[PATCH 2/3] DRM/Radeon: Add Handling for R200 to TV DAC Load Detection.
Alex Deucher
alexdeucher at gmail.com
Mon Oct 29 06:17:59 PDT 2012
I don't think this patch is correct. R200 did not actually have a TV
dac. It was an external DAC connected via DVO. To do load detection
on it, you'd probably have to mess with the external dac.
Alex
On Mon, Oct 29, 2012 at 8:43 AM, Egbert Eich <eich at suse.de> wrote:
> Signed-off-by: Egbert Eich <eich at suse.de>
> ---
> drivers/gpu/drm/radeon/radeon_legacy_encoders.c | 17 ++++++++++++++++-
> 1 files changed, 16 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
> index a1409e9..ef18569 100644
> --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
> +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
> @@ -679,6 +679,9 @@ static enum drm_connector_status radeon_legacy_primary_dac_detect(struct drm_enc
> if (RREG32(RADEON_DAC_CNTL) & RADEON_DAC_CMP_OUTPUT)
> found = connector_status_connected;
>
> + DRM_DEBUG_KMS("[%s]: Load detected: %s\n", drm_get_encoder_name(encoder),
> + (found == connector_status_connected) ? "yes" : "no");
> +
> /* restore the regs we used */
> WREG32(RADEON_DAC_CNTL, dac_cntl);
> WREG32(RADEON_DAC_MACRO_CNTL, dac_macro_cntl);
> @@ -1420,7 +1423,7 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder
> struct radeon_device *rdev = dev->dev_private;
> uint32_t crtc2_gen_cntl, tv_dac_cntl, dac_cntl2, dac_ext_cntl;
> uint32_t gpiopad_a = 0, pixclks_cntl, tmp;
> - uint32_t disp_output_cntl = 0, disp_hw_debug = 0;
> + uint32_t disp_output_cntl = 0, disp_hw_debug = 0, fp2_gen_cntl = 0;
> enum drm_connector_status found = connector_status_disconnected;
> struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
> struct radeon_encoder_tv_dac *tv_dac = radeon_encoder->enc_priv;
> @@ -1462,6 +1465,8 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder
> if (ASIC_IS_R300(rdev)) {
> gpiopad_a = RREG32(RADEON_GPIOPAD_A);
> disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL);
> + } else if (rdev->family == CHIP_R200) {
> + fp2_gen_cntl = RREG32(RADEON_FP2_GEN_CNTL);
> } else {
> disp_hw_debug = RREG32(RADEON_DISP_HW_DEBUG);
> }
> @@ -1484,6 +1489,11 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder
> tmp = disp_output_cntl & ~RADEON_DISP_TVDAC_SOURCE_MASK;
> tmp |= RADEON_DISP_TVDAC_SOURCE_CRTC2;
> WREG32(RADEON_DISP_OUTPUT_CNTL, tmp);
> + } else if (rdev->family == CHIP_R200) {
> + tmp = fp2_gen_cntl & ~(R200_FP2_SOURCE_SEL_MASK |
> + RADEON_FP2_DVO_RATE_SEL_SDR);
> + tmp |= RADEON_DISP_TV_PATH_SRC_CRTC2;
> + WREG32(RADEON_FP2_GEN_CNTL, tmp);
> } else {
> tmp = disp_hw_debug & ~RADEON_CRT2_DISP1_SEL;
> WREG32(RADEON_DISP_HW_DEBUG, tmp);
> @@ -1524,6 +1534,9 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder
> found = connector_status_connected;
> }
>
> + DRM_DEBUG_KMS("[%s]: Load detected: %s\n", drm_get_encoder_name(encoder),
> + (found == connector_status_connected) ? "yes" : "no");
> +
> /* restore regs we used */
> WREG32(RADEON_DAC_CNTL2, dac_cntl2);
> WREG32(RADEON_DAC_EXT_CNTL, dac_ext_cntl);
> @@ -1533,6 +1546,8 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder
> if (ASIC_IS_R300(rdev)) {
> WREG32(RADEON_DISP_OUTPUT_CNTL, disp_output_cntl);
> WREG32_P(RADEON_GPIOPAD_A, gpiopad_a, ~1);
> + } else if (rdev->family == CHIP_R200) {
> + WREG32(RADEON_FP2_GEN_CNTL, fp2_gen_cntl);
> } else {
> WREG32(RADEON_DISP_HW_DEBUG, disp_hw_debug);
> }
> --
> 1.7.6.3
>
More information about the dri-devel
mailing list