[Bug 51021] New: Matrox g200 driver mgag200 doesn't work with FS PRIMERGY RX200 S4

[bugzilla-daemon at bugzilla.kernel.org]

https://bugzilla.kernel.org/show_bug.cgi?id=51021

           Summary: Matrox g200 driver mgag200 doesn't work with FS
                    PRIMERGY RX200 S4
           Product: Drivers
           Version: 2.5
    Kernel Version: 3.6.7
          Platform: All
        OS/Version: Linux
              Tree: Mainline
            Status: NEW
          Severity: normal
          Priority: P1
         Component: Video(DRI - non Intel)
        AssignedTo: drivers_video-dri at kernel-bugs.osdl.org
        ReportedBy: igor.sverkos+kernel at googlemail.com
        Regression: No


Created an attachment (id=87311)
 --> (https://bugzilla.kernel.org/attachment.cgi?id=87311)
This is how the display looks when  the mgag200 is loaded

Hi,

sorry - don't know how to better phrase "doesn't work". With doesn't work I
mean, that my screen will look like the attached screenshot.

Relevant lspci output:

rx200s4 ~ # lspci -s 1b: -nn
1b:00.0 VGA compatible controller [0300]: Matrox Electronics Systems Ltd. MGA
G200e [Pilot] ServerEngines (SEP1) [102b:0522] (rev 02)
rx200s4 ~ # lspci -s 1b: -xxvv
1b:00.0 VGA compatible controller: Matrox Electronics Systems Ltd. MGA G200e
[Pilot] ServerEngines (SEP1) (rev 02) (prog-if 00 [VGA controller])
    Subsystem: Fujitsu Technology Solutions Device 108e
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort+
<MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 18
    Region 0: Memory at f6000000 (32-bit, prefetchable) [size=16M]
    Region 1: Memory at fc000000 (32-bit, non-prefetchable) [size=16K]
    Region 2: Memory at fc800000 (32-bit, non-prefetchable) [size=8M]
    Expansion ROM at <unassigned> [disabled]
    Capabilities: [dc] Power Management version 2
        Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [e4] Express (v1) Legacy Endpoint, MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1
<1us
            ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
        DevCtl:    Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
            RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
        LnkCap:    Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0
<64ns, L1 <1us
            ClockPM- Surprise- LLActRep- BwNot-
        LnkCtl:    ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
    Capabilities: [54] MSI: Enable- Count=1/1 Maskable- 64bit-
        Address: 00000000  Data: 0000
    Kernel driver in use: mgag200
00: 2b 10 22 05 47 01 10 10 02 00 00 03 10 00 00 00
10: 08 00 00 f6 00 00 00 fc 00 00 80 fc 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 34 17 8e 10
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 00 00

-- 
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.