[PATCH v8 2/6] video: add of helper for videomode
Steffen Trumtrar
s.trumtrar at pengutronix.de
Tue Nov 13 02:53:27 PST 2012
On Mon, Nov 12, 2012 at 11:00:37PM +0400, Alexey Klimov wrote:
> Hello Steffen,
>
> On Mon, Nov 12, 2012 at 7:37 PM, Steffen Trumtrar
> <s.trumtrar at pengutronix.de> wrote:
> > This adds support for reading display timings from DT or/and convert one of those
> > timings to a videomode.
> > The of_display_timing implementation supports multiple children where each
> > property can have up to 3 values. All children are read into an array, that
> > can be queried.
> > of_get_videomode converts exactly one of that timings to a struct videomode.
> >
> > Signed-off-by: Steffen Trumtrar <s.trumtrar at pengutronix.de>
> > Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
> > ---
> > .../devicetree/bindings/video/display-timings.txt | 107 +++++++++++
> > drivers/video/Kconfig | 13 ++
> > drivers/video/Makefile | 2 +
> > drivers/video/of_display_timing.c | 186 ++++++++++++++++++++
> > drivers/video/of_videomode.c | 47 +++++
> > include/linux/of_display_timings.h | 19 ++
> > include/linux/of_videomode.h | 15 ++
> > 7 files changed, 389 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/video/display-timings.txt
> > create mode 100644 drivers/video/of_display_timing.c
> > create mode 100644 drivers/video/of_videomode.c
> > create mode 100644 include/linux/of_display_timings.h
> > create mode 100644 include/linux/of_videomode.h
> >
> > diff --git a/Documentation/devicetree/bindings/video/display-timings.txt b/Documentation/devicetree/bindings/video/display-timings.txt
> > new file mode 100644
> > index 0000000..e22e2fd
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/video/display-timings.txt
> > @@ -0,0 +1,107 @@
> > +display-timings bindings
> > +========================
> > +
> > +display-timings-node
> > +--------------------
> > +
> > +required properties:
> > + - none
> > +
> > +optional properties:
> > + - native-mode: the native mode for the display, in case multiple modes are
> > + provided. When omitted, assume the first node is the native.
> > +
> > +timings-subnode
> > +---------------
> > +
> > +required properties:
> > + - hactive, vactive: Display resolution
> > + - hfront-porch, hback-porch, hsync-len: Horizontal Display timing parameters
> > + in pixels
> > + vfront-porch, vback-porch, vsync-len: Vertical display timing parameters in
> > + lines
> > + - clock-frequency: displayclock in Hz
> > +
> > +optional properties:
> > + - hsync-active : Hsync pulse is active low/high/ignored
> > + - vsync-active : Vsync pulse is active low/high/ignored
> > + - de-active : Data-Enable pulse is active low/high/ignored
> > + - pixelclk-inverted : pixelclock is inverted/non-inverted/ignored
> > + - interlaced (bool)
> > + - doublescan (bool)
> > +
> > +All the optional properties that are not bool follow the following logic:
> > + <1> : high active
> > + <0> : low active
> > + omitted : not used on hardware
> > +
> > +There are different ways of describing the capabilities of a display. The devicetree
> > +representation corresponds to the one commonly found in datasheets for displays.
> > +If a display supports multiple signal timings, the native-mode can be specified.
> > +
> > +The parameters are defined as
> > +
> > +struct display_timing
> > +=====================
> > +
> > + +----------+---------------------------------------------+----------+-------+
> > + | | ↑ | | |
> > + | | |vback_porch | | |
> > + | | ↓ | | |
> > + +----------###############################################----------+-------+
> > + | # ↑ # | |
> > + | # | # | |
> > + | hback # | # hfront | hsync |
> > + | porch # | hactive # porch | len |
> > + |<-------->#<---------------+--------------------------->#<-------->|<----->|
> > + | # | # | |
> > + | # |vactive # | |
> > + | # | # | |
> > + | # ↓ # | |
> > + +----------###############################################----------+-------+
> > + | | ↑ | | |
> > + | | |vfront_porch | | |
> > + | | ↓ | | |
> > + +----------+---------------------------------------------+----------+-------+
> > + | | ↑ | | |
> > + | | |vsync_len | | |
> > + | | ↓ | | |
> > + +----------+---------------------------------------------+----------+-------+
> > +
> > +
> > +Example:
> > +
> > + display-timings {
> > + native-mode = <&timing0>;
> > + timing0: 1920p24 {
> > + /* 1920x1080p24 */
> > + clock-frequency = <52000000>;
> > + hactive = <1920>;
> > + vactive = <1080>;
> > + hfront-porch = <25>;
> > + hback-porch = <25>;
> > + hsync-len = <25>;
> > + vback-porch = <2>;
> > + vfront-porch = <2>;
> > + vsync-len = <2>;
> > + hsync-active = <1>;
> > + };
> > + };
> > +
> > +Every required property also supports the use of ranges, so the commonly used
> > +datasheet description with <min typ max>-tuples can be used.
> > +
> > +Example:
> > +
> > + timing1: timing {
> > + /* 1920x1080p24 */
> > + clock-frequency = <148500000>;
> > + hactive = <1920>;
> > + vactive = <1080>;
> > + hsync-len = <0 44 60>;
> > + hfront-porch = <80 88 95>;
> > + hback-porch = <100 148 160>;
> > + vfront-porch = <0 4 6>;
> > + vback-porch = <0 36 50>;
> > + vsync-len = <0 5 6>;
> > + };
> > diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
> > index 2a23b18..a324457 100644
> > --- a/drivers/video/Kconfig
> > +++ b/drivers/video/Kconfig
> > @@ -39,6 +39,19 @@ config DISPLAY_TIMING
> > config VIDEOMODE
> > bool
> >
> > +config OF_DISPLAY_TIMING
> > + def_bool y
> > + select DISPLAY_TIMING
> > + help
> > + helper to parse display timings from the devicetree
> > +
> > +config OF_VIDEOMODE
> > + def_bool y
> > + select VIDEOMODE
> > + select OF_DISPLAY_TIMING
> > + help
> > + helper to get videomodes from the devicetree
> > +
> > menuconfig FB
> > tristate "Support for frame buffer devices"
> > ---help---
> > diff --git a/drivers/video/Makefile b/drivers/video/Makefile
> > index fc30439..b936b00 100644
> > --- a/drivers/video/Makefile
> > +++ b/drivers/video/Makefile
> > @@ -168,4 +168,6 @@ obj-$(CONFIG_FB_VIRTUAL) += vfb.o
> > #video output switch sysfs driver
> > obj-$(CONFIG_VIDEO_OUTPUT_CONTROL) += output.o
> > obj-$(CONFIG_DISPLAY_TIMING) += display_timing.o
> > +obj-$(CONFIG_OF_DISPLAY_TIMING) += of_display_timing.o
> > obj-$(CONFIG_VIDEOMODE) += videomode.o
> > +obj-$(CONFIG_OF_VIDEOMODE) += of_videomode.o
> > diff --git a/drivers/video/of_display_timing.c b/drivers/video/of_display_timing.c
> > new file mode 100644
> > index 0000000..0bd30cc
> > --- /dev/null
> > +++ b/drivers/video/of_display_timing.c
> > @@ -0,0 +1,186 @@
> > +/*
> > + * OF helpers for parsing display timings
> > + *
> > + * Copyright (c) 2012 Steffen Trumtrar <s.trumtrar at pengutronix.de>, Pengutronix
> > + *
> > + * based on of_videomode.c by Sascha Hauer <s.hauer at pengutronix.de>
> > + *
> > + * This file is released under the GPLv2
> > + */
> > +#include <linux/of.h>
> > +#include <linux/slab.h>
> > +#include <linux/export.h>
> > +#include <linux/of_display_timings.h>
> > +
> > +/**
> > + * parse_property - parse timing_entry from device_node
> > + * @np: device_node with the property
> > + * @name: name of the property
> > + * @result: will be set to the return value
> > + *
> > + * DESCRIPTION:
> > + * Every display_timing can be specified with either just the typical value or
> > + * a range consisting of min/typ/max. This function helps handling this
> > + **/
> > +static int parse_property(struct device_node *np, char *name,
> > + struct timing_entry *result)
> > +{
> > + struct property *prop;
> > + int length, cells, ret;
> > +
> > + prop = of_find_property(np, name, &length);
> > + if (!prop) {
> > + pr_err("%s: could not find property %s\n", __func__, name);
> > + return -EINVAL;
> > + }
> > +
> > + cells = length / sizeof(u32);
> > + if (cells == 1) {
> > + ret = of_property_read_u32(np, name, &result->typ);
> > + result->min = result->typ;
> > + result->max = result->typ;
> > + } else if (cells == 3) {
> > + ret = of_property_read_u32_array(np, name, &result->min, cells);
> > + } else {
> > + pr_err("%s: illegal timing specification in %s\n", __func__, name);
> > + return -EINVAL;
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +/**
> > + * of_get_display_timing - parse display_timing entry from device_node
> > + * @np: device_node with the properties
> > + **/
> > +static struct display_timing *of_get_display_timing(struct device_node *np)
> > +{
> > + struct display_timing *dt;
> > + int ret = 0;
> > +
> > + dt = kzalloc(sizeof(*dt), GFP_KERNEL);
> > + if (!dt) {
> > + pr_err("%s: could not allocate display_timing struct\n", __func__);
> > + return NULL;
> > + }
> > +
> > + ret |= parse_property(np, "hback-porch", &dt->hback_porch);
> > + ret |= parse_property(np, "hfront-porch", &dt->hfront_porch);
> > + ret |= parse_property(np, "hactive", &dt->hactive);
> > + ret |= parse_property(np, "hsync-len", &dt->hsync_len);
> > + ret |= parse_property(np, "vback-porch", &dt->vback_porch);
> > + ret |= parse_property(np, "vfront-porch", &dt->vfront_porch);
> > + ret |= parse_property(np, "vactive", &dt->vactive);
> > + ret |= parse_property(np, "vsync-len", &dt->vsync_len);
> > + ret |= parse_property(np, "clock-frequency", &dt->pixelclock);
> > +
> > + of_property_read_u32(np, "vsync-active", &dt->vsync_pol_active);
> > + of_property_read_u32(np, "hsync-active", &dt->hsync_pol_active);
> > + of_property_read_u32(np, "de-active", &dt->de_pol_active);
> > + of_property_read_u32(np, "pixelclk-inverted", &dt->pixelclk_pol);
> > + dt->interlaced = of_property_read_bool(np, "interlaced");
> > + dt->doublescan = of_property_read_bool(np, "doublescan");
> > +
> > + if (ret) {
> > + pr_err("%s: error reading timing properties\n", __func__);
> > + return NULL;
> > + }
> > +
> > + return dt;
> > +}
> > +
> > +/**
> > + * of_get_display_timings - parse all display_timing entries from a device_node
> > + * @np: device_node with the subnodes
> > + **/
> > +struct display_timings *of_get_display_timings(struct device_node *np)
> > +{
> > + struct device_node *timings_np;
> > + struct device_node *entry;
> > + struct device_node *native_mode;
> > + struct display_timings *disp;
> > +
> > + if (!np) {
> > + pr_err("%s: no devicenode given\n", __func__);
> > + return NULL;
> > + }
> > +
> > + timings_np = of_find_node_by_name(np, "display-timings");
> > + if (!timings_np) {
> > + pr_err("%s: could not find display-timings node\n", __func__);
> > + return NULL;
> > + }
> > +
> > + disp = kzalloc(sizeof(*disp), GFP_KERNEL);
> > + if (!disp)
> > + return -ENOMEM;
> > +
> > + entry = of_parse_phandle(timings_np, "native-mode", 0);
> > + /* assume first child as native mode if none provided */
> > + if (!entry)
> > + entry = of_get_next_child(np, NULL);
> > + if (!entry) {
> > + pr_err("%s: no timing specifications given\n", __func__);
> > + return NULL;
> > + }
> > +
> > + pr_info("%s: using %s as default timing\n", __func__, entry->name);
> > +
> > + native_mode = entry;
> > +
> > + disp->num_timings = of_get_child_count(timings_np);
> > + disp->timings = kzalloc(sizeof(struct display_timing *)*disp->num_timings,
> > + GFP_KERNEL);
> > + if (!disp->timings)
> > + return -ENOMEM;
>
> Could you please check return values here ^^^ and above "disp =
> kzalloc(sizeof(*disp), GFP_KERNEL);" ?
> May be it's better to return NULL instead of -ENOMEM and put error message?
>
I will do that along with the memory leak fixes.
Regards,
Steffen
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the dri-devel
mailing list