[PATCHv13 4/7] fbmon: add videomode helpers

[Laurent Pinchart]

Hi Steffen,

On Thursday 22 November 2012 17:00:12 Steffen Trumtrar wrote:
> Add a function to convert from the generic videomode to a fb_videomode.
> 
> Signed-off-by: Steffen Trumtrar <s.trumtrar at pengutronix.de>
> Reviewed-by: Thierry Reding <thierry.reding at avionic-design.de>
> Acked-by: Thierry Reding <thierry.reding at avionic-design.de>
> Tested-by: Thierry Reding <thierry.reding at avionic-design.de>
> Tested-by: Philipp Zabel <p.zabel at pengutronix.de>
> Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> Acked-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> Signed-off-by: Steffen Trumtrar <s.trumtrar at pengutronix.de>
> ---
>  drivers/video/fbmon.c |   44 ++++++++++++++++++++++++++++++++++++++++++++
>  include/linux/fb.h    |    6 ++++++
>  2 files changed, 50 insertions(+)
> 
> diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
> index cef6557..a6a564d 100644
> --- a/drivers/video/fbmon.c
> +++ b/drivers/video/fbmon.c
> @@ -31,6 +31,7 @@
>  #include <linux/pci.h>
>  #include <linux/slab.h>
>  #include <video/edid.h>
> +#include <linux/videomode.h>
>  #ifdef CONFIG_PPC_OF
>  #include <asm/prom.h>
>  #include <asm/pci-bridge.h>
> @@ -1373,6 +1374,49 @@ int fb_get_mode(int flags, u32 val, struct
> fb_var_screeninfo *var, struct fb_inf kfree(timings);
>  	return err;
>  }
> +
> +#if IS_ENABLED(CONFIG_VIDEOMODE)
> +int fb_videomode_from_videomode(const struct videomode *vm,
> +				struct fb_videomode *fbmode)
> +{
> +	unsigned int htotal, vtotal;
> +
> +	fbmode->xres = vm->hactive;
> +	fbmode->left_margin = vm->hback_porch;
> +	fbmode->right_margin = vm->hfront_porch;
> +	fbmode->hsync_len = vm->hsync_len;
> +
> +	fbmode->yres = vm->vactive;
> +	fbmode->upper_margin = vm->vback_porch;
> +	fbmode->lower_margin = vm->vfront_porch;
> +	fbmode->vsync_len = vm->vsync_len;
> +
> +	fbmode->pixclock = KHZ2PICOS(vm->pixelclock / 1000);

This results in a division by 0 if vm->pixelclock is equal to zero. As the 
information is missing from many board files, what would you think about the 
following ?

	fbmode->pixclock = vm->pixelclock ? KHZ2PICOS(vm->pixelclock / 1000) : 0;

> +
> +	fbmode->sync = 0;
> +	fbmode->vmode = 0;
> +	if (vm->hah)
> +		fbmode->sync |= FB_SYNC_HOR_HIGH_ACT;
> +	if (vm->vah)
> +		fbmode->sync |= FB_SYNC_VERT_HIGH_ACT;
> +	if (vm->interlaced)
> +		fbmode->vmode |= FB_VMODE_INTERLACED;
> +	if (vm->doublescan)
> +		fbmode->vmode |= FB_VMODE_DOUBLE;
> +	fbmode->flag = 0;
> +
> +	htotal = vm->hactive + vm->hfront_porch + vm->hback_porch +
> +		 vm->hsync_len;
> +	vtotal = vm->vactive + vm->vfront_porch + vm->vback_porch +
> +		 vm->vsync_len;
> +	fbmode->refresh = vm->pixelclock / (htotal * vtotal);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(fb_videomode_from_videomode);
> +#endif
> +
> +
>  #else
>  int fb_parse_edid(unsigned char *edid, struct fb_var_screeninfo *var)
>  {
> diff --git a/include/linux/fb.h b/include/linux/fb.h
> index c7a9571..4404ec2 100644
> --- a/include/linux/fb.h
> +++ b/include/linux/fb.h
> @@ -19,6 +19,7 @@ struct vm_area_struct;
>  struct fb_info;
>  struct device;
>  struct file;
> +struct videomode;
> 
>  /* Definitions below are used in the parsed monitor specs */
>  #define FB_DPMS_ACTIVE_OFF	1
> @@ -714,6 +715,11 @@ extern void fb_destroy_modedb(struct fb_videomode
> *modedb); extern int fb_find_mode_cvt(struct fb_videomode *mode, int
> margins, int rb); extern unsigned char *fb_ddc_read(struct i2c_adapter
> *adapter);
> 
> +#if IS_ENABLED(CONFIG_VIDEOMODE)
> +extern int fb_videomode_from_videomode(const struct videomode *vm,
> +				       struct fb_videomode *fbmode);
> +#endif
> +
>  /* drivers/video/modedb.c */
>  #define VESA_MODEDB_SIZE 34
>  extern void fb_var_to_videomode(struct fb_videomode *mode,
-- 
Regards,

Laurent Pinchart