdfffffff]
[ 0.349120] pnp 00:0f: [mem 0x000e4000-0x000fffff]
[ 0.349121] pnp 00:0f: [mem 0xfec01000-0xfecfffff]
[ 0.349122] pnp 00:0f: [mem 0xfed00400-0xfed3ffff]
[ 0.349123] pnp 00:0f: [mem 0xfed45000-0xffffffff]
[ 0.349124] pnp 00:0f: [mem 0xf4000000-0xf7ffffff]
[ 0.349126] pnp 00:0f: [mem 0x000cfe00-0x000e3fff]
[ 0.349148] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.349189] system 00:0f: [mem 0x00100000-0xdfffffff] could not be reserved
[ 0.349229] system 00:0f: [mem 0x000e4000-0x000fffff] could not be reserved
[ 0.349269] system 00:0f: [mem 0xfec01000-0xfecfffff] has been reserved
[ 0.349308] system 00:0f: [mem 0xfed00400-0xfed3ffff] has been reserved
[ 0.349348] system 00:0f: [mem 0xfed45000-0xffffffff] has been reserved
[ 0.349387] system 00:0f: [mem 0xf4000000-0xf7ffffff] has been reserved
[ 0.349426] system 00:0f: [mem 0x000cfe00-0x000e3fff] has been reserved
[ 0.349465] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.349472] pnp: PnP ACPI: found 16 devices
[ 0.349505] ACPI: ACPI bus type pnp unregistered
[ 0.354506] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 18] add_size 1000
[ 0.354509] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 18] add_size 200000
[ 0.354511] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 18] add_size 200000
[ 0.354516] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 24] add_size 1000
[ 0.354518] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 24] add_size 200000
[ 0.354519] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 24] add_size 200000
[ 0.354525] pci 0000:00:1c.6: bridge window [io 0x1000-0x0fff] to [bus 30] add_size 1000
[ 0.354526] pci 0000:00:1c.6: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 30] add_size 200000
[ 0.354528] pci 0000:00:1c.6: bridge window [mem 0x00100000-0x000fffff] to [bus 30] add_size 200000
[ 0.354537] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.354538] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.354540] pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.354541] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.354542] pci 0000:00:1c.6: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.354544] pci 0000:00:1c.6: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.354545] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.354546] pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.354548] pci 0000:00:1c.6: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.354550] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff]
[ 0.354591] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref]
[ 0.354651] pci 0000:00:1c.4: BAR 14: assigned [mem 0xf8400000-0xf85fffff]
[ 0.354691] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf8600000-0xf87fffff 64bit pref]
[ 0.354752] pci 0000:00:1c.6: BAR 14: assigned [mem 0xf8800000-0xf89fffff]
[ 0.354792] pci 0000:00:1c.6: BAR 15: assigned [mem 0xf8a00000-0xf8bfffff 64bit pref]
[ 0.354853] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.354891] pci 0000:00:1c.4: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.354929] pci 0000:00:1c.6: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.354968] pci 0000:00:1c.0: PCI bridge to [bus 18]
[ 0.355004] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.355044] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf81fffff]
[ 0.355084] pci 0000:00:1c.0: bridge window [mem 0xf8200000-0xf83fffff 64bit pref]
[ 0.355147] pci 0000:00:1c.4: PCI bridge to [bus 24]
[ 0.355183] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.355222] pci 0000:00:1c.4: bridge window [mem 0xf8400000-0xf85fffff]
[ 0.355263] pci 0000:00:1c.4: bridge window [mem 0xf8600000-0xf87fffff 64bit pref]
[ 0.355326] pci 0000:00:1c.6: PCI bridge to [bus 30]
[ 0.355361] pci 0000:00:1c.6: bridge window [io 0x4000-0x4fff]
[ 0.355401] pci 0000:00:1c.6: bridge window [mem 0xf8800000-0xf89fffff]
[ 0.355442] pci 0000:00:1c.6: bridge window [mem 0xf8a00000-0xf8bfffff 64bit pref]
[ 0.355509] pci 0000:00:1e.0: PCI bridge to [bus 0d]
[ 0.355568] pci 0000:00:1e.0: setting latency timer to 64
[ 0.355571] pci_bus 0000:00: resource 4 [mem 0xf8000000-0xfdffffff]
[ 0.355572] pci_bus 0000:00: resource 5 [io 0x0000-0x0cf7]
[ 0.355573] pci_bus 0000:00: resource 6 [io 0x1000-0x2fff]
[ 0.355574] pci_bus 0000:00: resource 7 [io 0x3000-0x6fff]
[ 0.355575] pci_bus 0000:00: resource 8 [io 0x7000-0xafff]
[ 0.355576] pci_bus 0000:00: resource 9 [io 0xb000-0xffff]
[ 0.355577] pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff]
[ 0.355579] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xf3ffffff]
[ 0.355580] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff]
[ 0.355581] pci_bus 0000:18: resource 0 [io 0x2000-0x2fff]
[ 0.355582] pci_bus 0000:18: resource 1 [mem 0xf8000000-0xf81fffff]
[ 0.355583] pci_bus 0000:18: resource 2 [mem 0xf8200000-0xf83fffff 64bit pref]
[ 0.355585] pci_bus 0000:24: resource 0 [io 0x3000-0x3fff]
[ 0.355586] pci_bus 0000:24: resource 1 [mem 0xf8400000-0xf85fffff]
[ 0.355587] pci_bus 0000:24: resource 2 [mem 0xf8600000-0xf87fffff 64bit pref]
[ 0.355588] pci_bus 0000:30: resource 0 [io 0x4000-0x4fff]
[ 0.355589] pci_bus 0000:30: resource 1 [mem 0xf8800000-0xf89fffff]
[ 0.355590] pci_bus 0000:30: resource 2 [mem 0xf8a00000-0xf8bfffff 64bit pref]
[ 0.355592] pci_bus 0000:0d: resource 4 [mem 0xf8000000-0xfdffffff]
[ 0.355593] pci_bus 0000:0d: resource 5 [io 0x0000-0x0cf7]
[ 0.355594] pci_bus 0000:0d: resource 6 [io 0x1000-0x2fff]
[ 0.355595] pci_bus 0000:0d: resource 7 [io 0x3000-0x6fff]
[ 0.355596] pci_bus 0000:0d: resource 8 [io 0x7000-0xafff]
[ 0.355597] pci_bus 0000:0d: resource 9 [io 0xb000-0xffff]
[ 0.355598] pci_bus 0000:0d: resource 10 [mem 0x000a0000-0x000bffff]
[ 0.355600] pci_bus 0000:0d: resource 11 [mem 0xe0000000-0xf3ffffff]
[ 0.355601] pci_bus 0000:0d: resource 12 [mem 0xfed40000-0xfed44fff]
[ 0.355602] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
[ 0.355603] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.355620] NET: Registered protocol family 2
[ 0.355740] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.356443] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.356680] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.356747] TCP: reno registered
[ 0.356779] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.356830] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.356935] NET: Registered protocol family 1
[ 0.356980] pci 0000:00:02.0: Boot video device
[ 0.357055] PCI: CLS 64 bytes, default 64
[ 0.357071] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.357111] software IO TLB [mem 0xd77aa000-0xdb7a9fff] (64MB) mapped at [ffff8800d77aa000-ffff8800db7a9fff]
[ 0.357528] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.358288] VFS: Disk quotas dquot_6.5.2
[ 0.358345] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.358550] msgmni has been set to 7504
[ 0.358737] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.358798] io scheduler noop registered
[ 0.358831] io scheduler deadline registered
[ 0.358865] io scheduler cfq registered (default)
[ 0.359022] intel_idle: MWAIT substates: 0x1120
[ 0.359023] intel_idle: v0.4 model 0x25
[ 0.359023] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.359083] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.359147] ACPI: Power Button [PBTN]
[ 0.359201] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.359260] ACPI: Power Button [PWRF]
[ 0.359315] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.379703] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.400007] 0000:00:16.3: ttyS1 at I/O 0x1188 (irq = 17) is a 16550A
[ 0.400148] Linux agpgart interface v0.103
[ 0.400209] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 0.400283] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.400986] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 0.401097] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 0.401171] [drm] Initialized drm 1.1.0 20060810
[ 0.401318] i915 0000:00:02.0: setting latency timer to 64
[ 0.413907] i915 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.413912] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.413951] [drm] Driver supports precise vblank timestamp query.
[ 0.414013] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.515445] fbcon: inteldrmfb (fb0) is primary device
[ 0.646568] ------------[ cut here ]------------
[ 0.646573] WARNING: at drivers/gpu/drm/i915/intel_display.c:1009 ironlake_crtc_disable+0xaf/0x8e0()
[ 0.646574] Hardware name: HP Compaq 8100 Elite SFF PC
[ 0.646574] pipe_off wait timed out
[ 0.646575] Modules linked in:
[ 0.646576] Pid: 1, comm: swapper/0 Not tainted 3.7.0-rc5 #70
[ 0.646577] Call Trace:
[ 0.646582] [<ffffffff81036899>] ? warn_slowpath_common+0x79/0xc0
[ 0.646583] [<ffffffff81036995>] ? warn_slowpath_fmt+0x45/0x50
[ 0.646585] [<ffffffff812b57cb>] ? intel_wait_for_pipe_off+0x5b/0x170
[ 0.646586] [<ffffffff812b617f>] ? ironlake_crtc_disable+0xaf/0x8e0
[ 0.646588] [<ffffffff812c5499>] ? intel_dp_mode_fixup+0x249/0x270
[ 0.646589] [<ffffffff812bce86>] ? intel_set_mode+0x306/0x920
[ 0.646591] [<ffffffff812bdb91>] ? intel_crtc_set_config+0x6f1/0x950
[ 0.646594] [<ffffffff81274f3f>] ? drm_fb_helper_set_par+0x6f/0xe0
[ 0.646598] [<ffffffff8120c29f>] ? fbcon_init+0x55f/0x5f0
[ 0.646600] [<ffffffff8125aa6c>] ? visual_init+0xac/0x110
[ 0.646601] [<ffffffff8125c2cc>] ? bind_con_driver+0x16c/0x340
[ 0.646602] [<ffffffff8125c500>] ? take_over_console+0x60/0x70
[ 0.646604] [<ffffffff8120a64b>] ? fbcon_takeover+0x5b/0xc0
[ 0.646607] [<ffffffff81059375>] ? notifier_call_chain+0x45/0x60
[ 0.646608] [<ffffffff81059555>] ? __blocking_notifier_call_chain+0x55/0x80
[ 0.646609] [<ffffffff81203c3f>] ? register_framebuffer+0x1af/0x2e0
[ 0.646611] [<ffffffff812751a4>] ? drm_fb_helper_single_fb_probe+0x1f4/0x320
[ 0.646612] [<ffffffff81275479>] ? drm_fb_helper_initial_config+0x1a9/0x220
[ 0.646615] [<ffffffff810dd04d>] ? __kmalloc+0xed/0x130
[ 0.646617] [<ffffffff812d684d>] ? intel_fbdev_init+0x7d/0xb0
[ 0.646619] [<ffffffff81298935>] ? i915_driver_load+0xd95/0xf00
[ 0.646622] [<ffffffff81283a85>] ? drm_get_pci_dev+0x185/0x2c0
[ 0.646623] [<ffffffff811f3821>] ? pci_device_probe+0xd1/0x170
[ 0.646625] [<ffffffff812e9878>] ? driver_probe_device+0x68/0x220
[ 0.646626] [<ffffffff812e9ac3>] ? __driver_attach+0x93/0xa0
[ 0.646627] [<ffffffff812e9a30>] ? driver_probe_device+0x220/0x220
[ 0.646629] [<ffffffff812e7d0d>] ? bus_for_each_dev+0x4d/0x80
[ 0.646630] [<ffffffff812e8fe8>] ? bus_add_driver+0x178/0x260
[ 0.646631] [<ffffffff812ea0c4>] ? driver_register+0x84/0x180
[ 0.646634] [<ffffffff8188c7a7>] ? drm_core_init+0x12f/0x12f
[ 0.646636] [<ffffffff810002e2>] ? do_one_initcall+0x122/0x170
[ 0.646638] [<ffffffff8142ba5c>] ? kernel_init+0x11c/0x2a0
[ 0.646641] [<ffffffff8186c54a>] ? do_early_param+0x83/0x83
[ 0.646643] [<ffffffff8105e761>] ? schedule_tail+0x21/0xb0
[ 0.646644] [<ffffffff8142b940>] ? rest_init+0x70/0x70
[ 0.646645] [<ffffffff814448ac>] ? ret_from_fork+0x7c/0xb0
[ 0.646646] [<ffffffff8142b940>] ? rest_init+0x70/0x70
[ 0.646651] ---[ end trace ad57c7783ee30339 ]---
[ 0.702399] [drm:intel_disable_transcoder] *ERROR* failed to disable transcoder 0
[ 0.937367] Console: switching to colour frame buffer device 240x67
[ 0.948050] fb0: inteldrmfb frame buffer device
[ 0.949269] drm: registered panic notifier
[ 0.950530] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20120913/video-1149)
[ 0.951757] ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no)
[ 0.953010] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2
[ 0.954262] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 0.955546] ahci 0000:00:1f.2: version 3.0
[ 0.955588] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 0.955636] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x17 impl SATA mode
[ 0.956866] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part sxs apst
[ 0.958091] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.958409] scsi0 : ahci
[ 0.959677] scsi1 : ahci
[ 0.960917] scsi2 : ahci
[ 0.962143] scsi3 : ahci
[ 0.963351] scsi4 : ahci
[ 0.964546] scsi5 : ahci
[ 0.965719] ata1: SATA max UDMA/133 abar m2048 at 0xf0426000 port 0xf0426100 irq 41
[ 0.966897] ata2: SATA max UDMA/133 abar m2048 at 0xf0426000 port 0xf0426180 irq 41
[ 0.968063] ata3: SATA max UDMA/133 abar m2048 at 0xf0426000 port 0xf0426200 irq 41
[ 0.969212] ata4: DUMMY
[ 0.970370] ata5: SATA max UDMA/133 abar m2048 at 0xf0426000 port 0xf0426300 irq 41
[ 0.971552] ata6: DUMMY
[ 0.972775] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 0.976745] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.977952] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.979189] mousedev: PS/2 mouse device common for all mice
[ 0.980406] rtc_cmos 00:03: RTC can wake from S4
[ 0.981688] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.982896] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.984126] cpuidle: using governor ladder
[ 0.985359] cpuidle: using governor menu
[ 0.986614] TCP: cubic registered
[ 0.987853] NET: Registered protocol family 10
[ 0.989145] mip6: Mobile IPv6
[ 0.990341] NET: Registered protocol family 17
[ 0.991550] Key type dns_resolver registered
[ 0.992842] PM: Hibernation image not present or could not be loaded.
[ 0.992848] registered taskstats version 1
[ 0.994314] rtc_cmos 00:03: setting system clock to 2012-11-12 18:46:20 UTC (1352745980)
[ 1.288695] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.290496] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.291755] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.293545] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.294879] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 1.296138] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[ 1.297457] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 1.298701] ata2.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[ 1.299943] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.301182] ata2.00: ATAPI: hp CDDVDW TS-H653T, H6D1, max UDMA/100
[ 1.302432] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[ 1.302655] ata1.00: ACPI cmd e3/00:00:00:00:00:a0 (IDLE) succeeded
[ 1.302661] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.303982] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.305247] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.307540] ata1.00: ATA-8: Hitachi HDS721025CLA682, JP1OA41A, max UDMA/133
[ 1.308996] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.310827] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 1.312123] ata2.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[ 1.313417] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.314708] ata2.00: configured for UDMA/100
[ 1.316076] ata1.00: failed to get Identify Device Data, Emask 0x1
[ 1.317204] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 1.318527] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[ 1.320053] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[ 1.320269] ata1.00: ACPI cmd e3/00:00:00:00:00:a0 (IDLE) succeeded
[ 1.320274] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.321710] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.323057] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.325585] ata1.00: failed to get Identify Device Data, Emask 0x1
[ 1.325591] ata1.00: configured for UDMA/133
[ 1.327208] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72102 JP1O PQ: 0 ANSI: 5
[ 1.328792] ACPI: Invalid Power Resource to register!
[ 1.328823] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.330273] sd 0:0:0:0: [sda] Write Protect is off
[ 1.330308] scsi 1:0:0:0: CD-ROM hp CDDVDW TS-H653T H6D1 PQ: 0 ANSI: 5
[ 1.333114] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.333127] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.352502] tsc: Refined TSC clocksource calibration: 3325.374 MHz
[ 1.353959] Switching to clocksource tsc
[ 1.378599] sda: sda1 sda2 < sda5 >
[ 1.380167] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.528194] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.529612] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
[ 1.531495] Freeing unused kernel memory: 492k freed
[ 1.532988] Write protecting the kernel read-only data: 8192k
[ 1.537179] Freeing unused kernel memory: 1748k freed
[ 1.539892] Freeing unused kernel memory: 688k freed
[ 4.139209] ACPI: Invalid PBLK length [7]
[ 4.140768] ACPI: Requesting acpi_cpufreq
[ 4.142356] ACPI: Invalid PBLK length [7]
[ 4.143784] ACPI: Invalid PBLK length [7]
[ 4.145232] ACPI: Invalid PBLK length [7]
[ 4.213175] microcode: CPU0 sig=0x20655, pf=0x2, revision=0x2
[ 4.281869] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
[ 4.283260] microcode: CPU1 sig=0x20655, pf=0x2, revision=0x2
[ 4.284782] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
[ 4.286156] microcode: CPU2 sig=0x20655, pf=0x2, revision=0x2
[ 4.288113] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
[ 4.289851] microcode: CPU3 sig=0x20655, pf=0x2, revision=0x2
[ 4.291340] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
[ 4.292774] microcode: Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
[ 4.409720] mei 0000:00:16.0: setting latency timer to 64
[ 4.409777] mei 0000:00:16.0: irq 42 for MSI/MSI-X
[ 4.416630] e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
[ 4.417978] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
[ 4.419675] e1000e 0000:00:19.0: setting latency timer to 64
[ 4.419719] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 4.421705] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 4.481786] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 4.497651] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16)
[ 4.551176] wmi: Mapper loaded
[ 4.568329] ACPI: bus type usb registered
[ 4.569761] usbcore: registered new interface driver usbfs
[ 4.571193] usbcore: registered new interface driver hub
[ 4.572615] usbcore: registered new device driver usb
[ 4.612050] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 78:e3:b5:a0:e5:e4
[ 4.613439] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 4.614912] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 9, PBA No: A002FF-0FF
[ 4.738867] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.740283] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.740318] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 4.740320] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 4.740324] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 4.744210] ehci_hcd 0000:00:1a.0: debug port 2
[ 4.744216] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 4.744241] ehci_hcd 0000:00:1a.0: irq 20, io mem 0xf0426800
[ 4.747763] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.749486] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.750098] tpm_tis 00:0a: TPM is disabled/deactivated (0x7)
[ 4.751559] parport_pc 00:07: reported by Plug and Play ACPI
[ 4.753111] gpio_ich: GPIO from 180 to 255 on gpio_ich
[ 1.330379] ACPI: Invalid Power Resource to register!
[ 4.753133] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 4.754061] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 4.754086] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.754087] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.754088] usb usb1: Product: EHCI Host Controller
[ 4.754089] usb usb1: Manufacturer: Linux 3.7.0-rc5 ehci_hcd
[ 4.754090] usb usb1: SerialNumber: 0000:00:1a.0
[ 4.754156] hub 1-0:1.0: USB hub found
[ 4.754159] hub 1-0:1.0: 3 ports detected
[ 4.754280] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.754281] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 4.754285] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 4.758174] ehci_hcd 0000:00:1d.0: debug port 2
[ 4.758178] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 4.758182] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xf0426c00
[ 4.770048] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 4.770071] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.770072] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.770074] usb usb2: Product: EHCI Host Controller
[ 4.770075] usb usb2: Manufacturer: Linux 3.7.0-rc5 ehci_hcd
[ 4.770076] usb usb2: SerialNumber: 0000:00:1d.0
[ 4.770136] hub 2-0:1.0: USB hub found
[ 4.770140] hub 2-0:1.0: 3 ports detected
[ 4.786391] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.787633] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.848246] iTCO_vendor_support: vendor-support=0
[ 4.957949] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 4.960690] iTCO_wdt: Found a Q57 TCO device (Version=2, TCOBASE=0xf860)
[ 4.963462] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.065214] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 5.197222] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 5.198503] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.199867] hub 1-1:1.0: USB hub found
[ 5.201301] hub 1-1:1.0: 6 ports detected
[ 5.295371] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 5.312411] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 5.321151] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 5.444428] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 5.445722] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.447163] hub 2-1:1.0: USB hub found
[ 5.449894] hub 2-1:1.0: 8 ports detected
[ 5.487022] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 5.523854] usb 1-1.1: new high-speed USB device number 3 using ehci_hcd
[ 5.615947] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2512
[ 5.618716] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.621858] hub 1-1.1:1.0: USB hub found
[ 5.624751] hub 1-1.1:1.0: 2 ports detected
[ 5.699406] usb 1-1.2: new low-speed USB device number 4 using ehci_hcd
[ 5.820288] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c30e
[ 5.823047] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.825680] usb 1-1.2: Product: HID compliant keyboard
[ 5.828320] usb 1-1.2: Manufacturer: Logitech
[ 6.067161] usbcore: registered new interface driver usbhid
[ 6.069833] usbhid: USB HID core driver
[ 6.082958] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5
[ 6.084346] hid-generic 0003:046D:C30E.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:1a.0-1.2/input0
[ 6.088606] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input6
[ 6.091721] hid-generic 0003:046D:C30E.0002: input,hidraw1: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:1a.0-1.2/input1
[ 7.424809] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 7.427918] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 7.430992] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 7.434070] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 7.435447] input: HDA Intel MID Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 9.532163] Adding 7532540k swap on /dev/sda5. Priority:-1 extents:1 across:7532540k
[ 9.559939] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 9.773619] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 10.214511] fuse init (API version 7.20)
[ 10.243899] loop: module loaded
[ 14.526314] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 14.628097] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 14.628220] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.108997] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 16.112283] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[ 16.119439] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 20.614348] lp0: using parport0 (interrupt-driven).
[ 0.000000] Linux version 3.7.0-rc5 (mroos at prometheus) (gcc version 4.7.2 (Debian 4.7.2-4) ) #70 SMP Mon Nov 12 18:20:25 EET 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.7.0-rc5 root=/dev/sda1 ro
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000db7ac43f] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db7ac440-0x00000000db7ae49f] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000db7ae4a0-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fed3ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed45000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000117ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Hewlett-Packard HP Compaq 8100 Elite SFF PC/304Ah, BIOS 786H1 v01.13 07/14/2011
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x118000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E3FFF write-protect
[ 0.000000] E4000-EFFFF write-back
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 0DB800000 mask FFF800000 uncachable
[ 0.000000] 2 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdb7ac max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f9bf0-0x000f9bff] mapped at [ffff8800000f9bf0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xdb7abfff]
[ 0.000000] [mem 0x00000000-0xdb5fffff] page 2M
[ 0.000000] [mem 0xdb600000-0xdb7abfff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xdb7abfff @ [mem 0x1fffa000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x117ffffff]
[ 0.000000] [mem 0x100000000-0x117ffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x117ffffff @ [mem 0xdb7aa000-0xdb7abfff]
[ 0.000000] ACPI: RSDP 00000000000e5210 00014 (v00 COMPAQ)
[ 0.000000] ACPI: RSDT 00000000db7d0540 00040 (v01 HPQOEM SLIC-BPC 20110714 00000000)
[ 0.000000] ACPI: FACP 00000000db7d05e8 00074 (v01 COMPAQ IBEXPEAK 00000001 00000000)
[ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000050/0x0 (20120913/tbfadt-598)
[ 0.000000] ACPI BIOS Bug: Warning: Invalid length for FADT/Pm2ControlBlock: 0, using default 8 (20120913/tbfadt-648)
[ 0.000000] ACPI: DSDT 00000000db7d0a4f 0A69E (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
[ 0.000000] ACPI: FACS 00000000db7d0500 00040
[ 0.000000] ACPI: APIC 00000000db7d065c 000BC (v01 COMPAQ IBEXPEAK 00000001 00000000)
[ 0.000000] ACPI: ASF! 00000000db7d0718 00063 (v32 COMPAQ IBEXPEAK 00000001 00000000)
[ 0.000000] ACPI: MCFG 00000000db7d077b 0003C (v01 COMPAQ IBEXPEAK 00000001 00000000)
[ 0.000000] ACPI: TCPA 00000000db7d07b7 00032 (v01 COMPAQ IBEXPEAK 00000001 00000000)
[ 0.000000] ACPI: SLIC 00000000db7d07e9 00176 (v01 HPQOEM SLIC-BPC 00000001 00000000)
[ 0.000000] ACPI: HPET 00000000db7d095f 00038 (v01 COMPAQ IBEXPEAK 00000001 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880113800000-ffff8801175fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x117ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xdb7abfff]
[ 0.000000] node 0: [mem 0x100000000-0x117ffffff]
[ 0.000000] On node 0 totalpages: 997179
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 878572 pages, LIFO batch:31
[ 0.000000] Normal zone: 1536 pages used for memmap
[ 0.000000] Normal zone: 96768 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0xf808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
[ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000db7ac000 - 00000000db7ad000
[ 0.000000] PM: Registered nosave memory: 00000000db7ad000 - 00000000db7ae000
[ 0.000000] PM: Registered nosave memory: 00000000db7ae000 - 00000000db7af000
[ 0.000000] PM: Registered nosave memory: 00000000db7af000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fe000000
[ 0.000000] PM: Registered nosave memory: 00000000fe000000 - 00000000fed40000
[ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000
[ 0.000000] PM: Registered nosave memory: 00000000fed45000 - 0000000100000000
[ 0.000000] e820: [mem 0xe0000000-0xf3ffffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880117c00000 s74048 r8192 d24256 u262144
[ 0.000000] pcpu-alloc: s74048 r8192 d24256 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 979253
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.7.0-rc5 root=/dev/sda1 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 3842432k/4587520k available (4385k kernel code, 598804k absent, 146284k reserved, 4154k data, 492k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 3325.058 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6650.11 BogoMIPS (lpj=13300232)
[ 0.000062] pid_max: default: 32768 minimum: 301
[ 0.000111] Mount-cache hash table entries: 256
[ 0.000264] CPU: Physical Processor ID: 0
[ 0.000291] CPU: Processor Core ID: 0
[ 0.000319] mce: CPU supports 9 MCE banks
[ 0.000352] CPU0: Thermal monitoring enabled (TM1)
[ 0.000385] process: using mwait in idle threads
[ 0.000414] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.000414] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.000414] tlb_flushall_shift: 6
[ 0.000565] Freeing SMP alternatives: 20k freed
[ 0.000599] ACPI: Core revision 20120913
[ 0.004736] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.044332] smpboot: CPU0: Intel(R) Core(TM) i5 CPU 660 @ 3.33GHz (fam: 06, model: 25, stepping: 05)
[ 0.151074] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.151155] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.151195] ... version: 3
[ 0.151227] ... bit width: 48
[ 0.151259] ... generic registers: 4
[ 0.151291] ... value mask: 0000ffffffffffff
[ 0.151327] ... max period: 000000007fffffff
[ 0.151362] ... fixed-purpose events: 3
[ 0.151394] ... event mask: 000000070000000f
[ 0.164811] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.151552] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.191186] Brought up 4 CPUs
[ 0.191240] smpboot: Total of 4 processors activated (26600.46 BogoMIPS)
[ 0.193070] PM: Registering ACPI NVS region [mem 0xdb7ac440-0xdb7ae49f] (8288 bytes)
[ 0.193137] reboot: BIOS series board detected. Selecting HP Compaq Laptop-method for reboots.
[ 0.193239] NET: Registered protocol family 16
[ 0.193341] ACPI: bus type pci registered
[ 0.193411] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[ 0.193476] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[ 0.196099] PCI: Using configuration type 1 for base access
[ 0.196514] bio: create slab <bio-0> at 0
[ 0.196582] ACPI: Added _OSI(Module Device)
[ 0.196615] ACPI: Added _OSI(Processor Device)
[ 0.196648] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.196683] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.197237] ACPI: EC: Look up EC in DSDT
[ 0.237871] ACPI: SSDT 00000000db7dc771 003BA (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
[ 0.238098] ACPI: Dynamic OEM Table Load:
[ 0.238139] ACPI: SSDT (null) 003BA (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
[ 0.269769] ACPI: SSDT 00000000db7dc399 003D8 (v01 COMPAQ CST 00000001 MSFT 0100000E)
[ 0.269982] ACPI: Dynamic OEM Table Load:
[ 0.270022] ACPI: SSDT (null) 003D8 (v01 COMPAQ CST 00000001 MSFT 0100000E)
[ 0.317762] ACPI: Interpreter enabled
[ 0.317795] ACPI: (supports S0 S3 S4 S5)
[ 0.317852] ACPI: Using IOAPIC for interrupt routing
[ 0.335430] ACPI: No dock devices found.
[ 0.335464] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.335673] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20120913/dsfield-211)
[ 0.335750] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880113442668), AE_ALREADY_EXISTS (20120913/psparse-536)
[ 0.335838] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[ 0.335908] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20120913/nspredef-359)
[ 0.335987] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.336198] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.336288] PCI host bridge to bus 0000:00
[ 0.336813] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.336849] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfdffffff]
[ 0.336888] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.336926] pci_bus 0000:00: root bus resource [io 0x1000-0x2fff]
[ 0.336964] pci_bus 0000:00: root bus resource [io 0x3000-0x6fff]
[ 0.337002] pci_bus 0000:00: root bus resource [io 0x7000-0xafff]
[ 0.337040] pci_bus 0000:00: root bus resource [io 0xb000-0xffff]
[ 0.337077] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.337117] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf3ffffff]
[ 0.337156] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 0.337201] pci 0000:00:00.0: [8086:0040] type 00 class 0x060000
[ 0.337214] DMAR: Disabling batched IOTLB flush on Ironlake
[ 0.337263] pci 0000:00:02.0: [8086:0042] type 00 class 0x030000
[ 0.337271] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.337275] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.337278] pci 0000:00:02.0: reg 20: [io 0x1170-0x1177]
[ 0.337320] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.337345] pci 0000:00:16.0: reg 10: [mem 0xf0427100-0xf042710f 64bit]
[ 0.337432] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.337453] pci 0000:00:16.3: [8086:3b67] type 00 class 0x070002
[ 0.337467] pci 0000:00:16.3: reg 10: [io 0x1188-0x118f]
[ 0.337474] pci 0000:00:16.3: reg 14: [mem 0xf0424000-0xf0424fff]
[ 0.337559] pci 0000:00:19.0: [8086:10ef] type 00 class 0x020000
[ 0.337573] pci 0000:00:19.0: reg 10: [mem 0xf0400000-0xf041ffff]
[ 0.337579] pci 0000:00:19.0: reg 14: [mem 0xf0425000-0xf0425fff]
[ 0.337585] pci 0000:00:19.0: reg 18: [io 0x1100-0x111f]
[ 0.337634] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.337652] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.337669] pci 0000:00:1a.0: reg 10: [mem 0xf0426800-0xf0426bff]
[ 0.337742] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.337762] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.337773] pci 0000:00:1b.0: reg 10: [mem 0xf0420000-0xf0423fff 64bit]
[ 0.337825] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.337842] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.337894] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.337913] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[ 0.337964] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.337981] pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400
[ 0.338032] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.338053] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.338069] pci 0000:00:1d.0: reg 10: [mem 0xf0426c00-0xf0426fff]
[ 0.338140] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.338156] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.338203] pci 0000:00:1f.0: [8086:3b0a] type 00 class 0x060100
[ 0.338306] pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601
[ 0.338320] pci 0000:00:1f.2: reg 10: [io 0x1190-0x1197]
[ 0.338325] pci 0000:00:1f.2: reg 14: [io 0x11a8-0x11ab]
[ 0.338331] pci 0000:00:1f.2: reg 18: [io 0x1198-0x119f]
[ 0.338337] pci 0000:00:1f.2: reg 1c: [io 0x11ac-0x11af]
[ 0.338342] pci 0000:00:1f.2: reg 20: [io 0x1120-0x113f]
[ 0.338349] pci 0000:00:1f.2: reg 24: [mem 0xf0426000-0xf04267ff]
[ 0.338383] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.338423] pci 0000:00:1c.0: PCI bridge to [bus 18]
[ 0.338492] pci 0000:00:1c.4: PCI bridge to [bus 24]
[ 0.338562] pci 0000:00:1c.6: PCI bridge to [bus 30]
[ 0.338647] pci 0000:00:1e.0: PCI bridge to [bus 0d] (subtractive decode)
[ 0.338691] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfdffffff] (subtractive decode)
[ 0.338692] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.338694] pci 0000:00:1e.0: bridge window [io 0x1000-0x2fff] (subtractive decode)
[ 0.338695] pci 0000:00:1e.0: bridge window [io 0x3000-0x6fff] (subtractive decode)
[ 0.338696] pci 0000:00:1e.0: bridge window [io 0x7000-0xafff] (subtractive decode)
[ 0.338697] pci 0000:00:1e.0: bridge window [io 0xb000-0xffff] (subtractive decode)
[ 0.338698] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.338699] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf3ffffff] (subtractive decode)
[ 0.338700] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.338713] pci_bus 0000:00: on NUMA node 0
[ 0.338716] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.338803] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
[ 0.338828] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX5._PRT]
[ 0.338850] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX7._PRT]
[ 0.338872] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[ 0.338951] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20120913/dsfield-211)
[ 0.339027] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880113442668), AE_ALREADY_EXISTS (20120913/psparse-536)
[ 0.339117] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20120913/nspredef-359)
[ 0.339195] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.339255] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.342389] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.342499] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.342604] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.342709] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.342813] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.342918] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.343023] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.343127] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.343270] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.343333] vgaarb: loaded
[ 0.343361] vgaarb: bridge control possible 0000:00:02.0
[ 0.343426] SCSI subsystem initialized
[ 0.343458] ACPI: bus type scsi registered
[ 0.343509] libata version 3.00 loaded.
[ 0.343523] PCI: Using ACPI for IRQ routing
[ 0.344659] PCI: Discovered peer bus 3f
[ 0.344691] PCI: root bus 3f: using default resources
[ 0.344692] PCI: Probing PCI hardware (bus 3f)
[ 0.344705] PCI host bridge to bus 0000:3f
[ 0.344739] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
[ 0.344777] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.344817] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
[ 0.344880] pci 0000:3f:00.0: [8086:2c61] type 00 class 0x060000
[ 0.344893] pci 0000:3f:00.1: [8086:2d01] type 00 class 0x060000
[ 0.344907] pci 0000:3f:02.0: [8086:2d10] type 00 class 0x060000
[ 0.344918] pci 0000:3f:02.1: [8086:2d11] type 00 class 0x060000
[ 0.344930] pci 0000:3f:02.2: [8086:2d12] type 00 class 0x060000
[ 0.344942] pci 0000:3f:02.3: [8086:2d13] type 00 class 0x060000
[ 0.344960] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
[ 0.345022] PCI: pci_cache_line_size set to 64 bytes
[ 0.345055] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.345056] e820: reserve RAM buffer [mem 0xdb7ac440-0xdbffffff]
[ 0.345118] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.345193] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.347232] Switching to clocksource hpet
[ 0.347295] pnp: PnP ACPI init
[ 0.347330] ACPI: bus type pnp registered
[ 0.347461] pnp 00:00: [mem 0xf8000000-0xfdffffff window]
[ 0.347462] pnp 00:00: [bus 00-ff]
[ 0.347464] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.347465] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.347466] pnp 00:00: [io 0x1000-0x2fff window]
[ 0.347467] pnp 00:00: [io 0x3000-0x6fff window]
[ 0.347468] pnp 00:00: [io 0x7000-0xafff window]
[ 0.347469] pnp 00:00: [io 0xb000-0xffff window]
[ 0.347470] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.347471] pnp 00:00: [mem 0xe0000000-0xf3ffffff window]
[ 0.347473] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.347487] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.347493] pnp 00:01: [io 0x00f0-0x00ff]
[ 0.347499] pnp 00:01: [irq 13]
[ 0.347509] pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.347516] pnp 00:02: [io 0x0000-0x000f]
[ 0.347517] pnp 00:02: [io 0x0080-0x008f]
[ 0.347518] pnp 00:02: [io 0x00c0-0x00df]
[ 0.347519] pnp 00:02: [dma 4]
[ 0.347527] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.347531] pnp 00:03: [io 0x0070-0x0071]
[ 0.347535] pnp 00:03: [irq 8]
[ 0.347544] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.347548] pnp 00:04: [io 0x0061]
[ 0.347556] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.347564] pnp 00:05: [irq 12]
[ 0.347573] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
[ 0.347578] pnp 00:06: [io 0x0060]
[ 0.347579] pnp 00:06: [io 0x0064]
[ 0.347582] pnp 00:06: [irq 1]
[ 0.347591] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.347739] pnp 00:07: [irq 7]
[ 0.347740] pnp 00:07: [dma 3]
[ 0.347741] pnp 00:07: [io 0x0378-0x037f]
[ 0.347742] pnp 00:07: [io 0x0778-0x077d]
[ 0.347778] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.347896] pnp 00:08: [irq 4]
[ 0.347897] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.347931] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[ 0.347961] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.347971] pnp 00:09: Plug and Play ACPI device, IDs PNP0003 (active)
[ 0.347976] pnp 00:0a: [io 0x004e-0x004f]
[ 0.347977] pnp 00:0a: [io 0x0cb0-0x0cbb]
[ 0.347978] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.347987] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.348006] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
[ 0.348015] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.348113] pnp 00:0c: [io 0x0010-0x001f]
[ 0.348114] pnp 00:0c: [io 0x0050-0x0053]
[ 0.348115] pnp 00:0c: [io 0x0072-0x0077]
[ 0.348116] pnp 00:0c: [io 0x0090-0x009f]
[ 0.348133] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.348144] pnp 00:0d: [io 0x04d0-0x04d1]
[ 0.348160] system 00:0d: [io 0x04d0-0x04d1] has been reserved
[ 0.348198] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.348207] pnp 00:0e: [io 0x0400-0x041f]
[ 0.348208] pnp 00:0e: [io 0x0420-0x043f]
[ 0.348209] pnp 00:0e: [io 0x0440-0x045f]
[ 0.348210] pnp 00:0e: [io 0x0460-0x047f]
[ 0.348211] pnp 00:0e: [io 0x0480-0x048f]
[ 0.348212] pnp 00:0e: [io 0xf800-0xf81f]
[ 0.348213] pnp 00:0e: [io 0xf820-0xf83f]
[ 0.348214] pnp 00:0e: [io 0xf840-0xf85f]
[ 0.348215] pnp 00:0e: [io 0xf860-0xf87f]
[ 0.348216] pnp 00:0e: [io 0xfa00-0xfa3f]
[ 0.348217] pnp 00:0e: [io 0xfc00-0xfc7f]
[ 0.348218] pnp 00:0e: [io 0xfc80-0xfcff]
[ 0.348220] pnp 00:0e: [io 0xfe00-0xfe7f]
[ 0.348221] pnp 00:0e: [io 0xfe80-0xfeff]
[ 0.348238] system 00:0e: [io 0x0400-0x041f] has been reserved
[ 0.348275] system 00:0e: [io 0x0420-0x043f] has been reserved
[ 0.348312] system 00:0e: [io 0x0440-0x045f] has been reserved
[ 0.348350] system 00:0e: [io 0x0460-0x047f] has been reserved
[ 0.348387] system 00:0e: [io 0x0480-0x048f] has been reserved
[ 0.348424] system 00:0e: [io 0xf800-0xf81f] has been reserved
[ 0.348462] system 00:0e: [io 0xf820-0xf83f] has been reserved
[ 0.348499] system 00:0e: [io 0xf840-0xf85f] has been reserved
[ 0.348536] system 00:0e: [io 0xf860-0xf87f] has been reserved
[ 0.348574] system 00:0e: [io 0xfa00-0xfa3f] has been reserved
[ 0.348611] system 00:0e: [io 0xfc00-0xfc7f] has been reserved
[ 0.348649] system 00:0e: [io 0xfc80-0xfcff] has been reserved
[ 0.348686] system 00:0e: [io 0xfe00-0xfe7f] has been reserved
[ 0.348723] system 00:0e: [io 0xfe80-0xfeff] has been reserved
[ 0.348761] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.348914] pnp 00:0f: [mem 0x00000000-0x0009ffff]
[ 0.348915] pnp 00:0f: [mem 0x00100000-0xdfffffff]
[ 0.348916] pnp 00:0f: [mem 0x000e4000-0x000fffff]
[ 0.348917] pnp 00:0f: [mem 0xfec01000-0xfecfffff]
[ 0.348918] pnp 00:0f: [mem 0xfed00400-0xfed3ffff]
[ 0.348919] pnp 00:0f: [mem 0xfed45000-0xffffffff]
[ 0.348920] pnp 00:0f: [mem 0xf4000000-0xf7ffffff]
[ 0.348922] pnp 00:0f: [mem 0x000cfe00-0x000e3fff]
[ 0.348943] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.348985] system 00:0f: [mem 0x00100000-0xdfffffff] could not be reserved
[ 0.349024] system 00:0f: [mem 0x000e4000-0x000fffff] could not be reserved
[ 0.349064] system 00:0f: [mem 0xfec01000-0xfecfffff] has been reserved
[ 0.349103] system 00:0f: [mem 0xfed00400-0xfed3ffff] has been reserved
[ 0.349142] system 00:0f: [mem 0xfed45000-0xffffffff] has been reserved
[ 0.349181] system 00:0f: [mem 0xf4000000-0xf7ffffff] has been reserved
[ 0.349220] system 00:0f: [mem 0x000cfe00-0x000e3fff] has been reserved
[ 0.349260] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.349267] pnp: PnP ACPI: found 16 devices
[ 0.349299] ACPI: ACPI bus type pnp unregistered
[ 0.354300] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 18] add_size 1000
[ 0.354303] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 18] add_size 200000
[ 0.354305] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 18] add_size 200000
[ 0.354310] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 24] add_size 1000
[ 0.354312] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 24] add_size 200000
[ 0.354313] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 24] add_size 200000
[ 0.354319] pci 0000:00:1c.6: bridge window [io 0x1000-0x0fff] to [bus 30] add_size 1000
[ 0.354320] pci 0000:00:1c.6: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 30] add_size 200000
[ 0.354322] pci 0000:00:1c.6: bridge window [mem 0x00100000-0x000fffff] to [bus 30] add_size 200000
[ 0.354331] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.354333] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.354334] pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.354335] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.354337] pci 0000:00:1c.6: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.354338] pci 0000:00:1c.6: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.354339] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.354341] pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.354342] pci 0000:00:1c.6: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.354344] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff]
[ 0.354385] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref]
[ 0.354446] pci 0000:00:1c.4: BAR 14: assigned [mem 0xf8400000-0xf85fffff]
[ 0.354486] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf8600000-0xf87fffff 64bit pref]
[ 0.354546] pci 0000:00:1c.6: BAR 14: assigned [mem 0xf8800000-0xf89fffff]
[ 0.354586] pci 0000:00:1c.6: BAR 15: assigned [mem 0xf8a00000-0xf8bfffff 64bit pref]
[ 0.354648] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.354686] pci 0000:00:1c.4: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.354725] pci 0000:00:1c.6: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.354764] pci 0000:00:1c.0: PCI bridge to [bus 18]
[ 0.354799] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.354839] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf81fffff]
[ 0.354880] pci 0000:00:1c.0: bridge window [mem 0xf8200000-0xf83fffff 64bit pref]
[ 0.354943] pci 0000:00:1c.4: PCI bridge to [bus 24]
[ 0.354978] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.355018] pci 0000:00:1c.4: bridge window [mem 0xf8400000-0xf85fffff]
[ 0.355058] pci 0000:00:1c.4: bridge window [mem 0xf8600000-0xf87fffff 64bit pref]
[ 0.355121] pci 0000:00:1c.6: PCI bridge to [bus 30]
[ 0.355157] pci 0000:00:1c.6: bridge window [io 0x4000-0x4fff]
[ 0.355196] pci 0000:00:1c.6: bridge window [mem 0xf8800000-0xf89fffff]
[ 0.355237] pci 0000:00:1c.6: bridge window [mem 0xf8a00000-0xf8bfffff 64bit pref]
[ 0.355304] pci 0000:00:1e.0: PCI bridge to [bus 0d]
[ 0.355363] pci 0000:00:1e.0: setting latency timer to 64
[ 0.355366] pci_bus 0000:00: resource 4 [mem 0xf8000000-0xfdffffff]
[ 0.355367] pci_bus 0000:00: resource 5 [io 0x0000-0x0cf7]
[ 0.355368] pci_bus 0000:00: resource 6 [io 0x1000-0x2fff]
[ 0.355369] pci_bus 0000:00: resource 7 [io 0x3000-0x6fff]
[ 0.355370] pci_bus 0000:00: resource 8 [io 0x7000-0xafff]
[ 0.355371] pci_bus 0000:00: resource 9 [io 0xb000-0xffff]
[ 0.355373] pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff]
[ 0.355374] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xf3ffffff]
[ 0.355375] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff]
[ 0.355376] pci_bus 0000:18: resource 0 [io 0x2000-0x2fff]
[ 0.355377] pci_bus 0000:18: resource 1 [mem 0xf8000000-0xf81fffff]
[ 0.355378] pci_bus 0000:18: resource 2 [mem 0xf8200000-0xf83fffff 64bit pref]
[ 0.355380] pci_bus 0000:24: resource 0 [io 0x3000-0x3fff]
[ 0.355381] pci_bus 0000:24: resource 1 [mem 0xf8400000-0xf85fffff]
[ 0.355382] pci_bus 0000:24: resource 2 [mem 0xf8600000-0xf87fffff 64bit pref]
[ 0.355383] pci_bus 0000:30: resource 0 [io 0x4000-0x4fff]
[ 0.355384] pci_bus 0000:30: resource 1 [mem 0xf8800000-0xf89fffff]
[ 0.355385] pci_bus 0000:30: resource 2 [mem 0xf8a00000-0xf8bfffff 64bit pref]
[ 0.355387] pci_bus 0000:0d: resource 4 [mem 0xf8000000-0xfdffffff]
[ 0.355388] pci_bus 0000:0d: resource 5 [io 0x0000-0x0cf7]
[ 0.355389] pci_bus 0000:0d: resource 6 [io 0x1000-0x2fff]
[ 0.355390] pci_bus 0000:0d: resource 7 [io 0x3000-0x6fff]
[ 0.355391] pci_bus 0000:0d: resource 8 [io 0x7000-0xafff]
[ 0.355392] pci_bus 0000:0d: resource 9 [io 0xb000-0xffff]
[ 0.355393] pci_bus 0000:0d: resource 10 [mem 0x000a0000-0x000bffff]
[ 0.355395] pci_bus 0000:0d: resource 11 [mem 0xe0000000-0xf3ffffff]
[ 0.355396] pci_bus 0000:0d: resource 12 [mem 0xfed40000-0xfed44fff]
[ 0.355397] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
[ 0.355398] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.355415] NET: Registered protocol family 2
[ 0.355534] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.356236] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.356473] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.356541] TCP: reno registered
[ 0.356573] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.356623] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.356729] NET: Registered protocol family 1
[ 0.356773] pci 0000:00:02.0: Boot video device
[ 0.356848] PCI: CLS 64 bytes, default 64
[ 0.356863] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.356903] software IO TLB [mem 0xd77aa000-0xdb7a9fff] (64MB) mapped at [ffff8800d77aa000-ffff8800db7a9fff]
[ 0.357322] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.358082] VFS: Disk quotas dquot_6.5.2
[ 0.358139] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.358343] msgmni has been set to 7504
[ 0.358530] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.358591] io scheduler noop registered
[ 0.358623] io scheduler deadline registered
[ 0.358658] io scheduler cfq registered (default)
[ 0.358814] intel_idle: MWAIT substates: 0x1120
[ 0.358815] intel_idle: v0.4 model 0x25
[ 0.358816] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.358877] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.358940] ACPI: Power Button [PBTN]
[ 0.358993] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.359053] ACPI: Power Button [PWRF]
[ 0.359107] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.379497] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.399797] 0000:00:16.3: ttyS1 at I/O 0x1188 (irq = 17) is a 16550A
[ 0.399935] Linux agpgart interface v0.103
[ 0.399998] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 0.400071] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.400775] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 0.400886] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 0.400960] [drm] Initialized drm 1.1.0 20060810
[ 0.401108] i915 0000:00:02.0: setting latency timer to 64
[ 0.413696] i915 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.413701] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.413740] [drm] Driver supports precise vblank timestamp query.
[ 0.413802] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.503304] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 17
[ 0.503366] Raw EDID:
[ 0.503395] 00 ff ff ff ff ff ff 00 22 f0 49 29 00 00 00 00
[ 0.503431] 15 15 01 04 a5 33 1d 78 26 01 f5 a2 57 52 9f 27
[ 0.503468] 0a 50 54 a1 08 00 81 c0 81 80 95 00 b3 00 d1 c0
[ 0.503504] 01 01 01 01 01 01 02 3a 80 18 71 38 2d 40 58 2c
[ 0.503540] 45 00 fe 1f 11 00 00 1e 00 00 00 fd 00 32 4c 18
[ 0.503577] 5e 11 00 0a 20 20 20 20 20 20 00 00 00 fc 00 48
[ 0.503614] 50 20 4c 41 32 33 30 36 0a 20 20 20 00 11 ff 00
[ 0.503651] 43 4e 43 31 32 31 31 32 50 42 0a 20 20 00 5a 00
[ 0.530984] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 15
[ 0.531046] Raw EDID:
[ 0.531074] 00 ff ff ff ff ff ff 00 22 f0 49 29 00 00 00 00
[ 0.531111] 15 15 01 04 a5 33 1d 78 26 01 f5 a2 57 52 9f 27
[ 0.531147] 0a 50 54 a1 08 00 81 c0 81 80 95 00 b3 00 d1 c0
[ 0.531183] 01 01 01 11 01 02 3a 80 18 71 38 2d 40 58 2c 45
[ 0.531220] 00 fe 1f 11 00 00 1e 00 00 00 fd 00 32 4c 18 5e
[ 0.531257] 11 00 0a 20 20 20 20 20 20 00 00 00 fc 00 48 50
[ 0.531293] 20 4c 41 32 33 30 36 0a 20 20 20 00 00 00 ff 00
[ 0.531330] 43 4e 43 31 32 31 31 32 50 42 0a 20 20 00 5a 00
[ 0.585843] fbcon: inteldrmfb (fb0) is primary device
[ 0.735007] [drm:intel_dp_complete_link_train] *ERROR* failed to train DP, aborting
[ 0.893611] ------------[ cut here ]------------
[ 0.893615] WARNING: at drivers/gpu/drm/i915/intel_display.c:1009 ironlake_crtc_disable+0xaf/0x8e0()
[ 0.893616] Hardware name: HP Compaq 8100 Elite SFF PC
[ 0.893616] pipe_off wait timed out
[ 0.893617] Modules linked in:
[ 0.893618] Pid: 1, comm: swapper/0 Not tainted 3.7.0-rc5 #70
[ 0.893619] Call Trace:
[ 0.893623] [<ffffffff81036899>] ? warn_slowpath_common+0x79/0xc0
[ 0.893624] [<ffffffff81036995>] ? warn_slowpath_fmt+0x45/0x50
[ 0.893626] [<ffffffff812b57cb>] ? intel_wait_for_pipe_off+0x5b/0x170
[ 0.893627] [<ffffffff812b617f>] ? ironlake_crtc_disable+0xaf/0x8e0
[ 0.893629] [<ffffffff812c5499>] ? intel_dp_mode_fixup+0x249/0x270
[ 0.893630] [<ffffffff812bce86>] ? intel_set_mode+0x306/0x920
[ 0.893632] [<ffffffff812bdb91>] ? intel_crtc_set_config+0x6f1/0x950
[ 0.893635] [<ffffffff81442241>] ? __mutex_lock_slowpath+0xd1/0x140
[ 0.893639] [<ffffffff81274f3f>] ? drm_fb_helper_set_par+0x6f/0xe0
[ 0.893642] [<ffffffff8120c29f>] ? fbcon_init+0x55f/0x5f0
[ 0.893644] [<ffffffff8125aa6c>] ? visual_init+0xac/0x110
[ 0.893645] [<ffffffff8125c2cc>] ? bind_con_driver+0x16c/0x340
[ 0.893647] [<ffffffff8125c500>] ? take_over_console+0x60/0x70
[ 0.893648] [<ffffffff8120a64b>] ? fbcon_takeover+0x5b/0xc0
[ 0.893651] [<ffffffff81059375>] ? notifier_call_chain+0x45/0x60
[ 0.893652] [<ffffffff81059555>] ? __blocking_notifier_call_chain+0x55/0x80
[ 0.893653] [<ffffffff81203c3f>] ? register_framebuffer+0x1af/0x2e0
[ 0.893655] [<ffffffff812751a4>] ? drm_fb_helper_single_fb_probe+0x1f4/0x320
[ 0.893656] [<ffffffff81275479>] ? drm_fb_helper_initial_config+0x1a9/0x220
[ 0.893659] [<ffffffff810dd04d>] ? __kmalloc+0xed/0x130
[ 0.893661] [<ffffffff812d684d>] ? intel_fbdev_init+0x7d/0xb0
[ 0.893663] [<ffffffff81298935>] ? i915_driver_load+0xd95/0xf00
[ 0.893666] [<ffffffff81283a85>] ? drm_get_pci_dev+0x185/0x2c0
[ 0.893667] [<ffffffff811f3821>] ? pci_device_probe+0xd1/0x170
[ 0.893669] [<ffffffff812e9878>] ? driver_probe_device+0x68/0x220
[ 0.893670] [<ffffffff812e9ac3>] ? __driver_attach+0x93/0xa0
[ 0.893671] [<ffffffff812e9a30>] ? driver_probe_device+0x220/0x220
[ 0.893673] [<ffffffff812e7d0d>] ? bus_for_each_dev+0x4d/0x80
[ 0.893674] [<ffffffff812e8fe8>] ? bus_add_driver+0x178/0x260
[ 0.893675] [<ffffffff812ea0c4>] ? driver_register+0x84/0x180
[ 0.893678] [<ffffffff8188c7a7>] ? drm_core_init+0x12f/0x12f
[ 0.893680] [<ffffffff810002e2>] ? do_one_initcall+0x122/0x170
[ 0.893682] [<ffffffff8142ba5c>] ? kernel_init+0x11c/0x2a0
[ 0.893684] [<ffffffff8186c54a>] ? do_early_param+0x83/0x83
[ 0.893686] [<ffffffff8105e761>] ? schedule_tail+0x21/0xb0
[ 0.893686] [<ffffffff8142b940>] ? rest_init+0x70/0x70
[ 0.893688] [<ffffffff814448ac>] ? ret_from_fork+0x7c/0xb0
[ 0.893689] [<ffffffff8142b940>] ? rest_init+0x70/0x70
[ 0.893693] ---[ end trace dee2e32e6b8520d3 ]---
[ 0.949441] [drm:intel_disable_transcoder] *ERROR* failed to disable transcoder 0
[ 1.184415] Console: switching to colour frame buffer device 240x67
[ 1.199099] fb0: inteldrmfb frame buffer device
[ 1.200483] drm: registered panic notifier
[ 1.201895] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20120913/video-1149)
[ 1.203270] ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no)
[ 1.204648] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2
[ 1.206015] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.207421] ahci 0000:00:1f.2: version 3.0
[ 1.207462] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 1.207509] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x17 impl SATA mode
[ 1.208875] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part sxs apst
[ 1.210243] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.210555] scsi0 : ahci
[ 1.211952] scsi1 : ahci
[ 1.213316] scsi2 : ahci
[ 1.214647] scsi3 : ahci
[ 1.215948] scsi4 : ahci
[ 1.217224] scsi5 : ahci
[ 1.218451] ata1: SATA max UDMA/133 abar m2048 at 0xf0426000 port 0xf0426100 irq 41
[ 1.219665] ata2: SATA max UDMA/133 abar m2048 at 0xf0426000 port 0xf0426180 irq 41
[ 1.220864] ata3: SATA max UDMA/133 abar m2048 at 0xf0426000 port 0xf0426200 irq 41
[ 1.222041] ata4: DUMMY
[ 1.223217] ata5: SATA max UDMA/133 abar m2048 at 0xf0426000 port 0xf0426300 irq 41
[ 1.224412] ata6: DUMMY
[ 1.225659] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 1.229396] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.230614] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.231877] mousedev: PS/2 mouse device common for all mice
[ 1.233116] rtc_cmos 00:03: RTC can wake from S4
[ 1.234400] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.235620] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.236869] cpuidle: using governor ladder
[ 1.238124] cpuidle: using governor menu
[ 1.239398] TCP: cubic registered
[ 1.240672] NET: Registered protocol family 10
[ 1.241980] mip6: Mobile IPv6
[ 1.243187] NET: Registered protocol family 17
[ 1.244413] Key type dns_resolver registered
[ 1.245732] PM: Hibernation image not present or could not be loaded.
[ 1.245739] registered taskstats version 1
[ 1.247242] rtc_cmos 00:03: setting system clock to 2012-11-12 19:25:53 UTC (1352748353)
[ 1.352279] tsc: Refined TSC clocksource calibration: 3325.374 MHz
[ 1.353591] Switching to clocksource tsc
[ 1.543709] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.545562] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.547106] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 1.548403] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[ 1.549699] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.551005] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.552363] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[ 1.552562] ata1.00: ACPI cmd e3/00:00:00:00:00:a0 (IDLE) succeeded
[ 1.552569] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.553951] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.555278] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.556672] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 1.558257] ata2.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[ 1.560110] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.561910] ata2.00: ATAPI: hp CDDVDW TS-H653T, H6D1, max UDMA/100
[ 1.563965] ata1.00: ATA-8: Hitachi HDS721025CLA682, JP1OA41A, max UDMA/133
[ 1.565894] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.567888] ata1.00: failed to get Identify Device Data, Emask 0x1
[ 1.569013] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 1.570586] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[ 1.572492] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 1.573839] ata2.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[ 1.575177] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.576516] ata2.00: configured for UDMA/100
[ 1.577853] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[ 1.578048] ata1.00: ACPI cmd e3/00:00:00:00:00:a0 (IDLE) succeeded
[ 1.578055] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.579511] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.580904] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.583461] ata1.00: failed to get Identify Device Data, Emask 0x1
[ 1.583467] ata1.00: configured for UDMA/133
[ 1.585167] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72102 JP1O PQ: 0 ANSI: 5
[ 1.586728] ACPI: Invalid Power Resource to register!
[ 1.586782] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.588324] sd 0:0:0:0: [sda] Write Protect is off
[ 1.588625] scsi 1:0:0:0: CD-ROM hp CDDVDW TS-H653T H6D1 PQ: 0 ANSI: 5
[ 1.591175] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.591187] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.636557] sda: sda1 sda2 < sda5 >
[ 1.638153] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.752690] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.754138] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
[ 1.756068] Freeing unused kernel memory: 492k freed
[ 1.757555] Write protecting the kernel read-only data: 8192k
[ 1.761768] Freeing unused kernel memory: 1748k freed
[ 1.764548] Freeing unused kernel memory: 688k freed
[ 4.397122] ACPI: Invalid PBLK length [7]
[ 4.398638] ACPI: Requesting acpi_cpufreq
[ 4.400259] ACPI: Invalid PBLK length [7]
[ 4.401708] ACPI: Invalid PBLK length [7]
[ 4.403196] ACPI: Invalid PBLK length [7]
[ 4.512678] microcode: CPU0 sig=0x20655, pf=0x2, revision=0x2
[ 4.583332] e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
[ 4.584728] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
[ 4.586151] e1000e 0000:00:19.0: setting latency timer to 64
[ 4.586193] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 4.587668] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 4.647552] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
[ 4.649353] microcode: CPU1 sig=0x20655, pf=0x2, revision=0x2
[ 4.651281] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
[ 4.653088] microcode: CPU2 sig=0x20655, pf=0x2, revision=0x2
[ 4.654646] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
[ 4.656074] microcode: CPU3 sig=0x20655, pf=0x2, revision=0x2
[ 4.657622] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
[ 4.659065] microcode: Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
[ 4.715596] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 4.726013] wmi: Mapper loaded
[ 4.735019] parport_pc 00:07: reported by Plug and Play ACPI
[ 1.588752] ACPI: Invalid Power Resource to register!
[ 4.736514] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 4.782458] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 78:e3:b5:a0:e5:e4
[ 4.783839] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 4.785272] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 9, PBA No: A002FF-0FF
[ 4.786690] mei 0000:00:16.0: setting latency timer to 64
[ 4.786734] mei 0000:00:16.0: irq 43 for MSI/MSI-X
[ 4.804492] gpio_ich: GPIO from 180 to 255 on gpio_ich
[ 4.833861] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16)
[ 4.856997] iTCO_vendor_support: vendor-support=0
[ 4.866955] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 4.869116] iTCO_wdt: Found a Q57 TCO device (Version=2, TCOBASE=0xf860)
[ 4.871242] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.917771] ACPI: bus type usb registered
[ 4.919140] usbcore: registered new interface driver usbfs
[ 4.920514] usbcore: registered new interface driver hub
[ 4.921983] usbcore: registered new device driver usb
[ 4.971948] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.973621] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 4.973626] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 4.976492] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 4.983276] ehci_hcd 0000:00:1a.0: debug port 2
[ 4.986115] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 4.986216] ehci_hcd 0000:00:1a.0: irq 20, io mem 0xf0426800
[ 4.997185] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 4.999240] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.001372] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.003446] usb usb1: Product: EHCI Host Controller
[ 5.005557] usb usb1: Manufacturer: Linux 3.7.0-rc5 ehci_hcd
[ 5.007635] usb usb1: SerialNumber: 0000:00:1a.0
[ 5.009834] hub 1-0:1.0: USB hub found
[ 5.011235] hub 1-0:1.0: 3 ports detected
[ 5.012738] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.012740] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 5.014143] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 5.019419] ehci_hcd 0000:00:1d.0: debug port 2
[ 5.020848] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 5.020857] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xf0426c00
[ 5.030762] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.032147] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.033498] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 5.033636] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.034833] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.036196] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.037636] usb usb2: Product: EHCI Host Controller
[ 5.039195] usb usb2: Manufacturer: Linux 3.7.0-rc5 ehci_hcd
[ 5.040751] usb usb2: SerialNumber: 0000:00:1d.0
[ 5.042375] hub 2-0:1.0: USB hub found
[ 5.043648] hub 2-0:1.0: 3 ports detected
[ 5.084925] tpm_tis 00:0a: TPM is disabled/deactivated (0x7)
[ 5.185048] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.186362] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.320186] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 5.328880] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 5.452402] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 5.454376] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.456529] hub 1-1:1.0: USB hub found
[ 5.458208] hub 1-1:1.0: 6 ports detected
[ 5.510155] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 5.571008] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 5.571413] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 5.703342] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 5.704626] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.706068] hub 2-1:1.0: USB hub found
[ 5.707474] hub 2-1:1.0: 8 ports detected
[ 5.778892] usb 1-1.1: new high-speed USB device number 3 using ehci_hcd
[ 5.870981] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2512
[ 5.873831] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.876863] hub 1-1.1:1.0: USB hub found
[ 5.880531] hub 1-1.1:1.0: 2 ports detected
[ 5.954494] usb 1-1.2: new low-speed USB device number 4 using ehci_hcd
[ 6.075265] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c30e
[ 6.076703] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.078051] usb 1-1.2: Product: HID compliant keyboard
[ 6.079314] usb 1-1.2: Manufacturer: Logitech
[ 6.392908] usbcore: registered new interface driver usbhid
[ 6.395341] usbhid: USB HID core driver
[ 6.407429] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5
[ 6.408786] hid-generic 0003:046D:C30E.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:1a.0-1.2/input0
[ 6.413203] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input6
[ 6.414607] hid-generic 0003:046D:C30E.0002: input,hidraw1: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:1a.0-1.2/input1
[ 6.690917] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 6.694022] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 6.697137] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 6.700257] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 6.703315] input: HDA Intel MID Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 7.753385] Adding 7532540k swap on /dev/sda5. Priority:-1 extents:1 across:7532540k
[ 7.781064] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 7.996172] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 8.429058] fuse init (API version 7.20)
[ 8.457251] loop: module loaded
[ 12.646029] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 12.749589] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 12.749705] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.222562] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 14.225828] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[ 14.233041] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.380159] lp0: using parport0 (interrupt-driven).
--
Meelis Roos (mroos at linux.ee)
More information about the dri-devel
mailing list