[PATCH] gma600: Enable HDMI support
Alan Cox
alan at lxorguk.ukuu.org.uk
Thu Oct 4 09:16:35 PDT 2012
From: Alan Cox <alan at linux.intel.com>
There are still some mysteries left, in particular how (and in
fact if) the EDID is supposed to work on the HDMI port. However
the basic stuff now works and I can plug my Q550 into an HDMI
display and get the expected results.
[v2: cleans up space/tab and other formatting as per Dave's
request]
Signed-off-by: Alan Cox <alan at linux.intel.com>
---
drivers/gpu/drm/gma500/oaktrail.h | 6
drivers/gpu/drm/gma500/oaktrail_crtc.c | 8 +
drivers/gpu/drm/gma500/oaktrail_device.c | 2
drivers/gpu/drm/gma500/oaktrail_hdmi.c | 365 +++++++++++++++++++++++++++++-
4 files changed, 365 insertions(+), 16 deletions(-)
diff --git a/drivers/gpu/drm/gma500/oaktrail.h b/drivers/gpu/drm/gma500/oaktrail.h
index f2f9f38..30adbbe 100644
--- a/drivers/gpu/drm/gma500/oaktrail.h
+++ b/drivers/gpu/drm/gma500/oaktrail.h
@@ -249,3 +249,9 @@ extern void oaktrail_hdmi_i2c_exit(struct pci_dev *dev);
extern void oaktrail_hdmi_save(struct drm_device *dev);
extern void oaktrail_hdmi_restore(struct drm_device *dev);
extern void oaktrail_hdmi_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev);
+extern int oaktrail_crtc_hdmi_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode, int x, int y,
+ struct drm_framebuffer *old_fb);
+extern void oaktrail_crtc_hdmi_dpms(struct drm_crtc *crtc, int mode);
+
+
diff --git a/drivers/gpu/drm/gma500/oaktrail_crtc.c b/drivers/gpu/drm/gma500/oaktrail_crtc.c
index cdafd2a..4ec2962 100644
--- a/drivers/gpu/drm/gma500/oaktrail_crtc.c
+++ b/drivers/gpu/drm/gma500/oaktrail_crtc.c
@@ -168,6 +168,11 @@ static void oaktrail_crtc_dpms(struct drm_crtc *crtc, int mode)
const struct psb_offset *map = &dev_priv->regmap[pipe];
u32 temp;
+ if (pipe == 1) {
+ oaktrail_crtc_hdmi_dpms(crtc, mode);
+ return;
+ }
+
if (!gma_power_begin(dev, true))
return;
@@ -302,6 +307,9 @@ static int oaktrail_crtc_mode_set(struct drm_crtc *crtc,
uint64_t scalingType = DRM_MODE_SCALE_FULLSCREEN;
struct drm_connector *connector;
+ if (pipe == 1)
+ return oaktrail_crtc_hdmi_mode_set(crtc, mode, adjusted_mode, x, y, old_fb);
+
if (!gma_power_begin(dev, true))
return 0;
diff --git a/drivers/gpu/drm/gma500/oaktrail_device.c b/drivers/gpu/drm/gma500/oaktrail_device.c
index 010b8207..08747fd 100644
--- a/drivers/gpu/drm/gma500/oaktrail_device.c
+++ b/drivers/gpu/drm/gma500/oaktrail_device.c
@@ -544,7 +544,7 @@ const struct psb_ops oaktrail_chip_ops = {
.accel_2d = 1,
.pipes = 2,
.crtcs = 2,
- .hdmi_mask = (1 << 0),
+ .hdmi_mask = (1 << 1),
.lvds_mask = (1 << 0),
.cursor_needs_phys = 0,
.sgx_offset = MRST_SGX_OFFSET,
diff --git a/drivers/gpu/drm/gma500/oaktrail_hdmi.c b/drivers/gpu/drm/gma500/oaktrail_hdmi.c
index 69e51e9..f036f1f 100644
--- a/drivers/gpu/drm/gma500/oaktrail_hdmi.c
+++ b/drivers/gpu/drm/gma500/oaktrail_hdmi.c
@@ -155,6 +155,345 @@ static void oaktrail_hdmi_audio_disable(struct drm_device *dev)
HDMI_READ(HDMI_HCR);
}
+static void wait_for_vblank(struct drm_device *dev)
+{
+ /* Wait for 20ms, i.e. one cycle at 50hz. */
+ mdelay(20);
+}
+
+static unsigned int htotal_calculate(struct drm_display_mode *mode)
+{
+ u32 htotal, new_crtc_htotal;
+
+ htotal = (mode->crtc_hdisplay - 1) | ((mode->crtc_htotal - 1) << 16);
+
+ /*
+ * 1024 x 768 new_crtc_htotal = 0x1024;
+ * 1280 x 1024 new_crtc_htotal = 0x0c34;
+ */
+ new_crtc_htotal = (mode->crtc_htotal - 1) * 200 * 1000 / mode->clock;
+
+ DRM_DEBUG_KMS("new crtc htotal 0x%4x\n", new_crtc_htotal);
+ return (mode->crtc_hdisplay - 1) | (new_crtc_htotal << 16);
+}
+
+static void oaktrail_hdmi_find_dpll(struct drm_crtc *crtc, int target,
+ int refclk, struct oaktrail_hdmi_clock *best_clock)
+{
+ int np_min, np_max, nr_min, nr_max;
+ int np, nr, nf;
+
+ np_min = DIV_ROUND_UP(oaktrail_hdmi_limit.vco.min, target * 10);
+ np_max = oaktrail_hdmi_limit.vco.max / (target * 10);
+ if (np_min < oaktrail_hdmi_limit.np.min)
+ np_min = oaktrail_hdmi_limit.np.min;
+ if (np_max > oaktrail_hdmi_limit.np.max)
+ np_max = oaktrail_hdmi_limit.np.max;
+
+ nr_min = DIV_ROUND_UP((refclk * 1000), (target * 10 * np_max));
+ nr_max = DIV_ROUND_UP((refclk * 1000), (target * 10 * np_min));
+ if (nr_min < oaktrail_hdmi_limit.nr.min)
+ nr_min = oaktrail_hdmi_limit.nr.min;
+ if (nr_max > oaktrail_hdmi_limit.nr.max)
+ nr_max = oaktrail_hdmi_limit.nr.max;
+
+ np = DIV_ROUND_UP((refclk * 1000), (target * 10 * nr_max));
+ nr = DIV_ROUND_UP((refclk * 1000), (target * 10 * np));
+ nf = DIV_ROUND_CLOSEST((target * 10 * np * nr), refclk);
+ DRM_DEBUG_KMS("np, nr, nf %d %d %d\n", np, nr, nf);
+
+ /*
+ * 1024 x 768 np = 1; nr = 0x26; nf = 0x0fd8000;
+ * 1280 x 1024 np = 1; nr = 0x17; nf = 0x1034000;
+ */
+ best_clock->np = np;
+ best_clock->nr = nr - 1;
+ best_clock->nf = (nf << 14);
+}
+
+static void scu_busy_loop(void __iomem *scu_base)
+{
+ u32 status = 0;
+ u32 loop_count = 0;
+
+ status = readl(scu_base + 0x04);
+ while (status & 1) {
+ udelay(1); /* scu processing time is in few u secods */
+ status = readl(scu_base + 0x04);
+ loop_count++;
+ /* break if scu doesn't reset busy bit after huge retry */
+ if (loop_count > 1000) {
+ DRM_DEBUG_KMS("SCU IPC timed out");
+ return;
+ }
+ }
+}
+
+/*
+ * You don't want to know, you really really don't want to know....
+ *
+ * This is magic. However it's safe magic because of the way the platform
+ * works and it is necessary magic.
+ */
+static void oaktrail_hdmi_reset(struct drm_device *dev)
+{
+ void __iomem *base;
+ unsigned long scu_ipc_mmio = 0xff11c000UL;
+ int scu_len = 1024;
+
+ base = ioremap((resource_size_t)scu_ipc_mmio, scu_len);
+ if (base == NULL) {
+ DRM_ERROR("failed to map scu mmio\n");
+ return;
+ }
+
+ /* scu ipc: assert hdmi controller reset */
+ writel(0xff11d118, base + 0x0c);
+ writel(0x7fffffdf, base + 0x80);
+ writel(0x42005, base + 0x0);
+ scu_busy_loop(base);
+
+ /* scu ipc: de-assert hdmi controller reset */
+ writel(0xff11d118, base + 0x0c);
+ writel(0x7fffffff, base + 0x80);
+ writel(0x42005, base + 0x0);
+ scu_busy_loop(base);
+
+ iounmap(base);
+}
+
+int oaktrail_crtc_hdmi_mode_set(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode,
+ int x, int y,
+ struct drm_framebuffer *old_fb)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ struct oaktrail_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv;
+ int pipe = 1;
+ int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
+ int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
+ int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
+ int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
+ int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
+ int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
+ int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE;
+ int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS;
+ int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
+ int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
+ int refclk;
+ struct oaktrail_hdmi_clock clock;
+ u32 dspcntr, pipeconf, dpll, temp;
+ int dspcntr_reg = DSPBCNTR;
+
+ if (!gma_power_begin(dev, true))
+ return 0;
+
+ /* Disable the VGA plane that we never use */
+ REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
+
+ /* Disable dpll if necessary */
+ dpll = REG_READ(DPLL_CTRL);
+ if ((dpll & DPLL_PWRDN) == 0) {
+ REG_WRITE(DPLL_CTRL, dpll | (DPLL_PWRDN | DPLL_RESET));
+ REG_WRITE(DPLL_DIV_CTRL, 0x00000000);
+ REG_WRITE(DPLL_STATUS, 0x1);
+ }
+ udelay(150);
+
+ /* Reset controller */
+ oaktrail_hdmi_reset(dev);
+
+ /* program and enable dpll */
+ refclk = 25000;
+ oaktrail_hdmi_find_dpll(crtc, adjusted_mode->clock, refclk, &clock);
+
+ /* Set the DPLL */
+ dpll = REG_READ(DPLL_CTRL);
+ dpll &= ~DPLL_PDIV_MASK;
+ dpll &= ~(DPLL_PWRDN | DPLL_RESET);
+ REG_WRITE(DPLL_CTRL, 0x00000008);
+ REG_WRITE(DPLL_DIV_CTRL, ((clock.nf << 6) | clock.nr));
+ REG_WRITE(DPLL_ADJUST, ((clock.nf >> 14) - 1));
+ REG_WRITE(DPLL_CTRL, (dpll | (clock.np << DPLL_PDIV_SHIFT) | DPLL_ENSTAT | DPLL_DITHEN));
+ REG_WRITE(DPLL_UPDATE, 0x80000000);
+ REG_WRITE(DPLL_CLK_ENABLE, 0x80050102);
+ udelay(150);
+
+ /* configure HDMI */
+ HDMI_WRITE(0x1004, 0x1fd);
+ HDMI_WRITE(0x2000, 0x1);
+ HDMI_WRITE(0x2008, 0x0);
+ HDMI_WRITE(0x3130, 0x8);
+ HDMI_WRITE(0x101c, 0x1800810);
+
+ temp = htotal_calculate(adjusted_mode);
+ REG_WRITE(htot_reg, temp);
+ REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) | ((adjusted_mode->crtc_hblank_end - 1) << 16));
+ REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) | ((adjusted_mode->crtc_hsync_end - 1) << 16));
+ REG_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) | ((adjusted_mode->crtc_vtotal - 1) << 16));
+ REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) | ((adjusted_mode->crtc_vblank_end - 1) << 16));
+ REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16));
+ REG_WRITE(pipesrc_reg, ((mode->crtc_hdisplay - 1) << 16) | (mode->crtc_vdisplay - 1));
+
+ REG_WRITE(PCH_HTOTAL_B, (adjusted_mode->crtc_hdisplay - 1) | ((adjusted_mode->crtc_htotal - 1) << 16));
+ REG_WRITE(PCH_HBLANK_B, (adjusted_mode->crtc_hblank_start - 1) | ((adjusted_mode->crtc_hblank_end - 1) << 16));
+ REG_WRITE(PCH_HSYNC_B, (adjusted_mode->crtc_hsync_start - 1) | ((adjusted_mode->crtc_hsync_end - 1) << 16));
+ REG_WRITE(PCH_VTOTAL_B, (adjusted_mode->crtc_vdisplay - 1) | ((adjusted_mode->crtc_vtotal - 1) << 16));
+ REG_WRITE(PCH_VBLANK_B, (adjusted_mode->crtc_vblank_start - 1) | ((adjusted_mode->crtc_vblank_end - 1) << 16));
+ REG_WRITE(PCH_VSYNC_B, (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16));
+ REG_WRITE(PCH_PIPEBSRC, ((mode->crtc_hdisplay - 1) << 16) | (mode->crtc_vdisplay - 1));
+
+ temp = adjusted_mode->crtc_hblank_end - adjusted_mode->crtc_hblank_start;
+ HDMI_WRITE(HDMI_HBLANK_A, ((adjusted_mode->crtc_hdisplay - 1) << 16) | temp);
+
+ REG_WRITE(dspsize_reg, ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1));
+ REG_WRITE(dsppos_reg, 0);
+
+ /* Flush the plane changes */
+ {
+ struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+ crtc_funcs->mode_set_base(crtc, x, y, old_fb);
+ }
+
+ /* Set up the display plane register */
+ dspcntr = REG_READ(dspcntr_reg);
+ dspcntr |= DISPPLANE_GAMMA_ENABLE;
+ dspcntr |= DISPPLANE_SEL_PIPE_B;
+ dspcntr |= DISPLAY_PLANE_ENABLE;
+
+ /* setup pipeconf */
+ pipeconf = REG_READ(pipeconf_reg);
+ pipeconf |= PIPEACONF_ENABLE;
+
+ REG_WRITE(pipeconf_reg, pipeconf);
+ REG_READ(pipeconf_reg);
+
+ REG_WRITE(PCH_PIPEBCONF, pipeconf);
+ REG_READ(PCH_PIPEBCONF);
+ wait_for_vblank(dev);
+
+ REG_WRITE(dspcntr_reg, dspcntr);
+ wait_for_vblank(dev);
+
+ gma_power_end(dev);
+
+ return 0;
+}
+
+void oaktrail_crtc_hdmi_dpms(struct drm_crtc *crtc, int mode)
+{
+ struct drm_device *dev = crtc->dev;
+ u32 temp;
+
+ DRM_DEBUG_KMS("%s %d\n", __func__, mode);
+
+ switch (mode) {
+ case DRM_MODE_DPMS_OFF:
+ REG_WRITE(VGACNTRL, 0x80000000);
+
+ /* Disable plane */
+ temp = REG_READ(DSPBCNTR);
+ if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
+ REG_WRITE(DSPBCNTR, temp & ~DISPLAY_PLANE_ENABLE);
+ REG_READ(DSPBCNTR);
+ /* Flush the plane changes */
+ REG_WRITE(DSPBSURF, REG_READ(DSPBSURF));
+ REG_READ(DSPBSURF);
+ }
+
+ /* Disable pipe B */
+ temp = REG_READ(PIPEBCONF);
+ if ((temp & PIPEACONF_ENABLE) != 0) {
+ REG_WRITE(PIPEBCONF, temp & ~PIPEACONF_ENABLE);
+ REG_READ(PIPEBCONF);
+ }
+
+ /* Disable LNW Pipes, etc */
+ temp = REG_READ(PCH_PIPEBCONF);
+ if ((temp & PIPEACONF_ENABLE) != 0) {
+ REG_WRITE(PCH_PIPEBCONF, temp & ~PIPEACONF_ENABLE);
+ REG_READ(PCH_PIPEBCONF);
+ }
+
+ /* wait for pipe off */
+ udelay(150);
+
+ /* Disable dpll */
+ temp = REG_READ(DPLL_CTRL);
+ if ((temp & DPLL_PWRDN) == 0) {
+ REG_WRITE(DPLL_CTRL, temp | (DPLL_PWRDN | DPLL_RESET));
+ REG_WRITE(DPLL_STATUS, 0x1);
+ }
+
+ /* wait for dpll off */
+ udelay(150);
+
+ break;
+ case DRM_MODE_DPMS_ON:
+ case DRM_MODE_DPMS_STANDBY:
+ case DRM_MODE_DPMS_SUSPEND:
+ /* Enable dpll */
+ temp = REG_READ(DPLL_CTRL);
+ if ((temp & DPLL_PWRDN) != 0) {
+ REG_WRITE(DPLL_CTRL, temp & ~(DPLL_PWRDN | DPLL_RESET));
+ temp = REG_READ(DPLL_CLK_ENABLE);
+ REG_WRITE(DPLL_CLK_ENABLE, temp | DPLL_EN_DISP | DPLL_SEL_HDMI | DPLL_EN_HDMI);
+ REG_READ(DPLL_CLK_ENABLE);
+ }
+ /* wait for dpll warm up */
+ udelay(150);
+
+ /* Enable pipe B */
+ temp = REG_READ(PIPEBCONF);
+ if ((temp & PIPEACONF_ENABLE) == 0) {
+ REG_WRITE(PIPEBCONF, temp | PIPEACONF_ENABLE);
+ REG_READ(PIPEBCONF);
+ }
+
+ /* Enable LNW Pipe B */
+ temp = REG_READ(PCH_PIPEBCONF);
+ if ((temp & PIPEACONF_ENABLE) == 0) {
+ REG_WRITE(PCH_PIPEBCONF, temp | PIPEACONF_ENABLE);
+ REG_READ(PCH_PIPEBCONF);
+ }
+
+ wait_for_vblank(dev);
+
+ /* Enable plane */
+ temp = REG_READ(DSPBCNTR);
+ if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
+ REG_WRITE(DSPBCNTR, temp | DISPLAY_PLANE_ENABLE);
+ /* Flush the plane changes */
+ REG_WRITE(DSPBSURF, REG_READ(DSPBSURF));
+ REG_READ(DSPBSURF);
+ }
+
+ psb_intel_crtc_load_lut(crtc);
+ }
+
+ /* DSPARB */
+ REG_WRITE(DSPARB, 0x00003fbf);
+
+ /* FW1 */
+ REG_WRITE(0x70034, 0x3f880a0a);
+
+ /* FW2 */
+ REG_WRITE(0x70038, 0x0b060808);
+
+ /* FW4 */
+ REG_WRITE(0x70050, 0x08030404);
+
+ /* FW5 */
+ REG_WRITE(0x70054, 0x04040404);
+
+ /* LNC Chicken Bits - Squawk! */
+ REG_WRITE(0x70400, 0x4000);
+
+ return;
+}
+
static void oaktrail_hdmi_dpms(struct drm_encoder *encoder, int mode)
{
static int dpms_mode = -1;
@@ -233,13 +572,15 @@ static const unsigned char raw_edid[] = {
static int oaktrail_hdmi_get_modes(struct drm_connector *connector)
{
- struct drm_device *dev = connector->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
struct i2c_adapter *i2c_adap;
struct edid *edid;
- struct drm_display_mode *mode, *t;
- int i = 0, ret = 0;
+ int ret = 0;
+ /*
+ * FIXME: We need to figure this lot out. In theory we can
+ * read the EDID somehow but I've yet to find working reference
+ * code.
+ */
i2c_adap = i2c_get_adapter(3);
if (i2c_adap == NULL) {
DRM_ERROR("No ddc adapter available!\n");
@@ -253,17 +594,7 @@ static int oaktrail_hdmi_get_modes(struct drm_connector *connector)
drm_mode_connector_update_edid_property(connector, edid);
ret = drm_add_edid_modes(connector, edid);
}
-
- /*
- * prune modes that require frame buffer bigger than stolen mem
- */
- list_for_each_entry_safe(mode, t, &connector->probed_modes, head) {
- if ((mode->hdisplay * mode->vdisplay * 4) >= dev_priv->vram_stolen_size) {
- i++;
- drm_mode_remove(connector, mode);
- }
- }
- return ret - i;
+ return ret;
}
static void oaktrail_hdmi_mode_set(struct drm_encoder *encoder,
@@ -349,6 +680,7 @@ void oaktrail_hdmi_init(struct drm_device *dev,
connector->interlace_allowed = false;
connector->doublescan_allowed = false;
drm_sysfs_connector_add(connector);
+ dev_info(dev->dev, "HDMI initialised.\n");
return;
@@ -403,6 +735,9 @@ void oaktrail_hdmi_setup(struct drm_device *dev)
dev_priv->hdmi_priv = hdmi_dev;
oaktrail_hdmi_audio_disable(dev);
+
+ dev_info(dev->dev, "HDMI hardware present.\n");
+
return;
free:
More information about the dri-devel
mailing list