No subject

[Robert Schwebel]

<tomi.valkeinen at ti.com>, pza
Bcc:
Subject: Re: [PATCH 1/2 v6] of: add helper to parse display timings
Reply-To:
In-Reply-To: <Pine.LNX.4.64.1210042307300.3744 at axis700.grange>
X-Sent-From: Pengutronix Hildesheim
X-URL: http://www.pengutronix.de/
X-IRC: #ptxdist @freenode
X-Accept-Language: de,en
X-Accept-Content-Type: text/plain
X-Uptime: 09:13:09 up 103 days, 22:24, 36 users,  load average: 0,57, 0,60,
 0,61

On Thu, Oct 04, 2012 at 11:35:35PM +0200, Guennadi Liakhovetski wrote:
> > +optional properties:
> > + - hsync-active-high (bool): Hsync pulse is active high
> > + - vsync-active-high (bool): Vsync pulse is active high
>
> For the above two we also considered using bool properties but eventually
> settled down with integer ones:
>
> - hsync-active = <1>
>
> for active-high and 0 for active low. This has the added advantage of
> being able to omit this property in the .dts, which then doesn't mean,
> that the polarity is active low, but rather, that the hsync line is not
> used on this hardware. So, maybe it would be good to use the same binding
> here too?

Philipp, this is the same argumentation as we discussed yesterday for
the dual-link LVDS option, so that one could be modelled in a similar
way.

rsc
-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |